In Silico, In Vitro and Ex Vivo Evaluation of the Antihyperglycaemic, Antioxidant and Cytotoxic Properties of Coccinia grandis L. Leaf Extract.

Research background: Coccinia grandis L. is traditionally used for the treatment of diabetes mellitus. Since the scientific evidence and mechanism of action have not yet been extensively investigated, this study aims to evaluate the antidiabetic and cytotoxic effects together with the optimisation and development of a scale-up process design for higher yields of bioactive phytocompounds from C. grandis. Experimental approach: The in silico study was conducted to predict the binding affinity of phytocompounds of C. grandis for α-amylase and α-glucosidase enzymes involved in the pathophysiology of diabetes with pharmacokinetic assessment. Response surface methodology was used to determine the optimum total phenolic content (TPC), total flavonoid content (TFC), total tannin content (TTC) and antioxidant activities (DPPH and FRAP) in 17 different experimental runs in which the parameters of microwave-assisted extraction such as temperature (50-70 °C), power (400-1000 W) and time (15-45 min) were varied. The phytocompounds were purified and identified using column chromatography, thin-layer chromatography (TLC), UV-visible spectroscopy, Fourier transform infrared spectroscopy (FTIR) and liquid chromatography-mass spectrometry (LC-MS). The in vitro antidiabetic activity was determined by α-amylase and α-glucosidase enzymatic inhibitory assays, while cytotoxic investigations were done by measuring haemolytic activity, 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) and chorioallantoic membrane (CAM) assays. Results and conclusions: The reported major bioactive compounds have shown an excellent binding affinity for α-amylase and α-glucosidase enzymes in the range of -14.28 to -36.12 kJ/mol with good pharmacokinetic properties and toxicities ranging from low to medium. The bioactive constituents such as total phenols, total flavonoids, total tannins and antioxidant activities such as DPPH and FRAP were found to be high and dependent on the optimised microwave-assisted extraction parameters such as temperature, time and power: 55 °C, 45 min and 763 W, respectively. Sixteen compounds were identified by FTIR and LC-MS spectra in the plant sample after preliminary identification, purification and TLC. The percentage of enzyme inhibition depended on the concentration of the extract (7.8-125.0 µg/mL) and was higher than that of acarbose. The haemolytic activity was in accordance with ISO standards and low toxicity was observed in the MTT and CAM assays in the range of 7.8-125.0 µg/mL, suggesting its potential use as an antidiabetic drug and for functional food development. Novelty and scientific contribution: The results of the study open up new opportunities for researchers, scientists and entrepreneurs in the food and pharmaceutical sectors to develop antidiabetic foods and medicines that help diabetics to better control their condition and maintain overall health.

Bone Remodeling Around Solid and Porous Interbody Cages in the Lumbar Spine.

Spinal fusion is an effective surgical treatment for intervertebral disk degeneration. However, the consequences of implantation with interbody cages on load transfer and bone remodeling in the vertebral bodies have scarcely been investigated. Using detailed three-dimensional models of an intact and implanted lumbar spine and the strain energy density based bone remodeling algorithm, this study aimed to investigate the evolutionary changes in distribution of bone density (ρ) around porous and solid interbody cages. Follower load technique and submodeling approach were employed to simulate applied loading conditions on the lumbar spine models. The study determined the relationship between mechanical properties and parametrical characteristics of porous body-centered-cubic (BCC) models, which corroborated well with Gibson-Ashby and exponential regression models. Variations in porosity affected the peri-prosthetic stress distributions and bone remodeling around the cages. In comparison to the solid cage, stresses and strains in the cancellous bone decreased with an increase in cage porosity; whereas the range of motion increased. For the solid cage, increase in bone density of 20-28% was predicted in the L4 inferior and L5 superior regions; whereas the model with 78% porosity exhibited a small 3-5% change in bone density. An overall increase of 9-14% bone density was predicted in the L4 and L5 vertebrae after remodeling for solid interbody cages, which may influence disk degeneration in the adjacent segment. In comparison to the solid cage, an interbody cage with 65-78% porosity could be a viable and promising alternative, provided sufficient mechanical strength is offered.

