Preparation of High-Performance Mn-Doped SnTe Materials at High Pressure and High Temperature.

SnTe is an environmentally friendly medium-temperature thermoelectric material, but its inherent low power factor (PF) and high lattice thermal conductivity severely limit its application. In this study, based on the fact that Mn doping can induce band convergence, the high-pressure and high-temperature (HPHT) synthesis method was used to optimize the sample preparation and shorten the synthesis cycle to 30 min. The results show that the Sn0.93Mn0.10Te sample achieves the maximum PF value of 34.00 µW cm-1 K-2 at 775 K and PFave value of 21.36 µW cm-1 K-2 between 300-875 K. Microstructure analysis shows that the high-pressure synthesis method introduces abundant grain boundaries, various grain sizes, multiple defects, and pore structures into the sample. These microscopic crystal structures can effectively scatter phonons and lower the lattice thermal conductivity. The modification of these micromorphologies results in the Sn0.92Mn0.11Te sample attaining a minimum lattice thermal conductivity of 0.45 W m-1 K-1 at 625 K. The thermoelectric figure of merit (zT) of sample Sn0.92Mn0.11Te reaches a maximum value of 1.1 at 775 K, and the zTave reaches 0.63 in the range of 300-875 K. This study indicates that the synergistic effect of Mn element doping and microstructure modification can effectively optimize the thermoelectric transport performance of SnTe materials.

Effects of cadmium on the intestinal health of the snail Bradybaena ravida Benson.

The heavy metal cadmium (Cd) is a toxic and bioaccumulative metal that can be enriched in the tissues and organs of living organisms through the digestive tract. However, more research is needed to determine whether food-sourced Cd affects the homeostasis of host gut microflora. In this study, the snail Bradybaena ravida (Benson) was used as a model organism fed with mulberry leaves spiked with different concentrations of Cd (0, 0.052, 0.71, and 1.94 mg kg-1). By combining 16S rRNA high-throughput sequencing with biochemical characterization, it was found that there were increases in the overall microbial diversity and abundances of pathogenic bacteria such as Corynebacterium, Enterococcus, Aeromonas, and Rickettsia in the gut of B. ravida after exposure to Cd. However, the abundances of potential Cd-resistant microbes in the host's gut, including Sphingobacterium, Lactococcus, and Chryseobacterium, decreased with increasing Cd concentrations in the mulberry leaves. In addition, there was a significant reduction in activities of energy, nutrient metabolism, and antioxidant enzymes for gut microbiota of snails treated with high concentrations of Cd compared to those with low ones. These findings highlight the interaction of snail gut microbiota with Cd exposure, indicating the potential role of terrestrial animal gut microbiota in environmental monitoring through rapid recognition and response to environmental pollution.

Superior Carrier Mobility Enabled by the Charge Channel Leads to Enhanced Thermoelectric Performance in BiCuSeO Composites.

BiCuSeO oxyselenides possess a highlighted thermoelectric performance among oxides, which originates from their intrinsically low thermal conductivity. However, intrinsic factors causing low thermal transport are also detrimental to carrier transport, leading to ultralow carrier mobility and relatively low electrical transport properties. Here, high-conductivity single-wall carbon nanotubes (SWCNTs) are adopted as the charge channels to be embedded in a BiCuSeO-based matrix, providing a transport pathway for charge carriers. The results show that carrier mobility is increased to 188 cm2 V-1 s-1 due to the SWCNTs composited, triggering an enhancement in electrical transport properties. Besides, the SWCNTs embedded in the matrix introduce abundant interfaces, suppressing phonon transport and depressing lattice thermal conductivity. With these achievements, a maximum zT of 0.84 at 818 K is realized in the composite with 0.1 wt% SWCNTs. The mechanical property of the composites is strengthened as well because of the SWCNTs. The work indicates that the SWCNTs, as the charge channels, propose an effective approach for enhancing carrier mobility in BiCuSeO-based materials, finally optimizing the thermoelectric performance as well as the mechanical property.

