Atomically Precise Single-Site Catalysts via Exsolution in a Polyoxometalate-Metal-Organic-Framework Architecture.

Single-site catalysts (SSCs) achieve a high catalytic performance through atomically dispersed active sites. A challenge facing the development of SSCs is aggregation of active catalytic species. Reducing the loading of these sites to very low levels is a common strategy to mitigate aggregation and sintering; however, this limits the tools that can be used to characterize the SSCs. Here we report a sintering-resistant SSC with high loading that is achieved by incorporating Anderson-Evans polyoxometalate clusters (POMs, MMo6O24, M = Rh/Pt) within NU-1000, a Zr-based metal-organic framework (MOF). The dual confinement provided by isolating the active site within the POM, then isolating the POMs within the MOF, facilitates the formation of isolated noble metal sites with low coordination numbers via exsolution from the POM during activation. The high loading (up to 3.2 wt %) that can be achieved without sintering allowed the local structure transformation in the POM cluster and the surrounding MOF to be evaluated using in situ X-ray scattering with pair distribution function (PDF) analysis. Notably, the Rh/Pt···Mo distance in the active catalyst is shorter than the M···M bond lengths in the respective bulk metals. Models of the active cluster structure were identified based on the PDF data with complementary computation and X-ray absorption spectroscopy analysis.

Electrochemiluminescence of Ultrasmall Silica Nanoparticles from Size Modulation and Multipath Surface State Adjustment for Ultrasensitive HIV-DNA Fragment Detection.

Here, ultrasmall SiO2 nanoparticles (u-SiO2 NPs, <5 nm) with obvious electrochemiluminescence (ECL) phenomenon, which was absent for conventional silica nanoparticles (c-SiO2 NPs), were reported. In a finite ultrasmall volume, the u-SiO2 NPs exhibited increasing ground state energy and higher optical absorption strength due to the electron-hole confinement model and favored catalyzing the reaction through the rapid diffusion of bulk charge, resulting in apparent ECL emission. Then, Zn2+-induced u-SiO2 nanoaggregates (Zn/u-SiO2-Ov nAGG) were synthesized and exhibited improved ECL performance via multipath surface state adjustment of u-SiO2 from several aspects, including aggregation-induced ECL, the generation of oxygen vacancy (Ov), and more positive surface charge. In addition, an ECL biosensor was constructed for ultrasensitive human immunodeficiency virus-related deoxyribonucleic acid detection from 100 aM to 1 nM with a low limit of 50.48 aM, combining the ECL luminescence of Zn/u-SiO2-Ov nAGG with three-dimensional DNA nanomachine-mediated multioutput amplification for enhanced accuracy and sensitivity compared to the single-output method. Therefore, exploring the ECL of ultrasmall nanoparticles via the adjustment of size and surface state provided a valuable indication to a wider investigation and application of novel ECL materials for clinical diagnostic.

Diquat causes mouse testis injury through inducing heme oxygenase-1-mediated ferroptosis in spermatogonia.

Diquat dibromide (DQ) is a globally used herbicide in agriculture, and its overuse poses an important public health issue, including male reproductive toxicity in mammals. However, the effects and molecular mechanisms of DQ on testes are limited. In vivo experiments, mice were intraperitoneally injected with 8 or 10 mg/kg/ day of DQ for 28 days. It has been found that heme oxygenase-1 (HO-1) mediates DQ-induced ferroptosis in mouse spermatogonia, thereby damaging testicular development and spermatogenesis. Histopathologically, we found that DQ exposure caused seminiferous tubule disorders, reduced germ cells, and increased sperm malformation, in mice. Reactive oxygen species (ROS) staining of frozen section and transmission electron microscopy (TEM) displayed DQ promoted ROS generation and mitochondrial morphology alterations in mouse testes, suggesting that DQ treatment induced testicular oxidative stress. Subsequent RNA-sequencing further showed that DQ treatment might trigger ferroptosis pathway, attributed to disturbed glutathione metabolism and iron homeostasis in spermatogonia cells in vitro. Consistently, results of western blotting, measurements of MDA and ferrous iron, and ROS staining confirmed that DQ increased oxidative stress and lipid peroxidation, and accelerated ferrous iron accumulation both in vitro and in vivo. Moreover, inhibition of ferroptosis by deferoxamine (DFO) markedly ameliorated DQ-induced cell death and dysfunction. By RNA-sequencing, we found that the expression of HO-1 was significantly upregulated in DQ-treated spermatogonia, while ZnPP (a specific inhibitor of HO-1) blocked spermatogonia ferroptosis by balancing intracellular iron homeostasis. In mice, administration of the ferroptosis inhibitor ferrostatin-1 effectively restored the increase of HO-1 levels in the spermatogonia, prevented spermatogonia death, and alleviated the spermatogenesis disorders induced by DQ. Overall, these findings suggest that HO-1 mediates DQ-induced spermatogonia ferroptosis in mouse testes, and targeting HO-1 may be an effective protective strategy against male reproductive disorders induced by pesticides in agriculture.

