RESUMO
Matching crop varieties to their target use context and user preferences is a challenge faced by many plant breeding programs serving smallholder agriculture. Numerous participatory approaches proposed by CGIAR and other research teams over the last four decades have attempted to capture farmers' priorities/preferences and crop variety field performance in representative growing environments through experimental trials with higher external validity. Yet none have overcome the challenges of scalability, data validity and reliability, and difficulties in capturing socio-economic and environmental heterogeneity. Building on the strengths of these attempts, we developed a new data-generation approach, called triadic comparison of technology options (tricot). Tricot is a decentralized experimental approach supported by crowdsourced citizen science. In this article, we review the development, validation, and evolution of the tricot approach, through our own research results and reviewing the literature in which tricot approaches have been successfully applied. The first results indicated that tricot-aggregated farmer-led assessments contained information with adequate validity and that reliability could be achieved with a large sample. Costs were lower than current participatory approaches. Scaling the tricot approach into a large on-farm testing network successfully registered specific climatic effects of crop variety performance in representative growing environments. Tricot's recent application in plant breeding networks in relation to decision-making has (i) advanced plant breeding lines recognizing socio-economic heterogeneity, and (ii) identified consumers' preferences and market demands, generating alternative breeding design priorities. We review lessons learned from tricot applications that have enabled a large scaling effort, which should lead to stronger decision-making in crop improvement and increased use of improved varieties in smallholder agriculture.
RESUMO
BACKGROUND: Cassava utilization for food and/or industrial products depends on inherent properties of root dry matter content (DMC) and the starch fraction of amylose content (AC). Accordingly, in the present study, near-infrared reflectance spectroscopy (NIRS) models were developed to aid breeding and selection of DMC and AC as critical industrial traits taking care of root sample preparation and cassava germplasm diversity available in Uganda. RESULTS: Upon undertaking calibrations and cross-validations, best models were adopted for validation. DMC in calibration samples ranged from 20 to 45 g 100g-1 , whereas, for amylose content, it ranged from 14 to 33 g 100g-1 . In the validation set, average DMC was 29.5 g 100g-1 , whereas, for amylose content, it was 24.64 g 100g-1 . For DMC, a modified partial least square regression model had regression coefficients (R2 ) of 0.98 and 0.96, respectively, in the calibration and validation set. These were also associated with low bias (-0.018) and ratio of performance deviation that ranged from 4.7 to 5.0. In addition, standard error of prediction values ranged from 0.9 g 100g-1 to 1.06 g 100g-1 . For AC, the regression coefficient was 0.91 for the calibration set and 0.94 for the validation set. A bias equivalent to -0.03 and a ratio of performance deviation of 4.23 were observed. CONCLUSION: These findings confirm the robustness of NIRS in the estimation of dry matter content and amylose content in cassava roots and thus justify its use in routine cassava breeding operations. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
Efforts are underway to develop staple crops with improved levels of provitamin A carotenoids to help combat dietary vitamin A deficiency (VAD), which has afflicted the health of resource-poor people in the developing world. As a staple crop for more than 500 million people in sub-Saharan Africa, cassava enriched with provitamin A carotenoids could have a widespread nutritional impact. To this effect, 13 provitamin A clones were evaluated in a randomized complete block design in six environments to assess genotype by environment interaction (GEI) effects for total carotenoid (TCC) and dry matter content (DMC) in roots. Additive main effect and multiplicative interaction analysis showed significant variation among genotypes for TCC, DMC, fresh root weight and harvest index. Environmental effects were non-significant for TCC, but GEI effects were significantly large for all traits measured. There were significant temporal increments for all traits measured within 12 months after planting. TCC correlated negatively with DMC, illustrating an important challenge to overcome when developing provitamin A cassava varieties without compromising DMC, which is a major farmer-preference trait. Nonetheless, best performing genotypes were identified for TCC, DMC and FRW, and these could constitute genetic resources for advancement or developing breeding populations through hybridization.
