Fullertubes: A 30-Year Story of Prediction, Experimental Validation, and Applications for a Long-Missing Family of Soluble Carbon Molecules.

ConspectusDuring the last 30 years, theoretical scientists imagined segmental families of monolayer carbon tubules with fullerene-based end-caps. These fullertube molecules would possess structural features of both fullerenes (hemispherical end-caps) and tubular belts of single-walled carbon nanotubes (SWCNTs). Yet, their experimental verification remained elusive for decades. It was not until 2020-2023 that segmental families of fullertubes were finally confirmed in the lab. The shocking irony is that these fullertubes were unwittingly coproduced alongside fullerenes (e.g., C60, C70, C84) in both flame and electric arc soot since the 1990s. Yet, nobody knew these "hidden" families of fullertubes were experimentally present in their extracted soot due to their low abundance and the absence of isolation methodology.This eruption of fullertube discoveries in 2020-2023 was brought to fruition by structural data, both DFT and experimental. This "Treasure Trove" of new molecules during this four-year window occurred with only microgram quantities. Typically, milligram levels of purified samples are required for X-ray crystallography and 13C NMR structural analysis. The breakthrough for experimentally verifying the missing fullertubes was an aminopropanol reagent to selectively react with and remove spheroidal carbon (e.g., C60, C70, C84) as hydrophilic derivatives. In contrast, there was suppressed reaction with fullertubes, which remained in organic solvent. It is well established that high symmetry (3-, 5-, and 6-fold) hemispheres for C60-Ih and other fullerenes and metallofullerenes are prerequisite end-caps for fullertubes. For the case of [5,5] C130 fullertubes, this requirement results in only eight 3-, 5-, and 6-fold symmetry structural isomers possible from a total of 39,393 possible isolated pentagon rule (IPR) isomers. From this C130 list of 8 candidate isolated pentagon rule (IPR) high symmetry isomers, surprisingly only one structure matched the DFT polarizability versus chromatographic retention parameter (a new gold standard for isomer identification). The simultaneous emergence of DFT computations of other properties (e.g., total energy, HOMO-LUMO gap, UV-vis) for large carbon molecules provided support for structural determination. Experimental approaches (e.g., mass spectrometry, UV-vis, XPS, Raman, and STEM) provided additional layers of structural elucidation at the microgram level. For the first time, we developed a chemical isolation protocol that would allow the preparation and isolation of soluble pristine fullertubes in the range of C90-C200. To date, applications of SWCNTs for use in nanoscale computer applications requires purities greater than 99.999%. Although this stringent mandate has not yet been demonstrated using SWCNT samples, this high level of purity appears achievable for metallic [5,5] D5d-C120 and semiconductor [10,0] D5h-C120 [10,766] fullertubes. Moreover, commercial production of pristine fullertubes should easily be feasible by the flame method due to its continuous operation and inexpensive feedstock. For application development, theoretical and electrochemical experimental data show that fullertubes exhibit high catalytic activity in oxygen reduction reactions. In the medical sector, pristine fullertube dispersions exhibit antimicrobial effects on Mycobacterium smegmatis and M. abscessus.

Colossal C130 Fullertubes: Soluble [5,5] C130-D5h(1) Pristine Molecules with 70 Nanotube Carbons and Two 30-Atom Hemifullerene End-caps.

We report the seminal experimental isolation and DFT characterization of pristine [5,5] C130-D5h(1) fullertubes. This achievement represents the largest soluble carbon molecule obtained in its pristine form. The [5,5] C130 species is the highest aspect ratio fullertube purified to date and now surpasses the recent gigantic [5,5] C120-D5d(1). In contrast to C90, C100, and C120 fullertubes, the longer C130-D5h has more nanotubular carbons (70) than end-cap fullerenyl atoms (60). Starting from 39,393 possible C130 isolated pentagon rule (IPR) structures and after analyzing polarizability, retention time, and UV-vis spectra, these three layers of data remarkably predict a single candidate isomer and fullertube, [5,5] C130-D5h(1). This structural assignment is augmented by atomic resolution STEM data showing distinctive and tubular "pill-like" structures with diameters and aspect ratios consistent with [5,5] C130-D5h(1) fullertubes. The high selectivity of the aminopropanol reaction with spheroidal fullerenes permits facile separation and removal of fullertubes from soot extracts. Experimental analyses (HPLC retention time, UV-vis, and STEM) were synergistically used (with polarizability and DFT property calculations) to down select and confirm the C130 fullertube structure. Achieving the isolation of a new [5,5] C130-D5h fullertube opens the door to application development and fundamental studies of electron confinement, fluorescence, and metallic character for a fullertube series of molecules with systematic tubular elongation. This [5,5] fullertube family also invites comparative studies with single-walled carbon nanotubes (SWCNTs), nanohorns (SWCNHs), and fullerenes.