Repurposing rabeprazole sodium as an anti-Clostridium perfringens drug by inhibiting perfringolysin O.

AIMS: Clostridium perfringens infections affect food safety, human health, and the development of the poultry feed industry. Anti-virulence is an alternative strategy to develop new drug. Perfringolysin O (PFO) is an exotoxin of C. perfringens that has been demonstrated to play critical roles in the pathogenesis of this organism, promising it an attractive target to explore drugs to combat C. perfringens infection. METHODS AND RESULTS: Based on an activity-based screening, we identified six PFO inhibitors from the Food and Drug Administration (FDA)-approved drug library, among which rabeprazole sodium (RS) showed an optimal inhibitory effect with an IC50 of 1.82 ± 0.746 µg ml-1. The GLY57, ASP58, SER190, SER193-194, ASN199, GLU204, ASN377, THR379, and ALA200 in PFO interacted with RS during binding based on an energy analysis and H-bond analysis. This interaction blocked the oligomer formation of PFO, thereby inhibiting its cytotoxicity. RS treatment significantly increased the survival rate and alleviated pathological damage in C. perfringens or PFO-treated Galleria mellonella. CONCLUSIONS: RS could potentially be used as a candidate drug for treating C. perfringens infection.

[Main Infection Control Measures for Respiratory Infectious Diseases in Medical Institutions and Public Places in China].

Respiratory infectious diseases (RID) are the major public health problems threatening the people's lives and health.Infection control (IC) is one of the effective tools to contain the occurrence and spread of RID.We collected the articles and data on IC published since January 1,2018 and summarized the achievements,problems,and challenges of IC from administrative control,management control,environment and engineering control,and personal protection in the medical institutions and public places in China.The efforts for IC vary in different regions and medical institutions of different levels.There are still links to be improved for IC from administrative control,management control,environment and engineering control,and personal protection,especially in community-level medical institutions and public areas.It is urgent to strengthen the implementation of IC policies and conduct IC precisely according to local situations.We proposed the following suggestions.First,the existing IC products and tools should be applied to precisely implement the IC measures;second,modern high technology should be employed to develop efficient and convenient IC products and tools;finally,a digital or intelligent IC platform should be built for monitoring infections,so as to contain the occurrence and spread of RID.

An Ultrasmall Fe3 O4 -Decorated Polydopamine Hybrid Nanozyme Enables Continuous Conversion of Oxygen into Toxic Hydroxyl Radical via GSH-Depleted Cascade Redox Reactions for Intensive Wound Disinfection.

Nanozyme-based chemodynamic therapy (CDT) for fighting bacterial infections faces several major obstacles including low hydrogen peroxide (H2 O2 ) level, over-expressed glutathione (GSH) in infected sites, and inevitable damage to healthy tissue with abundant nonlocalized nanozymes. Herein, a smart ultrasmall Fe3 O4 -decorated polydopamine (PDA/Fe3 O4 ) hybrid nanozyme is demonstrated that continuously converts oxygen into highly toxic hydroxyl radical (•OH) via GSH-depleted cascade redox reactions for CDT-mediated bacterial elimination and intensive wound disinfection. In this system, photonic hyperthermia of PDA/Fe3 O4 nanozymes can not only directly damage bacteria, but also improve the horseradish peroxidase-like activity of Fe3 O4 decorated for CDT. Surprisingly, through photothermal-enhanced cascade catalytic reactions, PDA/Fe3 O4 nanozymes can consume endogenous GSH for disrupting cellular redox homeostasis and simultaneously provide abundant H2 O2 for improving •OH generation, ultimately enhancing the antibacterial performance of CDT. Such PDA/Fe3 O4 can bind with bacterial cells, and reveals excellent antibacterial property against both Staphylococcus aureus and Escherichia coli. Most interestingly, PDA/Fe3 O4 nanozymes can be strongly retained in infected sites by an external magnet for localized long-term in vivo CDT and show minimal toxicity to healthy tissues and organs. This work presents an effective strategy to magnetically retain the therapeutic nanozymes in infected sites for highly efficient CDT with good biosafety.

