Biodistribution of cerium dioxide and titanium dioxide nanomaterials in rats after single and repeated inhalation exposures.

BACKGROUND: Physiologically based kinetic models facilitate the safety assessment of inhaled engineered nanomaterials (ENMs). To develop these models, high quality datasets on well-characterized ENMs are needed. However, there are at present, several data gaps in the systemic availability of poorly soluble particles after inhalation. The aim of the present study was therefore to acquire two comparable datasets to parametrize a physiologically-based kinetic model. METHOD: Rats were exposed to cerium dioxide (CeO2, 28.4 ± 10.4 nm) and titanium dioxide (TiO2, 21.6 ± 1.5 nm) ENMs in a single nose-only exposure to 20 mg/m3 or a repeated exposure of 2 × 5 days to 5 mg/m3. Different dose levels were obtained by varying the exposure time for 30 min, 2 or 6 h per day. The content of cerium or titanium in three compartments of the lung (tissue, epithelial lining fluid and freely moving cells), mediastinal lymph nodes, liver, spleen, kidney, blood and excreta was measured by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) at various time points post-exposure. As biodistribution is best studied at sub-toxic dose levels, lactate dehydrogenase (LDH), total protein, total cell numbers and differential cell counts were determined in bronchoalveolar lavage fluid (BALF). RESULTS: Although similar lung deposited doses were obtained for both materials, exposure to CeO2 induced persistent inflammation indicated by neutrophil granulocytes influx and exhibited an increased lung elimination half-time, while exposure to TiO2 did not. The lavaged lung tissue contained the highest metal concentration compared to the lavage fluid and cells in the lavage fluid for both materials. Increased cerium concentrations above control levels in secondary organs such as lymph nodes, liver, spleen, kidney, urine and faeces were detected, while for titanium this was found in lymph nodes and liver after repeated exposure and in blood and faeces after a single exposure. CONCLUSION: We have provided insight in the distribution kinetics of these two ENMs based on experimental data and modelling. The study design allows extrapolation at different dose-levels and study durations. Despite equal dose levels of both ENMs, we observed different distribution patterns, that, in part may be explained by subtle differences in biological responses in the lung.

Mechanistic Similarities between 3D Human Bronchial Epithelium and Mice Lung, Exposed to Copper Oxide Nanoparticles, Support Non-Animal Methods for Hazard Assessment.

The diversity and increasing prevalence of products derived from engineered nanomaterials (ENM), warrants implementation of non-animal approaches to health hazard assessment for ethical and practical reasons. Although non-animal approaches are becoming increasingly popular, there are almost no studies of side-by-side comparisons with traditional in vivo assays. Here, transcriptomics is used to investigate mechanistic similarities between healthy/asthmatic models of 3D air-liquid interface (ALI) cultures of donor-derived human bronchial epithelia cells, and mouse lung tissue, following exposure to copper oxide ENM. Only 19% of mouse lung genes with human orthologues are not expressed in the human 3D ALI model. Despite differences in taxonomy and cellular complexity between the systems, a core subset of matching genes cluster mouse and human samples strictly based on ENM dose (exposure severity). Overlapping gene orthologue pairs are highly enriched for innate immune functions, suggesting an important and maybe underestimated role of epithelial cells. In conclusion, 3D ALI models based on epithelial cells, are primed to bridge the gap between traditional 2D in vitro assays and animal models of airway exposure, and transcriptomics appears to be a unifying dose metric that links in vivo and in vitro test systems.

Diesel exhaust alters the response of cultured primary bronchial epithelial cells from patients with chronic obstructive pulmonary disease (COPD) to non-typeable Haemophilus influenzae.

