Unveiling Melanoma: A Deep Dive into Disparities at a Latin-American Cancer Institute.

INTRODUCTION: The worldwide incidence of melanoma has increased in the last 40 years. Our aim was to describe the clinic-pathological characteristics and outcomes of three cohorts of patients diagnosed with melanoma in a Latin-American cancer institute during the last 20 years. METHODS: We evaluated three retrospective patient cohorts diagnosed with melanoma at Instituto Nacional de Enfermedades Neoplasicas (INEN), a public hospital in Lima, Peru, for the years 2005-2006, 2010-2011, and 2017-2018. Survival rate differences were assessed using the Log-rank test. RESULTS: Overall, 584 patients were included (only trunk and extremities); 51% were male, the mean age was 61 (3-97) years, and 48% of patients resided in rural areas. The mean time to diagnosis was 22.6 months, and the mean Breslow thickness was 7.4 mm (T4). Lower extremity was the most common location (72%). A majority of the patients (55%) had metastases at the time of presentation, with 36% in stage III and 19% in stage IV. Cohorts were distributed as 2005-2006 (n = 171), 2010-2011 (n = 223), and 2017-2018 (n = 190). No immunotherapy was used. Cohort C exhibited the most significant increase in stage IV diagnoses (12.3%, 15.7%, 28.4%, respectively; p < 0.01). The median overall survival rates at the three-year follow-up demonstrated a decline over the years for stages II (97%, 98%, 57%, respectively; p < 0.05) and III (66%, 77%, 37%; p < 0.01). CONCLUSIONS: There has been a worsening in the incidence of late-stage metastatic melanoma in Peru throughout the years, coupled with a significant decline in overall survival rates. This is underscored by the fact that half of the population lives in regions devoid of oncological access.

The effect of the attitude towards risk/ambiguity on examination grades: cross-sectional study in a Portuguese medical school.

Given the high prevalence of multiple-choice examinations with formula scoring in medical training, several studies have tried to identify other factors in addition to the degree of knowledge of students which influence their response patterns. This study aims to measure the effect of students' attitude towards risk and ambiguity on their number of correct, wrong, and blank answers. In October 2018, 233 3rd year medical students from the Faculty of Medicine of the University of Porto, in Porto, Portugal, completed a questionnaire which assessed the student's attitudes towards risk and ambiguity, and aversion to ambiguity in medicine. Simple and multiple regression models and the respective regression coefficients were used to measure the association between the students' attitudes, and their answers in two examinations that they had taken in June 2018. Having an intermediate level of ambiguity aversion in medicine (as opposed to a very high or low level) was associated with a significant increase in the number of correct answers and decrease in the number of blank answers in the first examination. In the second examination, high levels of ambiguity aversion in medicine were associated with a decrease in the number of wrong answers. Attitude towards risk, tolerance for ambiguity, and gender did not show significant association with the number of correct, wrong, and blank answers for either examination. Students' ambiguity aversion in medicine is correlated with their performance in multiple-choice examinations with negative marking. Therefore, it is suggested the planning and implementation of counselling sessions with medical students regarding the possible impact of ambiguity aversion on their performance in multiple-choice questions with negative marking.

Development of clobetasol-loaded biodegradable nanoparticles as an endodontic intracanal medicament.