Poly(N-vinyl imidazole) Cross-Linked ß-Cyclodextrin Hydrogel for Rapid Hemostasis in Severe Renal Arterial Hemorrhagic Model.

A unique facile process has been adopted for fast assembly of a poly(N-vinyl imidazole) cross-linked ß-cyclodextrin hydrogel through microwave-assisted free radical polymerization, using N,N'-methylenebis(acrylamide) cross-linker. The copolymer possesses positive surface charge, one of the characteristic properties of an ideal hemostatic hydrogel. The functionalized imidazole-based hydrogel demonstrates rapid, superior blood coagulation kinetics under in vitro and in vivo conditions. On application to a major renal arterial hemorrhagic model, this hydrogel shows better blood clotting kinetics, leading to complete hemostasis in as few as ∼144 ± 7 s. Additionally, 350 µL of whole blood was clotted instantly, in ∼35 s, and therefore, reinforcing its hemostatic potential. The hydrogel demonstrates excellent biocompatibility, when seeded with human dermal fibroblast cells, retaining the native property of its predecessor. In addition, the hydrogel presents excellent hemocompatibility when tested with whole blood with the highest hemolytic ratio of 1.07 ± 0.05%. Moreover, it also demonstrates potential as a carrier for sustained release of an anesthetic drug, lidocaine hydrochloride monohydrate (∼83% in 24 h). The rapid hemostatic behavior of the hydrogel is coupled with its cytocompatibility and hemocompatibilty properties along with controlled drug release characteristics. These behaviors evidently demonstrate it to be an excellent alternative for a superior hemostatic material for severe hemorrhagic conditions.

Dual Functionalized Injectable Hybrid Extracellular Matrix Hydrogel for Burn Wounds.

Low strength and rapid biodegradability of acellular dermal matrix (ADM) restrict its wider clinical application as a rapid cell delivery platform in situ for management of burn wounds. Herein, the extracted ADM was modified by a dual cross-linking approach with ionic crosslinking using chitosan and covalent cross-linking using an iodine-modified 2,5-dihydro-2,5-dimethoxy-furan cross-linker, termed as CsADM-Cl. In addition, inherent growth factors and cytokines were found to be preserved in CsADM-Cl, irrespective of ionic/covalent crosslinking. CsADM-Cl demonstrated improvement in post crosslinking stiffness with a decreased biodegradation rate. This hybrid crosslinked hydrogel supported adhesion, proliferation, and migration of human foreskin-derived fibroblasts and keratinocytes. Also, the angiogenic potential of CsADM-Cl was manifested by chick chorioallantoic membrane assay. CsADM-Cl showed excellent antibacterial activity against Escherichia coli and Staphylococcus aureus. Moreover, CsADM-Cl treated full thickness burn wounds and demonstrated rapid healing marked with superior angiogenesis, well-defined dermal-epidermal junctions, mature basket weave collagen deposition, and development of more pronounced secondary appendages. Altogether, the bioactive CsADM-Cl hydrogel established significant clinical potential to support wound healing as an apt injectable antibacterial matrix to encounter unmet challenges concerning critical burn wounds.

Denaturant-Mediated Modulation of the Formation and Drug Encapsulation Responses of Gold Nanoparticles.

The extensive and diversified applications of the well-known plasmonic nanoparticle systems along with their easy and environment-friendly synthesis strategies drive us to investigate in-depth this important research field. In the current scenario, our present study deals with an important plasmonic nanomaterial, i.e., globular protein, and human serum albumin (HSA)-conjugated gold nanoparticle (HSA-Au NP) system. The well-known chemical denaturants, urea and guanidine hydrochloride (GdnHCl or GnHCl), are investigated to show detrimental effects toward the formation of gold nanoparticles; however, the effect of GdnHCl is observed to be much prominent compared to that of urea. The synthesized nanoparticle system is found to be highly biocompatible from the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT)-based cytotoxicity assay, and therefore, the applications of encapsulation of the well-known anticancer drug molecule, doxorubicin hydrochloride (Dox), in the nanoparticle system are further studied. In this drug encapsulation study, drug-metal complexation between Dox and HAuCl4·3H2O has been discussed elaborately. Similar to the nanoparticle formation, the effects of denaturants on drug encapsulation have also been discovered, and interestingly, it has been observed that urea plays a positive role, whereas GdnHCl plays a negative or detrimental role toward drug encapsulation in the synthesized gold nanoparticle system. The detailed photophysical mechanisms behind the drug encapsulation in the synthesized plasmonic nanosystem at every stage have also been explored. Overall, this study will conclusively explain the influences of the extensively used chemical denaturants on the synthesis and drug encapsulation behaviors of a well-known protein-conjugated gold nanoparticle, and as a consequence, it can be highly useful and acceptable to the biomedical and pharmaceutical research communities.

