Comparison of maxillary anterior tooth movement between Invisalign and fixed appliances.

INTRODUCTION: This research project aimed to compare the number of maxillary incisors and canine movement between Invisalign and fixed orthodontic appliances using artificial intelligence and identify any limitations of Invisalign. METHODS: Sixty patients (Invisalign, n = 30; braces, n = 30) were randomly selected from the Ohio State University Graduate Orthodontic Clinic archive. Peer Assessment Rating (PAR) analysis was used to indicate the severity of the patients in both groups. To analyze the incisors and canine movement, specific landmarks were identified on incisors and canines using an artificial intelligence framework, two-stage mesh deep learning. Total average tooth movement in the maxilla and individual (incisors and canine) tooth movement in 6 directions (buccolingual, mesiodistal, vertical, tipping, torque, rotation) were then analyzed at a significance level of α = 0.05. RESULTS: Based on the posttreatment Peer Assessment Rating scores, the quality of finished patients in both groups was similar. In maxillary incisors and canines, there was a significant difference in movement between Invisalign and conventional appliances for all 6 movement directions (P <0.05). The greatest differences were with rotation and tipping of the maxillary canine, along with incisor and canine torque. The smallest statistical differences observed for incisors and canines were crown translational tooth movement in the mesiodistal and buccolingual directions. CONCLUSIONS: When comparing fixed orthodontic appliances to Invisalign, patients treated with fixed appliances were found to have significantly more maxillary tooth movement in all directions, especially with rotation and tipping of the maxillary canine.

Posterior crossbite with mandibular asymmetry treated with lingual appliances, maxillary skeletal expanders, and alveolar bone miniscrews.

Posterior crossbite and mandibular asymmetry affect esthetics and function. We report treatment of 3 patients with posterior crossbite with mandibular asymmetry but different anteroposterior and vertical characteristics. Treatment methods included maxillary skeletal expander, miniscrews, and lingual appliances. The results show that by using these appliances, ideal transverse, anteroposterior, and vertical control is possible in patients who have concerns about the esthetics of buccal appliances. Lingual appliances can provide satisfying results when combined with a maxillary skeletal expander and miniscrews in complex patients.

Comparison of clinical outcomes between Invisalign and conventional fixed appliance therapies in adult patients with severe deep overbite treated with nonextraction.

INTRODUCTION: The use of aligner therapy for orthodontic treatment has increased substantially in the past decade. However, no study has compared treatment outcomes between the conventional fixed appliance and Invisalign therapies in patients with a severe deep overbite. METHODS: This study included 50 consecutive adult patients who underwent treatment with either Invisalign (n = 25; mean age, 23.3 ± 8.5 years) or a conventional fixed appliance (n = 25; mean age, 23.1 ± 6.5 years) to correct overbite >5 mm and >60% deep overbite. Cephalometric analysis and peer assessment rating was used to compare the clinical outcome between groups. RESULTS: Cephalometric analysis showed significant differences in N-Me (P = 0.0005) and Mp-L6 (P = 0.0001) between Invisalign and fixed appliance treatment groups. No significant differences were observed in the peer assessment rating analysis or total treatment duration between the 2 groups. CONCLUSIONS: Both Invisalign and conventional fixed appliances were effective in treating patients with a severe deep overbite. Invisalign therapy may be preferable over conventional fixed appliance therapy in patients with high angle and deep overbite. However, because this study had a retrospective design, the results should be viewed with caution.

Stomatognathic functional improvement in a patient with a canted occlusal plane and temporomandibular disorder treated with an edgewise appliance and miniscrews.

Generally, a canted occlusal plane results in esthetic problems, such as an asymmetric mandible with midline deviation, and functional problems, such as temporomandibular disorder (TMD). For many years, orthognathic surgery has been used to level a canted occlusal plane. However, similar effects might be achieved by intruding the posterior teeth using a miniscrew. This case report describes a patient with a canted occlusal plane, mandibular deviation, shifted dental midlines, and TMD treated with an edgewise appliance using miniscrews as anchorage. Vertical control of posterior teeth with miniscrews enabled flattening of the canted occlusal plane. Dental midlines were coincided with the midfacial line, thereby improving smile symmetry. During 4 years of retention, the patient maintained ideal occlusion. Furthermore, TMD symptoms disappeared, and significant improvements in stomatognathic functions were observed compared with those at pretreatment. These results suggest that miniscrews can be used to improve canted occlusal plane and stomatognathic malfunctions.