Tb2O@C2(13333)-C74: A Non-Isolated Pentagon Endohedral Fullerene Containing a Nearly Linear Tb-O-Tb Unit.

Terbium has been added to the list of elements that form oxide clusters inside fullerene cages. Tb2O@C2(13333)-C74 has been isolated as a byproduct of the electric arc synthesis of the azafullerene Tb2@C79N. Cocrystallization of Tb2O@C2(13333)-C74 with Ni(OEP) (where OEP is the dianion of octaethylporphyrin) in toluene yielded black needles of Tb2O@C2(13333)-C74·NiII(OEP)·1.5C7H8 that have been examined by single-crystal X-ray diffraction. The resulting structure shows that a nearly linear Tb-O-Tb unit is contained in a C2(13333)-C74, which has two sites where pentagons share an edge to form pentalene units at opposite ends of the fullerene. Unlike the usual situations where metal atoms in fullerenes that do not obey the isolated pentagon rule are situated within the folds of the pentalene units, the Tb atoms in Tb2O@C2(13333)-C74 are positioned to the side of the pentalene units and near-neighboring hexagons. The magnetic properties of Tb2O@C2(13333)-C74 have been examined starting from the experimental geometry, using ab-initio multiconfigurational methods. The computations predict that Tb2O@C2(13333)-C74 will show strong axiality, which would make it a single-molecule magnet with a large magnetic anisotropy barrier.

Gigantic C120 Fullertubes: Prediction and Experimental Evidence for Isomerically Purified Metallic [5,5] C120-D5d(1) and Nonmetallic [10,0] C120-D5h(10766).

We report the first experimental characterization of isomerically pure and pristine C120 fullertubes, [5,5] C120-D5d(1) and [10,0] C120-D5h(10766). These new molecules represent the highest aspect ratio fullertubes isolated to date; for example, the prior largest empty cage fullertube was [5,5] C100-D5d(1). This increase of 20 carbon atoms represents a gigantic leap in comparison to three decades of C60-C90 fullerene research. Moreover, the [10,0] C120-D5d(10766) fullertube has an end-cap derived from C80-Ih and is a new fullertube whose C40 end-cap has not yet been isolated experimentally. Theoretical and experimental analyses of anisotropic polarizability and UV-vis assign C120 isomer I as a [5,5] C120-D5d(1) fullertube. C120 isomer II matches a [10,0] C120-D5h(10766) fullertube. These structural assignments are further supported by Raman data showing metallic character for [5,5] C120-D5d(1) and nonmetallic character for C120-D5h(10766). STM imaging reveals a tubular structure with an aspect ratio consistent with a [5,5] C120-D5d(1) fullertube. With microgram quantities not amenable to crystallography, we demonstrate that DFT anisotropic polarizability, augmented by long-accepted experimental analyses (HPLC retention time, UV-vis, Raman, and STM) can be synergistically used (with DFT) to down select, predict, and assign C120 fullertube candidate structures. From 10 774 mathematically possible IPR C120 structures, this anisotropic polarizability paradigm is quite favorable to distinguish tubular structures from carbon soot. Identification of isomers I and II was surprisingly facile, i.e., two purified isomers for two possible structures of widely distinguishing features. These metallic and nonmetallic C120 fullertube isomers open the door to both fundamental research and application development.

Semiconducting and Metallic [5,5] Fullertube Nanowires: Characterization of Pristine D5h(1)-C90 and D5d(1)-C100.