AIM: The aim of current study is the development and optimization of biodegradable polymeric nanoparticles (NPs) to be used in the field of Endodontics as intracanal medication in cases of avulsed teeth with extended extra-oral time, utilizing PLGA polymers loaded with the anti-inflammatory drug clobetasol propionate (CP). METHODOLOGY: CP-loaded nanoparticles (CP-NPs) were prepared using the solvent displacement method. CP release profile from CP-NPs was assessed for 48 h against free CP. Using extracted human teeth, the degree of infiltration inside the dentinal tubules was studied for both CP-NPs and CP. The anti-inflammatory capacity of CP-NPs was evaluated in vitro measuring their response and reaction against inflammatory cells, in particular against macrophages. The enzyme-linked immunosorbent assay (ELISA) was used to examine the cytokine release of IL-1ß and TNF-α. RESULTS: Optimized CP-NPs displayed an average size below 200 nm and a monomodal population. Additionally, spherical morphology and non-aggregation of CP-NPs were confirmed by transmission electron microscopy. Interaction studies showed that CP was encapsulated inside the NPs and no covalent bonds were formed. Moreover, CP-NPs exhibited a prolonged and steady release with only 21% of the encapsulated CP released after 48 h. Using confocal laser scanning microscopy, it was observed that CP-NPs were able to display enhanced penetration into the dentinal tubules. Neither the release of TNF-α nor IL-1ß increased in CP-NPs compared to the LPS control, displaying results similar and even less than the TCP after 48 h. Moreover, IL-1ß release in LPS-stimulated cells, decreased when macrophages were treated with CP-NPs. CONCLUSIONS: In the present work, CP-NPs were prepared, optimized and characterized displaying significant increase in the degree of infiltration inside the dentinal tubules against CP and were able to significantly reduce TNF-α release. Therefore, CP-NPs constitute a promising therapy for the treatment of avulsed teeth with extended extra-oral time.

Calcium hydroxide-loaded nanoparticles dispersed in thermosensitive gel as a novel intracanal medicament.

AIM: Design, produce and assess the viability of a novel nanotechnological antibacterial thermo-sensible intracanal medicament This involves encapsulating calcium hydroxide (Ca(OH)2) within polylactic-co-glycolic acid (PLGA) nanoparticles (NPs) and dispersing them in a thermosensitive gel (Ca(OH)2-NPs-gel). In addition, perform in vitro and ex vivo assessments to evaluate tissue irritation and penetration capacity into dentinal tubules in comparison to free Ca(OH)2. METHODOLOGY: Reproducibility of Ca(OH)2-NPs was confirmed by obtaining the average size of the NPs, their polydispersity index, zeta potential and entrapment efficiency. Moreover, rheological studies of Ca(OH)2-NPs-gel were carried out with a rheometer, studying the oscillatory stress sweep, the mean viscosity value, frequency and temperature sweeps. Tolerance was assessed using the membrane of an embryonated chicken egg. In vitro Ca(OH)2 release was studied by direct dialysis in an aqueous media monitoring the amount of Ca(OH)2 released. Six extracted human teeth were used to study the depth of penetration of fluorescently labelled Ca(OH)2-NPs-gel into the dentinal tubules and significant differences against free Ca(OH)2 were calculated using one-way anova. RESULTS: Ca(OH)2-NPs-gel demonstrated to be highly reproducible with an average size below 200 nm, a homogeneous NPs population, negative surface charge and high entrapment efficiency. The analysis of the thermosensitive gel allowed us to determine its rheological characteristics, showing that at 10°C gels owned a fluid-like behaviour meanwhile at 37°C they owned an elastic-like behaviour. Ca(OH)2-NPs-gel showed a prolonged drug release and the depth of penetration inside the dentinal tubules increased in the most apical areas. In addition, it was found that this drug did not produce irritation when applied to tissues such as eggs' chorialantoidonic membrane. CONCLUSION: Calcium hydroxide-loaded PLGA NPs dispersed in a thermosensitive gel may constitute a suitable alternative as an intracanal antibacterial medicament.

Definition of sensory and instrumental thresholds of acceptability for selection of cassava genotypes with improved boiling properties.

