Construction of Multifunctional Zinc Ion Sustained-Release Biocoating on the Surface of Carbon Fiber Reinforced Polyetheretherketone with Enhanced Anti-inflammatory Activity, Angiogenesis, and Osteogenesis.

Current treatments of carbon fiber-reinforced polyetheretherketone (CFRPEEK) as orthopedic implants remain unsatisfactory due to the bioinert surface. The multifunctionalization of CFRPEEK, which endows it with regulating the immune inflammatory response, promoting angiogenesis, and accelerating osseointegration, is critical to the intricate bone healing process. Herein, a multifunctional zinc ion sustained-release biocoating, consisting of a carboxylated graphene oxide, zinc ion, and chitosan layer, covalently grafts on the surface of amino CFRPEEK (CP/GC@Zn/CS) to coordinate with the osseointegration process. The release behavior of zinc ions theoretically conforms to the different demands in the three stages of osseointegration, including the burst release of zinc ions in the early stage (7.27 µM, immunomodulation), continuous release in the middle stage (11.02 µM, angiogenesis), and slow release in the late stage (13.82 µM, osseointegration). In vitro assessments indicate that the multifunctional zinc ion sustained-release biocoating can remarkably regulate the immune inflammatory response, decrease the oxidative stress level, and promote angiogenesis and osteogenic differentiation. The rabbit tibial bone defect model further confirms that, compared to the unmodified group, the bone trabecular thickness of the CP/GC@Zn/CS group increases 1.32-fold, and the maximum push-out force improves 2.05-fold. In this study, a multifunctional zinc ion sustained-release biocoating constructed on the surface of CFRPEEK that conforms to the requirements of different osseointegration stages can be an attractive strategy for the clinical application of inert implants.

Surface Modification of Carbon Fiber-Reinforced Polyetheretherketone with MXene Nanosheets for Enhanced Photothermal Antibacterial Activity and Osteogenicity.

Ideal bone implant materials need to provide multiple functions such as biocompatibility, non-cytotoxicity, and bone tissue regeneration guidance. To tackle this challenge, according to our previous work, carbon fiber (40 mm)-reinforced polyetheretherketone (CFPEEK) composites were developed by using 3D needle-punched CFPEEK preform molding technology. Because of the excellent mechanical properties, the CFPEEK needled felt matrix composites have a broad application prospect in orthopedic internal fixation and implant materials. In order to expand the application range of composite materials, it is very necessary to improve the surface bioactivity of composite materials. The surface modification of CFPEEK with 2D titanium carbide (MXene) nanosheets (sulfonated CFPEEK (SCFPEEK)-polydopamine (PDA)-Ti3C2Tx) for enhanced photothermal antibacterial activity and osteogenicity was explored in this study. Here, the new composites we constructed are composed of Ti3C2Tx nanosheets, PDA, and biologically inert SCFPEEK, which gave the bio-inert composites bimodal therapeutic features: photothermal antibacterial activity and in vivo osseointegration. To our knowledge, this is the first time that a CFPEEK implant with a bioactive surface modified by Ti3C2Tx nanosheets was demonstrated. Due to the synergistic photothermal therapy (PTT) treatment of Ti3C2Tx/PDA, SCFPEEK-PDA-Ti3C2Tx (SCP-PDA-Ti) absorbed heat and the temperature increased to 40.8-59.6 °C─the high temperature led to bacterial apoptosis. The SCP-PDA-Ti materials could effectively kill bacteria after 10 min of near-infrared (NIR) irradiation at 808 nm. SCP-PDA-Ti (2.5) and SCP-PDA-Ti (3.0) achieved a 100% bacteriostasis rate. More importantly, the multifunctional implant SCP-PDA-Ti shows good cytocompatibility and an excellent ability to promote bone formation in terms of cytotoxicity, diffusion, alkaline phosphatase activity, alizarin red activity, real-time polymerase chain reaction analysis, and in vivo bone defect osteogenesis experiments. This provides a more extendable development idea for the application of carbon fiber-reinforced composites as orthopedic implants.

Multifunctional 3D sponge-like macroporous cryogel-modified long carbon fiber reinforced polyetheretherketone implants with enhanced vascularization and osseointegration.