Although fullerenes were discovered nearly 35 years ago, scientists still struggle to isolate "single molecule" tubular fullerenes larger than C90. In similar fashion, there is a paucity of reports for pristine single-walled carbon nanotubes (SWNTs). In spite of Herculean efforts, the isolation and properties of pristine members of these carbonaceous classes remain largely unfulfilled. For example, the low abundance of spherical and tubular higher fullerenes in electric-arc extracts (<0.01-0.5%) and multiplicity of structural isomers remain a major challenge. Recently, a new isolation protocol for highly tubular fullerenes, also called f ullertubes, was reported. Herein, we describe spectroscopic characterization including 13C NMR, XPS, and Raman results for purified [5,5] fullertube family members, D5h-C90 and D5d-C100. In addition, DFT computational HOMO-LUMO gaps, polarizability indices, and electron density maps were also obtained. The Raman and 13C NMR results are consistent with semiconducting and metallic properties for D5h-C90 and D5d-C100, respectively. Our report suggests that short [5,5] fullertubes with aspect ratios of only ∼1.5-2 are metallic and could exhibit unique electronic properties.

Isolation and Crystallographic Characterization of Two, Nonisolated Pentagon Endohedral Fullerenes: Ho3 N@C2 (22010)-C78 and Tb3 N@C2 (22010)-C78.

Purified samples of Ho3 N@C2 (22010)-C78 and Tb3 N@C2 (22010)-C78 have been isolated by two distinct processes from the rich array of fullerenes and endohedral fullerenes present in carbon soot from graphite rods doped with Ho2 O3 or Tb4 O7 . Crystallographic analysis of the endohedral fullerenes as cocrystals with Ni(OEP) (in which OEP is the dianion of octaethylporphyrin) shows that both molecules contain the chiral C2 (22010)-C78 cage. This cage does not obey the isolated pentagon rule (IPR) but has two sites where two pentagons share a common C-C bond. These pentalene units bind two of the metal ions, whereas the third metal resides near a hexagon of the cage. Inside the cages, the Ho3 N or Tb3 N unit is planar. Ho3 N@C2 (22010)-C78 and Tb3 N@C2 (22010)-C78 use the same cage previously found for Gd3 N@C2 (22010)-C78 rather than the IPR-obeying cage found in Sc3 N@D3h -C78 .

High Blocking Temperature of Magnetization and Giant Coercivity in the Azafullerene Tb2 @C79 N with a Single-Electron Terbium-Terbium Bond.

The azafullerene Tb2 @C79 N is found to be a single-molecule magnet with a high 100-s blocking temperature of magnetization of 24 K and large coercivity. Tb magnetic moments with an easy-axis single-ion magnetic anisotropy are strongly coupled by the unpaired spin of the single-electron Tb-Tb bond. Relaxation of magnetization in Tb2 @C79 N below 15 K proceeds via quantum tunneling of magnetization with the characteristic time τQTM =16 462±1230 s. At higher temperature, relaxation follows the Orbach mechanism with a barrier of 757±4 K, corresponding to the excited states, in which one of the Tb spins is flipped.

Biomedical Applications of Metal-Encapsulated Fullerene Nanoparticles.

The carbonaceous nanomaterials known as metallofullerenes have attracted considerable attention due to their attractive properties. The robust nature of the "Trojan Horse" fullerene cage provides an important structural component, which isolates the metal cluster from the bioenvironment. The large carbon surface area is ideally suited for multiple exo-functionalization approaches to modify the hydrophobic cage for a more hydrophilic bioenvironment. Additionally, peptides and other agents are readily covalently attached to this nanoprobe for targeting applications. The recent progress in developing metallofullerenes for next-generation biomedical applications is described. Of special interest are magnetic resonance imaging (MRI) contrast agents. Several recent studies reported cumulative gadolinium deposition in the brain and bones of individuals using commercial clinical MRI contrast agents. Gadolinium-based metallofullerenes provide 2-3 orders of magnitude improvement in MRI relaxivity and potentially lower clinical levels of toxic Gd3+ ions deposited. Other potential biomedical applications are also reviewed herein.

Detecting Chronic Post-Traumatic Osteomyelitis of Mouse Tibia via an IL-13Rα2 Targeted Metallofullerene Magnetic Resonance Imaging Probe.