RESUMO
Global efforts are underway to biofortify cassava (Manihot esculenta Crantz) with provitamin A carotenoids to help combat dietary vitamin A deficiency afflicting the health of more than 500 million resource-poor people in Sub-Saharan Africa. To further the biofortification initiative in Uganda, a 6×6 diallel analysis was conducted to estimate combining ability of six provitamin A clones and gene actions controlling total carotenoid content (TCC), dry matter content (DMC) in cassava roots and other relevant traits. Fifteen F1 families generated from the diallel crosses were evaluated in two environments using a randomized complete block design. General combining ability (GCA) effects were significant for TCC and DMC, suggesting the relative importance of additive gene effects in controlling these traits in cassava. On the other hand, non-additive effects were predominant for root and shoot weight. MH02-073HS, with the highest level of TCC, was the best general combiner for TCC while NASE 3, a popular white-fleshed variety grown by farmers in Uganda, was the best general combiner for DMC. Such progenitors with superior GCA effects could form the genetic source for future programs targeting cassava breeding for TCC and DMC. A negative correlation was observed between TCC and DMC, which will require breeding strategies to combine both traits for increased adoption of provitamin A cassava varieties.
RESUMO
Cassava (Manihot esculenta Crantz) production is currently under threat from cassava brown streak disease (CBSD), a disease that is among the seven most serious obstacles to world's food security. Three issues are of significance for CBSD. Firstly, the virus associated with CBSD, has co-evolved with cassava outside its center of origin for at least 90 years. Secondly, that for the last 74 years, CBSD was only limited to the low lands. Thirdly, that most research has largely focused on CBSD epidemiology and virus diversity. Accordingly, this paper focuses on CBSD genetics and/or breeding and hence, presents empirical data generated in the past 11 years of cassava breeding in Uganda. Specifically, this paper provides: 1) empirical data on CBSD resistance screening efforts to identify sources of resistance and/or tolerance; 2) an update on CBSD resistance population development comprising of full-sibs, half-sibs and S1 families and their respective field performances; and 3) insights into chromosomal regions and genes involved in CBSD resistance based on genome wide association analysis. It is expected that this information will provide a foundation for harmonizing on-going CBSD breeding efforts and consequently, inform the future breeding interventions aimed at combating CBSD.
RESUMO
Flowering in cassava (Manihot esculenta Crantz) is crucial for the generation of botanical seed for breeding. However, genotypes preferred by most farmers are erect and poor at flowering or never flower. To elucidate the genetic basis of flowering, 293 diverse cassava accessions were evaluated for flowering-associated traits at two locations and seasons in Uganda. Genotyping using the Diversity Array Technology Pty Ltd. (DArTseq) platform identified 24,040 single-nucleotide polymorphisms (SNPs) distributed on the 18 cassava chromosomes. Population structure analysis using principal components (PCs) and kinships showed three clusters; the first five PCs accounted for 49.2% of the observed genetic variation. Linkage disequilibrium (LD) estimation averaged 0.32 at a distance of ~2850 kb (kilo base pairs). Polymorphism information content (PIC) and minor allele frequency (MAF) were 0.25 and 0.23, respectively. A genome-wide association study (GWAS) analysis uncovered 53 significant marker-trait associations (MTAs) with flowering-associated traits involving 27 loci. Two loci, SNPs S5_29309724 and S15_11747301, were associated with all the traits. Using five of the 27 SNPs with a Phenotype_Variance_Explained (PVE) ≥ 5%, 44 candidate genes were identified in the peak SNP sites located within 50 kb upstream or downstream, with most associated with branching traits. Eight of the genes, orthologous to Arabidopsis and other plant species, had known functional annotations related to flowering, e.g., eukaryotic translation initiation factor and myb family transcription factor. This study identified genomic regions associated with flowering-associated traits in cassava, and the identified SNPs can be useful in marker-assisted selection to overcome hybridization challenges, like unsynchronized flowering, and candidate gene validation.