BACKGROUND: Consumers of boiled cassava in Africa, Latin America and Asia use specific preference criteria to evaluate its cooking quality, in terms of texture, colour and taste. To improve adoption rates of improved cassava varieties intended for consumption after boiling, these preference criteria need to be determined, quantified and integrated as post-harvest quality traits in the target product profile of boiled cassava, so that breeding programs may screen candidate varieties based on both agronomic traits and consumer preference traits. RESULTS: Surveys of various end-user groups identified seven priority quality attributes of boiled cassava covering root preparation, visual aspect, taste and texture. Three populations of contrasted cassava genotypes, from good-cooking to bad-cooking, in three countries (Uganda, Benin, Colombia) were then characterized according to these quality attributes by sensory quantitative descriptive analysis (QDA) and by standard instrumental methods. Consumers' preferences of the texture attributes mealiness and hardness were also determined. By analysis of correlations, the consumers' preferences scores were translated into thresholds of acceptability in terms of QDA scores, then in terms of instrumental measurements (water absorption during boiling and texture analysis). The thresholds of acceptability were used to identify among the Colombian and Benin populations promising genotypes for boiled cassava quality. CONCLUSION: This work demonstrates the steps of determining priority quality attributes for boiled cassava and establishing their corresponding quantitative thresholds of acceptability. The information can then be included in boiled cassava target product profiles used by cassava breeders, for better selection and adoption rates of new varieties. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Pentraxin 3 Inhibits Complement-driven Macrophage Activation to Restrain Granuloma Formation in Sarcoidosis.

Rationale: Sarcoidosis is a multisystemic inflammatory disease characterized by the formation of granulomas in response to persistent stimuli. The long pentraxin PTX3 (pentraxin 3) has emerged as a component of humoral innate immunity with essential functions in the resolution of inflammation, but its role during granuloma formation is unknown. Objectives: To evaluate PTX3 as a modulator of pathogenic signals involved in granuloma formation and inflammation in sarcoidosis. Methods: Peripheral blood mononuclear cells obtained from patients with sarcoidosis harboring loss-of-function genetic variants and gene-deleted mice were used to assess the role of PTX3 in experimental models of granuloma formation in vitro and in vivo. The identified mechanisms of granulomatous inflammation were further evaluated in tissue and BAL samples and correlated with the disease course. Measurements and Main Results: We have identified a molecular link between PTX3 deficiency and the pathogenic amplification of complement activation to promote granuloma formation. Mechanistically, PTX3 deficiency licensed the complement component C5a-mediated activation of the metabolic checkpoint kinase mTORC1 (mammalian target of rapamycin complex 1) and the reprogramming of macrophages toward increased glycolysis to foster their proliferation and aggregation. This process sustained the further recruitment of granuloma-promoting immune cells and the associated proinflammatory microenvironment and influenced the clinical course of the disease. Conclusions: Our results identify PTX3 as a pivotal molecule that regulates complement-mediated signaling cues in macrophages to restrain granulomatous inflammation and highlight the therapeutic potential of this signaling axis in targeting granuloma formation in sarcoidosis.

Hyperspectral imaging for the determination of relevant cooking quality traits of boiled cassava.

BACKGROUND: The purpose of this study was to investigate the potential of hyperspectral imaging for the characterization of cooking quality parameters, dry matter content (DMC), water absorption (WAB), and texture in cassava genotypes contrasting for their cooking quality. RESULTS: Hyperspectral images were acquired on cooked and fresh intact longitudinal and transversal slices from 31 cassava genotypes harvested in March 2022 in Colombia. Different chemometric methods were tested for the quantification of DMC, WAB, and texture parameters. Data analysis was conducted through partial least squares regression, K nearest neighbors regression, support vector machine regression and CovSel multiple linear regression (CovSel_MLR). Efficient performances were obtained for DMC using CovSel_MLR with, coefficient of multiple determination R p 2 = 0.94 $$ {R}_p^2=0.94 $$ , root-mean-square error of prediction RMSEP = 0.96 g/100 g, and ratio of the standard deviation values RPD = 3.60. High heterogeneity was observed between contrasting genotypes. The predicted distribution of DMC within the root can be homogeneous or heterogeneous depending on the genotype. Weak predictions were obtained for WAB and texture parameters. CONCLUSIONS: This study showed that hyperspectral imaging could be used as a high-throughput phenotyping tool for the visualization of DMC in contrasting cooking quality genotypes. Further improvement of protocols and larger datasets are required for WAB and texture quality traits. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Contrasting effects of polysaccharide components on the cooking properties of roots, tubers and bananas.