Ultra-thin silica shell-guarded nanoflares for high-fidelity live cell miRNA-21 imaging by fully avoiding the interference of biothiols.

We successfully constructed a new class of nanoflares based on ultra-thin silica-coated gold nanoparticles (Au@SiO2) with the covalent binding of nucleic acids, which demonstrated more resistance to biothiols than that exhibited in the traditional Au-S binding strategy, for imaging the target miRNA-21 with high fidelity in living cells.

Synthesis Optimization and Thermoelectric Properties of S-Filled and Te-Se Double-Substituted Skutterudite under High Pressure.

In recent years, skutterudite filled with electronegative elements (S, Se, Cl, Br) has attracted the extensive attention of researchers. By doping electron donors (Pb, Ni, or Te, S, Se) at the Co or Sb sites, the electronegative elements can form thermodynamically stable compounds in the intrinsic pores of the skutterudite, substantially expanding the research scope of skutterudite. In this study, S0.05Co4Sb11.3Te0.6Se0.1 skutterudite was synthesized at high pressure and high temperature, with a pressure range of 2.0-3.5 GPa. The phase composition, micro-morphology, and electrical and thermal transport properties were systematically characterized. The micromorphology analysis shows that the introduction of S element and substituting Te and Se at the Sb sites inhibit the grain growth in a suitable high-pressure environment. Substantial differences are observed in the directions of the lattice stripes in the samples, and rich grain boundaries and many lattice distortions and dislocation defects occur. The carrier concentration can be optimized by filling the voids of the skutterudite with a few S atoms, and the thermoelectric properties can be optimized by scattering phonons through resonance scattering and defect scattering. The samples synthesized at a pressure of 3.0 GPa and a temperature of 900 K have a maximum power factor of 23.85 × 10-4 W m-1 K-2 and a maximum zT value of 1.30 at a test temperature of 773 K.

COVIDX-LwNet: A Lightweight Network Ensemble Model for the Detection of COVID-19 Based on Chest X-ray Images.

Recently, the COVID-19 pandemic coronavirus has put a lot of pressure on health systems around the world. One of the most common ways to detect COVID-19 is to use chest X-ray images, which have the advantage of being cheap and fast. However, in the early days of the COVID-19 outbreak, most studies applied pretrained convolutional neural network (CNN) models, and the features produced by the last convolutional layer were directly passed into the classification head. In this study, the proposed ensemble model consists of three lightweight networks, Xception, MobileNetV2 and NasNetMobile as three original feature extractors, and then three base classifiers are obtained by adding the coordinated attention module, LSTM and a new classification head to the original feature extractors. The classification results from the three base classifiers are then fused by a confidence fusion method. Three publicly available chest X-ray datasets for COVID-19 testing were considered, with ternary (COVID-19, normal and other pneumonia) and quaternary (COVID-19, normal) analyses performed on the first two datasets, bacterial pneumonia and viral pneumonia classification, and achieved high accuracy rates of 95.56% and 91.20%, respectively. The third dataset was used to compare the performance of the model compared to other models and the generalization ability on different datasets. We performed a thorough ablation study on the first dataset to understand the impact of each proposed component. Finally, we also performed visualizations. These saliency maps not only explain key prediction decisions of the model, but also help radiologists locate areas of infection. Through extensive experiments, it was finally found that the results obtained by the proposed method are comparable to the state-of-the-art methods.

METTL14 promotes glomerular endothelial cell injury and diabetic nephropathy via m6A modification of α-klotho.