RESUMO
Understanding pollen and ovule fertility as factors influencing fruit and seed set is important in cassava breeding. Extended daylength with red light (RL) and plant growth regulators (PGRs) have been used to induce flowering and fruit set in cassava without any reference to effects on pollen viability or ovule fertilizability. This study investigated the effects of field-applied RL and PGR on pollen viability and ovule fertilizability. Panels of cassava genotypes with early or moderate flowering responses were used. RL was administered from dusk to dawn. Two PGRs, 6-benzyl adenine (BA), a cytokinin and silver thiosulphate (STS), an anti-ethylene, were applied. Pollen viability was assessed based on pollen grain diameter, in vitro stainability, in vivo germinability, ovule fertilizability, and ploidy level. Treating flowers with RL increased the pollen diameter from 145.6 in control to 148.5 µm in RL, 78.5 to 93.0% in stainability, and 52.0 to 56.9% in ovule fertilizability in treated female flowers. The fruit set also increased from 51.5 in control to 71.8% in RL-treated female flowers. The seed set followed a similar trend. The ploidy level of pollen from RL-treated flowers increased slightly and was positively correlated with pollen diameter (R2 = 0.09 *), ovule fertilization (R2 = 0.20 *), fruit set (R2 = 0.59 *), and seed set (R2 = 0.60 *). Treating flowers with PGR did not affect pollen diameter but increased stainability from 78.5% in control to 82.1%, ovule fertilizability from 42.9 to 64.9%, and fruit set from 23.2 to 51.9% in PGR-treated female flowers. Combined BA + STS application caused the highest ovule fertilizability, fruit, and seed set efficiency. These results show that RL and PGR treatments increase pollen viability and ovule fertilizability. This is important for planning pollination strategies in cassava breeding programmes.
RESUMO
Breeding for low-hydrogen-cyanide (HCN) varieties is a major objective of programs targeting boiled cassava food products. To enhance the breeding of low-HCN varieties, knowledge of genetic variation and trait heritability is essential. In this study, 64 cassava clones were established across four locations and evaluated for HCN using three HCN assessment methods: one with a 1 to 9 scale, on with a 0 ppm to 800 ppm scale, and a quantitative assay based on spectrophotometer readings (HCN_Spec). Data were also collected on the weather variables precipitation, relative humidity, and temperature. Highly significant differences were observed among clones (p < 0.001) and locations (p < 0.001). There was also significant clone-environment interactions, varying from p < 0.05 to p < 0.001. Locations Arua and Serere showed higher HCN scores among clones and were associated with significantly higher (p < 0.001) mean daily temperatures (K) and lower relative humidity values (%) across 12 h and 18 h intervals. Within locations, HCN broad sense heritability estimates ranged from 0.22 to 0.64, while combined location heritability estimates ranged from 0.14 to 0.32. Relationships between the methods were positive and strong (r = 0.75-0.92). The 1 to 9 scale is more accurate and more reproducible than either the 0 to 800 ppm scale or spectrophotometric methods. It is expected that the information herein will accelerate efforts towards breeding for low-HCN cassava varieties.
RESUMO
Assessing the genetic diversity of yam germplasm from different geographical origins for cultivation and breeding purposes is an essential step for crop genetic resource conservation and genetic improvement, especially where the crop faces minimal attention. This study aimed to classify the population structure, and assess the extent of genetic diversity in 207 Dioscorea rotundata genotypes sourced from three different geographical origins. A total of 4,957 (16.2%) single nucleotide polymorphism markers were used to assess genetic diversity. The SNP markers were informative, with polymorphic information content ranging from 0.238 to 0.288 and a mean of 0.260 across all the genotypes. The observed and expected heterozygosity was 0.12 and 0.23, respectively while the minor allele frequency ranged from 0.093 to 0.124 with a mean of 0.109. The principal coordinate analysis, model-based structure and discriminant analysis of principal components, and the Euclidean distance matrix method grouped 207 yam genotypes into three main clusters. Genotypes from West Africa (Ghana and Nigeria) had significant similarities with those from Uganda. Analysis of molecular variance revealed that within-population variation across three different geographical origins accounted for 93% of the observed variation. This study, therefore, showed that yam improvement in Uganda is possible, and the outcome will constitute a foundation for the genetic improvement of yams in Uganda.