Evaluation of clinical parameters for the stability of 2 types of miniscrews.

INTRODUCTION: The purpose of this research was to compare insertion techniques and effects on mechanical and clinical parameters between 2 types of miniscrews. METHODS: Forty-four consecutive patients whose orthodontic treatment involved the use of miniscrews (miniscrew A [MA] and miniscrew B [MB]) for anchorage were included in this study. Miniscrews were placed with predrilling or self-drilling; peak maximum insertion torque (MIT) and Periotest values were measured. Cone-beam computed tomography was performed after the insertion of miniscrews and root proximity determination; cortical bone thickness was also analyzed. Periotest values were measured after the application of orthodontic force. RESULTS: Self-drilling produced higher Periotest values (P <0.01) for MA and higher MIT (P <0.01) for MB with closer root proximity (P <0.05). MB had higher MIT and Periotest values with drilling compared with MA (P <0.05); MB also showed closer root proximity (P <0.05). Successful miniscrews had lower MIT (P <0.05) for MB and lower Periotest values (P <0.01) for both MA and MB, with significantly more distant root proximity (P <0.01). Self-drilling produced higher Periotest values at the time of placement (P <0.01) and after 4 weeks (P <0.05) in MA. Drilling produced higher Periotest values for MB at the time of placement (P <0.05). MIT had positive correlations with Periotest values for MB with self-drilling (P <0.01) and with root proximity for MA with drilling (P <0.01). Periotest values had negative correlations with root proximity for MA and the MB group with drilling (P <0.01). CONCLUSIONS: For miniscrews with larger diameters, higher MIT may result in more mobility (higher Periotest values). Drilling can avoid root contact and enhance primary stability, thus producing lower Periotest values.

Understanding Early-Stage Posttraumatic Osteoarthritis for Future Prospects of Diagnosis: from Knee to Temporomandibular Joint.

PURPOSE OF REVIEW: Many mechanical load-bearing joints of the body are prone to posttraumatic osteoarthritis (PTOA), including the knee joint and temporomandibular joint (TMJ). Early detection of PTOA can be beneficial in prevention or alleviating further progression of the disease. RECENT FINDINGS: Various mouse models, similar to those used in development of novel diagnosis strategies for early stages of OA, have been proposed to study early PTOA. While many studies have focused on OA and PTOA in the knee joint, early diagnostic methods for OA and PTOA of the TMJ are still not well established. Previously, we showed that fluorescent near-infrared imaging can diagnose inflammation and cartilage damage in mouse models of knee PTOA. Here we propose that the same approach can be used for early diagnosis of TMJ-PTOA. In this review, we present a brief overview of PTOA, application of relevant mouse models, current imaging methods available to examine TMJ-PTOA, and the prospects of near-infrared optical imaging to diagnose early-stage TMJ-OA.

Lip repositioning surgery for gummy smile: 6-month clinical and radiographic lip dimensional changes.

OBJECTIVES: The present case series aimed to examine lip repositioning surgery (LRS) outcomes related to changes in external and internal upper lip (UL) dimensions, utilizing both conventional clinical and novel radiographic approaches. MATERIALS AND METHODS: Patients (n = 13) diagnosed with hypermobile UL (>8-mm mobility during smile) and excessive gingival display (≥4-mm) were included and assessed at baseline and 6 months postoperatively. Clinical parameters at rest included total lip and internal lip length (vestibular depth). At maximum smile included total lip, philtrum (ergotrid), and vermilion lengths. Cephalometric parameters included anterior maxillary height; lip length; nasolabial angle; anteroposterior lip thickness; internal lip length (vestibular depth); and vestibular fornix position (using novel approach employing radiopaque marker). Linear mixed-effect models, Pearson's correlation, and linear regression were used for statistical analyses. RESULTS: LRS did not affect total UL length at rest (p = 0.418). It resulted in significant internal UL length decrease (-3.8 ± 2.1 mm, p < 0.001) and significant increases of vermilion length (1.9 ± 1.0 mm, p < 0.001) and anteroposterior lip thickness (0.7 ± 0.7 mm, p = 0.002). The clinical and radiographic measurements of total UL length at rest (r ≥ 0.734) and of internal UL length (r ≥ 0.737), and the two radiographic assessments of vestibular depth (r = 0.842), were strongly correlated. CONCLUSIONS: LRS resulted in significant decrease of vestibular depth/internal UL length and in significant increases of UL vertical vermilion length and UL anteroposterior thickness, without affecting total UL length at rest. CLINICAL RELEVANCE: The documented lip dimensional outcomes should help practitioners when treatment-planning LRS and counseling patients seeking treatment for hypermobile UL.