Long carbon fiber reinforced polyetheretherketone (LCFRPEEK), a newly developed high-performance composite material, is being investigated as a possible orthopedic implant. However, its inability of angiogenesis and osseointegration after implantation makes it difficult for use as a long-term osteogenic fixation implant, which limits its scope of clinical application. Therefore, we design and construct a multifunctional 3D sponge-like macroporous cryogel to modify sulfonated LCFRPEEK using a cryogelation method based on free radical photopolymerization. The cryogel is mainly composed of graphene oxide-hydroxyapatite (GO-HAP) nanocomposites and gelatin methacrylate/polyethylene glycol diacrylate (GelMA/PEGDA). The results reveal that the multifunctional LCFRPEEK implant shows excellent biocompatibility and osteogenic differentiation of rat bone marrow mesenchymal stem cells (BMSCs) due to the incorporation of HAP nanoparticles into GO-HAP nanocomposites. Systematic in vivo animal studies further confirm that the multifunctional surface improves the bone remodeling and osseointegration of the LCFRPEEK implant. Additionally, the characteristic 3D sponge-like macroporous structures of cryogels promote the ingrowth and migration of human umbilical vein endothelial cells (HUVECs) and GO in the GO-HAP also boosts HUVEC migration and tube formation showing that they are beneficial for vascularization during osteogenesis. Therefore, the developed 3D sponge-like macroporous GelMA/PEGDA/GO-HAP cryogel fabricated on sulfonated LCFRPEEK implants with enhanced angiogenesis and osseointegration capabilities has great potential for clinical use as an orthopedic implant material.

An injectable adhesive antibacterial hydrogel wound dressing for infected skin wounds.

It's an exigent need for the improvement of novel antibacterial wound dressings with the increasing threats of drug resistance caused by excessive use of the antibiotics. In this work, an injectable, adhesive, hemostatic, biocompatible and bactericidal hydrogel wound dressing was fabricated. An injectable hydrogel can fill the irregular wound due to the characteristic of reversible sol-gel transition, whereas conventional dressings don't possess this ability. Oxidized alginate (ADA) and catechol-modified gelatin (Gel-Cat) were selected as the polymer backbones and they can crosslink in situ through double dynamic bonds, which were Schiff base and catechol-Fe coordinate bond; polydopamine decorated silver nanoparticles (PDA@Ag NPs) were also introduced into the hydrogel network. The double dynamic bonds endowed the hydrogel with injectable ability, shorter gelation time and enhanced mechanical property. And the aldehyde and catechol groups on the chains of ADA and Gel-Cat gave the hydrogel excellent adhesiveness. In addition, the PDA@Ag NPs in this system play two roles: one is bactericidal agent which can release from the hydrogel to kill the bacteria; the other is photothermal agent to convert 808 nm near-infrared light into heat to realize sterilization. In vitro study, the hydrogel displayed bactericidal ability against S. aureus and E. coli whether in photothermal antimicrobial test or agar diffusion test. In vivo test also testified that the hydrogel had a prominent therapeutic effect on infected wound through reducing inflammatory response and accelerating angiogenesis. Thus, we anticipate that our double dynamic bonds crosslinked hydrogel with PDA@Ag NPs as the antimicrobial agent can be a novel therapeutic way for infected wounds.

The surface modification of long carbon fiber reinforced polyether ether ketone with bioactive composite hydrogel for effective osteogenicity.