Dual doped biocompatible multicolor luminescent carbon dots for bio labeling, UV-active marker and fluorescent polymer composite.

We report on metal-non-metal doped carbon dots with very high photoluminescent properties in solution. Magnesium doping to tamarind extract associated with nitrogen-doping is for the first time reported here which also produce very high quantum yield. Our aim is to develop such dual doped carbon dots which can also serve living cell imaging with easy permeation towards cells and show non-cytotoxic attributes. More importantly, the chemical signatures of the carbon dots unveiled in this work can support their easy solubilization into water; even in sub-ambient temperature. The cytotoxicity assay proves the almost negligible cytotoxic effect against human cell lines. Moreover, the use of carbon dots in UV-active marker and polymer composites are also performed which gave clear distinguishable features of fluorescent nanoparticles. Hitherto, the carbon dots can be commercially prepared without adopting any rigorous methods and also can be used as non-photo-bleachable biomarkers of living cells.

Identification and characterization of bioactive phenolic constituents, anti-proliferative, and anti-angiogenic activity of stem extracts of Basella alba and rubra.

Basella is an important green leafy vegetable species of Chenopodiaceae family and is known for its medicinal properties. Hydroxy-benzoic acids, hydroxy-cinnamic acids and flavones groups were identified and characterized from the aqueous stem extracts of B. alba and B. rubra species. Higher values of phenolics as well as antioxidant activity were noted from B. alba species extracts. The evaluation of the cytoxicity of these extracts on A431 (epidermoid carcinoma), Hep G2 (hepatocellular carcinoma) and MG 63 (osteosarcoma) cells indicated anti-proliferative activity against all the cell lines. B. alba extract showed higher anti-proliferative activity (37.95-84.86%). Chick embryo chorioallantoic membrane (CAM) assay revealed inhibition of neo-vessels formation. Significant suppression was found with extracts of B. alba at 7 mg/ml compared to that of B. rubra. This is the first study to report the anti-angiogenic activity of Basella species. These studies indicate that Basella sps can be used as a source of natural antioxidants and can be of high significance in pharmaceutical and nutraceutical industries.

A reductionist approach to extract robust molecular markers from microarray data series - Isolating markers to track osseointegration.

Complexities in the full genome expression studies hinder the extraction of tracker genes to analyze the course of biological events. In this study, we demonstrate the applications of supervised machine learning methods to reduce the irrelevance in microarray data series and thereby extract robust molecular markers to track biological processes. The methodology has been illustrated by analyzing whole genome expression studies on bone-implant integration (ossointegration). Being a biological process, osseointegration is known to leave a trail of genetic footprint during the course. In spite of existence of enormous amount of raw data in public repositories, researchers still do not have access to a panel of genes that can definitively track osseointegration. The results from our study revealed panels comprising of matrix metalloproteinases and collagen genes were able to track osseointegration on implant surfaces (MMP9 and COL1A2 on micro-textured; MMP12 and COL6A3 on superimposed nano-textured surfaces) with 100% classification accuracy, specificity and sensitivity. Further, our analysis showed the importance of the progression of the duration in establishment of the mechanical connection at bone-implant surface. The findings from this study are expected to be useful to researchers investigating osseointegration of novel implant materials especially at the early stage. The methodology demonstrated can be easily adapted by scientists in different fields to analyze large databases for other biological processes.

Citrate cross-linked gels with strain reversibility and viscoelastic behavior accelerate healing of osteochondral defects in a rabbit model.