Assuntos
Dioscorea , Dioscorea/genética , Filogenia , Variação Genética , Uganda , Melhoramento Vegetal , GanaRESUMO
This study focuses on meeting end-users' demand for cassava (Manihot esculenta Crantz) varieties with low cyanogenic potential (hydrogen cyanide potential [HCN]) by using near-infrared spectrometry (NIRS). This technology provides a fast, accurate, and reliable way to determine sample constituents with minimal sample preparation. The study aims to evaluate the effectiveness of machine learning (ML) algorithms such as logistic regression (LR), support vector machine (SVM), and partial least squares discriminant analysis (PLS-DA) in distinguishing between low and high HCN accessions. Low HCN accessions averagely scored 1-5.9, while high HCN accessions scored 6-9 on a 1-9 categorical scale. The researchers used 1164 root samples to test different NIRS prediction models and six spectral pretreatments. The wavelengths 961, 1165, 1403-1505, 1913-1981, and 2491 nm were influential in discrimination of low and high HCN accessions. Using selected wavelengths, LR achieved 100% classification accuracy and PLS-DA achieved 99% classification accuracy. Using the full spectrum, the best model for discriminating low and high HCN accessions was the PLS-DA combined with standard normal variate with second derivative, which produced an accuracy of 99.6%. The SVM and LR had moderate classification accuracies of 75% and 74%, respectively. This study demonstrates that NIRS coupled with ML algorithms can be used to identify low and high HCN accessions, which can help cassava breeding programs to select for low HCN accessions.
RESUMO
Introduction: The intrinsic high heterozygosity of cassava makes conventional breeding ineffective for rapid genetic improvement. However, recent advances in next generation sequencing technologies have enabled the use of high-density markers for genome-wide association studies, aimed at identifying single nucleotide polymorphisms (SNPs) linked to major traits such as cassava mosaic disease (CMD) resistance, dry matter content (DMC) and total carotenoids content (TCC). A number of these trait-linked SNPs have been converted to Kompetitive allele-specific polymerase chain reaction (KASP) markers for downstream application of marker assisted selection. Methods: We assayed 13 KASP markers to evaluate their effectiveness in selecting for CMD, DMC and TCC in 1,677 diverse cassava genotypes representing two independent breeding populations in Uganda. Results: Five KASP markers had significant co-segregation with phenotypes; CMD resistance (2), DMC (1) and TCC (2), with each marker accounting for at least 30% of the phenotypic variation. Markers located within the chromosomal regions for which strong marker-trait association loci have been characterised (chromosome 12 markers for CMD, chromosome 1 markers for DMC and TCC) had consistently superior ability to discriminate the respective phenotypes. Discussion: The results indicate varying discriminatory abilities of the KASP markers assayed and the need for their context-based use for MAS, with PSY2_572 particularly effective in selecting for high TCC. Availing the effective KASP markers on cost-effective genotyping platforms could facilitate practical implementation of marker-assisted cassava breeding for accelerated genetic gains for CMD, DMC and provitamin A carotenoids.
RESUMO
Cassava (Manihot esculenta Crantz) is a staple crop for ~800 million people in sub-Saharan Africa. Its production and productivity are being heavily affected by the two viral diseases: cassava brown streak disease (CBSD) and cassava mosaic disease (CMD), impacting greatly on edible root yield. CBSD is currently endemic to central, eastern and southern Africa, if not contained could spread to West Africa the largest cassava producer and consumer in the continent. Genomic selection (GS) has been implemented in Ugandan cassava breeding for accelerated development of virus resistant and high yielding clones. This study leveraged available GS training data in Uganda for pre-emptive CBSD breeding in W. Africa alongside CMD and fresh root yield (FRW). First, we tracked genetic gain through the current three cycles of GS in Uganda. The mean genomic estimated breeding values (GEBVs), indicated general progress from initial cycle zero (C0) to cycle one (C1) and cycle two (C2) for CBSD traits and yield except for CMD. Secondly, we used foliar data of both CBSD and CMD, as well as harvest root necrosis and yield data to perform cross-validation predictions. Cross-validation prediction accuracies of five GS models were tested for each of the three GS cycles and West African (WA) germplasm as a test set. In all cases, cross-validation prediction accuracies were low to moderate, ranging from -0.16 to 0.68 for CBSD traits, -0.27 to 0.57 for CMD and -0.22 to 0.41 for fresh root weight (FRW). Overall, the highest prediction accuracies were recorded in C0 for all traits tested across models and the best performing model in cross-validation was G-BLUP. Lastly, we tested the predictive ability of the Ugandan training sets to predict CBSD in W. African clones. In general, the Ugandan training sets had low prediction accuracies for all traits across models in West African germplasm, varying from -0.18 to 0.1. Based on the findings of this study, the cassava breeding program in Uganda has made progress through application of GS for most target traits, but the utility of the training population for pre-emptive breeding in WA is limiting. In this case, efforts should be devoted to sharing Ugandan germplasm that possess resistance with the W. African breeding programs for hybridization to fully enable deployment of genomic selection as a pre-emptive CBSD breeding strategy in W. Africa.