Differential diagnosis of chronic post-traumatic osteomyelitis (CPO) from aseptic inflammation remains challenging, since both pathological processes share similar clinical symptoms. Here we utilized a novel targeted metallofullerene nanoparticle based magnetic resonance imaging (MRI) probe IL-13-TAMRA-Gd3N@C80(OH)30(CH2CH2COOH)20 to detect CPO in mouse tibia via overexpressed IL-13Rα2 receptors. The functionalized metallofullerene was characterized by X-ray photoelectron spectroscopy. Upon lipopolysaccharide (LPS) stimulation, macrophage Raw 264.7 cells showed elevated IL-13Rα2 expression via immunofluorescence staining and increased MRI probe binding via built-in TAMRA fluorescence imaging. Trauma was induced in both tibia of mice and bacteria soaked suture was inserted into the right tibia to initiate infection. During the acute phase (1.5 weeks), luminol-bioluminescence imaging revealed much higher myeloperoxidase activity in the infected tibia compared to the sham. In the chronic phase (4 weeks), X-ray radiography illustrated bone deformation in the infected tibia compared to the sham. With T1 weighted sequences, the probe clearly exhibited hyperintensity in the infection foci at both acute and chronic phases, which was not observed in the sham tibia. Histological analysis revealed severe bone structural destruction and massive inflammatory cell infiltration in the infected tibia. Immunohistochemistry confirmed abundant expression of IL-13Rα2 in the infection site. In summary, we developed a noninvasive imaging approach to detect and differentiate CPO from aseptic inflammation using a new IL-13Rα2 targeted metallofullerene MRI probe. In addition, for the first time, IL-13Rα2 was investigated as a unique biomarker in the context of osteomyelitis. Our data established a foundation for the translational application of this MRI probe in the clinical differentiation of CPO.

A New Interleukin-13 Amino-Coated Gadolinium Metallofullerene Nanoparticle for Targeted MRI Detection of Glioblastoma Tumor Cells.

The development of new nanoparticles as next-generation diagnostic and therapeutic ("theranostic") drug platforms is an active area of both chemistry and cancer research. Although numerous gadolinium (Gd) containing metallofullerenes as diagnostic magnetic resonance imaging (MRI) contrast agents have been reported, the metallofullerene cage surface, in most cases, consists of negatively charged carboxyl or hydroxyl groups that limit attractive forces with the cellular surface. It has been reported that nanoparticles with a positive charge will bind more efficiently to negatively charged phospholipid bilayer cellular surfaces, and will more readily undergo endocytosis. In this paper, we report the preparation of a new functionalized trimetallic nitride template endohedral metallofullerene (TNT EMF), Gd3N@C80(OH)x(NH2)y, with a cage surface bearing positively charged amino groups (-NH3(+)) and directly compare it with a similar carboxyl and hydroxyl functionalized derivative. This new nanoparticle was characterized by X-ray photoelectron spectroscopy (XPS), dynamic light scattering (DLS), and infrared spectroscopy. It exhibits excellent (1)H MR relaxivity. Previous studies have clearly demonstrated that the cytokine interleukin-13 (IL-13) effectively targets glioblastoma multiforme (GBM) cells, which are known to overexpress IL-13Rα2. We also report that this amino-coated Gd-nanoplatform, when subsequently conjugated with interleukin-13 peptide IL-13-Gd3N@C80(OH)x(NH2)y, exhibits enhanced targeting of U-251 GBM cell lines and can be effectively delivered intravenously in an orthotopic GBM mouse model.

Gd3N@C84(OH)x: a new egg-shaped metallofullerene magnetic resonance imaging contrast agent.

Water-soluble derivatives of gadolinium-containing metallofullerenes have been considered to be excellent candidates for new magnetic resonance imaging (MRI) contrast agents because of their high relaxivity and characteristic encapsulation of the lanthanide ions (Gd(3+)), preventing their release into the bioenvironment. The trimetallic nitride template endohedral metallofullerenes (TNT EMFs) have further advantages of high stability, high relative yield, and encapsulation of three Gd(3+) ions per molecule as illustrated by the previously reported nearly spherical, Gd3N@I(h)-C80. In this study, we report the preparation and functionalization of a lower-symmetry EMF, Gd3N@C(s)-C84, with a pentalene (fused pentagons) motif and an egg-shaped structure. The Gd3N@C84 derivative exhibits a higher (1)H MR relaxivity compared to that of the Gd3N@C80 derivative synthesized the same way, at low (0.47 T), medium (1.4 T), and high (9.4 T) magnetic fields. The Gd3N@C(s)-C84 derivative exhibits a higher hydroxyl content and aggregate size, as confirmed by X-ray photoelectron spectroscopy (XPS) and dynamic light scattering (DLS) experiments, which could be the main reasons for the higher relaxivity.