BACKGROUND: Consumer preferences for boiled or fried pieces of roots, tubers and bananas (RTBs) are mainly related to their texture. Different raw and cooked RTBs were physiochemically characterized to determine the effect of biochemical components on their cooking properties. RESULTS: Firmness in boiled sweetpotato increases with sugar and amylose contents but no significant correlation was observed between other physicochemical characteristics and cooking behaviour. Hardness of boiled yam can be predicted by dry matter (DM) and galacturonic acid (GalA) levels. For cassava, no significant correlation was found between textural properties of boiled roots and DM, but amylose and Ca2+ content were correlated with firmness, negatively and positively, respectively. Water absorption of cassava root pieces boiled in calcium chloride solutions was much lower, providing indirect evidence that pectins are involved in determining cooking quality. A highly positive correlation between textural attributes and DM was observed for fried plantain, but no significant correlation was found with GalA, although frying slightly reduced GalA. CONCLUSION: The effect of main components on texture after cooking differs for the various RTBs. The effect of global DM and major components (i.e. starch, amylose) is prominent for yam, plantain and sweetpotato. Pectins also play an important role on the texture of boiled yam and play a prominent role for cassava through interaction with Ca2+ . © 2023 Bill and Melinda Gates Foundation. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Review of instrumental texture measurements as phenotypic tool to assess textural diversity of root, tuber and banana food products.

Roots, tubers and bananas (RTBs) contribute immensely to food security and livelihoods in sub-Saharan Africa, Asia and Latin America. The adoption of RTB genotypes in these regions relies on the interplay among agronomic traits, ease of processing and consumer preference. In breeding RTBs, until recently little attention was accorded key textural traits preferred by consumers. Moreover, a lack of standard, discriminant, repeatable protocols that can be used to measure the textural traits deter linkages between breeding better RTB genotypes and end user/consumer preferences. RTB products texture - that is, behaviour of RTB food products under unique deformations, such as disintegration and the flow of a food under force - is a critical component of these preferences. The preferences consumers have for certain product texture can be evaluated from expert sensory panel and consumer surveys, which are useful tools in setting thresholds for textural traits, and inform breeders on what to improve in the quality of RTBs. Textural characterization of RTBs under standard operating procedures (SOPs) is important in ensuring the standardization of texture measurement conditions, predictability of textural quality of RTBs, and ultimately definition of RTB food product profiles. This paper reviews current SOPs for the textural characterization of RTBs, including their various associated methods, parameters, challenges and merits. Case studies of texture characterized during development of SOPs and evaluation of texture of RTB populations are discussed, together with insights into key textural attributes and correlations between instrumental, sensory and consumer assessment of texture unique to various RTB food products. Hardness was considered a universal key textural attribute to discriminate RTBs. The review should provide adequate insight into texture of RTB food products and critical factors in their measurement. It aims to promote inclusion of texture in breeding pipelines by investigating which textural traits are prioritized by consumers, particularly since the inclusion of textural traits has recently gained prominence by breeders in improving RTBs. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Physical exercise, immune response, and susceptibility to infections-current knowledge and growing research areas.

This review presents state-of-the-art knowledge and identifies knowledge gaps for future research in the area of exercise-associated modifications of infection susceptibility. Regular moderate-intensity exercise is believed to have beneficial effects on immune health through lowering inflammation intensity and reducing susceptibility to respiratory infections. However, strenuous exercise, as performed by professional athletes, may promote infection: in about half of athletes presenting respiratory symptoms, no causative pathogen can be identified. Acute bouts of exercise enhance the release of pro-inflammatory mediators, which may induce infection-like respiratory symptoms. Relatively few studies have assessed the influence of regularly repeated exercise on the immune response and systemic inflammation compared to the effects of acute exercise. Additionally, ambient and environmental conditions may modify the systemic inflammatory response and infection susceptibility, particularly in outdoor athletes. Both acute and chronic regular exercise influence humoral and cellular immune response mechanisms, resulting in decreased specific and non-specific response in competitive athletes. The most promising areas of further research in exercise immunology include detailed immunological characterization of infection-prone and infection-resistant athletes, examining the efficacy of nutritional and pharmaceutical interventions as countermeasures to infection symptoms, and determining the influence of various exercise loads on susceptibility to infections with respiratory viruses, including SARS-CoV-2. By establishing a uniform definition of an "elite athlete," it will be possible to make a comparable and straightforward interpretation of data from different studies and settings.

