Lignin Microspheres Modified with Magnetite Nanoparticles as a Selenate Highly Porous Adsorbent.

Highly porous lignin-based microspheres, modified by magnetite nanoparticles, were used for the first time for the removal of selenate anions, Se(VI), from spiked and real water samples. The influence of experimental conditions: selenate concentration, adsorbent dosage and contact time on the adsorption capacity was investigated in a batch experimental mode. The FTIR, XRD, SEM techniques were used to analyze the structural and morphological properties of the native and exhausted adsorbent. The maximum adsorption capacity was found to be 69.9 mg/g for Se(VI) anions at pH 6.46 from the simulated water samples. The modified natural polymer was efficient in Se(VI) removal from the real (potable) water samples, originated from six cities in the Republic of Serbia, with an overage efficacy of 20%. The regeneration capacity of 61% in one cycle of desorption (0.5 M NaOH as desorption solution) of bio-based adsorbent was gained in this investigation. The examined material demonstrated a significant affinity for Se(VI) oxyanion, but a low potential for multi-cycle material application; consequently, the loaded sorbent could be proposed to be used as a Se fertilizer.

Efficient multistep arsenate removal onto magnetite modified fly ash.

The modification of the fly ash (FA) by magnetite (M) was performed to obtain FAM adsorbent with improved adsorption efficiency for arsenate removal from water. The novel low cost adsorbents are characterized by liquid nitrogen porosimetry (BET), scanning electron microscopy (SEM), X-ray diffraction (XRD), Mössbauer spectroscopy (MB) and Fourier transform infrared (FTIR) spectroscopy. The optimal conditions and key factors influencing the adsorbent synthesis are assessed using the response surface method (RSM). The adsorption experiment was carried out in a batch system by varying the contact time, temperature, pH, and mass of the adsorbent. The adsorption capacity of the FAM adsorbent for As(V), calculated by Langmuir model, was 19.14 mg g-1. The thermodynamic parameters showed spontaneity of adsorption with low endothermic character. The kinetic data followed the pseudo-second-order kinetic model (PSO), and Weber-Morris model indicated intra-particle diffusion as rate limiting step. Alternative to low desorption capability of the FAM was found by five consecutive adsorption/magnetite precipitation processes which gave exhausted layered adsorbent with 65.78 mg g-1 capacity. This research also has shed light on the mechanism of As(V)-ion adsorption, presenting a promising solution for the valorization of a widely abundant industrial waste.

Entropy-weighted water quality index, hydrogeochemistry, and Monte Carlo simulation of source-specific health risks of groundwater in the Morava River plain (Serbia).

Population growth, urbanization, industry, floods, and agriculture globally degrade groundwater in river plains, necessitating action for its quality assessment and management. Hence, a comprehensive methodology, including hydrogeochemical facies (Piper, Gibbs), irrigation indices (SAR, Wilcox), entropy-weighted water quality index (EWQI), positive matrix factorization (PMF), and Monte Carlo simulation of source-specific health risks was used in this study to analyze groundwater in the Morava river plain (Serbia). The results revealed a prevalent Ca-Mg-HCO3 groundwater type, influenced by water-rock interactions. Although groundwater was found suitable for irrigation, only 66.7 % of the samples were considered drinkable. Agricultural activities, natural processes, and municipal wastewater were identified as primary pollution sources. The incremental lifetime cancer risk (ILCR) and hazard index (HI) threshold exceedance for adults and children ranged from 8.5 % to 39 % of the samples, with arsenic identified as the most risk-contributing contaminant. These findings provide valuable insights for researchers studying groundwater vulnerability in river plains.

Facile fabrication of hybrid titanium(IV) isopropoxide/pozzolan nanosheets (TnS-Pz) of high photocatalytic activity: characterization and application for Cr(VI) reduction in an aqueous solution.