BACKGROUND: N6-Methyladenosine (m6A) modification has been implicated in many bioprocesses. However, its functions in diabetic nephropathy (DN) have not been determined. Here, we investigated the role of METTL14, a key component of the m6A methyltransferase complex, in DN. METHODS: The expression of METTL14 was detected in DN patients and human renal glomerular endothelial cells (HRGECs). In vitro and in vivo experiments were performed to explore the functions of METTL14 on high glocse-induced HRGECs and renal injury of DN mice. We also investigated whether METTL14 works by regulating α-klotho expression through m6A modification. RESULTS: METTL14 were highly expressed in kidneys of DN patients and high glocse-induced HRGECs both at the mRNA and protein level. Overexpression of METTL14 increased ROS, TNF-α and IL-6 levels and apoptosis in HRGECs. Conversely, METTL14 silence decreased the levels of ROS, TNF-α and IL-6 and cell apoptosis. We confirmed that METTL14 down-regulated α-klotho expression in an m6A-dependent manner. In addition, we also found that METTL14 aggravated renal injury and inflammation of db/db mice, which could partially rescued by α-klotho. CONCLUSION: Our data revealed that METTL14 plays a vital role in high glucose-induced glomerular endothelial cells and diabetic nephropathy through m6A modification of α-klotho.

Targeting effect of berberine on type I fimbriae of Salmonella Typhimurium and its effective inhibition of biofilm.

As a primary cause of food contamination and human diseases, Salmonella Typhimurium can easily form a biofilm that is difficult to remove from food surfaces, and often causes significant invisible threats to food safety. Although berberine has been widely used as an anti-infective drug in traditional medicine, some basic principles underlying its mechanism, especially the interaction between berberine and type I fimbriae genes, has not been verified yet. In this study, two strains of major fimbrial gene mutants (ΔfimA and ΔfimH) were constructed to demonstrate the possible action of berberine on type I fimbriae genes. The broth microdilution method was used to determine the antibacterial activity of berberine against selected strains (WT, ΔfimA, and ΔfimH). Cell agglutination experiments revealed that the number of S. Typhimurium type I fimbriae reduced after berberine treatment, which was consistent with transmission electron microscopy results. Quantitative real-time PCR experiments also confirmed that berberine reduced fimA gene expression, indicating a certain interaction between berberine and fimA gene. Furthermore, confocal laser scanning microscopy imaging of biofilm clearly revealed that berberine prevents biofilm formation by reducing the number of type I fimbriae. Overall, it is well speculated for us that berberine could be an excellent combating-biofilm drug in clinical microbiology and food preservation. KEY POINTS: • Reduce the number of fimbriae. • Berberine targeting fimA. • Effective biofilm inhibitor.

Selection of water source for water transfer based on algal growth potential to prevent algal blooms.

Water transfer is becoming a popular method for solving the problems of water quality deterioration and water level drawdown in lakes. However, the principle of choosing water sources for water transfer projects has mainly been based on the effects on water quality, which neglects the influence in the variation of phytoplankton community and the risk of algal blooms. In this study, algal growth potential (AGP) test was applied to predict changes in the phytoplankton community caused by water transfer projects. The feasibility of proposed water transfer sources (Baqing River and Jinsha River) was assessed through the changes in both water quality and phytoplankton community in Chenghai Lake, Southwest China. The results showed that the concentration of total nitrogen (TN) and total phosphorus (TP) in Chenghai Lake could be decreased to 0.52 mg/L and 0.02 mg/L respectively with the simulated water transfer source of Jinsha River. The algal cell density could be reduced by 60%, and the phytoplankton community would become relatively stable with the Jinsha River water transfer project, and the dominant species of Anabaena cylindrica evolved into Anabaenopsis arnoldii due to the species competition. However, the risk of algal blooms would be increased after the Baqing River water transfer project even with the improved water quality. Algae gained faster proliferation with the same dominant species in water transfer source. Therefore, water transfer projects should be assessed from not only the variation of water quality but also the risk of algal blooms.

An enzyme-free fluorometric nanoprobe for chloramphenicol based on signal amplification using graphene oxide sheets.