BACKGROUND: Exacerbations constitute a major cause of morbidity and mortality in patients suffering from chronic obstructive pulmonary disease (COPD). Both bacterial infections, such as those with non-typeable Haemophilus influenzae (NTHi), and exposures to diesel engine emissions are known to contribute to exacerbations in COPD patients. However, the effect of diesel exhaust (DE) exposure on the epithelial response to microbial stimulation is incompletely understood, and possible differences in the response to DE of epithelial cells from COPD patients and controls have not been studied. METHODS: Primary bronchial epithelial cells (PBEC) were obtained from age-matched COPD patients (n = 7) and controls (n = 5). PBEC were cultured at the air-liquid interface (ALI) to achieve mucociliary differentiation. ALI-PBECs were apically exposed for 1 h to a stream of freshly generated whole DE or air. Exposure was followed by 3 h incubation in presence or absence of UV-inactivated NTHi before analysis of epithelial gene expression. RESULTS: DE alone induced an increase in markers of oxidative stress (HMOX1, 50-100-fold) and of the integrated stress response (CHOP, 1.5-2-fold and GADD34, 1.5-fold) in cells from both COPD patients and controls. Exposure of COPD cultures to DE followed by NTHi caused an additive increase in GADD34 expression (up to 3-fold). Importantly, DE caused an inhibition of the NTHi-induced expression of the antimicrobial peptide S100A7, and of the chaperone protein HSP5A/BiP. CONCLUSIONS: Our findings show that DE exposure of differentiated primary airway epithelial cells causes activation of the gene expression of HMOX1 and markers of integrated stress response to a similar extent in cells from COPD donors and controls. Furthermore, DE further increased the NTHi-induced expression of GADD34, indicating a possible enhancement of the integrated stress response. DE reduced the NTHi-induced expression of S100A7. These data suggest that DE exposure may cause adverse health effects in part by decreasing host defense against infection and by modulating stress responses.

Cellular response of mucociliary differentiated primary bronchial epithelial cells to diesel exhaust.

Diesel emissions are the main source of air pollution in urban areas, and diesel exposure is linked with substantial adverse health effects. In vitro diesel exposure models are considered a suitable tool for understanding these effects. Here we aimed to use a controlled in vitro exposure system to whole diesel exhaust to study the effect of whole diesel exhaust concentration and exposure duration on mucociliary differentiated human primary bronchial epithelial cells (PBEC). PBEC cultured at the air-liquid interface were exposed for 60 to 375 min to three different dilutions of diesel exhaust (DE). The DE mixture was generated by an engine at 47% load, and characterized for particulate matter size and distribution and chemical and gas composition. Cytotoxicity and epithelial barrier function was assessed, as well as mRNA expression and protein release analysis. DE caused a significant dose-dependent increase in expression of oxidative stress markers (HMOX1 and NQO1; n = 4) at 6 h after 150 min exposure. Furthermore, DE significantly increased the expression of the markers of the integrated stress response CHOP and GADD34 and of the proinflammatory chemokine CXCL8, as well as release of CXCL8 protein. Cytotoxic effects or effects on epithelial barrier function were observed only after prolonged exposures to the highest DE dose. These results demonstrate the suitability of our model and that exposure dose and duration and time of analysis postexposure are main determinants for the effects of DE on differentiated primary human airway epithelial cells.

Inhaled multiwalled carbon nanotubes modulate the immune response of trimellitic anhydride-induced chemical respiratory allergy in brown Norway rats.

The interaction between exposure to nanomaterials and existing inflammatory conditions has not been fully established. Multiwalled carbon nanotubes (MWCNT; Nanocyl NC 7000 CAS no. 7782-42-5; count median diameter in atmosphere 61 ± 5 nm) were tested by inhalation in high Immunoglobulin E (IgE)-responding Brown Norway (BN) rats with trimellitic anhydride (TMA)-induced respiratory allergy. The rats were exposed 2 days/week over a 3.5-week period to a low (11 mg/m(3)) or a high (22 mg/m(3)) concentration of MWCNT. Nonallergic animals exposed to MWCNT and unexposed allergic and nonallergic rats served as controls. At the end of the exposure period, the allergic animals were rechallenged with TMA. Histopathological examination of the respiratory tract showed agglomerated/aggregated MWCNT in the lungs and in the lung-draining lymph nodes. Frustrated phagocytosis was observed as incomplete uptake of MWCNT by the alveolar macrophages and clustering of cells around MWCNT. Large MWCNT agglomerates/aggregates were found in granulomas in the allergic rats, suggesting decreased macrophage clearance in allergic rats. In allergic rats, MWCNT exposure decreased serum IgE levels and the number of lymphocytes in bronchoalveolar lavage. In conclusion, MWCNT did not aggravate the acute allergic reaction but modulated the allergy-associated immune response.

