RESUMO
Advancements in optical coherence control1-5 have unlocked many cutting-edge applications, including long-haul communication, light detection and ranging (LiDAR) and optical coherence tomography6-8. Prevailing wisdom suggests that using more coherent light sources leads to enhanced system performance and device functionalities9-11. Our study introduces a photonic convolutional processing system that takes advantage of partially coherent light to boost computing parallelism without substantially sacrificing accuracy, potentially enabling larger-size photonic tensor cores. The reduction of the degree of coherence optimizes bandwidth use in the photonic convolutional processing system. This breakthrough challenges the traditional belief that coherence is essential or even advantageous in integrated photonic accelerators, thereby enabling the use of light sources with less rigorous feedback control and thermal-management requirements for high-throughput photonic computing. Here we demonstrate such a system in two photonic platforms for computing applications: a photonic tensor core using phase-change-material photonic memories that delivers parallel convolution operations to classify the gaits of ten patients with Parkinson's disease with 92.2% accuracy (92.7% theoretically) and a silicon photonic tensor core with embedded electro-absorption modulators (EAMs) to facilitate 0.108 tera operations per second (TOPS) convolutional processing for classifying the Modified National Institute of Standards and Technology (MNIST) handwritten digits dataset with 92.4% accuracy (95.0% theoretically).
Assuntos
Redes Neurais de Computação , Óptica e Fotônica , Fótons , Tomografia de Coerência Óptica , Humanos , Óptica e Fotônica/instrumentação , Óptica e Fotônica/métodos , Doença de Parkinson/diagnóstico , Doença de Parkinson/fisiopatologia , Silício/química , Tomografia de Coerência Óptica/instrumentação , Tomografia de Coerência Óptica/métodos , Marcha/fisiologia , Conjuntos de Dados como Assunto , Sensibilidade e EspecificidadeRESUMO
Integrated photonic circuits (PICs) have seen an explosion in interest, through to commercialization in the past decade. Most PICs rely on sharp resonances to modulate, steer, and multiplex signals. However, the spectral characteristics of high-quality resonances are highly sensitive to small variations in fabrication and material constants, which limits their applicability. Active tuning mechanisms are commonly employed to account for such deviations, consuming energy and occupying valuable chip real estate. Readily employable, accurate, and highly scalable mechanisms to tailor the modal properties of photonic integrated circuits are urgently required. Here, we present an elegant and powerful solution to achieve this in a scalable manner during the semiconductor fabrication process using existing lithography tools: by exploiting the volume shrinkage exhibited by certain polymers to permanently modulate the waveguide's effective index. This technique enables broadband and lossless tuning with immediate applicability in wide-ranging applications in optical computing, telecommunications, and free-space optics.
RESUMO
The use of nonlinear elements with memory as photonic computing components has seen a huge surge in interest in recent years with the rise of artificial intelligence and machine learning. A key component is the nonlinear element itself. A class of materials known as phase change materials has been extensively used to demonstrate the viability of such computing. However, such materials continue to have relatively slow switching speeds, and issues with cyclability related to phase segregation of phase change alloys. Here, using antimony (Sb) thin films with thicknesses less than 5 nm we demonstrate reversible, ultrafast switching on an integrated photonic platform with retention time of tens of seconds. We use subpicosecond pulses, the shortest used to switch such elements, to program seven distinct memory levels. This portends their use in ultrafast nanophotonic applications ranging from nanophotonic beam steerers to nanoscale integrated elements for photonic computing.
Assuntos
Antimônio , Inteligência Artificial , Ligas , Óptica e Fotônica , FótonsRESUMO
Sustainability has become a critical concern in the semiconductor industry as hazardous wastes released during the manufacturing process of semiconductor devices have an adverse impact on human beings and the environment. The use of hazardous solvents in existing fabrication processes also restricts the use of polymer substrates because of their low chemical resistance to such solvents. Here, we demonstrate an environmentally friendly mechanical, bilayer lithography that uses just water for development and lift-off. We show that we are able to create arbitrary patterns achieving resolution down to 310 nm. We then demonstrate the use of this technique to create functional devices by fabricating a MoS2 photodetector on a polyethylene terephthalate (PET) substrate with measured response times down to 42 ms.
