Enhancing urban blue-green landscape quality assessment through hybrid genetic algorithm-back propagation (GA-BP) neural network approach: a case study in Fucheng, China.

This study employs an artificial neural network optimization algorithm, enhanced with a Genetic Algorithm-Back Propagation (GA-BP) network, to assess the service quality of urban water bodies and green spaces, aiming to promote healthy urban environments. From an initial set of 95 variables, 29 key variables were selected, including 17 input variables, such as water and green space area, population size, and urbanization rate, six hidden layer neurons, such as patch number, patch density, and average patch size, and one output variable for the comprehensive value of blue-green landscape quality. The results indicate that the GA-BP network achieves an average relative error of 0.94772%, which is superior to the 1.5988% of the traditional BP network. Moreover, it boasts a prediction accuracy of 90% for the comprehensive value of landscape quality from 2015 to 2022, significantly outperforming the BP network's approximate 70% accuracy. This method enhances the accuracy of landscape quality assessment but also aids in identifying crucial factors influencing quality. It provides scientific and objective guidance for future urban landscape structure and layout, contributing to high-quality urban development and the creation of exemplary living areas.

Ultrasound-guided needle release of A1 pulley combined with corticosteroid injection is more effective than ultrasound-guided needle release alone in the treatment of trigger finger.

BACKGROUND: The purpose of the present study was to evaluate the clinical effectiveness of ultrasonography-guided needle release of A1 pulley combined with corticosteroid injection by comparing it with ultrasound-guided needle release of the A1 pulley alone. METHODS: A total of 49 patients (55 fingers, thumb) with trigger fingers were included in this retrospective study. Twenty-seven fingers were treated with ultrasound-guided needle release of the A1 pulley alone (monotherapy group), and 28 fingers were treated with needle release of the A1 pulley combined with corticosteroid injection (combination group). Visual analog scale (VAS), Froimson scale, postoperative recurrence rate, and thickness of A1 pulley at baseline, Week-2, Week-12, and Month-6 were recorded. RESULTS: Higher clinical cure rates were observed in the combination group at Week-2 after treatment among patients with the Froimson scale Grade III and IV (p < 0.05). Among Froimson scale Grade IV patients, the combination group had a significantly thinner thickness of A1 pulley and better articular pain relief at Week-2 (all p < 0.05). No significant differences were found in the clinical cure rate, the thickness of the A1 pulley, articular pain relief, and recurrence rate between the two groups at Week-12 and Month-6 (all p > 0.05). CONCLUSIONS: Ultrasonography-guided needle release of A1 pulley plus corticosteroid injection was superior to ultrasonography-guided A1 pulley needle release alone during early-stage treatment of severe patients with trigger fingers. Moreover, ultrasonography-guided A1 pulley needle release combined with corticosteroid injection narrows the thickness of the A1 pulley. It is necessary to carry out preoperative evaluation and individualized treatment for patients of various severities.

Comparison of the clinical effectiveness of ultrasound-guided corticosteroid injection with and without needle release of the A1 pulley in treating trigger finger.

OBJECTIVE: To compare the clinical effectiveness of ultrasound-guided corticosteroid injection with and without needle release of the A1 pulley in treating trigger finger. METHODS: A total of 60 patients with trigger finger were enrolled in this retrospective study. Among them, 30 patients were treated with ultrasound-guided needle release of the A1 pulley with corticosteroid injection (group A) and 30 patients were treated with single ultrasound-guided corticosteroids injection (group B). The following parameters were evaluated including clinical parameters (pain degree, function of joint, finger tendon function, postoperative satisfaction), and ultrasound parameter (thickness of A1 pulley). RESULTS: The postoperative visual analogue scale (VAS) and Quinnell scores in two groups were significantly lower than that before operation (p < 0.05). The postoperative Quinnell score of group A was significantly lower than that in group B (p < 0.05). The TAM results showed that the postoperative overall excellent and good rate of group A was significantly higher than that in group B (p < 0.05). The postoperative survey showed that more than 80% patients reported satisfaction in the two groups. The ultrasound imaging results showed that the postoperative thickness of A1 pulley in two groups were thinner than that before operation (p < 0.05). There were no adverse effects and complications in the two groups. CONCLUSIONS: Both approaches had treatment benefit in trigger finger. Ultrasound-guided needle release of the A1 pulley with corticosteroid injection had better treatment benefits than single ultrasound-guided corticosteroids injection in improving finger tendon function and joint function.