Toxicological evaluation of primary particulate matter emitted from combustion of aviation fuel.

Recently, Sustainable Aviation Fuel (SAF) blends and novel combustion technologies have been introduced to reduce aircraft engine emissions. However, there is limited knowledge about the impact of combustion technology and fuel composition on toxicity of primary Particulate Matter (PM) emissions, comparable to regulated non-volatile PM (nvPM). In this study, primary PM was collected on filters using a standardised approach, from both a Rich-Quench-Lean (RQL) combustion rig and a bespoke liquid fuelled Combustion Aerosol Standard (CAST) Generator burning 12 aviation fuels including conventional Jet-A, SAFs, and blends thereof. The fuels varied in aromatics (0-25.2%), sulphur (0-3000 ppm) and hydrogen (13.43-15.31%) contents. Toxicity of the collected primary PM was studied in vitro utilising Air-Liquid Interface (ALI) exposure of lung epithelial cells (Calu-3) in monoculture and co-culture with macrophages (differentiated THP-1 cells). Cells were exposed to PM extracted from filters and nebulised from suspensions using a cloud-based ALI exposure system. Toxicity readout parameters were analysed 24 h after exposure. Results showed presence of genotoxicity and changes in gene expression at dose levels which did not induce cytotoxicity. DNA damage was detected through Comet assay in cells exposed to CAST generated samples. Real-Time PCR performed to investigate the expression profile of genes involved in oxidative stress and DNA repair pathways showed different behaviours after exposure to the various PM samples. No differences were found in pro-inflammatory interleukin-8 secretion. This study indicates that primary PM toxicity is driven by wider factors than fuel composition, highlighting that further work is needed to substantiate the full toxicity of aircraft exhaust PM inclusive of secondary PM emanating from numerous engine technologies across the power range burning conventional Jet-A and SAF.

Smoking-Associated Exposure of Human Primary Bronchial Epithelial Cells to Aldehydes: Impact on Molecular Mechanisms Controlling Mitochondrial Content and Function.

Chronic obstructive pulmonary disease (COPD) is a devastating lung disease primarily caused by exposure to cigarette smoke (CS). During the pyrolysis and combustion of tobacco, reactive aldehydes such as acetaldehyde, acrolein, and formaldehyde are formed, which are known to be involved in respiratory toxicity. Although CS-induced mitochondrial dysfunction has been implicated in the pathophysiology of COPD, the role of aldehydes therein is incompletely understood. To investigate this, we used a physiologically relevant in vitro exposure model of differentiated human primary bronchial epithelial cells (PBEC) exposed to CS (one cigarette) or a mixture of acetaldehyde, acrolein, and formaldehyde (at relevant concentrations of one cigarette) or air, in a continuous flow system using a puff-like exposure protocol. Exposure of PBEC to CS resulted in elevated IL-8 cytokine and mRNA levels, increased abundance of constituents associated with autophagy, decreased protein levels of molecules associated with the mitophagy machinery, and alterations in the abundance of regulators of mitochondrial biogenesis. Furthermore, decreased transcript levels of basal epithelial cell marker KRT5 were reported after CS exposure. Only parts of these changes were replicated in PBEC upon exposure to a combination of acetaldehyde, acrolein, and formaldehyde. More specifically, aldehydes decreased MAP1LC3A mRNA (autophagy) and BNIP3 protein (mitophagy) and increased ESRRA protein (mitochondrial biogenesis). These data suggest that other compounds in addition to aldehydes in CS contribute to CS-induced dysregulation of constituents controlling mitochondrial content and function in airway epithelial cells.

Molecular Signature of Asthma-Enhanced Sensitivity to CuO Nanoparticle Aerosols from 3D Cell Model.