Isomer of NU-1000 with a Blocking c-pore Exhibits High Water-Vapor Uptake Capacity and Greatly Enhanced Cycle Stability.

Chemically and hydrolytically stable metal-organic frameworks (MOFs) have shown great potential for many water-adsorption-related applications. However, MOFs with large pores that show high water-uptake capacity and high hydrolytic and mechanical cycle stability are rare. Through a deliberate adjustment of the linker of a typical zirconium-based MOF (Zr-MOF) (NU-1000), a new isomer of NU-1000 with blocked c-pores, but large mesopores was successfully synthesized. This new isomer, ISO-NU-1000, exhibits excellent water stability, one of the highest water vapor uptake capacities, and excellent cycle stability, making it a promising candidate for water-vapor-sorption-based applications such as water-adsorption-driven heat transfer. We find that the high water-cycling stability of ISO-NU-1000 is traceable to its blocking c-pore that hinders the hydrolysis of node-coordinating formate in the c-pore area and thereby prevents the introduction of node aqua and terminal hydroxo ligands. With the absence of these ligands and their ability to hydrogen-bond to channel-located water molecules, the strength of guest (water)/host (MOF) interactions is diminished and the absolute magnitude of the capillary force exerted by water during its evacuation from MOF channels is attenuated. The attenuation leaves the MOF capable of resisting pore collapse, capacity loss, and crystallinity loss during repetitive evaporative removal (and re-introduction) of water from pores.

Framework-Topology-Controlled Singlet Fission in Metal-Organic Frameworks.

Singlet fission (SF) has been explored as a viable route to improve photovoltaic performance by producing more excitons. Efficient SF is achieved through a high degree of interchromophoric coupling that facilitates electron superexchange to generate triplet pairs. However, strongly coupled chromophores often form excimers that can serve as an SF intermediate or a low-energy trap site. The succeeding decoherence process, however, requires an optimum electronic coupling to facilitate the isolation of triplet production from the initially prepared correlated triplet pair. Conformational flexibility and dielectric modulation can provide a means to tune the SF mechanism and efficiency by modulating the interchromophoric electronic interaction. Such a strategy cannot be easily adopted in densely stacked traditional organic solids. Here, we show that the assembly of the SF-active chromophores around well-defined pores of solution-stable metal-organic frameworks (MOFs) can be a great platform for a modular SF process. A series of three new MOFs, built out from 9,10-bis(ethynylenephenyl)anthracene-derived struts, show a topology-defined packing density and conformational flexibility of the anthracene core to dictate the SF mechanism. Various steady-state and transient spectroscopic data suggest that the initially prepared singlet population can prefer either an excimer-mediated SF or a direct SF (both through a virtual charge-transfer (CT) state). These solution-stable frameworks offer the tunability of the dielectric environment to facilitate the SF process by stabilizing the CT state. Given that MOFs are a great platform for various photophysical and photochemical developments, generating a large population of long-lived triplets can expand their utilities in various photon energy conversion schemes.

Synthetic Access to a Framework-Stabilized and Fully Sulfided Analogue of an Anderson Polyoxometalate that is Catalytically Competent for Reduction Reactions.