A sensitive and selective method for the determination of the antibiotic chloramphenicol (CAP) is described, which is based on double signal amplification and GO as an efficient fluorescence quencher. The nucleic acid probe is composed of three well-defined regions, viz. the signal probe I, the signal probe II, and the capture probe. The capture probe will bind to CAP specifically and the signal probes produce a significant fluorescence signal. One end of the signal probes is labeled with the fluorophore 6-carboxyfluorescein (FAM). The labeled probes can be adsorbed on graphene oxide (GO) via π-stacking interactions, upon which the green fluorescence of FAM (measured at excitation/emission wavelengths of 490/514 nm) is quenched. On addition of CAP, the aptamer/CAP complexes are formed, and this leads to the restoration of fluorescence due to the removal of the probes from GO. The double signal probes, together with GO as quencher, improve the fluorescence signal significantly and lower the detection limit. Under optimized conditions, the assay works in the 20- to 200-ppb CAP concentration range and has a 0.3-ppb detection limit. It is also successfully applied to the determination of CAP in spiked swine urine samples. The recoveries from spiked swine urine samples are between 97.73 and 108.56%, and the repeatability (expressed as the RSD) is between 4.66 and 8.90%. Graphical abstract The constructed DNA probes form a stable structure and bind to chloramphenicol specifically. One end of signal probes was labeled with the fluorophore 6-carboxyfluorescein (FAM). The detection sensitivity of chloramphenicol was significantly enhanced by using double signal amplification, which was superior to the traditional methods. The quantities of CAP can be achieved by fluorescence increment.

G-quadruplex-based assay combined with aptamer and gold nanoparticles for Escherichia coli K88 determination.

A colorimetric method was developed using G-quadruplex and gold nanoparticles (AuNPs) for determination of Escherichia coli K88 (ETEC K88). It was composed of two modules: (1) an aptamer as biorecognizing element and (2) a capturing DNA (modified with AuNPs at 5') as a transducer. In the absence of target bacteria, the aptamer can form stable double strands with capturing DNA, preventing the binding of capturing DNA to the G-quadruplex. However, the double strands of capturing DNA and aptamer are untied due to the stronger binding of aptamers to bacteria in the presence of target bacteria. As a result, the G-quadruplex binds to capture DNA and leads to the aggregation and color change of AuNPs, which can be monitored by a spectrophotometer or visualization. The quantitative determination was achieved by monitoring the optical density change of AuNPs solution at 524 nm after target addition. Under optimal conditions, the method has a low detection limit (1.35 × 102 CFU mL-1) and a linear response in the range 102 to 106 CFU mL-1. Graphical abstract The manuscripts describe a colorimetric method for the detection of ETEC K88 by using intermolecular G-quadruplex to induce the agglomeration of gold nanoparticles, which can be directly used to determine the presence of bacteria with our naked eyes.

Effect of Pb Filling and Synthesis Pressure Regulation on the Thermoelectric Properties of CoSb3.

To take the advantage of the synergy of atom filling and pressure regulation, atom Pb was assumed to play the role of fillers to occupy the Sb-icosahedron voids. In this paper, skutterudite Pb xCo4Sb11.5Te0.5 materials have been synthesized by high-pressure and high-temperature (HPHT) method with 0.5 h processing time. Although the increase of Pb filling rate increased the electrical resistivity of samples, it reduced the thermal conductivity of samples significantly. When the synthesis pressure increased, the Seebeck coefficients of Pb0.2Co4Sb11.5Te0.5 increased, and the thermal conductivity decreased. The crystal morphology and structure of samples, which can effectively affect the thermoelectric properties of materials, were investigated with XRD, Raman spectra, SEM mapping, and HR-TEM analysis.

Enhanced Thermoelectric Properties of Double-Filled CoSb3 via High-Pressure Regulating.