Most living tissues are viscoelastic in nature. Self-repair due to the dissipation of energy by reversible bonds prevents the rupture of the molecular backbone in these tissues. Recent studies, therefore, have aimed to synthesize biomaterials that approximate the mechanical performance of biological materials with self-recovery properties. We report an environmentally friendly method for the development of ionotropically cross-linked viscoelastic chitosan gels with a modulus comparable to that of living tissues. The strain recovery property was found to be highest for the gels with the lowest cross-linking density. The force-displacement curve showed significant hysteresis due to the presence of reversible bonds in the cross-linked gels. Nanoindentation studies demonstrated the creep phenomenon for the cross-linked chitosan gels. Creep, hysteresis, and plasticity index confirmed the viscoelastic behavior of the cross-linked gels. The viscoelastic gels were implanted at osteochondral defect sites to assess the tissue regeneration ability. In vivo results demonstrated early cartilage formation and woven bone deposition for defects filled with the gels compared to nontreated defects.

The heat-chill method for preparation of self-assembled amphiphilic poly(ε-caprolactone)-poly(ethylene glycol) block copolymer based micellar nanoparticles for drug delivery.

A new method is developed for preparation of amphiphilic block copolymer micellar nanoparticles and investigated as a delivery system for celecoxib, a hydrophobic model drug. Biodegradable block copolymers of poly(ethylene glycol) (PEG) and poly(ε-caprolactone) (PCL) were synthesized by ring opening copolymerization and characterized thoroughly using FTIR, (1)H NMR and GPC. The block copolymer was dispersed in distilled water at 60 °C and then it was chilled in an ice bath for the preparation of the micellar nanoparticles. Polymers self-assembled to form micellar nanoparticles (<50 nm) owing to their amphiphilic nature. The prepared micellar nanoparticles were analyzed using HR-TEM, DLS and DSC. The cytotoxicity of the polymer micellar nanoparticles was investigated against HaCaT cell lines. The study of celecoxib release from the micellar nanoparticles was carried out to assess their suitability as a drug delivery vehicle. Addition of the drug to the system at low temperature is an added advantage of this method compared to the other temperature assisted nanoparticle preparation techniques. In a nutshell, polymer micellar nanoparticles prepared using the heat-chill method are believed to be promising for the controlled drug release system of labile drugs, which degrade in toxic organic solvents and at higher temperatures.

Ex vivo bio-compatibility of honey-alginate fibrous matrix for HaCaT and 3T3 with prime molecular expressions.

Honey's inherent compositional diversity, bio-compatibility and time tested therapeutic efficacy, especially in tissue repair as a topical agent, attract researchers towards harnessing its biomaterial potential particularly in developing matrix for tissue engineering applications. Hence, this study fabricates fibrous mat from optimum honey-alginate formulation and alginate solution using wet spinning technology. The physical and morphological properties of the scaffolds are assessed and finally their comparative biological performances are evaluated through in vitro studies on adherence, viability and prime molecular expression of HaCaT and 3T3 cells. The honey-alginate scaffold demonstrates better performance than that of alginate in terms of cellular adherence, viability and proper expression of cell-cell adhesion molecule (E-cadherin) and prime molecules of extra cellular matrix (Collagen I and III) by HaCaT and 3T3 respectively.

A new approach of aspheric intralamellar keratoprostheses optic design made with poly(2-hydroxy ethylmethacrylate) hydrogel.

Keratoprosthesis (KPro) is a surgical procedure largely confined to end-stage corneal blindness correction, where artificial cornea substitutes the native tissue. Though the problem of bio integration was addressed partially by strategic utilization of synthetic polymers and native tissue, major challenges like optical performance and design-associated post-operative complications of KPro were overlooked. Herein, a novel intralamellar KPro design is conceptualized to address these challenges using a light-transparent poly(2-hydroxy ethylmethacrylate) (pHEMA) hydrogel with good shape memory. pHEMA-based optics' theoretically modelled refractive surfaces for both phakic and aphakic conditions were investigated against the standard Navarro model and optimized to new aspheric geometries having high optical functionality utilizing the Zemax OpticStudio software. The optical clear aperture size standardized achieved a 15% improvement in the illumination field. The introduction of asphericity on the two refractive surfaces of the optic on both models resulted in substantial improvements in the spot spread confinement on the retina, spatial resolution, and Seidel aberration. The design simulation study shows that the developed materials' optical characteristics coupled with newly optimized refractive surface geometries can indeed deliver very high visual performance. Furthermore, the procedure can be adapted to analyze and optimize the optical performance of a KPro, intraocular lens, or contact lens.