Polyoxometalates (POMs) featuring 7, 12, 18, or more redox-accessible transition metal ions are ubiquitous as selective catalysts, especially for oxidation reactions. The corresponding synthetic and catalytic chemistry of stable, discrete, capping-ligand-free polythiometalates (PTMs), which could be especially attractive for reduction reactions, is much less well developed. Among the challenges are the propensity of PTMs to agglomerate and the tendency for agglomeration to block reactant access of catalyst active sites. Nevertheless, the pervasive presence of transition metal sulfur clusters metalloenzymes or cofactors that catalyze reduction reactions and the justifiable proliferation of studies of two-dimensional (2D) metal-chalcogenides as reduction catalysts point to the promise of well-defined and controllable PTMs as reduction catalysts. Here, we report the fabrication of agglomeration-immune, reactant-accessible, capping-ligand-free CoIIMo6IVS24n- clusters as periodic arrays in a water-stable, hierarchically porous Zr-metal-organic framework (MOF; NU1K) by first installing a disk-like Anderson polyoxometalate, CoIIIMo6VIO24m-, in size-matched micropores where the siting is established via difference electron density (DED) X-ray diffraction (XRD) experiments. Flowing H2S, while heating, reduces molybdenum(VI) ions to Mo(IV) and quantitatively replaces oxygen anions with sulfur anions (S2-, HS-, S22-). DED maps show that MOF-templated POM-to-PTM conversion leaves clusters individually isolated in open-channel-connected micropores. The structure of the immobilized cluster as determined, in part, by X-ray photoelectron spectroscopy (XPS), X-ray absorption fine structure (XAFS) analysis, and pair distribution function (PDF) analysis of total X-ray scattering agrees well with the theoretically simulated structure. PTM@MOF displays both electrocatalytic and photocatalytic competency for hydrogen evolution. Nevertheless, the initially installed PTM appears to be a precatalyst, gaining competency only after the loss of ∼3 to 6 sulfurs and exposure to hydride-forming metal ions.

Molecular epidemiology and clinical characteristics of enteroviruses associated HFMD in Chengdu, China, 2013-2022.

OBJECTIVES: This study aims to investigate molecular epidemiology and clinical characteristics of enterovirus associated hand-foot-mouth disease (HFMD) in Chengdu, China, 2013-2022. Monitoring the molecular epidemiology and clinical features of HFMD for up to 10 years may provide some ideas for future protection and control measures. METHODS: We conducted a retrospective analysis of the medical records of all patients with laboratory-confirmed HFMD-related enterovirus infection at the West China Second University Hospital from January 2013 to December 2022. We described the characteristics in serotype, age, sex distribution and hospitalization of enterovirus infection cases using data analysis and graphic description. RESULTS: A total of 29,861 laboratory-confirmed cases of HFMD-related enterovirus infection were reported from 2013 to 2022. There was a significant reduction in the number and proportion of EV-A71 cases after 2016, from 1713 cases (13.60%) in 2013-2015 to 150 cases (1.83%) in 2017-2019. During the COVID-19 pandemic, EV-A71 cases even disappeared. The proportion of CV-A16 cases decreased from 13.96% in 2013-2015 to 10.84% in 2017-2019 and then to 4.54% in 2020-2022. Other (non-EV-A71 and non-CV-A16) serotypes accounted for 95.45% during 2020-2022, with CV-A6 accounting for 50.39% and CV-A10 accounting for 10.81%. Thus, CV-A6 and CV-A10 became the main prevalent serotypes. Furthermore, There was no significant difference in the enterovirus prevalence rate between males and females. The hospitalization rate of EV-A71 patients was higher that of other serotypes. In general, the proportion of HFMD hospitalizations caused by other pathogens except for EV-A71, CV-A16, CV-A10 and CV-A16 was second only to that caused by EV-A71. The proportion of children over 4 years old infected with enterovirus increased. CONCLUSION: The incidence of HFMD associated with enterovirus infection has decreased significantly and CV-A6 has been the main pathogen of HFMD in Chengdu area in recent years. The potential for additional hospitalizations for other untested enterovirus serotypes suggested that attention should also be paid to the harms of infections with unknown enterovirus serotypes. Children with HFMD were older. The development of new diagnostic reagents and vaccines may play an important role in the prevention and control of enterovirus infection.

Triplet Generation Through Singlet Fission in Metal-Organic Framework: An Alternative Route to Inefficient Singlet-Triplet Intersystem Crossing.

High quantum yield triplets, populated by initially prepared excited singlets, are desired for various energy conversion schemes in solid working compositions like porous MOFs. However, a large disparity in the distribution of the excitonic center of mass, singlet-triplet intersystem crossing (ISC) in such assemblies is inhibited, so much so that a carboxy-coordinated zirconium heavy metal ion cannot effectively facilitate the ISC through spin-orbit coupling. Circumventing this sluggish ISC, singlet fission (SF) is explored as a viable route to generating triplets in solution-stable MOFs. Efficient SF is achieved through a high degree of interchromophoric coupling that facilitates electron super-exchange to generate triplet pairs. Here we show that a predesigned chromophoric linker with extremely poor ISC efficiency (kISC ) but E S 1 ≥ 2 E T 1 ${{E}_{{S}_{1}}\ge {2E}_{{T}_{1}}}$ form triplets in MOF in contrast to the frameworks that are built from linkers with sizable kISC but E S 1 ≤ 2 E T 1 ${{E}_{{S}_{1}}\le {2E}_{{T}_{1}}}$ . This work opens a new photophysical and photochemical avenue in MOF chemistry and utility in energy conversion schemes.