Long carbon fiber reinforced polyether ether ketone (LCFRPEEK) is fabricated using a three-dimensional (3D) needle-punched method in our previous work, which is considered as a potential orthopedic implant due to its high mechanical strength and isotropic properties, as well as having an elastic modulus similar to human cortical bone. However, the LCFRPEEK has inferior integration with bone tissue, limiting its clinical application. Thus, a facile surface modification method, using gelatin methacrylate/polyacrylamide composite hydrogel coating (GelMA/PAAM) loading with dexamethasone (Dex) on our newly-developed LCFRPEEK composite via concentrated sulfuric acid sulfonating and ultraviolet (UV) irradiation grafting methods, has been developed to tackle the problem. The results demonstrate that the GelMA/PAAM/Dex coating modified sulfonated LCFRPEEK (SCP/GP/Dex) has a hydrophilicity surface, a long-term Dex release capability and forms more bone-like apatite nodules in SBF. The SCP/GP/Dex also displays enhanced cytocompatibility and osteogenic differentiation in terms of rat bone marrow mesenchymal stem cells (rBMSCs) responses in vitro assay. The in vivo rat cranial defect assay confirms that SCP/GP/Dex boosts bone regeneration/osseointegration, which significantly improves osteogenic fixation between the implant and bone tissue. Therefore, the newly-developed LCFRPEEK modified via GelMA/PAAM/Dex bioactive coating exhibits improved biocompatibility and osteogenic integration capability, which has the basis for an orthopedic implant for clinical application.

A bi-layered scaffold of a poly(lactic-co-glycolic acid) nanofiber mat and an alginate-gelatin hydrogel for wound healing.

A resveratrol-loaded bi-layered scaffold (RBS) that consists of a resveratrol-loaded poly(lactic-co-glycolic acid) (Res-PLGA) electrospinning nanofiber mat (upper layer) and an alginate di-aldehyde (ADA)-gelatin (GEL) crosslinking hydrogel (ADA-GEL) (lower layer) was fabricated as a wound dressing material. It was made through mimicking the epidermis and dermis of the skin. The RBS exhibited good hemostatic ability and proper swelling ability. Furthermore, HaCaT cells and human embryonic skin fibroblasts (ESFs) were also cultured in the nanofiber layer and hydrogel layer of RBS, and the results indicated that both HaCaT and ESFs could grow well in the materials. The in vivo experiment using a Sprague-Dawley (SD) rat skin wound as a model showed that the RBS could accelerate the wound healing rate compared with the Res-PLGA group and ADA4-GEL6 group. These results indicated that this resveratrol-loaded bi-layered scaffold can be a potential candidate in promoting wound healing.

Integrative proteomics-metabolomics strategy reveals the mechanism of hepatotoxicity induced by Fructus Psoraleae.

Fructus Psoraleae (FP), one of the significant traditional Chinese medicines, has been reported to cause hepatotoxicity. However, the mechanism remains undetermined and the reported research is limited. In this study, a tandem mass tag (TMT)-based quantitative proteomics and metabolomics were used to reveal a more comprehensive effect caused by FP. The results showed that aqueous extract of FP can induce liver injury in rats. In total, 575 significantly changed proteins were identified by quantitative proteomics analysis, among which 352 proteins were significantly up-regulated and 223 proteins were significantly down-regulated in liver tissues. And we detected 14 biomarkers such as succinic acid, hypoxanthine, l-carnitine, phenylalanine, glutathione, and glycoursodeoxycholic acid. Correlation analysis of altered metabolites and proteins exhibited the aberrant regulation of metabolic pathways including bile secretion, glutathione metabolism, purine metabolism, glycerophospholipid metabolism, TCA cycle and pyruvate metabolism, which indicated the disorder of bile acid metabolism, oxidative stress, energy metabolism and immune system. Notably, the changed proteins including Cyp7a1, FXR, SHP, BSEP, Sult2a1, Nceh1 in bile acid metabolism may play an essential role in the hepatotoxicity induced by aqueous extract of FP. In conclusion, integrative proteomics and metabolomics provide the potential mechanism of hepatotoxicity induced by FP. SIGNIFICANCE: Fructus Psoraleae, a traditional Chinese medicine, is widely used in Asia for the treatment of osteoporosis and vitiligo. Recently, clinical and experimental reports reveal that FP can induce liver injury. However the mechanism of injury induced by FP is still unclear. In this study, we detected 352 significantly up-regulated proteins and 223 significantly down-regulated proteins in liver tissues by TMT-based quantitative proteomics. And 14 important metabolites were identified by metabolomics analysis. Through integrative analysis of the key metabolites and proteins, several metabolism pathways were selected, which implicated in bile acid metabolism, oxidative stress, energy metabolism, immune system. This is the first integrative study of proteomics and metabolomics for FP exposure, the finding clarified the potential mechanism of hepatotoxicity caused by FP and will promote rational use of FP in clinical application.