Trimetallic nitride template endohedral metallofullerenes: discovery, structural characterization, reactivity, and applications.

Shortly after the discovery of the carbon fullerene allotrope, C60, researchers recognized that the hollow spheroidal shape could accommodate metal atoms, or clusters, which quickly led to the discovery of endohedral metallofullerenes (EMFs). In the past 2 decades, the unique features of EMFs have attracted broad interest in many fields, including inorganic chemistry, organic chemistry, materials chemistry, and biomedical chemistry. Some EMFs produce new metallic clusters that do not exist outside of a fullerene cage, and some other EMFs can boost the efficiency of magnetic resonance (MR) imaging 10-50-fold, in comparison with commercial contrast agents. In 1999, the Dorn laboratory discovered the trimetallic nitride template (TNT) EMFs, which consist of a trimetallic nitride cluster and a host fullerene cage. The TNT-EMFs (A3N@C2n, n = 34-55, A = Sc, Y, or lanthanides) are typically formed in relatively high yields (sometimes only exceeded by empty-cage C60 and C70, but yields may decrease with increasing TNT cluster size), and exhibit high chemical and thermal stability. In this Account, we give an overview of TNT-EMF research, starting with the discovery of these structures and then describing their synthesis and applications. First, we describe our serendipitous discovery of the first member of this class, Sc3N@Ih-C80. Second, we discuss the methodology for the synthesis of several TNT-EMFs. These results emphasize the importance of chemically adjusting plasma temperature, energy, and reactivity (CAPTEAR) to optimize the type and yield of TNT-EMFs produced. Third, we review the approaches that are used to separate and purify pristine TNT-EMF molecules from their corresponding product mixtures. Although we used high-performance liquid chromatography (HPLC) to separate TNT-EMFs in early studies, we have more recently achieved facile separation based on the reduced chemical reactivity of the TNT-EMFs. These improved production yields and separation protocols have allowed industrial researchers to scale up the production of TNT-EMFs for commercial use. Fourth, we summarize the structural features of individual members of the TNT-EMF class, including cage structures, cluster arrangement, and dynamics. Fifth, we illustrate typical functionalization reactions of the TNT-EMFs, particularly cycloadditions and radical reactions, and describe the characterization of their derivatives. Finally, we illustrate the unique magnetic and electronic properties of specific TNT-EMFs for biomedicine and molecular device applications.

Enhanced dipole moments in trimetallic nitride template endohedral metallofullerenes with the pentalene motif.

Although not found to date in empty-cage fullerenes, the fused pentagon motifs (pentalenes) are allowed in endohedral metallofullerenes (EMFs). We have found that members of the trimetallic nitride template (TNT) EMF Y3N@C2n (n = 39-44) family that contain pentalene motifs exhibit significant dipole moments. This finding is predicted to be significant for other EMFs with a metal atom orientated toward the pentalene motif. Chromatographic retention data and computational results for Y3N@C2-C78, Y3N@Cs-C82, and Y3N@Cs-C84 are examples that pentalene groups lead to a significant induced dipole moment (∼1D). A special case is the Y3N@C2-C78 that contains two pentalenes in a relatively small cage. The (13)C NMR spectrum for Y3N@C2-C78 exhibits strongly deshielded signals for the fullerene cage (155-170 ppm) supporting the presence of the pentalene motif. In addition, a lengthening of the covalent M-N bond in the internal M3N cluster is found for all reported TNT EMFs that contain one or two pentalene motifs.

Water-soluble endohedral metallofullerenes: new horizons for biomedical applications.

Endohedral metallofullerenes (EMFs) offer a safe avenue to manipulate metals important to biomedical applications such as MRI contrast, X-ray contrast, radiolabeling, radiotherapy, chemotherapy, and the control of inflammation by scavenging reactive oxygen species (ROS). Moreover, functionalizing the double bonds on the surface of EMFs modifies their solubility, supramolecular behaviour, binding, targeting characteristics, and physical properties. While most existing water-soluble derivatives possess a statistical mixture of appended functional groups, progress has been made in creating molecularly-precise derivatives with a defined number of surface functional groups, leading to potentially more nuanced control of their behaviour and properties. Further elucidation of the structure-function relationships of these materials is expected to enhance their utility in biomedical applications and possibly broaden their use in diverse areas of science and technology.