Biomechanical effect of selective osteotomy and corticotomy on orthodontic molar uprighting.

INTRODUCTION: Uprighting mesially tipped molars is often a necessary step before implant placement. However, the orthodontic treatment can be lengthy and discourage patients from choosing implant prostheses. Periodontally accelerated osteogenic orthodontics is reported to facilitate molar movements. This study aimed to evaluate the biomechanical effects of various corticotomy and osteotomy approaches on the uprighting of a mesially tipped mandibular second molar in a 3-dimensional finite element analysis model. METHODS: The initial tooth displacement and periodontal ligament (PDL) strain in 9 finite element analysis models with various corticotomy and osteotomy simulations were compared under 3 intended tooth movement scenarios: distal crown tipping, mesial root movement with restraints, and mesial root movement without restraints. RESULTS: Corticotomy or osteotomy approaches altered the tooth displacement and the PDL strain in all 3 intended molar uprighting scenarios. The 2 most extensive surgical approaches, the combined mesial and distal osteotomy with horizontal corticotomy and the circumferential corticotomy at root apex level, resulted in increased tooth movement but had a distinct impact on PDL strain. CONCLUSIONS: It was revealed that different combinations of corticotomy and osteotomy had a biomechanical impact on orthodontic molar uprighting movements.

Reliability and accuracy of assessing temporary anchorage device-tooth root contact with cone-beam computed tomography.

INTRODUCTION: This study was aimed at investigating the reliability and accuracy of cone-beam computed tomography (CBCT) diagnosis of contact between a temporary anchorage device (TAD) and tooth root and assessing any effect produced by metal brackets, imaging software program, and image segmentation or color enhancement tools. METHODS: Eighteen fresh pig mandibles were used. TADs (Vector, 1.4 × 8 mm) were placed at the buccal intermolar alveolar bone on both sides of the mandibles. With soft tissue kept intact, each mandible underwent CBCT scans (voxel size, 400 µm) before and after placing TADs, and after placing metal brackets on involved molars. Alveolar bone specimens containing the TADs were then exposed to microcomputed tomography (microCT) scans (voxel size, 27 µm) after TAD removal. Two independent raters, blinded of image identity, diagnosed TAD-root contact using ImageJ (National Institutes of Health and the Laboratory for Optical and Computational Instrumentation, University of Wisconsin, Madison, Wis) for microCT; Dolphin (Dolphin Imaging and Management Solutions, Chatsworth, Calif) and Anatomage software programs (Anatomage, Santa Clara, Calif) for CBCT images. Intrarater and interrater reliability and diagnostic accuracy were statistically assessed using Cohen kappa and McNemar tests. RESULTS: Intrarater and interrater reliability of TAD-root contact diagnoses were perfect for microCT diagnoses (κ = 1), generally moderate to good (κ >0.5) for CBCT diagnoses except for the use of color enhancement tools (κ <0.25). For diagnostic accuracy, there was generally a low agreement (κ <0.45) between CBCT and microCT (gold standard). The percent accuracy ranged from 68.1% to 79.2% and was not different among raters, bracket presence/absence, or software choices (chi-square tests, P >0.05). Overall, diagnostic sensitivity was above 80%, whereas specificity was below 55%. CONCLUSIONS: Despite good reliability, diagnoses of TAD-root contact using 400 µm voxel size CBCT imaging tend to be inaccurate, with a likelihood of high false-positive diagnoses.