Assessment of chitosan-coated zinc cobalt ferrite nanoparticle as a multifunctional theranostic platform facilitating pH-sensitive drug delivery and OCT image contrast enhancement.

Colorectal cancer (CC) is one of the most predominant malignancies in the world, with the current treatment regimen consisting of surgery, radiation therapy, and chemotherapy. Chemotherapeutic drugs, such as 5-fluorouracil (5-FU), have gained popularity as first-line antineoplastic agents against CC but have several drawbacks, including variable absorption through the gastrointestinal tract, inconsistent liver metabolism, short half-life, toxicological reactions in several organ systems, and others. Therefore, herein, we develop chitosan-coated zinc-substituted cobalt ferrite nanoparticles (CZCFNPs) for the pH-sensitive (triggered by chitosan degradation within acidic organelles of cells) and sustained delivery of 5-FU in CC cells in vitro. Additionally, the developed nanoplatform served as an excellent exogenous optical coherence tomography (OCT) contrast agent, enabling a significant improvement in the OCT image contrast in a CC tissue phantom model with a biomimetic microvasculature. Further, this study opens up new possibilities for using OCT for the non-invasive monitoring and/or optimization of magnetic targeting capabilities, as well as real-time tracking of magnetic nanoparticle-based therapeutic platforms for biomedical applications. Overall, the current study demonstrates the development of a CZCFNP-based theranostic platform capable of serving as a reliable drug delivery system as well as a superior OCT exogenous contrast agent for tissue imaging.

Photo-annealable agarose microgels for jammed microgel printing: Transforming thermogelling hydrogel to a functional bioink.

Three-dimensional (3D) printing of hydrogel structures using jammed microgel inks offer distinct advantages of improved printing functionalities, as these inks are strain-yielding and self-recovering types. However, interparticle binding in granular hydrogel inks is a challenge to overcome the limited integrity and reduced macroscale modulus prevalent in the 3D printed microgel scaffolds. In this study, we prepared chemically annealable agarose microgels through a process of xerogel rehydration, applying a low-cost and high throughput method of spray drying. The crosslinked jammed microgel matrix is found to have superior mechanical properties with a Young's modulus of 2.23 MPa and extensibility up to 7.2%, surpassing those of traditional biopolymer-based and microgel-based inks. Furthermore, this study addresses the complexities encountered in the existing system of printing thermoresponsive agarose bioink using this jammed microgel printing approach. The jammed agarose microgel ink exhibited to be self-recovering, yield stress fluid and validated the temperature-independent printing. Furthermore, the 3D printed jammed microgel scaffold demonstrated good cell responsiveness as evaluated through the viability and morphological study in-vitro with mesenchymal stem cells cultured in it. This unique fabrication approach offers exciting possibilities to expand on microgel printing for varied requirements in tissue engineering.

Study on the Bioactivity Response of the Newly Developed Zn-Cu-Mn/Mg Alloys for Biodegradable Implant Application.