Nanoscale fullerene compression of an yttrium carbide cluster.

The nanoscale parameters of metal clusters and lattices have a crucial influence on the macroscopic properties of materials. Herein, we provide a detailed study on the size and shape of isolated yttrium carbide clusters in different fullerene cages. A family of diyttrium endohedral metallofullerenes with the general formula of Y(2)C(2n) (n = 40-59) are reported. The high field (13)C nuclear magnetic resonance (NMR) and density functional theory (DFT) methods are employed to examine this yttrium carbide cluster in certain family members, Y(2)C(2)@D(5)(450)-C(100), Y(2)C(2)@D(3)(85)-C(92), Y(2)C(2)@C(84), Y(2)C(2)@C(3v)(8)-C(82), and Y(2)C(2)@C(s)(6)-C(82). The results of this study suggest that decreasing the size of a fullerene cage with the same (Y(2)C(2))(4+) cluster results in nanoscale fullerene compression (NFC) from a nearly linear stretched geometry to a constrained "butterfly" structure. The (13)C NMR chemical shift and scalar (1)J(YC) coupling parameters provide a very sensitive measure of this NFC effect for the (Y(2)C(2))(4+) cluster. The crystal structural parameters of a previously reported metal carbide, Y(2)C(3) are directly compared to the (Y(2)C(2))(4+) cluster in the current metallofullerene study.

Metallofullerene-nanoplatform-delivered interstitial brachytherapy improved survival in a murine model of glioblastoma multiforme.

Fullerenes are used across scientific disciplines because of their diverse properties gained by altering encapsulated or surface-bound components. In this study, the recently developed theranostic agent based on a radiolabeled functionalized metallofullerene ((177)Lu-DOTA-f-Gd(3)N@C(80)) was synthesized with high radiochemical yield and purity. The efficacy of this agent was demonstrated in two orthotopic xenograft brain tumor models of glioblastoma multiforme (GBM). A dose-dependent improvement in survival was also shown. The in vivo stability of the agent was verified through dual label measurements of biological elimination from the tumor. Overall, these results provide evidence that nanomaterial platforms can be used to deliver effective interstitial brachytherapy.

Amine Functionalized Trimetallic Nitride Endohedral Fullerenes: A Class of Nanoparticle to Tackle Low Back/Leg Pain.

Low back pain is the most common health problem with a prevalence of over 80% worldwide and an estimated annual cost of $100 billion in the United States. Intervertebral disc degeneration accounts for a major cause of low back pain. However, there is still a lack of safe and effective treatment to tackle this devastating condition. In this study, we synthesized four functionalized trimetallic nitride endohedral metallofullerenes (carboxyl-f-Sc3N@C80, carboxyl-f-Gd3N@C80, amino-f-Sc3N@C80, and amino-f-Gd3N@C80) and characterized them with X-ray photoelectron spectroscopy, matrix-assisted laser desorption/ionization-time of flight mass spectrometry, and UV-vis. Via electron paramagnetic resonance, all four metallofullerene derivatives possessed dose-dependent radical scavenging capabilities (hydroxyl radicals and superoxide anions), with the most promising radical scavenging properties shown in the amine functionalized C80 metallofullerenes. Both amino-f-Sc3N@C80 and amino-f-Gd3N@C80 at 1 µM significantly reduced lipopolysaccharide induced reactive oxygen species production and mRNA expressions of pro-inflammatory mediators (inos, tnf-α, il-1, and cox-2) in macrophages without apparent cytotoxicity through regulating activity of p38 MAPK, p65, and nuclear translocation of NF-κB. Furthermore, in an established mouse model of lumbar radiculopathy, amino-f-Sc3N@C80 and amino-f-Gd3N@C80 effectively alleviated ipsilateral mechanical hyperalgesia for up to 2 weeks. In dorsal root ganglia explant culture, we also showed that amino-f-Sc3N@C80 and amino-f-Gd3N@C80 ameliorated TNF-α elicited neuroinflammation. In summary, we presented results for a potent radical scavenging, anti-inflammatory and analgesic nanoparticle, amino-functionalized eighty-carbon metallofullerenes in vitro and in vivo. Our study provides important assets for developing pleiotropic treatment strategies to tackle the inflammation, a significant pathological hallmark in the intervertebral disc degeneration and associated pain.

