Improved cellular response on functionalized polypyrrole interfaces.

Neuroregeneration strategies involve multiple factors to stimulate nerve regeneration. Neural support with chemical and physical cues to optimize neural growth and replacing the lesion neuron and axons are crucial for designing neural scaffolds, which is a promising treatment approach. In this study, polypyrrole polymerization and its functionalization at the interface developed by glycine and gelatin for further optimization of cellular response. Nanofibrous scaffolds were fabricated by electrospinning of polyvinyl alcohol and chitosan solutions. The electrospun scaffolds were polymerized on the surface by pyrrole monomers to form an electroactive interface for further applications in neural tissue engineering. The polymerized polypyrrole showed a positive zeta potential value of 57.5 ± 5.46 mV. The in vitro and in vivo biocompatibility of the glycine and gelatin-functionalized polypyrrole-coated scaffolds were evaluated. No inflammatory cells were observed for the implanted scaffolds. Further, DAPI nucleus staining showed a superior cell attachment on the gelatin-functionalized polypyrrole-coated scaffolds. The topography and tuned positively charged polypyrrole interface with gelatin functionalization is expected to be particularly efficient physical and chemical simultaneous factors for promoting neural cell adhesion.

Electrical stimulation of somatic human stem cells mediated by composite containing conductive nanofibers for ligament regeneration.

One of the advances in the field of biomedical nanotechnology, is conductive nanofiber fabrication and the discovery of its applications. Biocompatible flexible nanofibers that have a good biocompatibility, mechanical properties and morphology. Poly (3, 4-ethylene dioxythiophene) (PEDOT) is a conductive polymer that has recently been used in medical applications. In this study, the electrospinning technique and vapor phase polymerization combination method with freeze drying was used to produce Silk fibroin/PEDOT/Chitosan nanocomposite scaffold. The aim of our study was to develop a ligament construct of PEDOT/Silk bilayer nanofibrous scaffold, to mimic the aligned collagen fiber bundles and Chitosan sponge coating was done on these fibrous scaffolds, to mimic the glycosaminoglycans of ECM sheath. The developed constructs were characterized. The unrestricted somatic human stem cells (USSC), were cultured on the scaffold. Then, the effect of applying DC electric pulses to cells cultured on polymer was assessed. Cellular function was actively exhibited in scaffold with electrical induction, as evident by the high expression of collagen I, collagen III, decorin, biglycan and aggrecan genes. Novel scaffold plus electrical stimulation shows facilitating cell seeding and promoting cell proliferation, differentiation. This composites can be used in this new field for stem cells differentiation to target tissues.

Neuroregenerative effects of olfactory ensheathing cells transplanted in a multi-layered conductive nanofibrous conduit in peripheral nerve repair in rats.

BACKGROUND: The purpose of this study was to evaluate the efficacy of a multi-layered conductive nanofibrous hollow conduit in combination with olfactory ensheathing cells (OEC) to promote peripheral nerve regeneration. We aimed to harness both the topographical and electrical cues of the aligned conductive nanofibrous single-walled carbon nanotube/ poly (L-lactic acid) (SWCNT/PLLA) scaffolds along with the neurotrophic features of OEC in a nerve tissue engineered approach. RESULTS: We demonstrated that SWCNT/PLLA composite scaffolds support the adhesion, growth, survival and proliferation of OEC. Using microsurgical techniques, the tissue engineered nerve conduits were interposed into an 8 mm gap in sciatic nerve defects in rats. Functional recovery was evaluated using sciatic functional index (SFI) fortnightly after the surgery. Histological analyses including immunohistochemistry for S100 and NF markers along with toluidine blue staining (nerve thickness) and TEM imaging (myelin sheath thickness) of the sections from middle and distal parts of nerve grafts showed an increased regeneration in cell/scaffold group compared with cell-free scaffold and silicone groups. Neural regeneration in cell/scaffold group was very closely similar to autograft group, as deduced from SFI scores and histological assessments. CONCLUSIONS: Our results indicated that the tissue engineered construct made of rolled sheet of SWCNT/PLLA nanofibrous scaffolds and OEC could promote axonal outgrowth and peripheral nerve regeneration suggesting them as a promising alternative in nerve tissue engineering.

Coating of electrospun poly(lactic-co-glycolic acid) nanofibers with willemite bioceramic: improvement of bone reconstruction in rat model.