RESUMO
Cassava mosaic disease (CMD) suppresses cassava yields across the tropics. The dominant CMD2 locus confers resistance to cassava mosaic geminiviruses. It has been reported that CMD2-type landraces lose resistance after regeneration through de novo morphogenesis. As full genome bisulfite sequencing failed to uncover an epigenetic mechanism for this loss of resistance, whole genome sequencing and genetic variant analysis was performed and the CMD2 locus was fine-mapped to a 190 kilobase interval. Collectively, these data indicate that CMD2-type resistance is caused by a nonsynonymous, single nucleotide polymorphism in DNA polymerase δ subunit 1 (MePOLD1) located within this region. Virus-induced gene silencing of MePOLD1 in a CMD-susceptible cassava variety produced a recovery phenotype typical of CMD2-type resistance. Analysis of other CMD2-type cassava varieties identified additional candidate resistance alleles within MePOLD1. Genetic variation of MePOLD1, therefore, could represent an important genetic resource for resistance breeding and/or genome editing, and elucidating mechanisms of resistance to geminiviruses.
Assuntos
Begomovirus , Geminiviridae , Manihot , DNA Polimerase III/genética , Resistência à Doença/genética , Geminiviridae/genética , Manihot/genética , Mutação , Melhoramento Vegetal , Doenças das Plantas/genéticaRESUMO
Modern breeding methods integrate next-generation sequencing and phenomics to identify plants with the best characteristics and greatest genetic merit for use as parents in subsequent breeding cycles to ultimately create improved cultivars able to sustain high adoption rates by farmers. This data-driven approach hinges on strong foundations in data management, quality control, and analytics. Of crucial importance is a central database able to (1) track breeding materials, (2) store experimental evaluations, (3) record phenotypic measurements using consistent ontologies, (4) store genotypic information, and (5) implement algorithms for analysis, prediction, and selection decisions. Because of the complexity of the breeding process, breeding databases also tend to be complex, difficult, and expensive to implement and maintain. Here, we present a breeding database system, Breedbase (https://breedbase.org/, last accessed 4/18/2022). Originally initiated as Cassavabase (https://cassavabase.org/, last accessed 4/18/2022) with the NextGen Cassava project (https://www.nextgencassava.org/, last accessed 4/18/2022), and later developed into a crop-agnostic system, it is presently used by dozens of different crops and projects. The system is web based and is available as open source software. It is available on GitHub (https://github.com/solgenomics/, last accessed 4/18/2022) and packaged in a Docker image for deployment (https://hub.docker.com/u/breedbase, last accessed 4/18/2022). The Breedbase system enables breeding programs to better manage and leverage their data for decision making within a fully integrated digital ecosystem.
Assuntos
Ecossistema , Melhoramento Vegetal , Algoritmos , Produtos Agrícolas/genética , SoftwareRESUMO
Cassava production and productivity in Eastern, Central, and Southern Africa are ravaged by cassava brown streak disease (CBSD), causing yield losses of up to 100% when susceptible varieties are grown. Efforts to develop CBSD-resistant clones are underway. However, the methods for screening CBSD resistance currently vary between breeders and pathologists, with the limited empirical data to support their choices. In this study, we used the empirical CBSD foliar and root necrosis data from two breeding populations, termed cycle zero (C0) and cycle one (C1), to assess and compare the effectiveness of the CBSD screening methods of breeders vs. pathologists. On the one hand, the estimates of broad-sense heritability (H 2) for the CBSD root necrosis assessment of breeder ranged from 0.15 to 0.87, while for the assessment method of pathologists, H 2 varied from 0.00 to 0.71 in C0 clones. On the other hand, the marker-based heritability estimates (h 2) for C0 ranged from 0.00 to 0.70 for the assessment method of breeders and from 0.00 to 0.63 for the assessment method of pathologists. For cycle one (C1) population, where both foliar and root necrosis data were analyzed for clones assessed at clonal evaluation trials (CETs) and advanced yield trials (AYTs), H 2 varied from 0.10 to 0.59 for the assessment method of breeders, while the H 2 values ranged from 0.09 to 0.35 for the CBSD computation method of pathologists. In general, higher correlations were recorded for foliar severity from the assessment method of breeders (r = 0.4, p ≤ 0.01 for CBSD3s and r = 0.37, p ≤ 0.01 for CBSD6s) in C1 clones evaluated at both clonal and advanced breeding stages than from the approach of pathologists. Ranking of top 10 C1 clones by their indexed best linear unbiased predictors (BLUPs) for CBSD foliar and root necrosis showed four overlapping clones between clonal and advanced selection stages for the method of breeders; meanwhile, only a clone featured in both clonal and advanced selection stages from the CBSD assessment method of pathologists. Overall, the CBSD assessment method of breeders was more effective than the assessment method of pathologists, and thus, it justifies its continued use in CBSD resistance breeding.