Antidepressant-Like Effect of Isorhynchophylline in Mice.

Isorhynchophylline (IRN), an oxindole alkaloid, has been identified as the main active ingredient responsible for the biological activities of Uncaria rhynchophylla (Miq) Miq ex Havil. (Rubiaceae). Previous studies in our laboratory have revealed that IRN possesses potent neuroprotective effects in different models of Alzheimer's disease. However, the antidepressant-like effects of IRN are remained unclear. The present study aims to evaluate the antidepressant-like effects of IRN. The antidepressant-like effects of IRN was determined by using animal models of depression including forced swimming and tail suspension tests. The acting mechanism was explored by determining the effect of IRN on the levels of monoamine neurotransmitters and the activities of monoamine oxidases. Intragastric administration of IRN at 10, 20 and 40 mg/kg for 7 days caused a significant reduction of immobility time in both forced swimming and tail suspension tests, while IRN did not stimulate locomotor activity in the open-field test. In addition, IRN treatment antagonized reserpine-induced ptosis and significantly enhanced the levels of monoamine neurotransmitters including norepinephrine (NE) and 5-hydroxytryptamine (5-HT), and the activity of monoamine oxidase A (MAO-A) in the hippocampus and frontal cortex of mice. These results suggest that the antidepressant-like effects of IRN are mediated, at least in part, by the inhibition of monoamine oxidases.

Comparison of the Clinical Effectiveness of Ultrasound-Guided Corticosteroid Injection with and without Needle Release of the Transverse Carpal Ligament in Carpal Tunnel Syndrome.

BACKGROUND: To compare the clinical effectiveness of ultrasound-guided corticosteroid injection with and without needle release of the transverse carpal ligament (TCL) in carpal tunnel syndrome (CTS). METHODS: Between May 2014 and June 2016, 52 patients (56 wrists) with CTS were included in this study. Among these patients, 28 wrists were treated with ultrasound-guided corticosteroid injection plus needle release of the TCL (group A) and 28 wrists were treated with a single ultrasound-guided corticosteroids injection (group B). The following parameters were assessed and compared including postoperative results of procedure based on relief of symptoms, electrophysiological parameters (distal motor latency, sensory conduction velocity, and sensory nerve action potential of median nerve), and ultrasound parameters (anteroposterior diameter and cross-sectional area of the median nerve at the levels of pisiform and hamate bone, and the thicknesses of TCL on the cross-section at the level of hamate bone). RESULTS: The overall excellent and good rate regarding the postoperative results of procedure based on the relief of symptoms at 1 month postoperatively was 82.1% in group A and 46.4% in group B (p = 0.004). There was significant difference in the above electrophysiological and ultrasound parameters between the preoperative and postoperative values in both groups (all p < 0.05). Furthermore, a significant difference was also observed in the postoperative values of the above-mentioned electrophysiological and ultrasound parameters in the 2 groups (all p < 0.05). CONCLUSIONS: Both approaches had treatment benefit in CTS. Ultrasound-guided corticosteroid injection in combination with needle release of the TCL is superior to the single ultrasound-guided corticosteroids injection.

[Application status of rapid prototyping technology in artificial bone based on reverse engineering].

Artificial bone replacement has made an important contribution to safeguard human health and improve the quality of life. The application requirements of rapid prototyping technology based on reverse engineering in individualized artificial bone with individual differences are particularly urgent. This paper reviewed the current research and applications of rapid prototyping and reverse engineering in artificial bone. The research developments and the outlook of bone kinematics and dynamics simulation are also introduced.

