RESUMO
Quasicrystals are materials with long-range ordering but no periodicity. We report scanning tunneling microscopy (STM) observations of quasicrystalline molecular layers on 5-fold quasicrystal surfaces. The molecules adopt positions and orientations on the surface consistent with the quasicrystalline ordering of the substrate. Carbon-60 adsorbs atop sufficiently separated Fe atoms on icosahedral Al-Cu-Fe to form a unique quasicrystalline lattice, whereas further C60 molecules decorate remaining surface Fe atoms in a quasi-degenerate fashion. Pentacene (Pn) adsorbs at 10-fold symmetric points around surface-bisected rhombic triacontahedral clusters in icosahedral Ag-In-Yb. These systems constitute the first demonstrations of quasicrystalline molecular ordering on a template.
RESUMO
Crystalline and quasicrystalline allotropes of Pb are formed by evaporation on the fivefold surface of the icosahedral (i) Ag-In-Yb quasicrystal under ultra-high vacuum. Lead grows in three dimensional quasicrystalline order and subsequently forms fivefold-twinned islands with the fcc(111) surface orientation atop of the quasicrystalline Pb. The islands exhibit specific heights (magic heights), possibly due to the confinement of electrons in the islands. We also study the adsorption behavior of C60 on the two allotropes of Pb. Scanning tunneling microcopy reveals that a high corrugation of the quasicrystalline Pb limits the diffusion of the C60 molecules and thus produces a disordered film, similar to adsorption behavior of the same molecules on the clean substrate surface. However, the sticking coefficient of C60 molecules atop the Pb islands approaches zero, regardless of the overall C60 coverage.
RESUMO
The development of chemical functionalization techniques for diamond nanocrystallites opens up ways with a view to altering their solubility in different solvents, improve interfacial adhesion of nanodiamonds with a composite matrix in new materials, and provide new possibilities for the modification of the electronic properties of nanodiamond crystallites. In this work, we present results on the chemical functionalization of nanodiamonds by amino groups using ammonia as a nitrogenation agent. Nanodiamond material used was formed by the detonation technique with average crystallite sizes of 4-5 nm. The final materials and intermediates products were characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Chemical functionalization of nanodiamonds by amino groups could enable the preparation of new nylon nano-composite materials. Presence of surface amino groups could alter pH of nanodiamond colloids towards basic values and improve colloidal stability of nanodiamond suspensions at pH close to 7. This could enable syntheses of new drug delivery systems based on nanodiamonds.
RESUMO
We report on the electronic and magnetic properties of superconductor-ferromagnet heterostructures fabricated by electron beam evaporation on to unheated thermally oxidised Si substrates. Polycrystalline Nb thin films (5 to 50 nm thick) were shown to possess reliably high superconducting critical temperatures ([Formula: see text]), which correlate well with the residual resistivity ratio (RRR) of the film. These properties improved during ex-situ annealing, resulting in [Formula: see text] and [Formula: see text]RRR increases of up 2.2 K ([Formula: see text] 40% of the pre-annealed [Formula: see text]) and 0.8 ([Formula: see text] 60% of the pre-annealed RRR) respectively. Nb/Pt/Co/Pt heterostructures showed substantial perpendicular anisotropy in the ultrathin limit (≤ 2.5 nm), even in the extreme limit of Pt(0.8 nm)/Co(1 nm)/Pt(0.6 nm). These results point to the use of electron beam evaporation as route to line-of-sight deposited, low-thickness, high quality Nb-based superspintronic multilayers.
RESUMO
Quasicrystals, materials with aperiodic long-range order, have been found in intermetallics, soft materials such as colloids and supermolecules, and also in two-dimensional monolayer films. Here we present the first example of three-dimensional growth of a single-element quasicrystalline film. Using a hitherto unexplored template, the icosahedral Ag-In-Yb quasicrystal, and various experimental techniques combined with theoretical calculations of adsorption energies, we find that lead atoms deposited on the surface occupy the positions of atoms in the rhombic triacontahedral cluster, the building block of the substrate, and thus grow in layers with different heights and adsorption energies. We show that the adlayer-adlayer interaction is crucial for stabilizing this epitaxial quasicrystalline structure. The finding opens an avenue for further investigation of the impact of the aperiodic atomic order over periodic order on the physical and chemical properties of materials.
RESUMO
Scanning tunneling microscopy and x-ray photoemission spectroscopy on a polygrain icosahedral (i-) AlPdRe quasicrystal (QC) show the formation of the twofold surfaces with symmetry and composition expected from the bulk. The predominant occurrence of the twofold surface on the polygrain i-QC having random grain orientation, as well as preferential formation of terrace edges, kinks and voids along the twofold axes, consistently indicates that the twofold surface, which has the highest atomic density, is the most stable among all the crystallographic planes.