More than 5% of any population suffers from asthma, and there are indications that these individuals are more sensitive to nanoparticle aerosols than the healthy population. We used an air-liquid interface model of inhalation exposure to investigate global transcriptomic responses in reconstituted three-dimensional airway epithelia of healthy and asthmatic subjects exposed to pristine (nCuO) and carboxylated (nCuOCOOH) copper oxide nanoparticle aerosols. A dose-dependent increase in cytotoxicity (highest in asthmatic donor cells) and pro-inflammatory signaling within 24 h confirmed the reliability and sensitivity of the system to detect acute inhalation toxicity. Gene expression changes between nanoparticle-exposed versus air-exposed cells were investigated. Hierarchical clustering based on the expression profiles of all differentially expressed genes (DEGs), cell-death-associated DEGs (567 genes), or a subset of 48 highly overlapping DEGs categorized all samples according to "exposure severity", wherein nanoparticle surface chemistry and asthma are incorporated into the dose-response axis. For example, asthmatics exposed to low and medium dose nCuO clustered with healthy donor cells exposed to medium and high dose nCuO, respectively. Of note, a set of genes with high relevance to mucociliary clearance were observed to distinctly differentiate asthmatic and healthy donor cells. These genes also responded differently to nCuO and nCuOCOOH nanoparticles. Additionally, because response to transition-metal nanoparticles was a highly enriched Gene Ontology term (FDR 8 × 10-13) from the subset of 48 highly overlapping DEGs, these genes may represent biomarkers to a potentially large variety of metal/metal oxide nanoparticles.

Five-day inhalation toxicity study of three types of synthetic amorphous silicas in Wistar rats and post-exposure evaluations for up to 3 months.

Evidence suggests that short-term animal exposures to synthetic amorphous silicas (SAS) and crystalline silica can provide comparable prediction of toxicity to those of 90-day studies, therefore providing the opportunity to screen these types of substances using short-term rather than 90-day studies. To investigate this hypothesis, the inhalation toxicity of three SAS, precipitated silica Zeosil 45, silica gel Syloid 74, and pyrogenic silica Cab-O-Sil M5 was studied in Wistar rats. Rats were exposed nose-only to concentrations of 1, 5 or 25mg/m(3) of one of the SAS 6h a day for five consecutive days. Positive controls were exposed to 25mg/m(3) crystalline silica (quartz dust), negative controls to clean air. Animals were necropsied the day after the last exposure or 1 or 3 months later. All exposures were tolerated without serious clinical effects, changes in body weight or food intake. Differences in the effects associated with exposure to the three types of SAS were limited and almost exclusively confined to the 1-day post-exposure time point. Silicon levels in tracheobronchial lymph nodes were below the detection limit in all groups at all time points. Silicon was found in the lungs of all high concentration SAS groups 1-day post-exposure, and was cleared 3 months later. Exposure to all three SAS at 25mg/m(3) induced elevations in biomarkers of cytotoxicity in bronchoalveolar lavage fluid (BALf), increases in lung and tracheobronchial lymph node weight and histopathological lung changes 1-day post-exposure. Exposure to all three SAS at 5mg/m(3) induced histopathological changes and changes in BALf only. With all three SAS these effects were transient and, with the exception of slight histopathological lung changes at the higher exposure levels, were reversible during the 3-month recovery period. No adverse changes were observed in animals exposed to any of the SAS at 1mg/m(3). In contrast, with quartz-exposed animals the presence of silicon in the lungs was persistent and toxicological effects differed from those seen with SAS both with regard to the type and severity as well as in the time-response profile. In quartz-exposed animals silicon in the tracheobronchial lymph nodes was below the detection limit but silicon was found in the lungs at comparable levels 0-, 1- and 3-months post-exposure. One-day post-exposure to quartz, elevations in biomarkers of cytotoxicity in BALf, increases in lung and tracheobronchial lymph node weight and histopathological lung changes were minimal. These effects were present at 1-month post-exposure and progressively more severe at 3-months post-exposure. Overall, the results of the current study are similar to those of other published studies that had a 90-day exposure period and both types of studies indicate that the lack of lung clearance is a key factor in the development of silicosis.

Factors of concern in a human 3D cellular airway model exposed to aerosols of nanoparticles.