Photocatalytic Biocidal Coatings Featuring Zr6Ti4-Based Metal-Organic Frameworks.

The world is currently suffering socially, economically, and politically from the recent pandemic outbreak due to the coronavirus disease 2019 (COVID-19), and those in hospitals, schools, and elderly nursing homes face enhanced threats. Healthcare textiles, such as masks and medical staff gowns, are susceptible to contamination of various pathogenic microorganisms, including bacteria and viruses. Metal-organic frameworks (MOFs) can potentially address these challenges due to their tunable reactivity and ability to be incorporated as porous coatings on textile materials. Here, we report how incorporating titanium into the zirconium-pyrene-based MOF NU-1000, denoted as NU-1012, generates a highly reactive biocidal photocatalyst. This MOF features a rare ligand migration phenomenon, and both the Ti/Zr center and the pyrene linker act synergistically as dual active centers and widen the absorption band for this material, which results in enhanced reactive oxygen species generation upon visible light irradiation. Additionally, we found that the ligand migration process is generally applicable to other csq topology Zr-MOFs. Importantly, NU-1012 can be easily incorporated onto cotton textile cloths as a coating, and the resulting composite material demonstrates fast and potent biocidal activity against Gram-negative bacteria (Escherichia coli), Gram-positive bacteria (Staphylococcus epidermidis), and T7 bacteriophage virus with up to a 7-log(99.99999%) reduction within 1 h under simulated daylight.

Understanding Diffusional Charge Transport within a Pyrene-Based Hydrogen-Bonded Organic Framework.

Electrochemically active hydrogen-bonded organic frameworks (HOFs) offer opportunities to study charge transport in supramolecular systems where the rate of movement of charges is dependent on weak electronic coupling between individual components. Here, we used potential-step chronoamperometric measurements on electrochemically active, drop-cast HOF-102 films to estimate both redox-hopping-based apparent diffusion coefficients for charge transport and rate constants for linker-to-linker charge transfer (hole transfer) in the mesoporous two-dimensional (2D) plane created by interlinker hydrogen bonding. Also present are one-dimensional columns formed by stacking pyrene units. However, because the HOF-102 crystallites containing these columns are oriented parallel to an underlying electrode, dynamics of charge transport (hole-transport) along the column axis, in contrast to the plane, are not directly probed by the electrochemical measurements. Furthermore, we employed electrochemical impedance spectroscopy to measure the electrical conductivity of the as-deposited films biased at various potentials. We found that both the neutral/singly oxidized and the singly oxidized/doubly oxidized pyrene linker redox couples of HOF-102 can engender hopping-based film conductivity within the 2D plane of HOF-102. Consistent with the radical cation and radical dication nature of the singly and doubly oxidized linkers, respectively, HOF-102 films are electrochromic. The measured values of in-plane charge-diffusion coefficients (∼10-10 to 10-11 cm2 s-1) and electrical conductivity (∼10-6 to 10-8 S cm-1) compare favorably with those for related redox-conductive MOFs and suggest that the transport and conductivity parameters for HOF-102 are sufficiently large to support electrocatalysis by subsequently installed catalysts in films─specifically, films of micron or greater thickness, corresponding to the equivalent hundreds of monolayers of closely packed (i.e., face-to-face-packed) pyrene-derivatives, but with solution access (solvent, ion, and reactant access) still readily provided by channels oriented parallel to an underlying planar electrode.

Mycoplasma genitalium and Chlamydia trachomatis infection among women in Southwest China: a retrospective study.

Mycoplasma genitalium (MG) and Chlamydia trachomatis (CT) are the most common sexually transmitted pathogens, which can cause cervicitis, pelvic inflammation and infertility in female. In the present study, we collected the basic information, clinical results of leucorrhoea and human papillomavirus (HPV) infection of patients, who were involved in both MG and CT RNA detection in West China Second Hospital of Sichuan University from January 2019 to April 2021, ranging from 18 to 50 years old. The results showed that the infection frequencies of MG and CT were 2.6% and 6.5%, respectively. The infection rate of CT in gynaecological patients was significantly higher than that of MG (P < 0.001). Moreover, patients with CT infection often had symptoms of gynaecological diseases, while patients with MG infection remain often asymptomatic. By exploring the connection between MG or CT infection and vaginal secretions, we found that the infection of MG or CT promoted to the increase of vaginal leukocytes, and CT infection exacerbated the decrease of the number of Lactobacillus in the vagina. Further analysis suggested that independent infection and co-infection of MG or CT resulted in abnormal vaginal secretion, affecting the stability of vaginal environment, which may induce vaginal diseases. Unexpectedly, our study found no association between MG or CT infection and high-risk HPV infection. In conclusion, our study explored the infection of MG and CT among women in Southwest China for the first time, and revealed that the infection of MG or CT would affect the homeostasis of vaginal environment, which laid a foundation for the clinical diagnosis and treatment of MG and CT infection.