Investigating the Forming Characteristics of 316 Stainless Steel Fabricated through Cold Metal Transfer (CMT) Wire and Arc Additive Manufacturing.

Wire and arc additive manufacturing (WAAM), recognized for its capability to fabricate large-scale, complex parts, stands out due to its significant deposition rates and cost-effectiveness, positioning it as a forward-looking manufacturing method. In this research, we employed two welding currents to produce samples of 316 austenitic stainless steel utilizing the Cold Metal Transfer wire arc additive manufacturing process (CMT-WAAM). This study initially evaluated the maximum allowable arc travel speed (MAWFS) and the formation characteristics of the deposition bead, considering deposition currents that vary between 100 A and175 A in both CMT and CMT pulse(CMT+P) modes. Thereafter, the effect of the CMT+P mode arc on the microstructure evolution was analyzed using the EBSD technique. The findings indicate that the arc travel speed and deposition current significantly affect the deposition bead's dimensions. Specifically, an increase in travel speed or a reduction in current results in reduced bead width and height. Moreover, the employment of the CMT+P arc mode led to a reduction in the average grain size in the mid-section of the sample fabricated by CMT arc and wire additive manufacturing, from 13.426 µm to 9.429 µm. Therefore, the components of 316 stainless steel produced through the CMT+P-WAAM method are considered fit for industrial applications.

Experimental investigation of dynamic drying in single pharmaceutical granules containing acetaminophen or carbamazepine using synchrotron X-ray micro computed tomography.

Drying time, velocity, and temperature are important aspects of the drying process for pharmaceutical granules observed during tablet manufacturing. However, the drying mechanism of single granules is often limited to modelling and simulation, with the internal and physical changes difficult to quantify at an experimental level. In this study, in-situ synchrotron-based X-ray imaging techniques were used for the first time to investigate the dynamic drying of single pharmaceutical granules, quantifying internal changes occurring over the drying time. Two commonly used excipients (lactose monohydrate (LMH) and microcrystalline cellulose (MCC)) were used as pure components and binary mixtures with one of either two active pharmaceutical ingredients of differing hydrophilicity/hydrophobicity (acetaminophen (APAP) and carbamazepine (CBZ)). Water was used as a liquid binder to generate single granules of 25 % to 30 % moisture content. Results showed that for most samples, the drying time and composition significantly influences the pore volume evolution and the moisture ratio, with the velocity and temperature of the drying air possessing mixed significance on increasing the rate of pore connectivity and moisture removal depending on the sample composition. Effects of active ingredient loading resulted in minimal influence on the drying of CBZ and generated binary mixtures, with APAP and its respective mixtures' drying behaviour dominated by the material's hydrophilic nature.

CM082 suppresses hypoxia-induced retinal neovascularization in larval zebrafish.

Retinal neovascularization is a common feature of several ocular neovascular diseases, which are the leading cause of blindness in the world. Current treatments are administered through invasive intravitreal injections, leading to poor patient compliance, serious ocular complications and heavy economic burdens. Thus, an alternative less or non-invasive therapeutic strategy is in demand. Here, a non-invasive oral tyrosine kinase inhibitor, CM082, was evaluated in a retinal neovascularization model induced by hypoxia in zebrafish larvae. We found that CM082 effectively suppressed retinal neovascularization, rescued cell loss in the retinal ganglion cell layer, and rescued the visual function deficiency. Our results elucidated that CM082 mediated its therapeutic efficacy primarily through the inhibition of Vegfr2 phosphorylation. The findings demonstrated that CM082 possessed strong antiangiogenic effects and may serve as a potential treatment for angiogenesis in ocular neovascular diseases.

Sophoricoside ameliorates cerebral ischemia-reperfusion injury dependent on activating AMPK.