Mucilair 3D bronchial airway models, cultured at an air-liquid interface, were exposed to aerosols of copper oxide (CuO) nanoparticles in Vitrocell air exposure modules. Four cell donors, four exposure modules and four exposure concentrations were varied within four different exposure sessions using a statistical experimental design called a hyper-Graeco-Latin square. Analysis of variance techniques were used to investigate the effects of these factors on release and RNA expression of inflammation markers monocyte chemoattractant protein-1 (MCP-1) interleukines 6 and 8 (IL-6 and IL-8) an cytotoxicity marker lactate dehydrogenase (LDH) determined 24h after exposure. The same techniques were also used to conduct a global analysis on RNA expressions of 10,000 genes. There were no major signs of cytotoxicity. Release of IL-6 and MCP-1 was affected by CuO concentration, and, for MCP-1, by donor variation. IL-8 release was not affected by these factors. However, gene expression of all three inflammation markers was strongly affected by CuO concentration but not by the other factors. Further, among the 10,000 genes involved in the global analysis of RNA expression, 1736 were affected by CuO concentration, 704 by donor variation and 269 by variation among exposure sessions. The statistical design permitted the assessment of the effect of CuO nanoparticles on 3D airway models independently of technical or experimental sources of variation. We recommend using such a design to address all potential sources of variation. This is especially recommended if test materials are expected to be less toxic than CuO, because the variation among the concentration levels could then be close to the variation among donors or exposure sessions.

The determination of exogenous formaldehyde in blood of rats during and after inhalation exposure.

Formaldehyde (FA) is suspected of being associated with the development of leukemia. An inhalation experiment with FA was performed in rats to study whether FA can enter the blood and could thus cause systemic toxicity in remote tissues such as the bone marrow. Therefore, a sophisticated analytical method was developed to detect blood concentrations of FA during and after single 6-h exposure by inhalation. In order to differentiate between exogenous and endogenous FA the rats were exposed to stable isotope ((13)C) labeled FA by inhalation. During and after exposure of the rats to (13)C-FA their blood was analyzed to determine the ratio between labeled and natural FA in blood and the total blood concentration of FA. With respect to sensitivity, with the applied method exogenous (13)C-FA could have been detected in blood at a concentration approximately 1.5% of the endogenous FA blood concentration. Exogenous (13)C-FA was not detectable in the blood of rats either during or up to 30 min after the exposure. It was concluded that the inhalation of (13)C-FA at 10 ppm for 6h did not result in an increase of the total FA concentration in blood.

The respiratory allergen glutaraldehyde in the local lymph node assay: sensitization by skin exposure, but not by inhalation.

Previously, a selection of low molecular weight contact and respiratory allergens had tested positive in both a skin and a respiratory local lymph node assay (LLNA), but formaldehyde was negative for sensitization by inhalation. To investigate whether this was due to intrinsic properties of aldehyde sensitizers, the structurally related allergen glutaraldehyde (GA) was tested. BALB/c mice were exposed by inhalation to 6 or 18ppm GA (respiratory LLNA), both generated as a vapor and as an aerosol. Other groups received 0.25% or 2.5% GA on the skin of the ears (skin LLNA). Lymphocyte proliferation and cytokine production were measured in the draining lymph nodes. GA was positive in the skin LLNA and its cytokine profile (IL-4/IFN-γ) skewed towards a Th2-type immune response with increasing dose. Inhalation exposure did not result in increased lymphocyte proliferation or increased cytokine levels, despite comparable tissue damage (irritation) in the skin and respiratory tract. We hypothesize that the highly reactive and hydrophilic GA oligomerizes in the protein-rich mucous layer of the respiratory tract, which impedes sensitization but still facilitates local irritation. Within the context of risk assessment in respiratory allergy, our results stress the importance of prevention of skin--besides inhalation-- exposure to aldehydes like GA.

Murine lung tumor response after exposure to cigarette mainstream smoke or its particulate and gas/vapor phase fractions.