Three-Dimensional Coating of SF/PLGA Coaxial Nanofiber Membranes on Surfaces of Calcium Phosphate Cement for Enhanced Bone Regeneration.

Calcium phosphate cements (CPCs) have been widely used for the study of bone regeneration because of their excellent physical and chemical properties, but poor biocompatibility and lack of osteoinductivity limit potential clinical applications. To overcome these limitations, and based on our previous research, CPC scaffolds were prepared with CPC as the principal material and polyethylene glycol (PEG) as a porogen to introduce interconnected macropores. Using a bespoke electrospinning auxiliary receiver, silk fibroin (SF)/poly(lactide-co-glycolide) (PLGA) coaxial nanofibers containing dexamethasone (DXM) and recombinant human bone morphogenetic protein-2 (rhBMP2) were fabricated which were coated on the surface of the CPC. By comparing the surface morphology by SEM, hydrophilicity, results of FTIR spectroscopy, and mechanical properties of the composite materials fabricated using different electrospinning times (20, 40, 60 min), the CPC surface constructed by electrospinning for 40 min was found to exhibit the most appropriate physical and chemical properties. Therefore, composite materials were built for further study by electrospinning for 40 min. The osteogenic capacity of the SF/PLGA/CPC, SF-DXM/PLGA/CPC, and SF-DXM/PLGA-rhBMP2/CPC scaffolds was evaluated by in vitro cell culture with rat bone marrow mesenchymal stem cells (BMSCs) and using a rat cranial defect repair model. ALP activity, calcium deposition levels, upregulation of osteogenic genes, and bone regeneration in skull defects in rats with SF-DXM/PLGA-rhBMP2/CPC implants were significantly higher than in rats implanted with the other scaffolds. These results suggest that drug-loaded coaxial nanofiber coatings prepared on a CPC surface can continuously and effectively release bioactive drugs and further stimulate osteogenesis. Therefore, the SF-DXM/PLGA-rhBMP2/CPC scaffolds prepared in this study demonstrated the most significant potential for the treatment of bone defects.

Research on the hepatotoxicity mechanism of citrate-modified silver nanoparticles based on metabolomics and proteomics.

Citrate-modified silver nanoparticles (AgNP-cit) have received extensive attention due to their excellent antimicrobial properties. However, these particles tend to migrate in vivo, thereby entering the blood circulatory system in granular form and accumulating in the liver, causing toxic reactions. However, the mechanism underlying AgNP-cit toxicity is not yet clear. Thus, we adopted a tandem mass tag (TMT)-labeled quantitative proteomics and metabolomics approach to identify proteins and small molecule metabolites associated with AgNP-cit-induced liver damage and constructed interaction networks between the differentially expressed proteins and metabolites to explain the AgNP-cit toxicity mechanism. AgNP-cit resulted in abnormal purine metabolism mainly by affecting xanthine and other key metabolites along with pyruvate kinase and other bodily proteins, leading to oxidative stress. AgNP-cit regulated the metabolism of amino acids and glycerol phospholipids through glycerol phospholipids, CYP450 enzymes and other key proteins, causing liver inflammation. Via alanine, isoleucine, L-serine dehydratase/L-threonine deaminase and other proteins, AgNP-cit altered the metabolism of glycine, serine and threonine, cysteine and methionine, affecting oxidation and deamination, and ultimately leading to liver damage. This work clearly explains toxic reactions induced by AgNP-cit from three perspectives, oxidative stress, inflammatory response, and oxidation and deamination, thus providing an experimental basis for the safe application of nanomaterials.

Integrated Network Pharmacology and Metabolomics Analysis of the Therapeutic Effects of Zi Dian Fang on Immune Thrombocytopenic Purpura.