It has been discussed for a long time that synthetic pressure can effectively optimize thermoelectric properties. The beneficial effect of synthesis pressures on thermoelectric properties has been discussed for a long time. In this paper, it is theoretically and experimentally demonstrated that appropriate synthesis pressures can increase the figure of merit (ZT) through optimizing thermal transport and electronic transport properties. Indium and barium atoms double-filled CoSb3 samples were prepared use high-pressure and high-temperature technique for half an hour. X-ray diffraction and some structure analysis were used to reveal the relationship between microstructures and thermoelectric properties. In0.15Ba0.35Co4Sb12 samples were synthesized by different pressures; sample synthesized by 3 GPa has the best electrical transport properties, and sample synthesized by 2.5 GPa has the lowest thermal conductivity. The maximum ZT value of sample synthesized by 3.0 GPa reached 1.18.

Combat biofilm by bacteriostatic aptamer-functionalized graphene oxide.

Biofilms are the main reason for a large number deaths and high health costs. Their better protection compared to planktonic form against conventional antibiotics leads to poor treatment efficiency. Nanoagent-targeted delivery is a promising avenue for disease therapeutic, but its application targeting biofilms has not been reported currently. The roles, if any, of aptamers acting as delivery carrier and targeting factor, the graphene oxide (GO), and GO modified with aptamers against biofilms were then systematically evaluated. Here, we successfully developed an aptamer-targeted GO strategy against biofilms. We investigated the efficacy of aptamer-GO conjugates by UV spectrophotometer, inverted microscopy, and atomic force microscopy; 93.5 ± 3.4% Salmonella typhimurium biofilms were inhibited and 84.6 ± 5.1% of biofilms were dispersed by a ST-3-GO conjugate. More importantly, this conjugate represented distinctively toxicity to S. typhimurium. Thus, this strategy significantly displays excellent antibiofilm properties and may serve as a long-term solution for biofilm control.

Influence of aptamer-targeted antibiofilm agents for treatment of Pseudomonas aeruginosa biofilms.

Biofilms are bacterial communities consisting of numerous extracellular polymeric substances. Infections caused by biofilm-forming bacteria are considered to be a major threat to health security and so novel approaches to control biofilm are of importance. Aptamers are single-strand nucleic acid molecules that have high selectivity to their targets. Single-walled carbon nanotubes (SWNTs) are common nanomaterials and have been shown to be toxic to bacterial biofilms. The aim of this study was to test whether an aptamer could play a role as targeting agents to enhance the efficiency of anti-biofilm agents. Hence, two complexes (aptamer-SWNTs and aptamer-ciprofloxacin-SWNTs) based on an aptamer which targets Pseudomonas aeruginosa and SWNTs were constructed. Both complexes were assessed against P. aeruginosa biofilms. In vitro tests demonstrated that the aptamer-SWNTs could inhibit ~36% more biofilm formation than SWNTs alone. Similarly, the aptamer-ciprofloxacin-SWNTs had a higher anti-biofilm efficiency than either component or simple mixtures of two components. Our study underscores the potential of aptamers as targeting agents for anti-biofilm compounds, as well as providing a new strategy to control biofilms.

[Traditional Chinese Medicine data management policy in big data environment].

As traditional data management model cannot effectively manage the massive data in traditional Chinese medicine(TCM) due to the uncertainty of data object attributes as well as the diversity and abstraction of data representation, a management strategy for TCM data based on big data technology is proposed. Based on true characteristics of TCM data, this strategy could solve the problems of the uncertainty of data object attributes in TCM information and the non-uniformity of the data representation by using modeless properties of stored objects in big data technology. Hybrid indexing mode was also used to solve the conflicts brought by different storage modes in indexing process, with powerful capabilities in query processing of massive data through efficient parallel MapReduce process. The theoretical analysis provided the management framework and its key technology, while its performance was tested on Hadoop by using several common traditional Chinese medicines and prescriptions from practical TCM data source. Result showed that this strategy can effectively solve the storage problem of TCM information, with good performance in query efficiency, completeness and robustness.