AIMS: Ischemic stroke accounts for 87% of all strokes, and its death and disability bring a huge burden to society. Brain injury caused by ischemia-reperfusion (I/R) is also a major difficulty in clinical treatment and prognosis. Sophoricoside (SOP) is an isoflavone glycoside isolated from the seed of medical herb Sophora japonica L. Previously, SOP was found to be effective in anti-inflammation and glucose-lipid metabolism-related diseases. In order to investigate whether SOP has a regulatory effect on cerebral I/R injury, we conducted this study. METHODS: Here, by application of SOP into MCAO (transient middle cerebral artery occlusion)-induced mice and OGD/R (oxygen glucose deprivation/reperfusion)-induced primary neurons, the regulation effects of SOP was analyzed by detecting neurological score of post-stroke mice, phenotypes of brains and brain sections, cell viabilities, and apoptosis- and inflammation-regulation. RNA sequencing and molecular biology experiments were performed to explore the mechanism of SOP regulating cerebral I/R injury. RESULTS: SOP administration decreased the infarct size, neurological deficit score, neuronal cell injury, inflammation and apoptosis. Mechanistically, SOP exerted its protective effect by activating the AMP-activated protein kinase (AMPK) signaling pathway. CONCLUSION: SOP inhibits cerebral I/R injury by promoting the phosphorylation of AMPK.

Homeostatic Measure of Insulin Resistance Is Associated With Future Asthma Exacerbations: A 1-Year Prospective Cohort Study.

BACKGROUND: Recent evidence suggests that insulin resistance affects asthma outcomes. However, the effect of the homeostatic measure of insulin resistance (HOMA-IR) on airway inflammation and asthma exacerbations (AEs) is poorly understood. OBJECTIVE: To analyze the relationship between HOMA-IR and clinical and inflammatory characteristics in patients with asthma, and the association between HOMA-IR and AEs in the following year. METHODS: A prospective cohort study recruited participants with asthma, who were classified into the HOMA-IRhigh group and HOMA-IRlow group based on the cutoff value of 3.80 for HOMA-IR and were observed within 12 months. We evaluated the clinical and inflammatory features and conducted a 1-year follow-up to study the exacerbations. We used negative binomial regression models to analyze the association between HOMA-IR and AEs. RESULTS: Compared with patients in the HOMA-IRlow group (n = 564), those in the HOMA-IRhigh group (n = 61) had higher levels of body mass index, a higher waist circumference and waist-hip ratio, higher triglycerides, lower cholesterol high-density lipoproteins, more neutrophils in the peripheral blood, and elevated IL-5 levels in the induced sputum. Furthermore, patients in the HOMA-IRhigh group had a significantly increased risk for moderate to severe AEs (adjusted incidence rate ratio [aIRR] = 2.26; 95% CI, 1.38-3.70), severe AEs (aIRR = 2.42; 95% CI, 1.26-4.67), hospitalization (aIRR = 2.54; 95% CI, 1.20-5.38), and emergency visits (aIRR = 3.04; 95% CI, 1.80-8.53). CONCLUSIONS: The homeostatic measure of insulin resistance was associated with asthma-related clinical features and airway inflammation, and was an independent risk factor for future AEs. Therefore, insulin resistance may have important implications for managing asthma as a potential treatable trait.

The Effect of B4C Powder on Properties of the WAAM 2319 Al Alloy.

With ER2319 and B4C powder as feedstocks and additives, respectively, a wire arc additive manufacturing (WAAM) system based on double-pulse melting electrode inert gas shielded welding (DP-MIG) was used to fabricate single-pass multilayer 2319 aluminum alloy. The results showed that, compared with additive manufacturing component without B4C, the addition of which can effectively reduce the grain size (from 43 µm to 25 µm) of the tissue in the deposited layer area and improve its mechanical properties (from 231 MPa to 286 MPa). Meanwhile, the mechanical properties are better in the transverse than in the longitudinal direction. Moreover, the strengthening mechanism of B4C on the mechanical properties of aluminum alloy additive manufacturing mainly includes dispersion strengthening from fine and uniform B4C granular reinforcing phases and fine grain strengthening from the grain refinement of B4C. These findings shed light on the B4C induced grain refinement mechanism and improvement of WAAM 2319 Al alloy.