Scaffolds play a crucial role in bone tissue engineering to support the defect area through bone regeneration and defect reconstruction. Promising tissue regeneration without negative repercussions and avoidance of the lifelong presence inside the body make bioresorbable metals prosper in the field of regenerative medicine. Recently, Zn and its alloys have emerged as promising biodegradable materials for their moderate degradation rate and satisfactory biocompatibility. Nevertheless, it is very challenging for cells to adhere and grow over the Zn surface alone, which influences the tissue-implant integration. In this study, an attempt has been made to systematically investigate the bioactivity responses in terms of in vitro hemocompatibility, cytotoxicity, antibacterial activity, and in vivo biocompatibility of newly developed Zn-2Cu-0.5Mn/Mg alloy scaffolds with different surface roughness. The rough surface of Zn-2Cu-0.5Mg shows the highest degradation rate of 0.16 mm/yr. The rough surface exhibits a prominent role in the adsorption of protein, further enhancing cell adhesion. Concentration-dependent alloy extract shows the highest cell proliferation for 12.5% of the extract with a maximum cell viability of 101% in Zn-2Cu-0.5Mn and 108% in Zn-2Cu-0.5Mg after 3 d. Acceptable hemolysis percentages (less than 5%) with promising anticoagulation properties are observed for all of the conditions. Enhanced antibacterial (Staphylococcus aureus and Escherichia coli) activity due to a significant effect of ions illustrates the maximum killing effect on the bacterial colony for the rough Zn-2Cu-0.5Mg alloy. In addition, it is observed that for rough Zn-2Cu-0.5Mn/Mg alloys, the inflammatory response is minimal after subcutaneous implantation, and neo-bone tissue forms in the defect areas of the rat femur with satisfactory biosafety response. The osseointegration property of the Zn-2Cu-0.5Mg alloy is comparable to that of the Zn-2Cu-0.5Mn alloy. Therefore, the rough surface of the Zn-2Cu-0.5Mg alloy has the potential to enhance biocompatibility and promote better osseointegration activity with host tissues for various biomedical applications.

Bioactive self-assembling silk fibroin-sericin films for skin tissue engineering.

The quest for an ideal wound dressing material has been a strong motivation for researchers to explore novel biomaterials for this purpose. Such explorations have led to the extensive use of silk fibroin (SF) as a suitable polymer for several applications over the years. Unfortunately, another major silk protein-sericin has not received its due attention yet in spite of having favorable biological properties. In this study, we report an approach of blending SF and silk sericin (SS) without the usage of chemical crosslinkers is made possible by the usage of formic acid which evaporates to induceß-sheets formation to form cytocompatible films. Raman spectroscopy confirms the presence of SF/SS components in blend and formation ofß-sheet in films.In situ, gelation kinetics studies were conducted to understand the change in gelation properties with addition of sericin into SF. Methyl thiazolyl tetrazolium and live/dead assays were performed to study cellular attachment, viability and proliferation on SF/SS films. The antibacterial properties of SF/SS films were tested using Gram-negative and Gram-positive bacteria. The re-structured SF/SS films were stable, transparent, show good mechanical properties, antibacterial activity and cytocompatibility, therefore can serve as suitable biomaterial candidates for skin regeneration applications.

Feasibility Insights of the Green-Assisted Calcium-Phosphate Coating on Biodegradable Zinc Alloys for Biomedical Application: In Vitro and In Vivo Studies.

In the field of bone tissue engineering, recently developed Zn alloy scaffolds are considered potential candidates for biodegradable implants for bone regeneration and defect reconstruction. However, the clinical success of these alloys is limited due to their insufficient surface bioactivities. Further, the higher concentration of Zn2+ produced during degradation promotes antibacterial activity, but deteriorates osteogenic properties. This study fabricated an Azadirachta indica (neem)-assisted brushite-hydroxyapatite (HAp) coating on the recently developed Zn-2Cu-0.5Mg alloy to tackle the above dilemma. The microstructure, degradation behavior, antibacterial activity, and hemocompatibility, along with in vitro and in vivo cytocompatibility of the coated alloys, are systematically investigated. Microstructural analysis reveals flower-like morphology with uniformly grown flakes for neem-assisted deposition. The neem-assisted deposition significantly improves the adhesion strength from 12.7 to 18.8 MPa, enhancing the mechanical integrity. The potentiodynamic polarization study shows that the neem-assisted deposition decreases the degradation rate, with the lowest degradation rate of 0.027 mm/yr for the ZHN2 sample. In addition, the biomineralization process shows the apatite formation on the deposited coating after 21 days of immersion. In vitro cytotoxicity assay exhibits the maximum cell viability of 117% for neem-assisted coated alloy in 30% extract after 5d and the improved cytocompatibility which is due to the controlled release of Zn2+ ions. Meanwhile, neem-assisted coated alloy increases the ZOI by 32 and 24% for Gram-positive and Gram-negative bacteria, respectively. Acceptable hemolysis (<5%) and anticoagulation parameters demonstrate a promising hemocompatibility of the coated alloy. In vivo implantation illustrates a slight inflammatory response and vascularization after 2 weeks of subcutaneous implantation, and neo-bone formation in the defect areas of the rat femur. Micro-CT and histology studies demonstrate better osseointegration with satisfactory biosafety response for the neem-assisted coated alloy as compared to that without neem-assisted deposition. Hence, this neem-assisted brushite-Hap coating strategy elucidates a new perspective on the surface modification of biodegradable implants for the treatment of bone defects.