Phylogeography and ecological differentiation of strictly Mediterranean taxa: the case of the Iberian endemic Odontites recordonii.

PREMISE: Ecological drivers for genetic differentiation in Mediterranean climates are still underexplored. We have used the strictly Mediterranean endemic Odontites recordonii as a model species to address this question. This species is one of the three Iberian representatives of the O. vernus group, which are morphologically similar. Thus, it was additionally necessary to clarify their phylogenetic relationships. METHODS: We used amplified fragment length polymorphisms to reveal phylogenetic relationships within O. vernus group, and to reconstruct the phylogeographic patterns within O. recordonii. Additionally, ecological niche models were generated to detect refugia along the Quaternary climatic oscillations. And finally, alleles under natural selection were identified, and correlations between allele presences and environmental variables were calculated in order to shed light on the ecological drivers promoting differentiation. RESULTS: The three species from the O. vernus group were recovered as distinct species. Three genetic groups were found within O. recordonii and a putative refugium was detected for each one. Eighty-one alleles could be under diversifying selection, and 58 alleles showed significant correlations with environmental variables, especially with temperature and precipitation seasonality and summer drought. CONCLUSIONS: The three Iberian species of the O. vernus group are reciprocal monophyletic taxa. The three genetic groups of O. recordonii could have been restricted to narrow refugia during the Quaternary and displayed present distributions in accordance with bioclimatic conditions. Temperature and precipitation seasonality and the intensity of summer drought are definitory climatic parameters of Mediterranean-type climates, and they could have acted as drivers of genetic differentiation on O. recordonii.

Characterization System for Heat-Energy to Electric-Energy Conversion from Concrete by Means of a Thermoelectric Module.

The present work describes the implementation of a prototype to characterize thermoelectric modules (TEM). The goal is to study the energy conversion by means of thermoelectric modules mounted on concrete structures. The proposed experimental system is used for the electrical characterization of a commercially available thermoelectric module TEC1-12710 to prove its operation while embedded in a concrete slab, typical of building constructions. In this case, the parameters that define thermal energy conversion into electrical energy are open-circuit voltage generation, loaded circuit voltage generation, and load current. A known external load is connected to the terminals of the TEM for the purpose of its electric characterization. An electrical heating element on the hot side and a thermoelectric cooler on the cold side produce a temperature difference on the concrete slab. This arrangement allows the emulation of a temperature gradient produced by sunlight over a concrete structure. The objective is to measure the resulting electrical energy produced by the combination of concrete slab and the thermoelectric module. By controlling the temperature difference between the sides of the thermoelectric module under test, it is possible to simulate the effect of the temperature gradient under different sunlight conditions. Two digital PI controllers regulate the temperature conditions, thus providing controlled conditions for the experiments.

Accuracy of penicillin allergy diagnostic tests: A systematic review and meta-analysis.