We have investigated the combination effects of bioceramics and poly(lactide-co-glycolide) (PLGA) on bone reconstruction in calvarial critical size defects using a rat model. Willemite (Zn2SiO4) ceramics were prepared and coated on the surface of electrospun fabricated scaffolds. After scaffolds and nanoparticles characterization, osteoconductivity of the construct was analyzed using digital mammography, multislice spiral-computed tomography (MSCT) imaging, and histological analysis. Eight weeks after implantation, no sign of inflammation was observed at the site of the osseous defect. The results showed that the ceramics supported bone regeneration and highest bone reconstruction were observed in willemite-coated PLGA. This suggests that electrospun PLGA nanofibers coated with BG are potential candidate implants for bone tissue engineering applications.

Effective combination of hydrostatic pressure and aligned nanofibrous scaffolds on human bladder smooth muscle cells: implication for bladder tissue engineering.

Bladder tissue engineering has been the focus of many studies due to its highly therapeutic potential. In this regard many aspects such as biochemical and biomechanical factors need to be studied extensively. Mechanical stimulations such as hydrostatic pressure and topology of the matrices are critical features which affect the normal functions of cells involved in bladder regeneration. In this study, hydrostatic pressure (10 cm H(2)O) and stretch forces were exerted on human bladder smooth muscle cells (hBSMCs) seeded on aligned nanofibrous polycaprolactone/PLLA scaffolds, and the alterations in gene and protein expressions were studied. The gene transcription patterns for collagen type I, III, IV, elastin, α-SMA, calponin and caldesmon were monitored on days 3 and 5 quantitatively. Changes in the expressions of α-SMA, desmin, collagen type I and III were quantified by Enzyme-linked immuno-sorbent assay. The scaffolds were characterized using scanning electron microscope, contact angle measurement and tensile testing. The positive effect of mechanical forces on the functional improvement of the engineered tissue was supported by translational down-regulation of α-SMA and VWF, up-regulation of desmin and improvement of collagen type III:I ratio. Altogether, our study reveals that proper hydrostatic pressure in combination with appropriate surface stimulation on hBSMCs causes a tissue-specific phenotype that needs to be considered in bladder tissue engineering.

Osteogenic Differentiation of MSCs on Fibronectin-Coated and nHA-Modified Scaffolds.

The increasing demand for biocompatible bone substitutes has made it a priority to tissue engineering and regenerative medicine scientists. Combination of minerals, growth factors, and extracellular matrix (ECM) proteins with nanofibrous scaffolds is a potential promising strategy for bone reconstruction and clinical applications. In this study, nanohydroxyapatite (nHA) was incorporated in electrospun nanofibrous polycaprolactone (PCL) scaffolds coated with fibronectin (Fn). The potential bone regeneration capacities of these scaffolds were evaluated in vitro and in vivo using mouse mesenchymal stem cells (mMSCs). The interconnected pores and proper mechanical characteristics of the fabricated electrospun PCL mats in combination with nHA and Fn provided suitable environment for cell attachment, proliferation, and enhanced osteogenic differentiation. The synergistic effect of Fn and nHA on the both in vitro and in vivo increase of calcium deposition was assessed by biochemical analysis. In addition, alkaline phosphatase (ALP) activity in nHA-incorporated PCL scaffold (PCL/nHA) and Fn-coated PCL/nHA (PCL/nHA/Fn) were significantly higher in comparison to the control group. Quantitative real-time reverse transcription polymerase chain reaction (RT-PCR) analyses of important bone-related genes (ALP, osteocalcin, osteopontin, and Runx2) revealed that Fn has additive effect on promoting the osteogenic differentiation. The aforementioned results indicated that nanofibrous PCL/nHA scaffold coated with Fn is a promising candidate for bone-tissue engineering applications.

The role of biodegradable engineered random polycaprolactone nanofiber scaffolds seeded with nestin-positive hair follicle stem cells for tissue engineering.

BACKGROUND: Tissue engineering is a new approach to reconstruction and/or regeneration of lost or damaged tissue. The purpose of this study was to fabricate the polycaprolactone (PCL) random nanofiber scaffold as well as evaluation of the cell viability, adhesion, and proliferation of rat nestin-positive hair follicle stem cells (HFSCs) in the graft material using electrospun PCL nanofiber scaffold in regeneration medicine. MATERIALS AND METHODS: The bulge HFSCs was isolated from rat whiskers and cultivated in Dulbecco's modified Eagle's medium/F12. To evaluate the biological nature of the bulge stem cells, flow cytometry using nestin, CD34 and K15 antibodies was performed. Electrospinning was used for the production of PCL nanofiber scaffolds. Furthermore, scanning electron microscopy (SEM) for HFSCs attachment, infiltration, and morphology, 3-(4, 5-di-methylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay for cell viability and cytotoxicity, tensile strength of the scaffolds mesh, and histology analysis were used. RESULTS: Flow cytometry showed that HFSCs were nestin and CD34 positive but K15 negative. The results of the MTT assay showed cell viability and cell proliferation of the HFSCs on PCL nanofiber scaffolds. SEM microscopy photographs indicated that HFSCs are attached and spread on PCL nanofiber scaffolds. Furthermore, tensile strength of the scaffolds mesh was measured. CONCLUSION: The results of this study revealed that modified PCL nanofiber scaffolds are suitable for HFSCs seeding, attachment, and proliferation. Furthermore, HFSCs are attached and proliferated on PCL nanofiber scaffolds.