This paper presents the synthesis of a hybrid material through the use of natural pozzolan and titanium(IV) isopropoxide using the sol-gel method and its application in the photocatalytic hexavalent chromium reduction. The characterization data indicated a mesoporous material possessing a surface area of 271.7 m2 g-1. The morphology studies (SEM and TEM) showed nanosheet hybrid structures. The analysis of DRUV, FTIR, XRD, and Mössbauer spectroscopy provides a different electronic structure of the synthetized material when compared with the originals, proving the hybridization process between pozzolan and titanium(IV) isopropoxide. The photocatalytic reduction of Cr(VI) to Cr(III) using the hybrid material showed a better performance than conventional photocatalysts (precursor and TiO2-P25). Operational conditions such as chromium initial concentration (0.02-0.20 mM), solution pH (3-6), and type of scavenger (citric or tartaric acid) were evaluated in order to determine the best experimental conditions for the Cr(VI) photoreduction. At their optimum (catalyst load of 15 mg L-1, tartaric acid as scavenger, [scavenger]0/[Cr(VI)]0 M ratio = 3:1, pH 3, and 25 °C), the total photoreduction of 0.20 mM Cr(VI) was achieved in 180 min. The novel hybrid materials synthesized from pozzolan and titanium(IV) isopropoxide showed to be a potential catalyst for the Cr(VI) reduction in aqueous solution. Graphical abstract.

Arsenic removal by copper-impregnated natural mineral tufa part II: a kinetics and column adsorption study.

This batch and column kinetics study of arsenic removal utilized copper-impregnated natural mineral tufa (T-Cu(A-C)) under three ranges of particle size. Non-competitive kinetic data fitted by the Weber-Morris model and the single resistance mass transfer model, i.e., mass transfer coefficient kfa and diffusion coefficient (Deff) determination, defined intra-particle diffusion as the dominating rate controlling step. Kinetic activation parameters, derived from pseudo-second-order rate constants, showed low dependence on adsorbent geometry/morphology and porosity, while the diffusivity of the pores was significant to removal efficacy. The results of competitive arsenic adsorption in a multi-component system of phosphate, chromate, or silicate showed effective arsenic removal using T-Cu adsorbents. The high adsorption rate-pseudo-second-order constants in the range 0.509-0.789 g mg-1 min-1 for As(V) and 0.304-0.532 g mg1 min1 for As(III)-justified further application T-Cu(A-C) in a flow system. The fixed-bed column adsorption data was fitted using empirical Bohart-Adams, Yoon-Nelson, Thomas, and dose-response models to indicate capacities and breakthrough time dependence on arsenic influent concentration and the flow rate. Pore surface diffusion modeling (PSDM), following bed-column testing, further determined adsorbent capacities and mass transport under applied hydraulic loading rates.

Consolidated vs new advanced treatment methods for the removal of contaminants of emerging concern from urban wastewater.

Urban wastewater treatment plants (WWTPs) are among the main anthropogenic sources for the release of contaminants of emerging concern (CECs) into the environment, which can result in toxic and adverse effects on aquatic organisms and consequently on humans. Unfortunately, WWTPs are not designed to remove CECs and secondary (e.g., conventional activated sludge process, CAS) and tertiary (such as filtration and disinfection) treatments are not effective in the removal of most CECs entering WWTP. Accordingly, several advanced treatment methods have been investigated for the removal of CECs from wastewater, including consolidated (namely, activated carbon (AC) adsorption, ozonation and membranes) and new (such as advanced oxidation processes (AOPs)) processes/technologies. This review paper gathers the efforts of a group of international experts, members of the NEREUS COST Action ES1403 who for three years have been constructively discussing the state of the art and the best available technologies for the advanced treatment of urban wastewater. In particular, this work critically reviews the papers available in scientific literature on consolidated (ozonation, AC and membranes) and new advanced treatment methods (mainly AOPs) to analyse: (i) their efficiency in the removal of CECs from wastewater, (ii) advantages and drawbacks, (iii) possible obstacles to the application of AOPs, (iv) technological limitations and mid to long-term perspectives for the application of heterogeneous processes, and (v) a technical and economic comparison among the different processes/technologies.