RESUMO
The growth of Bi on Ag(111) induces different surface structures, including (â3 × â3)R30° surface alloy, Bi-(p × â3) overlayer and Bi(110) thin film, as a function of increasing Bi coverage. Here we report the study of electronic states of these structures using core level and valence band photoemission spectroscopy at room temperature. The sp-derived Shockley surface state on Ag(111) is rapidly quenched upon deposition of Bi, due to the strong variation of the in-plane surface potential in the Ag(2)Bi surface alloy. The Bi 4f core levels of the (â3 × â3)R30° alloy and Bi(110) thin film are shifted to lower binding energy by ~0.6 eV and ~0.3 eV compared with the Bi bulk value, respectively. Mechanisms inducing the core level shifts are discussed as due to a complex superposition of several factors. As Bi coverage increases and a Bi(110) overlayer forms on Ag(111), a new state is observed at ~0.9 ML arising from electronic states localized at the Ag-Bi interface. Finally the change of work function as a function of coverage is discussed on the basis of a charge transfer model.
Assuntos
Bismuto/química , Espectroscopia Fotoeletrônica/métodos , Prata/química , Ligas , Eletrônica , Elétrons , Teste de Materiais , Física/métodos , Propriedades de SuperfícieRESUMO
The deposition of 1/3 of a monolayer of Pb on Ag(111) leads to the formation of PbAg(2) surface alloy with a long range ordered (â3 × â3)R30° superstructure. A detailed analysis of this structure using low-energy electron diffraction (LEED) I-V measurements together with density functional theory (DFT) calculations is presented. We find strong correlation between experimental and calculated LEED I-V data, with the fit between the two data sets having a Pendry's reliability factor of 0.21. The Pb atom is found to replace one top layer Ag atom in each unit cell, forming a substitutional PbAg(2) surface alloy, as expected, with the Pb atoms residing approximately 0.4 Å above the Ag atoms due to their size difference. DFT calculations are in good agreement with the LEED results.
RESUMO
The growth of Bi on a pseudomorphic Bi monolayer on the fivefold surface of the icosahedral Al-Pd-Mn quasicrystal has been investigated using low energy electron diffraction and scanning tunnelling microscopy. Initially randomly oriented pseudocubic islands are formed with a preference for an even number of layers. Subsequently a morphological transformation takes place to hexagonal Bi islands, which align along high symmetry directions of the substrate. The Bi flux is found to have a strong effect on which island structure is preferred. When C(60) is adsorbed on the three different allotropes of Bi present in this system, hexagonal C(60) islands are formed in each case. On the pseudocubic and hexagonal islands, the C(60) islands are aligned with the substrate. We discuss the energetic, kinetic and geometrical factors which influence the morphological transformation referred to above.
RESUMO
We have determined the structure of a complex rhodium carbonyl chloride [Rh(CO)2Cl] molecule adsorbed on the TiO2(110) surface by the normal incidence x-ray standing wave technique. The data show that the technique is applicable to reducible oxide systems and that the dominant adsorbed species is undissociated with Rh binding atop bridging oxygen and to the Cl found close to the fivefold coordinated Ti ions in the surface. A minority geminal dicarbonyl species, where Rh-Cl bond scission has occurred, is found bridging the bridging oxygen ions forming a high-symmetry site.
RESUMO
Precise control of the pitch angle of the crystals in a double-crystal monochromator is essential to preserve their accurate alignment while the instrument is scanned. Computer-controlled piezoceramic electrostrictive actuators have recently been installed to the top crystal in two monochromators at the Daresbury SRS to facilitate this. This complements the coarser control provided by the existing stepper motor to give an accurate positioning of the crystal alignment over the full rocking-curve width of the crystals. To maintain accurate alignment during a scan, a number of servo feedback options have been devised. In this paper an analysis of the performance of these drives is presented and their utility in a variety of different experimental techniques is discussed.
RESUMO
The performance of a recently commissioned beamline, designated BL4.1, at the SRS, Daresbury Laboratory, is described. This beamline covers the energy range 15 >/= hupsilon >/= 200 eV, using a spherical grating monochromator, and is equipped with a UHV surface-science endstation containing a Scienta SES200 and an HA54 angle-resolving electron-energy analyser. Design parameters and optical specifications are tabulated. Monochromator resolution has been determined by measuring the Fermi edge of a Pt foil cooled to 40 K and these values are compared with the calculated resolution. The flux delivered to the endstation has been measured directly using a calibrated photodiode. The performance of the beamline is further illustrated by reference to a study of the angular distribution of photoemitted intensity from a band-gap state on a TiO(2)(110) 1 x 2 surface.