Melatonin enhances the antioxidant capacity to rescue the honey bee Apis mellifera from the ecotoxicological effects caused by environmental imidacloprid.

Imidacloprid severely poisons the nontarget insect honey bee Apis mellifera. Few treatments are available to mitigate the adverse effects of imidacloprid. The primary concern is that the molecular understanding of imidacloprid toxicity is not comprehensive enough. Oxidative stress is the primary pathophysiological mechanism by which pesticides cause high mortality. Our pilot study found for the first time that imidacloprid stimulates bee brains to secrete melatonin, a free radical scavenger. However, the molecular basis for imidacloprid toxicity and the role of melatonin in coping with imidacloprid have not been systematically investigated in bees. This study administered an environmental dose of imidacloprid (36 ng/bee) orally to A. mellifera. The detoxification gene cytochrome P450 CYP4G11 was significantly induced. However, potent cytotoxicity of imidacloprid suppressed the expression of the antioxidants catalase (CAT) and thioredoxin reductase (TrxR), and the activity of guaiacol peroxidase (GPX), superoxide dismutase (SOD), and reduced glutathione (GSH) was not induced. The levels of reactive oxygen species (ROS) and the lipid peroxidation marker malondialdehyde (MDA) were increased. The expression of the apoptotic genes cysteinyl aspartate specific proteinase (Caspase-3) and apoptosis inducing factor (AIF) increased, and the apoptotic features of midgut cells were prominently apparent. These results suggest that imidacloprid disrupts the bee antioxidant system, causing severe oxidative stress and tissue damage and ultimately leading to apoptosis. Significantly, however, imidacloprid exposure also stimulated bee brains to continuously secrete melatonin. Further preadministration of exogenous melatonin (200 ng/bee) orally to bees significantly reversed and enhanced the activity of the imidacloprid-suppressed antioxidants CAT, SOD, and GSH, which allowed imidacloprid-induced ROS accumulation to be effectively alleviated. The MDA content, apoptotic genes Caspase-3 and AIF, and detoxification gene CYPG411 expression were restored to normalization; midgut cell damage, apoptosis, and mortality were significantly reduced. These findings strongly suggest that melatonin enhanced bee antioxidant capacity, thus attenuating oxidative stress and apoptosis to confer imidacloprid tolerance to honey bees. Melatonin secretion may be a defense mechanism to mitigate imidacloprid toxicity.

Photoinduced Charge Transfer with a Small Driving Force Facilitated by Exciplex-like Complex Formation in Metal-Organic Frameworks.

Photoinduced charge transfer (PCT) is a key step in the light-harvesting (LH) process producing the redox equivalents for energy conversion. However, like traditional macromolecular donor-acceptor assemblies, most MOF-derived LH systems are designed with a large ΔG0 to drive PCT. To emulate the functionality of the reaction center of the natural LH complex that drives PCT within a pair of identical chromophores producing charge carriers with maximum potentials, we prepared two electronically diverse carboxy-terminated zinc porphyrins, BFBP(Zn)-COOH and TFP(Zn)-COOH, and installed them into the hexagonal pores of NU-1000 via solvent-assisted ligand incorporation (SALI), resulting in BFBP(Zn)@NU-1000 and TFP(Zn)@NU-1000 compositions. Varying the number of trifluoromethyl groups at the porphyrin core, we tuned the ground-state redox potentials of the porphyrins within ca. 0.1 V relative to that of NU-1000, defining a small ΔG0 for PCT. For BFBP(Zn)@NU-1000, the relative ground- and excited-state redox potentials of the components facilitate an energy transfer (EnT) from NU-1000* to BFBP(Zn), forming BFBP(Zn)S1* which entails a long-lived charge-separated complex formed through an exciplex-like [BFBP(Zn)S1*-TBAPy] intermediate. Various time-resolved spectroscopic data suggest that EnT from NU-1000* may not involve a fast Förster-like resonance energy transfer (FRET) but rather through a slow [NU-1000*-BFBP(Zn)] intermediate formation. In contrast, TFP(Zn)@NU-1000 displays an efficient EnT from NU-1000* to [TFP(Zn)-TBAPy], a complex that formed at the ground state through electronic interaction, and thereon showed the excited-state feature of [TFP(Zn)-TBAPy]*. The results will help to develop synthetic LHC systems that can produce long-lived photogenerated charge carriers with high potentials, i.e., high open-circuit voltage in photoelectrochemical setups.