The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent.

This study focuses on the use of raw fly ash (FA) and modified fly ash - activated by lime (MFA), as effective and low-cost adsorbents for the removal of heavy metals (Zn2+, Pb2+ and As(V)), followed by the revalorization of the exhausted adsorbent. The granulometric, elemental analysis, point of zero charge (pHPZC), radiochemical and structural characterization were conducted using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) and gamma spectrometry techniques. The optimal conditions and key factors influencing the adsorption process were assessed using the response surface method (RSM). The adsorption capacity of the MFA adsorbent for Zn2+, Pb2+ and As(V) removal, calculated by the Langmuir model, was found to be 33.13, 26.06, and 29.71 mg g-1, respectively. The kinetic and thermodynamic parameters indicated that the adsorption process is spontaneous and endothermic. Due to their low desorption potential of the exhausted adsorbents, their effective reuse was established to be feasible. For this reason, the valorization of this material as an additive in construction materials was thereafter studied, where testing its toxicity leaching (TCLP) as well as the mechanical properties of construction material containing exhausted MFA confirmed its safe use. Hence, this study points to a possible "two-in-one" reuse of coal ash, initially as an adsorbent and later as an additive in a construction material.

Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity.

The objective of this study was to investigate the modification of materials used in wastewater treatment for possible antimicrobial application(s). Granulated activated carbon (GAC) and natural clinoptilolite (CLI) were activated using Cu2+- and Zn2+- ions and the disinfection ability of the resulting materials was tested. Studies of the sorption and desorption kinetics were performed in order to determine and clarify the antimicrobial activity of the metal-activated sorbents. The exact sorption capacities of the selected sorbents, GAC and CLI, activated through use of Cu2+- ions, were 15.90 and 3.60mg/g, respectively, while for the materials activated by Zn2+- ions, the corresponding capacities were 14.00 and 4.72mg/g,. The desorption rates were 2 and 3 orders of magnitude lower than their sorption efficacy for the Cu2+-, and Zn2+-activated sorbents, respectively. The intermediate sorption capacity and low desorption rate indicated that the overall antimicrobial activity of the metal-modified sorbents was a result of metal ions immobilized onto surface sites. The effect of antimicrobial activity of free ions desorbed from the metal-activated surface may thus be disregarded. The antimicrobial activities of Cu/GAC, Zn/GAC, Cu/CLI and Zn/CLI were also tested against Escherichia coli, Staphylococcus aureus, and Candida albicans. After 15min exposure, the highest levels of cell inactivation were obtained through the Cu/CLI and the Cu/GAC against E. coli, 100.0 and 98.24%, respectively. However, for S. aureus and yeast cell inactivation, all Cu2+- and Zn2+-activated sorbents proved to be unsatisfactory. A characterization of the sorbents was performed by X-ray diffraction (XRD), X-ray photo electron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). A concentration of the adsorbed and released ions was determined by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and mass spectrometry (ICP-MS). The results showed that the antimicrobial performance of the activated sorbents depended on the surface characteristics of the material, which itself designates the distribution and the bioavailability of the activating agent.

Natural radionuclides in cigarette tobacco from Serbian market and effective dose estimate from smoke inhalation.

The activity concentrations of natural radionuclides ((40)K, (210)Pb, (210)Po, (226)Ra and (228)Ra) in 17 most frequently used cigarette brands in Serbia and corresponding effective doses due to smoke inhalation are presented. The mean annual effective doses for (210)Pb and (210)Po were estimated to be 47.3 and 724 µSv y(-1) for (210)Pb and (210)Po, respectively. Serbia currently has the highest smoking rate in the world. The results of this study indicate the high contribution of the annual effective dose due to smoke inhalation to the total inhalation dose from natural radionuclides. The more effective implementation of actions for reducing smoking prevalence in Serbia is highly needed.