Current hormone-based treatments for immune thrombocytopenic purpura (ITP) are associated with potentially serious adverse reactions. Zi Dian Fang (ZDF) is a multi-target Traditional Chinese Medicine (TCM) used to treat both the symptoms and root causes of ITP, with fewer side effects than hormone-based treatments. This study analysis of the therapeutic effects of ZDF on ITP from three aspects: platelet proliferation, immunoregulation, and inflammation. After detection of 52 chemical constituents of ZDF by UPLC-Q-TOF/MS, The main targets and pathways affected by ZDF were screened by network pharmacology and verified by Western blot and ELISA. Meanwhile, metabolomics analysis were applied to a mouse model of ITP to identify and screen endogenous terminal metabolites differentially regulated by ZDF. Integrated network pharmacology and metabolomics analysis of the therapeutic effects of ZDF on ITP may be as follows: ZDF counteracts ITP symptoms mainly by inhibiting Ras/MAPKs (Ras/Mitogen-activated protein kinases) pathway, and the expression of upstream protein (Ras) and downstream protein (p-ERK, p-JNK, p-p38) were inhibited, which affects the content of effect index associated with proliferation (Thrombopoietin, TPO; Granulocyte-macrophage colony stimulating factor, GM-CSF), inflammation (Tumor necrosis factor-α, TNF-α; Interleukin-6, IL-6), immune (Interleukin-2, IL-2; Interferon-gamma, IFN-γ; Interleukin-4, IL-4), so that the body's arginine, Δ12-prostaglandin j2 (Δ12-PGJ2), 9-cis-Retinoic Acid, sphingosine-1-phosphate (S1P), oleic acid amide and other 12 endogenous metabolites significantly changes. Considering the established safety profile, the present study suggests ZDF may be a useful alternative to hormone-based therapies for the treatment of ITP.

Determination of protein in milk powder using 2-sulfophenylazo-rhodanine as a probe by the enhanced resonance Rayleigh light-scattering technique.

In this paper, the interaction between 2-sulfophenylazo-rhodanine and protein was investigated by Rayleigh light-scattering technique. Based on this, a novel method for the determination of protein was developed. The effects of different conditions, such as acidity and media, were investigated thoroughly, and the optimum conditions were confirmed. Bis(2-ethylhexyl)sulfosuccinate (AOT) microemulsion, which is introduced into the protein determination, markedly increased the sensitivity of the system by changing the microenvironment. In pH 2.80 Britton-Robinson buffer solution in the presence of AOT microemulsion, the detection limits of bovine serum albumin, human serum albumin, ovalbumin, and gamma-globulin are 5.4, 4.5, 9.8, and 10.1 ng/mL, respectively. The method developed in this paper has been applied to the determination of protein in milk powder with satisfactory results.

Synthesis of thermo-responsive polymers recycling aqueous two-phase systems and phase formation mechanism with partition of ε-polylysine.

Aqueous two-phase systems (ATPS) have the potential application in bioseparation and biocatalysis engineering. In this paper, a recyclable ATPS was developed by two thermo-responsive copolymers, PVBAm and PN. Copolymer PVBAm was copolymerized using N-vinylcaprolactam, Butyl methacrylate and Acrylamide as monomers, and PN was synthesized by N-isopropylacrylamide. The lower critical solution temperature (LCST) of PVBAm and PN were 45.0°C and 33.5°C, respectively. The recoveries of both polymers could achieve over 95.0%. The phase behavior and formation mechanism of PVBAm/PN ATPS was studied. Low-field nuclear magnetic resonance (LF-NMR) was applied in the phase-forming mechanism study in ATPS. In addition, combining the analysis results of surface tension, transmission electron microscopy and dynamic light scattering, the phase-forming of the PVBAm/PN ATPS was proved. The application was performed by partition of ε-polylysine in the 2% PVBAm/2% PN (w/w) ATPS. The results demonstrated that ε-polylysine was extracted into the PN-rich phase, the maximal partition coefficient (1/K) and extraction recovery of pure ε-polylysine were 6.87 and 96.36%, respectively, and 7.41 partition coefficient and 97.85% extraction recovery for ε-polylysine fermentation broth were obtained in the presence of 50mM (NH4)2SO4 at room temperature. And this method can effectively remove the most impurities from fermentation broth when (NH4)2SO4 exists in the ATPS. It is believed that the thermo-responsive recycling ATPS has a good application prospect in the field of bio-separation.