Charge Transport in Zirconium-Based Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) are a class of crystalline porous materials characterized by inorganic nodes and multitopic organic linkers. Because of their molecular-scale porosity and periodic intraframework chemical functionality, MOFs are attractive scaffolds for supporting and/or organizing catalysts, photocatalysts, chemical-sensing elements, small enzymes, and numerous other functional-property-imparting, nanometer-scale objects. Notably, these objects can be installed after the synthesis of the MOF, eliminating the need for chemical and thermal compatibility of the objects with the synthesis milieu. Thus, postsynthetically functionalized MOFs can present three-dimensional arrays of high-density, yet well-separated, active sites. Depending on the application and corresponding morphological requirements, MOF materials can be prepared in thin-film form, pelletized form, isolated single-crystal form, polycrystalline powder form, mixed-matrix membrane form, or other forms. For certain applications, most obviously catalytic hydrolysis and electro- or photocatalytic water splitting, but also many others, an additional requirement is water stability. MOFs featuring hexa-zirconium(IV)-oxy nodes satisfy this requirement. For applications involving electrocatalysis, charge storage, photoelectrochemical energy conversion, and chemiresistive sensing, a further requirement is electrical conductivity, as embodied in electron or hole transport. As most MOFs, under most conditions, are electrically insulating, imparting controllable charge-transport behavior is both a chemically intriguing and chemically compelling challenge.Herein, we describe three strategies to render zirconium-based metal-organic frameworks (MOFs) tunably electrically conductive and, therefore, capable of transporting charge on the few nanometers (i.e., several molecular units) to few micrometers (i.e., typical dimensions for MOF microcrystallites) scale. The first strategy centers on redox-hopping between periodically arranged, chemically equivalent sites, essentially repetitive electron (or hole) self-exchange. Zirconium nodes are electrically insulating, but they can function as grafting sites for (a) redox-active inorganic clusters or (b) molecular redox couples. Alternatively, charge hopping based on linker redox properties can be exploited. Marcus's theory of electron transfer has proven useful for understanding/predicting trends in redox-hopping based conductivity, most notably, in accounting for variations as great as 3000-fold depending on the direction of charge propagation through structurally anisotropic MOFs. In MOF environments, propagation of electronic charge via redox hopping is necessarily accompanied by movement of charge-compensating ions. Consequently, rates of redox hopping can depend on both the identity and concentration of ions permeating the MOF. In the context of electrocatalysis, an important goal is to transport electronic charge fast enough to match or exceed the inherent activity of MOF-based or MOF-immobilized catalysts.Bandlike electronic conductivity is the focus of an alternative strategy: one based on the introduction of molecular guests capable of forming donor-acceptor charge transfer complexes with the host framework. Theory again can be applied predictively to alter conductivity. A third strategy similarly emphasizes electronic conductivity, but it makes use of added bridges in the form of molecular oligomers or inorganic clusters that can then be linked to span the length of a MOF crystallite. For all strategies, retention of molecular-scale porosity is emphasized, as this property is key to many applications. Finally, while our focus is on Zr-MOFs, the described approaches clearly are extendable to other MOF compositions, as has already been demonstrated, in part, in studies by others.

Imidacloprid activates ROS and causes mortality in honey bees (Apis mellifera) by inducing iron overload.

Imidacloprid, a neonicotinoid pesticide widely used for insect pest control, has become a potential pollutant to pollinators. Previous reports have demonstrated the toxicity of this drug in activating oxidative stress resulting in high mortality in the honey bee Apis mellifera. However, the mechanisms underlying the toxicity of imidacloprid have not been fully elucidated. In this study, sublethal (36 ng/bee) and median lethal (132 ng/bee) doses of imidacloprid were administered to bees. The results showed dose-dependent increases in reactive oxygen species (ROS), Fe2+, and mortality in bees. Notably, imidacloprid also induced upregulation of the gene encoding ferritin (AmFth), which plays a pivotal role in reducing Fe2+ overload. Upregulation of AmFth has been suggested to be closely related to ROS accumulation and high mortality in bees. To confirm the role played by AmFth in imidacloprid-activated ROS, dsAmFth double-strand was orally administered to bees after exposure to imidacloprid. The results revealed aggravated Fe2+ overload, higher ROS activation, and elevated mortality in the bees, indicating that imidacloprid activated ROS and caused mortality in the bees, probably by inducing iron overload. This study helps to elucidate the molecular mechanisms underlying the toxicity of imidacloprid from the perspective of iron metabolism.