RESUMO
Global efforts are underway to develop cassava with enhanced levels of provitamin A carotenoids to sustainably meet increasing demands for food and nutrition where the crop is a major staple. Herein, we tested the effectiveness of genomic selection (GS) for rapid improvement of cassava for total carotenoids content and associated traits. We evaluated 632 clones from Uganda's provitamin A cassava breeding pipeline and 648 West African introductions. At harvest, each clone was assessed for level of total carotenoids, dry matter content, and resistance to cassava brown streak disease (CBSD). All clones were genotyped with diversity array technology and imputed to a set of 23,431 single nucleotide polymorphic markers. We assessed predictive ability of four genomic prediction methods in scenarios of cross-validation, across population prediction, and inclusion of quantitative trait loci markers. Cross-validations produced the highest mean prediction ability for total carotenoids content (0.52) and the lowest for CBSD resistance (0.20), with G-BLUP outperforming other models tested. Across population, predictions showed low ability of Ugandan population to predict the performance of West African clones, with the highest predictive ability recorded for total carotenoids content (0.34) and the lowest for CBSD resistance (0.12) using G-BLUP. By incorporating chromosome 1 markers associated with carotenoids content as independent kernel in the G-BLUP model of a cross-validation scenario, prediction ability slightly improved from 0.52 to 0.58. These results reinforce ongoing efforts aimed at integrating GS into cassava breeding and demonstrate the utility of this tool for rapid genetic improvement.
Assuntos
Manihot , Carotenoides , Genômica , Manihot/genética , Melhoramento Vegetal , ProvitaminasRESUMO
Achieving food security for an ever-increasing human population requires faster development of improved varieties. To this end, assessment of genetic gain for key traits is important to inform breeding processes. Despite the improvements made to increase production and productivity of cassava in Uganda at research level, there has been limited effort to quantify associated genetic gains. Accordingly, a study was conducted in Uganda to assess whether or not genetic improvement was evident in selected cassava traits using cassava varieties that were released from 1940 to 2019. Thirty-two varieties developed during this period, were evaluated simultaneously in three major cassava production zones; central (Namulonge), eastern (Serere), and northern (Loro). Best linear unbiased predictors (BLUPs) of the genotypic value for each clone were obtained across environments and regressed on order of release year to estimate annual genetic gains. We observed that genetic trends were mostly quadratic. On average, cassava mosaic disease (CMD) resistance increased by 1.9% per year, while annual genetic improvements in harvest index (0.0%) and fresh root yield (-5 kg per ha or -0.03% per ha) were non-substantial. For cassava brown streak disease (CBSD) resistance breeding which was only initiated in 2003, average annual genetic gains for CBSD foliar and CBSD root necrosis resistances were 2.3% and 1.5%, respectively. It's evident that cassava breeding has largely focused on protecting yield against diseases. This underpins the need for simultaneous improvement of cassava for disease resistance and high yield for the crop to meet its current and futuristic demands for food and industry.