BACKGROUND: Having a penicillin allergy label associates with a higher risk for antibiotic resistance and increased health care use. OBJECTIVE: We sought to assess the accuracy of skin tests and specific IgE quantification in the diagnostic evaluation of patients reporting a penicillin/ß-lactam allergy. METHODS: We performed a systematic review and diagnostic accuracy meta-analysis, searching on MEDLINE, Scopus, and Web of Science. We included studies conducted in patients reporting a penicillin allergy and in whom skin tests and/or specific IgE quantification were performed and compared with drug challenge results. We quantitatively assessed the accuracy of diagnostic tests with bivariate random-effects meta-analyses. Meta-regression and subgroup analyses were performed to explore causes of heterogeneity. Studies' quality was evaluated using QUADAS-2 criteria. RESULTS: We included 105 primary studies, assessing 31,761 participants. Twenty-seven studies were assessed by bivariate meta-analysis. Skin tests had a summary sensitivity of 30.7% (95% CI, 18.9%-45.9%) and a specificity of 96.8% (95% CI, 94.2%-98.3%), with a partial area under the summary receiver-operating characteristic curve of 0.686 (I2 = 38.2%). Similar results were observed for subanalyses restricted to patients reporting nonimmediate maculopapular exanthema or urticaria/angioedema. Specific IgE had a summary sensitivity of 19.3% (95% CI, 12.0%-29.4%) and a specificity of 97.4% (95% CI, 95.2%-98.6%), with a partial area under the summary receiver-operating characteristic curve of 0.420 (I2 = 8.5%). Projected predictive values mainly reflect the low frequency of true penicillin allergy. CONCLUSIONS: Skin tests and specific IgE quantification appear to have low sensitivity and high specificity. Because current evidence is insufficient for assessing the role of these tests in stratifying patients for delabeling, we identified key requirements needed for future studies.

Biofabrication of Collagen Tissue-Engineered Blood Vessels with Direct Co-Axial Extrusion.

Cardiovascular diseases are considered one of the worldwide causes of death, with atherosclerosis being the most predominant. Nowadays, the gold standard treatment is blood vessel replacement by bypass surgery; however, autologous source is not always possible. Thereby, tissue-engineered blood vessels (TEBVs) are emerging as a potential alternative source. In terms of composition, collagen has been selected in many occasions to develop TEBVs as it is one of the main extracellular matrix components of arteries. However, it requires specific support or additional processing to maintain the tubular structure and appropriate mechanical properties. Here, we present a method to develop support-free collagen TEBVs with co-axial extrusion in a one-step procedure with high concentrated collagen. The highest concentration of collagen of 20 mg/mL presented a burst pressure of 619.55 ± 48.77 mmHg, being able to withstand perfusion of 10 dynes/cm2. Viability results showed a high percentage of viability (86.1 and 85.8% with 10 and 20 mg/mL, respectively) of human aortic smooth muscle cells (HASMCs) and human umbilical vein endothelial cells (HUVEC) after 24 h extrusion. Additionally, HUVEC and HASMCs were mainly localized in their respective layers, mimicking the native distribution. All in all, this approach allows the direct extrusion of collagen TEBVs in a one-step procedure with enough mechanical properties to be perfused.

In vitro assessment of PEEK and titanium implant abutments: Screw loosening and microleakage evaluations under dynamic mechanical testing.

STATEMENT OF PROBLEM: Polyetheretherketone (PEEK) has been advocated to replace metal components in dentistry. Although PEEK is a high-performance polymer with a white color, adequate biological response, and resistance to fracture, data to support PEEK as an alternative material for implant abutments are lacking. PURPOSE: The purpose of this in vitro study was to assess the mechanical and functional properties of PEEK implant abutments as a nonmetallic alternative to titanium abutments, which presents esthetic limitations and greater difficulty to customize clinically. MATERIAL AND METHODS: Implant abutments manufactured by using PEEK (n=24) or titanium grade 5 (n=24) were attached to MIS Implants type M4 3.75×16 mm with an internal screw tightened to 25 Ncm. Screw loosening and microleakage was assessed by submersion in a 2% methylene blue solution for 48 hours at 37 °C. Both groups were compared with and without applying dynamic loading; fatigue testing was performed following the International Organization for Standardization (ISO) 14801:2016 standard. All specimens were observed under a stereomicroscope at ×8 magnification. Statistically significant differences among the PEEK and titanium implant abutments were tested with 2-factor ANOVA and the chi-square analysis for nonpaired and paired data, respectively (α=.05). RESULTS: The implant abutments made of titanium were better in all mechanical tests. The torque loss of titanium abutments was approximately 10%, while PEEK showed a significantly higher (P<.05) torque loss of up to 50%. Moreover, 91.6% of the titanium abutments did not present microleakage, while there was no specimen of PEEK abutments without microleakage, once subjected to dynamic loading (P<.05). CONCLUSIONS: Titanium implant abutments (Ti6Al4V) were better in all tests performed. However, PEEK abutments may be suitable for long-term interim restorations, especially in the anterior area, in patients without parafunction.