Phospholipase C inhibits apoptosis of porcine oocytes cultured in vitro.

Oocyte apoptosis can be used as an indicator of oocyte quality and development competency. Phospholipase C (PLC) is a critical enzyme that participates in phosphoinositide metabolic regulation and performs many functions, including the regulation of reproduction. In this study, we aimed to explore whether PLC participates in the regulation of apoptosis in porcine oocytes and investigated its possible mechanism. In porcine oocytes, 0.5 µM U73122 (the PLC inhibitor) was considered to be the best concentration to facilitate maturation, and 0.5 µM m-3M3FBS (the PLC activator) was regarded as the most appropriate concentration to inhibit maturation. The percentage of cleavage and blastocysts treated with 0.5 µM U73122 was lower than that of the control group. Furthermore, the percentage of cleavage and blastocysts treated with 0.5 µM m-3M3FBS was higher than that of the control group. The relative PLC messenger RNA (mRNA) expression tested by a quantitative real-time polymerase chain reaction was found to be inhibited by 0.5 µM U73122 or activated by 0.5 µM m-3M3FBS. The relative mRNA abundance of BAK, BAX, CASP3, CASP8, and TP53 and protein abundance of Bak, cleaved caspase-3, caspase-8, and P53 was activated by U73122 or inhibited by m-3M3FBS, while the relative mRNA and protein level of BCL6 showed the opposite trend. The intracellular Ca2+ concentration increased and the expression of PLCB1 protein also increased in porcine oocytes when they were cultured with 0.5 µM m-3M3FBS for 44 hours. The abundance of proteins PKCß and CAMKIIα and the expression of several downstream genes (CDC42, NFATc1, NFATc2, NFκB, and NLK) were activated by m-3M3FBS or inhibited by U73122. Our findings indicate that PLC inhibits apoptosis and maturation in porcine oocytes. The intracellular Ca2+ concentration, two Ca2+ -sensitive proteins, and several downstream genes were positively regulated by PLC.

Investigating the Process and Mechanism of Molecular Transport within a Representative Solvent-Filled Metal-Organic Framework.

Effective permeation into, and diffusive mass transport within, solvent-filled metal-organic frameworks (MOFs) is critical in applications such as MOF-based chemical catalysis of condensed-phase reactions. In this work, we studied the entry from solution of a luminescent probe molecule, 1,3,5,7-tetramethyl-4,4-difluoroboradiazaindacene (BODIPY), into the 1D channel-type, zirconium-based MOF NU-1008 and subsequent transport of the probe through the MOF. Measurements were accomplished via in situ confocal fluorescence microscopy of individual crystallites, where the evolution of the fluorescence response from the crystallite was followed as functions of both time and location within the crystallite. From the confocal data, intracrystalline transport of BODIPY is well-described by one-dimensional diffusion along the channel direction. Varying the chemical identity of the solvent revealed an inverse dependence of probe-molecule diffusivity on bulk-solvent viscosity, qualitatively consistent with expectations from the Stokes-Einstein equation for molecular diffusion. At a more quantitative level, however, measured diffusion coefficients are about 100-fold smaller than expected from Stokes-Einstein, pointing to substantial channel-confinement effects. Evaluation of the confocal data also reveals a non-negligible mass transport resistance, i.e., surface barrier, associated with the probe molecule leaving the solution and permeating the exterior surface of the MOF. Permeation by the probe entails displacement of solvent from the MOF channels. The magnitude of the resistance increases with the size of the solvent molecule. This work draws attention to the importance of MOF structure, external-surface barriers, and solvent molecule identity to the overall transport process in MOFs, which should assist in understanding the performance of MOFs in applications such as condensed-phase heterogeneous catalysis.

Further Development of Magnetic Compression for Gastrojejunostomy in Rabbits.