RESUMO
Cassava breeding programmes in Uganda do not currently select materials based on flour making quality, explaining in part the low adoption rates of many released varieties. In this study, we describe end user trait preferences, processing qualities and physicochemical properties of cassava flour. We found that higher proportion of women than men showed preference for most attributes of cassava flour quality evaluated in this study. Preference for colour was 66% and 52% among women and men, respectively, while that for stickiness of Kwon was 26% (women) and 15% (men). Ease of peeling and stickiness of Kwon were key processing traits. Heap fermented flour had higher pasting temperatures, but lower viscosities than sun-dried flour, and had lower amylose content compared to fresh root starch. The results demonstrate the importance of gender sensitive participatory evaluation of breeding materials, in tandem with physicochemical evaluation during selection of best possible candidate breeding lines.
RESUMO
Cassava, a food security crop in Africa, is grown throughout the tropics and subtropics. Although cassava can provide high productivity in suboptimal conditions, the yield in Africa is substantially lower than in other geographies. The yield gap is attributable to many challenges faced by cassava in Africa, including susceptibility to diseases and poor soil conditions. In this study, we carried out 3'RNA sequencing on 150 accessions from the National Crops Resources Research Institute, Uganda for 5 tissue types, providing population-based transcriptomics resources to the research community in a web-based queryable cassava expression atlas. Differential expression and weighted gene co-expression network analysis were performed to detect 8820 significantly differentially expressed genes (DEGs), revealing similarity in expression patterns between tissue types and the clustering of detected DEGs into 18 gene modules. As a confirmation of data quality, differential expression and pathway analysis targeting cassava mosaic disease (CMD) identified 27 genes observed in the plant-pathogen interaction pathway, several previously identified CMD resistance genes, and two peroxidase family proteins different from the CMD2 gene. Present research work represents a novel resource towards understanding complex traits at expression and molecular levels for the development of resistant and high-yielding cassava varieties, as exemplified with CMD.
Assuntos
Resistência à Doença/genética , Expressão Gênica/genética , Manihot/genética , Produtos Agrícolas/genética , Interações Hospedeiro-Patógeno/genética , Fenótipo , Doenças das Plantas/genética , Transcriptoma/genética , UgandaRESUMO
Cassava brown streak disease (CBSD) caused by the rapidly evolving cassava brown streak viruses (CBSVs), causes immense yield losses to the cassava value chain in eastern and southern Africa. Western Africa, another region that heavily depends on cassava is under eminent threat from CBSD. Resistance breeding is the best practical solution. However, complexities associated with CBSD resistance screening i.e., variable root sampling units, limit systematic attainment of genetic progress. Accordingly, we compared efficiency of five CBSD root necrosis assessment methods to guide selection: cassava brown streak disease root incidence (CBSDRi), cassava brown streak disease root severity (CBSDRs), cassava brown streak disease root severity computed as harmonic mean (CBSD-Harmonic), proportion-based root necrosis index (CBSD-proportion), and standardized root necrosis index (CBSD-standardized). The indexes (CBSD-proportion and CBSD-standardized) correct for variable sample size. We analyzed CBSD root necrosis data of 256 clones evaluated across 12 environments. Higher and variable standard errors were associated with root severity score 1 (no CBSD root necrosis). Lowest and highest plot-based heritability were respectively registered for CBSD-standardized (0.22) and CBSD-proportion (0.71). CBSDRs was only positively correlated with CBSDRi (r = 0.92) and CBSD-Harmonic (r = 0.97). Using best linear unbiased predictions (BLUPs), we ranked the top 15 CBSD resistant clones; only one clone (UG130014) featured in all the five assessment methods; two clones (UG130006 and UG120156) featured in four (CBSD-Harmonic, CBSDRi, CBSDRs, and CBSD-standardized); and five clones (UG120180, UG120063, UG130002, UG130033, and UG120183) featured in three methods (CBSD-Harmonic, CBSDRi, and CBSDRs). Influence of sample size was also quantified by sub-setting and analyzing CBSDRs data to have plots with at least 40 or 30 roots. Data stabilization was evident in plots with 30 roots. The significant influence of root sample sizes on overall ranking of clones, justifies the use of CBSD root necrosis indexes in early selection stages i.e., seedling and/or clonal trials, that are often characterized by high variations in roots assessed per plot. It is expected that this information will provide a foundation for harmonizing and/or optimizing on-going and future CBSD resistance breeding efforts.