Hybrid Fiber Optic Cable for Strain Profiling and Crack Growth Measurement in Rock, Cement, and Brittle Installation Media.

Brillouin scattering-based distributed fiber optic sensing (DFOS) technologies such as Brillouin optical time domain reflectometry (BOTDR) and Brillouin optical time domain analysis (BOTDA) have broad applicability for the long term and real-time monitoring of large concrete structures, underground mine excavations, pit slopes, and deep subsurface wellbores. When installed in brittle media, however, the meter scale spatial resolution of the BOTDR/A technology prohibits the detection or measurement of highly localized deformations, such as those which form at or along cracks, faults, and other discontinuities. This work presents a novel hybrid fiber optic cable with the ability to self-anchor to any brittle installation media without the need for manual installation along fixed interval points. Laboratory scale testing demonstrates the ability of the hybrid fiber optic cable to measure strains across highly localized deformation zones in both tension and shear. In addition, results show the applicability of the developed technology for strain monitoring in high displacement environments. Linear relationships are proposed for use in estimating the displacement magnitude along discontinuities in brittle media from strain signals collected from the hybrid fiber optic cable. The hybrid fiber optic cable has broad potential applications, such as geomechanical monitoring in underground mines, surface pits, large civil infrastructure projects, and deep subsurface wellbores. The benefits of fiber optic sensing, such as the intrinsic safety of the sensors, the long sensing range, and real time capabilities make this a compelling technique for long term structural health monitoring (SHM) in a wide range of industrial and civil applications.

High-resolution slow-light fiber Bragg grating temperature sensor with phase-sensitive detection.

This Letter reports a slow-light fiber Bragg grating (FBG) temperature sensor with a record temperature resolution of ∼0.3 m°C/√Hz, a drift of only ∼1 m°C over the typical duration of a measurement (∼30 s), and negligible self-heating. This sensor is particularly useful for applications requiring the detection of very small temperature changes, such as radiation-balanced lasers and the measurement of small absorptive losses using calorimetry. The sensor performance is demonstrated by measuring the heat generated in a pumped Yb-doped fiber. The sensor is also used to measure the slow-light FBG's very weak internal absorption loss (0.02 m-1), which is found to be only ∼2% of the total loss.