Enhanced toughness and strength of 3D printed carbide-oxide composite for biomedical applications.

Natural materials derived/extracted Ceramics is an excellent material for developing ceramic-based orthopedic implants. Recently, we have demonstrated an easily scalable, energy-efficient green method to extract ceramic particles from bio-waste i.e. chicken bone. Though the chicken bone extract (CBE) has good biocompatibility, it lacks good mechanical properties in the 3D printed condition as that of human bones. Here, we have reinforced CBE with different weight proportions of silicon carbide to improve the mechanical characteristics of the composite. The hybrid of CBE (oxide) and carbide (SiC) is sintered at different temperatures to understand the effect of the interface of the two ceramics. It is observed that temperature has minimal effect and composition has a noticeable effect on mechanical strength as well as bio-toxicity. The toughness (∼3.58 MJ/m3) and compressive strength (∼64.64 MPa) of the 90:10 composition sintered at 1250 °C show the maximum optimum values. A mathematical model has also been developed to predict and correlate the toughness with porosity, volumetric loading, and elastic modulus of the 3D-printed ceramic composite.

Investigating the Effect of Polypyrrole-Gelatin/Silk Fibroin Hydrogel Mediated Pulsed Electrical Stimulation for Skin Regeneration.

In clinical practice to treat complex injuries, the application of electrical stimulation (ES) directly to the skin complicates the wound. In this work, the effect of a conductive hydrogel mediated electric field on skin regeneration is investigated. Polypyrrole incorporated matrices of gelatin and silk fibroin were prepared by two-step interfacial polymerization. The maximum electrical conductivity of 10-4 S cm-1 was achieved when 200 mM polypyrrole was loaded. Mechanically stable and cytocompatible hydrogels were evidenced to have antioxidant and blood compatible characteristics. Human dermal fibroblast cells responded to pulsed stimulation of 100 or 300 mV mm-1 as observed from the increased expressions of TGFß1, αSMA, and COLIAI genes. Further, the increase in the αSMA protein expression with the magnitude of electrical stimulation also suggested transdifferentiation of the fibroblast to myofibroblast. Moreover, Raman spectroscopy identified two fingerprint regions (collagen and lipid) to differentiate ES treated and nontreated samples. Therefore, the combination of hydrogels and electrical stimulation has potential therapeutic effects for accelerating the rate of skin regeneration.

Thermoresponsive keratin-methylcellulose self-healing injectable hydrogel accelerating full-thickness wound healing by promoting rapid epithelialization.

Chronic wounds suffer from impaired healing due to microbial attack and poor vascular growth. Thermoresponsive hydrogels gained attention in wound dressing owing to their gelation at physiological temperature enabling them to take the shape of asymmetric wounds. The present study delineates the development of thermoresponsive hydrogel (MCK), from hair-derived keratin (K) and methylcellulose (MC) in the presence of sodium sulfate. The gelation temperature (Tg) of this hydrogel is in the range of 30 °C to 33 °C. Protein-polymer interaction leading to thermoreversible sol-gel transition involved in MCK blends has been analyzed and confirmed by FTIR, XRD, and thermal studies. Keratin, has introduced antioxidant properties to the hydrogel imparted cytocompatibility towards human dermal fibroblasts (HDFs) as evidenced by both MTT and live dead assays. In vitro wound healing assessment has been shown by enhanced migration of HDFs in the presence of MCK hydrogel compared to the control. Also, CAM assay and CD31 expression by the Wistar rat model has shown increased blood vessel branching after the implantation of MCK hydrogel. Further, in vivo study, demonstrated MCK efficacy of hydrogel in accelerating full-thickness wounds with minimal scarring in Wistar rats, re-epithelialization, and reinstatement of the epidermal-dermal junction thereby exhibiting clinical relevance for chronic wounds.