Cytocompatibility of a conductive nanofibrous carbon nanotube/poly (L-Lactic acid) composite scaffold intended for nerve tissue engineering.

The purpose of this study was to fabricate a conductive aligned nanofibrous substrate and evaluate its suitability and cytocompatibility with neural cells for nerve tissue engineering purposes. In order to reach these goals, we first used electrospinning to fabricate single-walled carbon-nanotube (SWCNT) incorporated poly(L-lactic acid) (PLLA) nanofibrous scaffolds and then assessed its cytocompatibility with olfactory ensheathing glial cells (OEC). The plasma treated scaffolds were characterized using scanning electron microscopy and water contact angle. OECs were isolated from olfactory bulb of GFP Sprague-Dawley rats and characterized using OEC specific markers via immunocytochemistry and flow cytometery. The cytocompatibility of the conductive aligned nano-featured scaffold was assessed using microscopy and MTT assay. We indicate that doping of PLLA polymer with SWCNT can augment the aligned nanosized substrate with conductivity, making it favorable for nerve tissue engineering. Our results demonstrated that SWCNT/PLLA composite scaffold promote the adhesion, growth, survival and proliferation of OEC. Regarding the ideal physical, topographical and electrical properties of the scaffold and the neurotrophic and migratory features of the OECs, we suggest this scaffold and the cell/scaffold construct as a promising platform for cell delivery to neural defects in nerve tissue engineering approaches.

Controlled release of rhEGF and rhbFGF from electrospun scaffolds for skin regeneration.

Controlled delivery of multiple therapeutic agents can be considered as an effective approach in skin tissue engineering. In this study, recombinant human epidermal growth factor (rhEGF) and recombinant human basic fibroblast growth factor (rhbFGF) encapsulated in PLGA microspheres were loaded in hybrid scaffolds of PLGA and PEO. The scaffolds with various formulations were fabricated through electrospinning in order to maintain dual, individual or different release rate of rhEGF and rhbFGF. Morphological, physical and mechanical properties of the scaffold were investigated. The scaffold possessed uniform morphology with an average diameter of 280 nm for PLGA and 760 nm for PEO nanofibers. Furthermore, the mechanical properties of the scaffolds were shown to be akin to those of human skin. Bioactivity of the scaffolds for human skin fibroblasts was evaluated. The HSF acquired significant proliferation and well-spread morphology on the scaffolds particularly in the case of different release rate of rhEGF and rhbFGF which implies the synergistic effect of the growth factors. Additionally, collagen and elastin gene expression was significantly up-regulated in the HSF seeded on the scaffolds in the case of individual delivery of rhEGF and dual delivery of rhEGF and rhbFGF. In conclusion, the prepared scaffolds as a suitable supportive substrate and multiple growth factor delivery system can find extensive utilization in skin tissue engineering.

The Effects of Plasma Treated Electrospun Nanofibrous Poly (ε-caprolactone) Scaffolds with Different Orientations on Mouse Embryonic Stem Cell Proliferation.

OBJECTIVE: Assessments of cell reactions such as motility, orientation and activation to the topography of the substratum will assist with the fabrication of a proper implantable scaffold for future tissue engineering applications.The current challenge is to analyze the orientation effect of elecrospun nanofibers of poly (ε-caprolactone) (PCL) on viability and proliferation of mouse embryonic stem cells (mESCs). MATERIALS AND METHODS: In this experimental study, we used the electrospinning method to fabricate nanofibrous PCL scaffolds. Chemical and mechanical characterizations were specified by the contact angle and tensile test. O2plasma treatment was used to improve surface hydrophilicity. We used the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay to evaluate mESCs adhesion and proliferation before and after surface modification. The influence of the orientation of the nanofibers on mESCs growth was evaluated by scanning electron microscopy (SEM). Statistical analysis was performed using one-way analysis of variance (ANOVA) With differences considered statistically significant at p≤0.05. RESULTS: The results showed that plasma treatment improved the hydrophilic property of PCL scaffolds. MTT assay showed a significant increase in proliferation of mESCs on plasma treated PCL (p-PCL) scaffolds compared to non-treated PCL (p=0.05). However gelatin coated tissue culture plate (TCP) had a better effect in initial cell attachment after one day of cell seeding. There was more cell proliferation on day 3 in aligned plasma treated (AP) nanofibers compared to the TCP. SEM showed optical density of the cell colonies. Aligned nanofibrous scaffolds had larger colony sizes and spread more than random nanofibrous scaffolds. CONCLUSION: This study showed that plasma treating of scaffolds was a more suitable substrate for growth and cell attachment. In addition, aligned nanofibrous scaffolds highly supported the proliferation and spreading of mESCs when compared to random nanofibrous scaffolds and TCP.