Interaction effect of chronic cough and ageing on increased risk of exacerbation in patients with asthma: a prospective cohort study in a real-world setting.

Background: Older adults with asthma have the greatest burden and worst outcomes, and there is increasing evidence that chronic cough (CC) is associated with asthma severity and poor prognosis. However, the clinical characteristics of older adult patients with both asthma and CC remain largely unknown. Methods: Participants with stable asthma underwent two cough assessments within 3 months to define the presence of CC. Patients were divided into four groups based on CC and age (cut-off ≥60 years). Multidimensional assessment was performed at baseline, followed by a 12-month follow-up to investigate asthma exacerbations. Logistic regression models were used to explore the interaction effect of CC and age on asthma control and exacerbations. Results: In total, 310 adult patients were prospectively recruited and divided into four groups: older CC group (n=46), older non-CC group (n=20), younger CC group (n=112) and younger non-CC group (n=132). Compared with the younger non-CC group, the older CC group had worse asthma control and quality of life and increased airflow obstruction. The older CC group showed an increase in moderate-to-severe exacerbations during the 12-month follow-up. There was a significant interaction effect of CC and ageing on the increased moderate-to-severe exacerbations (adjusted risk ratio 2.36, 95% CI 1.47-3.30). Conclusion: Older asthma patients with CC have worse clinical outcomes, including worse asthma control and quality of life, increased airway obstruction and more frequent moderate-to-severe exacerbations, which can be partly explained by the interaction between CC and ageing.

The Growth Behavior for Intermetallic Compounds at the Interface of Aluminum-Steel Weld Joint.

In this work, the microstructure and growth behavior of Al-Fe intermetallic compounds (IMCs), which formed at interface of weld steel-aluminum joint, are successfully analyzed via the combination of experiment and physical model. A layer IMCs consists of Fe2Al5 and Fe4Al13, in which the Fe2Al5 is the main compound in the layer. The IMCs layer thickness increases with the increase of the heat input and the maximum thickness of IMCs layer is 22 ± 2 µm. The high vacancy concentration of Fe2Al5 IMCs provides the diffusion path for Al atoms to migrate through the IMCs layer for growing towards to steel substrate. By using the calculated temperature profiles as inputs, the combined 2D cellular automata (CA)-Monte Carlo (MC) model is applied to simulate the grain distribution and interfacial morphology evolution at the Al-steel interface. This 2D model simulates the IMCs nucleation, growth, and solute redistribution. The numerical results are in good agreement with the experimental results, suggesting that the growth process can be divided four stages, and the thickness of the Fe2Al5 layer increases nonlinearly with the increase of the growth time. The whole nucleation and growth process experienced 1.7~2 s, and the fastest growth rate is 8 µm/s. The addition of Si element will influence diffusion path of Al atom to form different interface morphology. The effects of peak temperature, cooling time, and the thermal gradient on the IMCs thickness are discussed. It shows that the peak temperature has the major influence on the IMCs thickness.

Effects of peri-operative glucose levels on adverse outcomes in infants receiving open-heart surgery for congenital heart disease with cardiopulmonary bypass.