Gd2@C79N: isolation, characterization, and monoadduct formation of a very stable heterofullerene with a magnetic spin state of S = 15/2.

The dimetallic endohedral heterofullerene (EHF), Gd(2)@C(79)N, was prepared and isolated in a relatively high yield when compared with the earlier reported heterofullerene, Y(2)@C(79)N. Computational (DFT), chemical reactivity, Raman, and electrochemical studies all suggest that the purified Gd(2)@C(79)N, with the heterofullerene cage, (C(79)N)(5-) has comparable stability with other better known isoelectronic metallofullerene (C(80))(6-) cage species (e.g., Gd(3)N@C(80)). These results describe an exceptionally stable paramagnetic molecule with low chemical reactivity with the unpaired electron spin density localized on the internal diatomic gadolinium cluster and not on the heterofullerene cage. EPR studies confirm that the spin state of Gd(2)@C(79)N is characterized by a half-integer spin quantum number of S = 15/2. The spin (S = ½) on the N atom of the fullerene cage and two octet spins (S = 7/2) of two encapsulated gadoliniums are coupled with each other in a ferromagnetic manner with a small zero-field splitting parameter D. Because the central line of Gd(2)@C(79)N is due to the Kramer's doublet with a half-integer spin quantum number of S = 15/2, this relatively sharp line is prominent and the anisotropic nature of the line is weak. Interestingly, in contrast with most Gd(3+) ion environments, the central EPR line (g = 1.978) is observable even at room temperature in a toluene solution. Finally, we report the first EHF derivative, a diethyl bromomalonate monoadduct of Gd(2)@C(79)N, which was prepared and isolated via a modified Bingel-Hirsch reaction.

Metallofullerene-based nanoplatform for brain tumor brachytherapy and longitudinal imaging in a murine orthotopic xenograft model.

PURPOSE: To demonstrate in an orthotopic xenograft brain tumor model that a functionalized metallofullerene (f-Gd3N@C80) can enable longitudinal tumor imaging and, when radiolabeled with lutetium 177 (¹77Lu) and tetraazacyclododecane tetraacetic acid (DOTA) (¹77Lu-DOTA-f-Gd3N@C80), provide an anchor to deliver effective brachytherapy. MATERIALS AND METHODS: All experiments involving the use of mice were carried out in accordance with protocols approved by the institutional animal care and use committee. Human glioblastoma U87MG cells were implanted by using stereotactic procedures into the brains of 37 female athymic nude-Foxn1nu mice and allowed to develop into a tumor for 8 days. T1- and T2-weighted magnetic resonance (MR) imaging was performed in five mice. Biodistribution studies were performed in 12 mice at four time points over 7 days to evaluate gadolinium content. Survival studies involved 20 mice that received infusion of a nanoplatform by means of convection-enhanced delivery (CED) 8 days after tumor implantation. Mice in survival studies were divided into two groups: one comprised untreated mice that received f-Gd3N@CC80 alone and the other comprised mice treated with brachytherapy that received 1.11 MBq of ¹77Lu-DOTA-f-Gd3N@CC80. Survival data were evaluated by using Kaplan-Meier statistical methods. RESULTS: MR imaging showed extended tumor retention (25.6% ± 1.2 of the infused dose at 52 days, confirmed with biodistribution studies) of the f-Gd3N@CC80 nanoplatform, which enabled longitudinal imaging. Successful coupling of ¹77Lu to the f-Gd3N@CC80 surface was achieved by using a bifunctional macrocyclic chelator. The extended tumor retention allowed for effective brachytherapy, as indicated by extended survival time (> 2.5 times that of the untreated group) and histologic signs of radiation-induced tumor damage. CONCLUSION: The authors have developed a multimodal nanoplatform and have demonstrated longitudinal tumor imaging, prolonged intratumoral probe retention, biodistribution, and extended survival in an orthotopic xenograft brain tumor model.