Comparison of 2 Invisalign tray generations using the Peer Assessment Rating index.

INTRODUCTION: This study aimed to establish if there is a significant difference in effectiveness between 2 generations of Invisalign trays in terms of Peer Assessment Rating (PAR) score reduction for finished patients from a graduate orthodontic clinic. METHODS: Forty-five pretreatment and posttreatment patients treated with the previous Invisalign material and 49 pretreatment and posttreatment patients treated with SmartTrack material were scored using the Peer Assessment Rating (PAR) index. Both groups were controlled for initial weighted PAR score, age, gender, and treatment time. The 2 generations were compared in regard to absolute reduction, percent reduction, and great improvement in PAR score. RESULTS: The mean absolute reduction in weighted PAR score between the groups was not statistically significant (P = 0.526). The mean percent reduction in weighted PAR score between the groups was not statistically significant (P = 0.210). The proportion of great improvement between the groups was not significant (P = 0.526). Only 6 of the 8 components of occlusion had enough variation to be modeled. An absolute reduction in unweighted PAR score was not significantly different between the groups for maxillary anterior alignment, overjet, or mandibular anterior alignment (P = 0.996, 1.000, and 0.114, respectively). Percent reduction in unweighted PAR score was not significantly different between the 2 groups for an anteroposterior, overbite, or transverse (P = 1.000, 1.000, and 1.000, respectively) relationships. CONCLUSIONS: Our study indicates that both generations of Invisalign aligners improved the malocclusion to a similar degree according to the PAR index. Patient-centric benefits of SmartTrack aligner should also be considered by the provider.

Mechanical and clinical evaluation of the effect of microscrew on root proximity and cortical bone thickness.

BACKGROUND/OBJECTIVES: Primary stability is required for successful use of microscrew. This study investigated correlations among biomechanical, morphological, and clinical values in relationship to root contact and different placement locations. MATERIALS/METHODS: Thirty-three microscrews were placed between the molars (n = 18) or in the body of the mandible (n = 15) in three pigs. Insertion torque, Periotest, resonance frequency analysis (RFA), and static and dynamic stiffness were measured. Cone beam computed tomography was performed before and after the insertion of microscrews. Interproximal microscrews were divided into root contacted microscrews (n = 9) and non-root contact microscrews (n = 9). Factorial analysis of variance was conducted, with significance set at P < 0.05. RESULTS: A significant difference was observed between bodily and root contacted microscrews in Periotest, RFA, static and dynamic stiffness, Tanδ, and bone density (RFA, P = 0.045; all others, P < 0.001). A significant difference was observed between bodily and non-root contact microscrews in Periotest, RFA, and bone density (RFA, P = 0.025; all others, P < 0.001). A significant difference was observed in static (P = 0.01) and dynamic (P = 0.038) stiffness between microscrews with and without contact. Dynamic stiffness (P = 0.02) and Tanδ (P = 0.03) showed significant correlations with Periotest results only in bodily microscrews. LIMITATIONS: Since a pig bone was used, some differences in the quality and quantity of the bone might be observed between humans. CONCLUSIONS/IMPLICATIONS: Stiffness values distinguished between microscrews with and without contact. Periotest and RFA results indicated that bodily microscrews were more stable than interproximal microscrews. Periotest and RFA may be useful with large, microscrews and/or in thick cortical bone, but further investigation is required to determine the stability of interproximal microscrews.

Associations of pretreatment parameters with changes during orthodontic treatment.

OBJECTIVES: To examine whether pretreatment conditions of a patient can determine alveolar bone changes after orthodontic treatment. SETTING AND SAMPLE POPULATION: Cone beam computed tomography (CBCT) images were obtained from 44 patients (17 male and 27 female, 14.02 ± 1.29 years). MATERIAL AND METHODS: Buccal bone height (BBH), buccal bone thickness (BBT), and molar angulation (MA) of right and left maxillary molars and intermolar distance (ID) were measured using the CBCT images obtained before and after orthodontic treatment using conventional brackets and self-ligating conventional brackets. RESULTS: There was a significant change only in BBH after treatment. All posttreatment parameters had significant positive correlations with the corresponding pretreatment parameters (r2  = 0.376-0.719, P < 0.001). Most of the changes had significant negative correlations with the corresponding pretreatment parameter (r2  = 0.054-0.249, P < 0.03). The results were not significantly influenced by the different bracket types. CONCLUSION: The current findings suggest that the CBCT-based morphological information about dentition and oral bone conditions of patients can provide a better pretreatment plan to estimate the results of orthodontic treatment.