OBJECTIVE: Studies designed to evaluate the association of hyperglycemia and adverse events in pediatric patients receiving open cardiac surgery have yielded inconsistent results. The aim of this retrospective, observational study was to evaluate the effects of peri-operative glucose levels on adverse events in infants receiving open-heart surgery with CPB. METHODS: From Nov 2009 through Dec 2009, 100 infants undergoing open-heart surgery were enrolled. All glucose values during the operation and intensive care unit stay were documented. Metrics of glucose control, including mean, peak and minimum glucose levels were calculated. Hyperglycemia was defined as a mean glucose above 150 mg/dl. Hypoglycemia was defined as minimum glucose below 65 mg/dl. Multivariable regression analyses were used to determine relationships between these metrics of glucose control and a composite morbidity-mortality outcome after controlling for multiple variables known to influence early outcomes after congenital heart surgery. RESULTS: According to our definition, 43 patients (43%) developed hyperglycemia and 9 patients (9%) developed at least one episode of hypoglycemia. A total of 58 patients reached the overall composite morbidity-mortality end point at some point during the study period. After adjusting the effects of age, cross-clamp time and pre-operative percutaneous oxygen saturation by multivariable analysis, euglycemia, defined as mean glucose ≤150 mg/dl, was found to be a significant predictor for morbidity, with an odds ratio of 5.1(95% confidence interval 1.5-17.5). CONCLUSION: In contrast to adult critically ill patients, data from the present study did not prove that hyperglycemia was detrimental to infants receiving open-heart surgery with CPB. The existing literature and findings of our present study warranted future clinical studies of strict glycemic control in critically ill children, considering a more permissive glycemic range as a desirable target.

Genome and population evolution and environmental adaptation of Glyptosternon maculatum on the Qinghai-Tibet Plateau.

Persistent uplift means the Qinghai-Tibet Plateau (QTP) is an ideal natural laboratory to investigate genome evolution and adaptation within highland environments. However, how paleogeographic and paleoclimatic events influence the genome and population of endemic fish species remains unclear. Glyptosternon maculatum is an ancient endemic fish found on the QTP and the only critically endangered species in the Sisoridae family. Here, we found that major transposons in the G. maculatum genome showed episodic bursts, consistent with contemporaneous geological and climatic events during the QTP formation. Notably, histone genes showed significant expansion in the G. maculatum genome, which may be mediated by long interspersed nuclear elements (LINE) repetitive element duplications. Population analysis showed that ancestral G. maculatum populations experienced two significant depressions 2.6 million years ago (Mya) and 10 000 years ago, exhibiting excellent synchronization with Quaternary glaciation and the Younger Dryas, respectively. Thus, we propose that paleogeography and paleoclimate were dominating driving forces for population dynamics in endemic fish on the QTP. Tectonic movements and temperature fluctuation likely destroyed the habitat and disrupted the drainage connectivity among populations. These factors may have caused severe bottlenecks and limited migration among ancestral G. maculatum populations, resulting in the low genetic diversity and endangered status of the species today.

3DPhenoFish: Application for two- and three-dimensional fish morphological phenotype extraction from point cloud analysis.

Fish morphological phenotypes are important resources in artificial breeding, functional gene mapping, and population-based studies in aquaculture and ecology. Traditional morphological measurement of phenotypes is rather expensive in terms of time and labor. More importantly, manual measurement is highly dependent on operational experience, which can lead to subjective phenotyping results. Here, we developed 3DPhenoFish software to extract fish morphological phenotypes from three-dimensional (3D) point cloud data. Algorithms for background elimination, coordinate normalization, image segmentation, key point recognition, and phenotype extraction were developed and integrated into an intuitive user interface. Furthermore, 18 key points and traditional 2D morphological traits, along with 3D phenotypes, including area and volume, can be automatically obtained in a visualized manner. Intuitive fine-tuning of key points and customized definitions of phenotypes are also allowed in the software. Using 3DPhenoFish, we performed high-throughput phenotyping for four endemic Schizothoracinae species, including Schizopygopsis younghusbandi, Oxygymnocypris stewartii, Ptychobarbus dipogon, and Schizothorax oconnori. Results indicated that the morphological phenotypes from 3DPhenoFish exhibited high linear correlation (>0.94) with manual measurements and offered informative traits to discriminate samples of different species and even for different populations of the same species. In summary, we developed an efficient, accurate, and customizable tool, 3DPhenoFish, to extract morphological phenotypes from point cloud data, which should help overcome traditional challenges in manual measurements. 3DPhenoFish can be used for research on morphological phenotypes in fish, including functional gene mapping, artificial selection, and conservation studies. 3DPhenoFish is an open-source software and can be downloaded for free at https://github.com/lyh24k/3DPhenoFish/tree/master.