Evaluation of the Effect of NT-3 and Biodegradable Poly-L-lactic Acid Nanofiber Scaffolds on Differentiation of Rat Hair Follicle Stem Cells into Neural Cells In Vitro.

Recent improvement in neuroscience has led to new strategies in neural repair. Hair follicle stem cells are high promising source of accessible, active, and pluripotent adult stem cells. They have high affinity to differentiate to neurons. Aside from using cell-scaffold combinations for implantation, scaffolds can provide a suitable microenvironment for cell proliferation, migration, and differentiation. NT-3 is the most interesting neurotrophic factors being an important regulator of neural survival and differentiation. Since treatment duration in neural repair is very important, this study aims to evaluate the effect of NT-3 and poly-L-lactic acid (PLLA) on differentiation time of bulge stem cells of rat hair follicle to neural-like cells. HFSCs of rat whisker was isolated and cultured on PLLA and differentiated with 10 ng/mL NT-3. Biological features of cultured cells were evaluated with immunocytochemistry and flowcytometry methods by using CD34, nestin, and ßІІІ-tubulin markers. For cell viability and morphological assessment, MTT assay and SEM were performed. Our results showed that bulge stem cells of hair follicle can express CD34 and Nestin before differentiation. By using NT-3 during differentiation process, the cells showed positive reaction to ßІІІ-tubulin antibody. MTT results demonstrated that PLLA significantly increased cell viability. Finally, HFSCs adhesion was confirmed by SEM results. The results indicate that 10 ng/mL NT-3 and PLLA have significant effect on differentiation time of rat HFSCs to neural cells even in 10 days.

Synthesis and characterization of electrospun polyvinyl alcohol nanofibrous scaffolds modified by blending with chitosan for neural tissue engineering.

Among several attempts to integrate tissue engineering concepts into strategies to repair different parts of the human body, neuronal repair stands as a challenging area due to the complexity of the structure and function of the nervous system and the low efficiency of conventional repair approaches. Herein, electrospun polyvinyl alcohol (PVA)/chitosan nanofibrous scaffolds have been synthesized with large pore sizes as potential matrices for nervous tissue engineering and repair. PVA fibers were modified through blending with chitosan and porosity of scaffolds was measured at various levels of their depth through an image analysis method. In addition, the structural, physicochemical, biodegradability, and swelling of the chitosan nanofibrous scaffolds were evaluated. The chitosan-containing scaffolds were used for in vitro cell culture in contact with PC12 nerve cells, and they were found to exhibit the most balanced properties to meet the basic required specifications for nerve cells. It could be concluded that addition of chitosan to the PVA scaffolds enhances viability and proliferation of nerve cells, which increases the biocompatibility of the scaffolds. In fact, addition of a small percentage of chitosan to the PVA scaffolds proved to be a promising approach for synthesis of a neural-friendly polymeric blend.

Electrospun nanofiber-based regeneration of cartilage enhanced by mesenchymal stem cells.

Application of biomaterials in combination with stem cells is a novel tissue engineering approach to regenerate cartilage. The objective of this study was to investigate the potential of poly(vinyl alcohol)/polycaprolactone (PVA/PCL) nanofiber scaffolds seeded with rabbit bone marrow-mesenchymal stem cell (BM-MSC) for cartilage tissue engineering in vitro and in vivo. We tested the biocompatibility and mechanical properties of nanofibrous scaffolds using scanning electron microscope, MTT assay, and tensile measurements. The capacity of MSC for chondrogenic differentiation on scaffolds was examined using reverse transcription-polymer chain reaction and immunostaining. For in vivo assessments, PVA/PCL nanofiber scaffolds with or without MSC were implanted into rabbit full-thickness cartilage defects. To evaluate cartilage regeneration, semi-quantitative grading and histological analysis were performed. Our results showed that PVA/PCL scaffolds supported the proliferation and chondrogenic differentiation of MSC in vitro. Moreover, the animals treated with cell-seeded PVA/PCL scaffolds showed improved healing of defects compared with untreated control and those which received cell-free scaffolds. Our findings suggest that PVA/PCL scaffolds incorporated with MSC can serve as a suitable graft for articular cartilage reconstruction.