Improvement of Open Bite and Stomatognathic Function in an Axenfeld- Rieger Syndrome Patient by Orthodontic Sectional Arch Mechanics: Clinical Considerations and the Risk of Orthodontic Tooth Movement.

Orthodontists need to understand the orthodontic risks associated with systemic disorders. Axenfeld-Rieger syndrome (ARS) is a rare autosomal dominant disorder with genetic and morphological variability. The risks of orthodontic treatment in ARS patients have been unclear. Here we describe the correction of an anterior open bite in a 15-year-old Japanese female ARS patient by molar intrusion using sectional archwires with miniscrew implants. An undesirable development of external apical root resorption (EARR) was observed in all intrusive force-applied posterior teeth during the patient's orthodontic treatment, suggesting that ARS patients have a higher risk of EARR than the general population.

Comparison of digital intraoral scanners and alginate impressions: Time and patient satisfaction.

INTRODUCTION: Recent technological advances have made intraoral scans and digital models a possibility and a promising alternative to conventional alginate impressions. Several factors should be examined when considering an intraoral scanner, including patient acceptance and efficiency. The objectives of this study were to assess and compare patient satisfaction and time required between 2 intraoral scanners and conventional alginate impressions. METHODS: An initial pilot study was completed to create a valid and reliable survey instrument that would measure 3 areas of patient satisfaction with the impression experience. A visual analog scale survey was developed and administered to 180 orthodontic patients receiving 1 of 3 types of impressions: (1) iTero Element intraoral scan (Align Technologies, San Jose, Calif), n = 60; (2) TRIOS Color intraoral scan (3Shape, Copenhagen, Denmark), n = 60; and (3) conventional alginate impression (imprEssix Color Change; Dentsply Sirona, York, Pa), n = 60, and the time required to obtain the impressions was recorded. RESULTS: Reliability was evaluated with intraclass correlation coefficient values for 17 paired questionnaires, and all questions were found to be reliable (intraclass correlation coefficient, ≥0.65). For the main study, 180 subjects completed timed impressions and surveys. Data indicated that subjects receiving intraoral scans preferred the digital impressions, and subjects receiving alginate impressions were neutral regarding impression preference, and that efficiency varied based on the impression method. CONCLUSIONS: Intraoral scanners are accepted by orthodontic patients, and they have comparable efficiency with conventional impression methods depending on the type of scanner.

Evaluation of Invisalign treatment effectiveness and efficiency compared with conventional fixed appliances using the Peer Assessment Rating index.

INTRODUCTION: The purpose of this retrospective case-control study was to compare the treatment effectiveness and efficiency of the Invisalign system with conventional fixed appliances in treating orthodontic patients with mild to moderate malocclusion in a graduate orthodontic clinic. METHODS: Using the peer assessment rating (PAR) index, we evaluated pretreatment and posttreatment records of 48 Invisalign patients and 48 fixed appliances patients. The 2 groups of patients were controlled for general characteristics and initial severity of malocclusion. We analyzed treatment outcome, duration, and improvement between the Invisalign and fixed appliances groups. RESULTS: The average pretreatment PAR scores (United Kingdom weighting) were 20.81 for Invisalign and 22.79 for fixed appliances (P = 1.0000). Posttreatment weighted PAR scores between Invisalign and fixed appliances were not statistically different (P = 0.7420). On average, the Invisalign patients finished 5.7 months faster than did those with fixed appliances (P = 0.0040). The weighted PAR score reduction with treatment was not statistically different between the Invisalign and fixed appliances groups (P = 0.4573). All patients in both groups had more than a 30% reduction in the PAR scores. Logistic regression analysis indicated that the odds of achieving "great improvement" in the Invisalign group were 0.329 times the odds of achieving "great improvement" in the fixed appliances group after controlling for age (P = 0.0150). CONCLUSIONS: Our data showed that both Invisalign and fixed appliances were able to improve the malocclusion. Invisalign patients finished treatment faster than did those with fixed appliances. However, it appears that Invisalign may not be as effective as fixed appliances in achieving "great improvement" in a malocclusion. This study might help clinicians to determine appropriate patients for Invisalign treatment.