Penicillin Allergy Testing Is Cost-Saving: An Economic Evaluation Study.

BACKGROUND: Having a penicillin allergy label is associated with the use of less appropriate and more expensive antibiotics and increased healthcare utilization. Penicillin allergy testing results in delabeling most allergy claimants and may be cost-saving. This study aimed to project whether penicillin allergy testing in patients reporting a penicillin allergy is cost-saving. METHODS: In this economic evaluation study, we built decision models to project the economic impact of 2 strategies for a patient with a penicillin allergy label: (1) perform diagnostic testing (drug challenges, with or without skin tests); and (2) do not perform diagnostic testing. The health service perspective was adopted, considering costs with penicillin allergy tests, and with hospital bed-days/outpatient visits, antibiotic use, and diagnostic testing. Twenty-four base case decision models were built, accounting for differences in the diagnostic workup, setting (inpatient vs outpatient) and geographic region. Uncertainty was explored via probabilistic sensitivity analyses. RESULTS: Penicillin allergy testing was cost-saving in all decision models built. For models assessing the performance of both skin tests and drug challenges, allergy testing resulted in average savings (in United States [US] dollars) of $657 for inpatients (US: $1444; Europe: $489) and $2746 for outpatients (US: $256; Europe: $6045). 75% of simulations obtained through probabilistic sensitivity analysis identified testing as the less costly option. CONCLUSIONS: Penicillin allergy testing was projected to be cost-saving across different scenarios. These results are devised to inform guidelines, supporting the adoption of policies promoting widespread testing of patients with a penicillin allergy label.

Criterion validity of ultrasound in the identification of calcium pyrophosphate crystal deposits at the knee: an OMERACT ultrasound study.

OBJECTIVE: To evaluate the discriminatory ability of ultrasound in calcium pyrophosphate deposition disease (CPPD), using microscopic analysis of menisci and knee hyaline cartilage (HC) as reference standard. METHODS: Consecutive patients scheduled for knee replacement surgery, due to osteoarthritis (OA), were enrolled. Each patient underwent ultrasound examination of the menisci and HC of the knee, scoring each site for presence/absence of CPPD. Ultrasound signs of inflammation (effusion, synovial proliferation and power Doppler) were assessed semiquantitatively (0-3). The menisci and condyles, retrieved during surgery, were examined microscopically by optical light microscopy and by compensated polarised microscopy. CPPs were scored as present/absent in six different samples from the surface and from the internal part of menisci and cartilage. Ultrasound and microscopic analysis were performed by different operators, blinded to each other's findings. RESULTS: 11 researchers from seven countries participated in the study. Of 101 enrolled patients, 68 were included in the analysis. In 38 patients, the surgical specimens were insufficient. The overall diagnostic accuracy of ultrasound for CPPD was of 75%-sensitivity of 91% (range 71%-87% in single sites) and specificity of 59% (range 68%-92%). The best sensitivity and specificity were obtained by assessing in combination by ultrasound the medial meniscus and the medial condyle HC (88% and 76%, respectively). No differences were found between patients with and without CPPD regarding ultrasound signs of inflammation. CONCLUSION: Ultrasound demonstrated to be an accurate tool for discriminating CPPD. No differences were found between patents with OA alone and CPPD plus OA regarding inflammation.

Health effects of exposure to chlorination by-products in swimming pools.

Concerns have been raised regarding the potential negative effects on human health of water disinfectants used in swimming pools. Among the disinfection options, the approaches using chlorine-based products have been typically preferred. Chlorine readily reacts with natural organic matter that are introduced in the water mainly through the bathers, leading to the formation of potentially harmful chlorination by-products (CBPs). The formation of CBPs is of particular concern since some have been epidemiologically associated with the development of various clinical manifestations. The higher the concentration of volatile CBPs in the water, the higher their concentration in the air above the pool, and different routes of exposure to chemicals in swimming pools (water ingestion, skin absorption, and inhalation) contribute to the individual exposome. Some CBPs may affect the respiratory and skin health of those who stay indoor for long periods, such as swimming instructors, pool staff, and competitive swimmers. Whether those who use chlorinated pools as customers, particularly children, may also be affected has been a matter of debate. In this article, we discuss the current evidence regarding the health effects of both acute and chronic exposures in different populations (work-related exposures, intensive sports, and recreational attendance) and identify the main recommendations and unmet needs for research in this area.