BACKGROUND: Technical improvement of gastrojejunostomy is critical in bariatric and metabolic surgery. In this study, a novel magnetic compression approach for gastrojejunostomy was evaluated. MATERIALS AND METHODS: Both cylindrical and rectangular magnets were used in rabbits, and the magnets were named according to their location. All the magnets were perorally introduced into the stomach. The position of the jejunal magnet was controlled by a connecting line. When the jejunal magnet spontaneously entered the jejunum, the gastric magnet was introduced into the stomach. An extracorporeal magnet was used to guide these two magnets together, and the magnet pair was left to create a side-to-side anastomosis. The state of the animals and extrusion time of the magnets were observed. The anastomoses were evaluated by burst pressure and histology. RESULTS: Gastrojejunostomy was successfully established in all animals. Cylindrical and rectangular magnets spontaneously entered the jejunum through the pylorus within 2.4 ± 0.5 and 6.0 ± 0.8 d, respectively (P < 0.01). The cylindrical and rectangular magnet pairs fell off within 15.3 ± 0.8 and 11.9 ± 1.1 d, respectively (P < 0.01). The burst pressures were statistically similar between the two types of magnets (P > 0.05). Histological examination showed sealed anastomoses with mild inflammation of the mucosa and fibrosis within the submucosa. CONCLUSIONS: The feasibility and efficacy of establishing gastrojejunostomy by guidewire introduction of magnets, which were guided together with an extracorporeal magnet, were confirmed in rabbits. In humans, with the clinical use of this procedure, surgery would be greatly simplified.

Anisotropic Redox Conductivity within a Metal-Organic Framework Material.

Engendering electrical conductivity in otherwise insulating metal-organic framework (MOF) materials is key to rendering these materials fully functional for a range of potential applications, including electrochemical and photo-electrochemical catalysis. Here we report that the platform MOF, NU-1000, can be made electrically conductive via reversible electrochemical oxidation of a fraction of the framework's tetraphenylpyrene linkers, where the basis for conduction is redox hopping. At a microscopic level, redox hopping is akin to electron self-exchange and is describable by Marcus' well-known theory of electron transfer. At a macroscopic level, the hopping behavior leads to diffusive charge transport and is quantifiable as an apparent diffusion coefficient, Dhopping. Theory suggests that the csq topology of NU-1000, together with its characteristic one-dimensional mesopores, will result in direction-dependent, that is, anisotropic, electrical conductivity. Detailed computations suggest that the governing factor is the strength of electronic coupling between pairs of linkers sited in the a,b plane of the MOF versus the mesopore-aligned c axis of the crystal. The notion has been put to the test experimentally by configuring the MOF as an array of selectively oriented, electrode-supported crystallites, where the rodlike crystallites are either oriented largely normal to the electrode (requiring redox hopping along the c direction) or mainly parallel (requiring redox hopping mainly through the a,b plane). The orientations are preselected by preparing MOF films either via interfacial solvothermal synthesis or via electrophoretic deposition. In semiquantitative accord with computational predictions, Dhopping is up to ∼3500 times larger in the c direction than through the a,b plane. In addition to their fundamental significance, the findings have clear implications for the design and optimization of MOFs for electrocatalysis and for other applications that rely upon electrical conductivity.

The effects of phospholipase C on oestradiol and progesterone secretion in porcine granulosa cells cultured in vitro.

Granulosa cells play important roles in the regulation of ovarian functions. Phospholipase C is crucial in several signalling pathways and could participate in the molecular mechanisms of cell proliferation, differentiation and ageing. The objective of this study was to identify the effects of phospholipase C on the steroidogenesis of oestradiol and progesterone in porcine granulosa cells cultured in vitro. Inhibitor U73122 or activator m-3M3FBS of phospholipase C was added to the in vitro medium of porcine granulosa cells, respectively. The secretion of oestradiol decreased after 2 hr, 8 hr, 12 hr, 24 hr and 48 hr of treatment with 500 nM U73122 (p < .05) and decreased after 2 hr of treatment in the 500 nM m-3M3FBS addition group (p < .05). The secretion of progesterone increased after 4 hr of treatment with 500 nM U73122 (p < .05) and increased after 2 hr and 8 hr of treatment in the 500 nM m-3M3FBS addition group (p < .05). The ratio of oestradiol to progesterone decreased at each time point, except 8 hr after the addition of 500 nM U73122 (p < .05). The ratio of oestradiol to progesterone decreased after 2 hr (p < .05) of treatment with 500 nM m-3M3FBS. In genes that regulate the synthesis of oestradiol or progesterone, the mRNA expression of CYP11A1 was markedly increased (p < .05), and the mRNA expression of other genes did not change significantly in the U73122 treatment group, while the addition of m-3M3FBS did not change those genes significantly despite the contrary trend. Our results demonstrated that phospholipase C can be a potential target to stimulate the secretion of oestradiol and suppress progesterone secretion in porcine granulosa cells cultured in vitro, which shed light on a novel biological function of phospholipase C in porcine granulosa cells.