Evaluation of objective structured clinical examination for advanced orthodontic education 12 years after introduction.

INTRODUCTION: Advanced education programs in orthodontics must ensure student competency in clinical skills. An objective structure clinical examination has been used in 1 program for over a decade. The results were analyzed cross-sectionally and longitudinally to provide insights regarding the achievement of competency, student growth, question difficulty, question discrimination, and question predictive ability. METHODS: In this study, we analyzed 218 (82 first-year, 68 second-year, and 68 third-year classes) scores of each station from 85 orthodontic students. The grades originated from 13 stations and were collected anonymously for 12 consecutive years during the first 2 decades of the 2000s. The stations tested knowledge and skills regarding dental relationships, analyzing a cephalometric tracing, performing a diagnostic skill, identifying cephalometric points, bracket placement, placing first-order and second-order bends, forming a loop, placing accentuated third-order bends, identifying problems and planning mixed dentition treatment, identifying problems and planning adolescent dentition treatment, identifying problems and planning nongrowing skeletal treatment, superimposing cephalometric tracings, and interpreting cephalometric superimpositions. Results were evaluated using multivariate analysis of variance, chi-square tests, and latent growth analysis. RESULTS: The multivariate analysis of variance showed that all stations except 3 (analyzing a cephalometric tracing, forming a loop, and identifying cephalometric points) had significantly lower mean scores for the first-year student class than the second- and third-year classes (P <0.028); scores between the second- and third-year student classes were not significantly different (P >0.108). The chi-square analysis of the distribution of the number of noncompetent item responses decreased from the first to the second years (P <0.0003), from the second to the third years (P <0.0042), and from the first to the third years (P <0.00003). The latent growth analysis showed a wide range of difficulty and discrimination between questions. It also showed continuous growth for some areas and the ability of 6 questions to predict competency at greater than the 80% level. CONCLUSIONS: Objective structure clinical examinations can provide a method of evaluating student performance and curriculum impact over time, but cross-sectional and longitudinal analyses of the results may not be complementary. Significant learning appears to occur during all years of a 3-year program. Valuable questions were both easy and difficult, discriminating and not discriminating, and came from all domains: diagnostic, technical, and evaluation/synthesis.

Implant therapy for a patient with Down syndrome and oral habits: A clinical report.

This clinical report describes prosthodontic therapy with an implant-supported partial fixed dental prosthesis for a patient with Down syndrome and concomitant oral habits, including tongue thrusting and thumb sucking.

Effect of minocycline on induced glial activation by experimental tooth movement.

INTRODUCTION: Orthodontic tooth movement causes pain to a patient. Glial cells are nonneuronal cells in the central nervous system and are implicated in various types of pain. In this study, we assessed glial activation responses after experimental tooth movement using immunocytochemical detection of anti-CD11b (OX42) and glial fibrillary acidic protein immunoreactivity to illustrate the microglial and astrocytes response, respectively. In addition, the effect of minocycline in reducing pain during tooth movement was also investigated. METHODS: Fifty-five Sprague Dawley rats with and without administration of minocycline after 1, 3, 5, 7, and 14 days (n = 5, for each) of tooth movement were used. Immunohistochemistry for microglia (OX42) and astrocyte (glial fibrillary acidic protein) were performed at the medullary dorsal horn (trigeminal subnucleus caudalis). Three-dimensional quantitative analysis was performed with a confocal fluorescence microscope and a software program. RESULTS: There was a significant increase in the OX42 and glial fibrillary acidic protein immunoreactivity in response to tooth movement in the medullary dorsal horn. Furthermore, systematic administration of minocycline, a selective inhibitor of microglial activation, significantly attenuated the nociceptive c-Fos expression in the medullary dorsal horn that was induced by experimental tooth movement. CONCLUSIONS: These data indicate the possible importance of microglial activation in the development of orthodontic pain. This is also the first report on the systematic application of minocycline.