Heterogeneity of pollen food allergy syndrome in seven Southern European countries: The @IT.2020 multicenter study.

BACKGROUND: Pollen food allergy syndrome (PFAS) is a frequently underdiagnosed disease due to diverse triggers, clinical presentations, and test results. This is especially relevant in geographic areas with a broad spectrum of pollen sensitization, such as Southern Europe. OBJECTIVES: To elucidate similarities and differences of PFAS in nine Southern European centers and identify associated characteristics and unique markers of PFAS. METHODS: As part of the @IT.2020 Multicenter Study, 815 patients with seasonal allergic rhinitis (SAR), aged 10-60 years, were recruited in seven countries. They completed questionnaires regarding SAR, comorbidities, family history, and PFAS, and underwent skin prick testing (SPT) and serum IgE testing. RESULTS: Of the 815 patients, 167 (20.5%) reported PFAS reactions. Most commonly, eliciting foods were kiwi (58, 34.7%), peach (43, 25.7%), and melon (26, 15.6%). Reported reactions were mostly local (216/319, 67.7%), occurring within 5 min of contact with elicitors (209/319, 65.5%). Associated characteristics included positive IgE to at least one panallergen (profilin, PR-10, or nsLTP) (p = 0.007), maternal PFAS (OR: 3.716, p = 0.026), and asthma (OR: 1.752, p = 0.073). Between centers, heterogeneity in prevalence (Marseille: 7.5% vs. Rome: 41.4%, p < 0.001) and of clinical characteristics was apparent. Cypress played a limited role, with only 1/22 SPT mono-sensitized patients reporting a food reaction (p < 0.073). CONCLUSIONS: PFAS is a frequent comorbidity in Southern European SAR patients. Significant heterogeneity of clinical characteristics in PFAS patients among the centers was observed and may be related to the different pollen sensitization patterns in each geographic area. IgE to panallergen(s), maternal PFAS, and asthma could be PFAS-associated characteristics.

Exhaled breath condensate pH determinants in school-aged children: A population-based study.

BACKGROUND: Exhaled breath condensate (EBC) pH is a promising biomarker of airway inflammation. Lack of method standardization and interstudy variability precludes its use in clinical practice. While endogenous determinants have been described, underlying mechanisms for variability are mostly unknown. Thus, we aimed to assess the association between asthma and EBC pH in children, while studying potential environmental factors for interstudy variability. METHODS: A cross-sectional analysis of exhaled breath condensates from 613 children, aged 7-12 years, was conducted. Assessments included lung function and airway reversibility, exhaled nitric oxide, allergic sensitization, and body mass index (BMI). Indoor air quality (IAQ) was assessed in children's classrooms during 5 school days. Post-deaeration EBC pH showed a bimodal distribution, and the sample was split into acidic and alkaline groups. Regression models were constructed to assess the effects of asthma and asthma adjusted to IAQ parameters on EBC pH. RESULTS: Following adjustment to gender and BMI, asthma was significantly associated with a lower EBC pH in the acidic group. The effect of asthma on EBC pH was independent of IAQ, in both groups. In the acidic group, EBC pH was significantly affected by temperature [ß = -0.09 (-0.15, -0.02)] and PM 2.5 concentration [ß = -0.16 (-0.32, -0.01)], and in the alkaline group by relative humidity [ß = 0.07 (0.02, 0.13)] and concentration of endotoxins [ß = -0.06 (-0.1, -0.01)]. CONCLUSION: Our study shows that in addition to individual determinants such as asthma, environmental factors may influence and should be taken into consideration when interpreting EBC pH level in children.