Knowledge on mechanisms of smoking-induced tumorigenesis and on active smoke constituents may improve the development and evaluation of chemopreventive and therapeutic interventions, early diagnostic markers, and new and potentially reduced-risk tobacco products. A suitable laboratory animal disease model of mainstream cigarette smoke inhalation is needed for this purpose. In order to develop such a model, A/J and Swiss SWR/J mouse strains, with a genetic susceptibility to developing lung adenocarcinoma, were whole-body exposed to diluted cigarette mainstream smoke at 0, 120, and 240 mg total particulate matter per m(3) for 6h per day, 5 days per week. Mainstream smoke is the smoke actively inhaled by the smoker. For etiological reasons, parallel exposures to whole smoke fractions (enriched for particulate or gas/vapor phase) were performed at the higher concentration level. After 5 months of smoke inhalation and an additional 4-month post-inhalation period, both mouse strains responded similarly: no increase in lung tumor multiplicity was seen at the end of the inhalation period; however, there was a concentration-dependent tumorigenic response at the end of the post-inhalation period (up to 2-fold beyond control) in mice exposed to the whole smoke or the particulate phase. Tumors were characterized mainly as pulmonary adenomas. At the end of the inhalation period, epithelial hyperplasia, atrophy, and metaplasia were found in the nasal passages and larynx, and cellular and molecular markers of inflammation were found in the bronchoalveolar lavage fluid. These inflammatory effects were mostly resolved by the end of the post-inhalation period. In summary, these mouse strains responded to mainstream smoke inhalation with enhanced pulmonary adenoma formation. The major tumorigenic potency resided in the particulate phase, which is contrary to the findings published for environmental tobacco smoke surrogate inhalation in these mouse models.

Particle size-dependent total mass deposition in lungs determines inhalation toxicity of cadmium chloride aerosols in rats. Application of a multiple path dosimetry model.

The relative importance of the three particulate matter (PM) size fractions in ambient air, i.e. coarse (2.5-10 microm), fine (0.1-2.5 microm) and ultrafine (<0.1 microm) fractions, on the induction of adverse health effects is still unknown. Moreover, there is no straightforward relationship between ambient concentration levels, exposure (external dose) and the dose delivered to the target site (internal dose). Recently, a human and a rat airway PM deposition model (MPPDep V1.1) have been developed by CIIT Centers for Health Research and the National Institute of Public Health and the Environment (RIVM), based on the work of O.G. Raabe et al. (1977, In: W.H. Walton, editor, Inhaled Particles IV/2; Pergamon, Oxford) and S. Anjilvel and B. Asgharian (1995, Fundam Appl Toxicol 28:41-50). This paper describes studies using cadmium chloride (CdCl(2)) as a model for toxic aerosol particles to (1) investigate the role of particle size in the development of pulmonary effects, and (2) evaluate the MPPDep model, by comparing predicted deposition with measured deposition of CdCl(2)in the respiratory tract. Rats (ten per group) were exposed for a single 4-h period to CdCl(2)particles at various sizes, i.e. 33, 170, 637 and 1495 nm, all at a target concentration of 1 mg/m(3). Immediately after exposure, four of ten rats per group were killed and trachea, lung lobes, heart, liver and kidneys were collected and preserved to determine the amount of CdCl(2) present in each of these organs. CdCl(2)-induced toxicity, as measured by lactate dehydrogenase (LDH), N-acetyl glucosaminidase (NAG) and protein levels in bronchoalveolar lavage fluid, was determined in the remaining six rats per group the day after exposure. Animals exposed to 33 nm particles showed the highest level of respiratory toxicity, followed by animals exposed to 637 nm particles, then to 170 nm particles and finally by those exposed to 1495 nm particles. Pulmonary cadmium levels showed a similar relationship. The results from the present study suggest that the induction of pulmonary toxicity following inhalation exposure to soluble CdCl(2)particles in the range 30-1500 nm depends on the amount of deposited material, which in its turn depends on the initial (aerodynamic) particle size. In addition, the MPPDep model accurately predicted the measured CdCl(2) deposition. Conclusively, for soluble particles the deposited pulmonary mass (dose) of particles is important for toxicity and is dependent of particle size. These findings may have serious impact on the evaluation of the role of various particle sizes in PM10-associated health effects.