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior.

For gas metal arc welding (GMAW), increasing the welding current is the most effective way to improve welding efficiency. However, much higher current decreases the welding quality as a result of metal rotating-spray transfer phenomena in the high-current GMAW process. In this work, the external axial magnetic field (EAMF) was applied to the high-current GMAW process to control the metal transfer and decrease the welding spatters. A unified arc-droplet coupled model for high-current GMAW using EAMFs was built to investigate the metal rotating-spray transfer behavior. The temperature fields, flow fields in the arc, and droplet were revealed. Considering all the heat transferred to the molten metal, the Joule heat was found to be the dominant factor affecting the droplet temperature rise, followed by the anode heat. The conductive heat from the arc contributed less than half the value of the other two. Considering the EAMFs of different alternating frequencies, the arc constricting effects and controlled metal transfer behaviors are discussed. The calculated results agree well with the experimental high-speed camera observations.

Feasibility and Reliability of an Ultrasound Examination to Diagnose Piriformis Syndrome.

OBJECTIVE: We explored the diagnostic performance of ultrasound examinations in the diagnosis of piriformis syndrome (PS). METHODS: In our single-center retrospective study, 52 patients with a diagnosis of PS and 50 healthy volunteers were enrolled to undergo ultrasound examination of the piriformis and sciatic nerve. The thicknesses of the piriformis and the diameter of the sciatic nerve were measured to compare the differences between the patients with PS and healthy volunteers. The diagnostic performance of ultrasound examinations was assessed by constructing a receiver operating characteristic curve and calculating the area under the curve. RESULTS: In patients with PS, the piriformis and sciatic nerve were enlarged on the abnormal side compared with the asymptomatic side, accompanied by a decreased echo intensity and an unclear perineurium. In addition, the piriformis thickness and sciatic nerve diameter of those with PS were significantly greater than were those of the healthy volunteers. The diagnostic performance of ultrasonography was significant. The area under the receiver operating characteristic curve for piriformis thickness and sciatic nerve diameter to discriminate between the abnormal and asymptomatic sides was 0.778 and 0.871, respectively. CONCLUSION: Ultrasound examinations can assist in the clinical diagnosis of PS and have the potential to be an alternative method for the diagnosis of PS for most musculoskeletal clinicians.

Ultrasound-guided needle release of the transverse carpal ligament with and without corticosteroid injection for the treatment of carpal tunnel syndrome.

BACKGROUND: To compare the clinical effectiveness of ultrasound-guided needle release of the transverse carpal ligament (TCL) with and without corticosteroid injection in carpal tunnel syndrome (CTS). METHODS: From June 2016 to June 2017, 49 CTS patients (50 wrists) were included in this study. Twenty-five wrists were treated with ultrasound-guided needle release of the TCL plus corticosteroid injection (group A), and 25 wrists were treated with single ultrasound-guided needle release of the TCL (group B). The following parameters were assessed and compared including postprocedure results according to relief of symptoms, ultrasound parameters (cross-sectional area of the median nerve at the levels of pisiform, flattening ratio of median nerve at the levels of the hamate bone, and the thicknesses of TCL on the cross-section at the level of the hamate bone), and electrophysiological parameters (distal motor latency and sensory conduction velocity). RESULTS: Group A had higher overall excellent and good rate 3 months after the procedure than group B (84 vs 52%, P < 0.05). There were significant differences regarding the above ultrasonic and electrophysiological parameters between the baseline and postprocedure values in both groups (all P < 0.05). There were significant differences regarding the postprocedure values of above ultrasonic and electrophysiological parameters between the two groups (all P < 0.05). No complications such as infection or tendon rupture were noted. No procedures were converted to the open release. CONCLUSIONS: Both techniques are effective in treating CTS. Ultrasound-guided needle release of the TCL with corticosteroid injection had better treatment benefits than single ultrasound-guided needle release of the TCL in treating CTS.