Assuntos
Impressão , Água , Humanos , Polímeros , SemicondutoresRESUMO
Atomic force microscopy (AFM) provides unique insight into the nanoscale properties of materials. It has been challenging, however, to use AFM to study soft materials such as liquids or gels because of their tendency to flow in response to stress. We propose an AFM-based technique for quantitatively analyzing the transport of soft materials from an AFM probe to a surface. Specifically, we present a method for loading an AFM probe with a single 0.3 to 30 pL droplet of liquid and subsequently measuring the mass of this liquid by observing the change in the vibrational resonance frequency of the cantilever. Using this approach, the mass of this liquid was detected with picogram-scale precision by a commercial AFM system. Additionally, sub-femtoliter droplets of liquid were transferred from the probe to a surface with agreement found between the real-time change in mass of the liquid-loaded probe and the volume of the feature written on the surface. To demonstrate the utility of this approach in studying nanoscale capillary and transport phenomena, we experimentally determine that the quantity of liquid transported from the tip to a surface in a given patterning operation scales as the mass of liquid on the probe to the 1.35 power. In addition to providing new avenues for studying the dynamics of soft materials on the nanoscale, this method can improve nanopatterning of soft materials by providing in situ feedback.
RESUMO
Photonic integrated circuits (PICs) are revolutionizing the realm of information technology, promising unprecedented speeds and efficiency in data processing and optical communication. However, the nanoscale precision required to fabricate these circuits at scale presents significant challenges, due to the need to maintain consistency across wavelength-selective components, which necessitates individualized adjustments after fabrication. Harnessing spectral alignment by automated silicon ion implantation, in this work scalable and non-volatile photonic computational memories are demonstrated in high-quality resonant devices. Precise spectral trimming of large-scale photonic ensembles from a few picometers to several nanometres is achieved with long-term stability and marginal loss penalty. Based on this approach, spectrally aligned photonic memory and computing systems for general matrix multiplication are demonstrated, enabling wavelength multiplexed integrated architectures at large scales.
RESUMO
The field of flat optics that uses nanostructured, so-called metasurfaces, has seen remarkable progress over the last decade. Chalcogenide phase-change materials (PCMs) offer a promising platform for realizing reconfigurable metasurfaces, as their optical properties can be reversibly tuned. Yet, demonstrations of phase-change metalenses to date have employed material compositions such as Ge2 Sb2 Te5 , which show high absorption in the visible to near-IR wavelengths particularly in their crystalline state, limiting the applicability. Here, by using a low-loss PCM Sb2 Se3 , for the first time, active polarization-insensitive phase-change metalenses at near-IR wavelengths with comparable efficiencies in both material states are shown. An active metalens with a tunable focusing intensity of 95% and a focusing efficiency of 23% is demonstrated. A varifocal metalens is then demonstrated with a tunable focal length from 41 to 123 µm with comparable focusing efficiency (5.7% and 3%). The ultralow-loss nature of the material introduces exciting new possibilities for optical communications, multi-depth imaging, beam steering, optical routing, and holography.
RESUMO
Electronically reprogrammable photonic circuits based on phase-change chalcogenides present an avenue to resolve the von-Neumann bottleneck; however, implementation of such hybrid photonic-electronic processing has not achieved computational success. Here, we achieve this milestone by demonstrating an in-memory photonic-electronic dot-product engine, one that decouples electronic programming of phase-change materials (PCMs) and photonic computation. Specifically, we develop non-volatile electronically reprogrammable PCM memory cells with a record-high 4-bit weight encoding, the lowest energy consumption per unit modulation depth (1.7 nJ/dB) for Erase operation (crystallization), and a high switching contrast (158.5%) using non-resonant silicon-on-insulator waveguide microheater devices. This enables us to perform parallel multiplications for image processing with a superior contrast-to-noise ratio (≥87.36) that leads to an enhanced computing accuracy (standard deviation σ ≤ 0.007). An in-memory hybrid computing system is developed in hardware for convolutional processing for recognizing images from the MNIST database with inferencing accuracies of 86% and 87%.
RESUMO
We present an adaptive optical neural network based on a large-scale event-driven architecture. In addition to changing the synaptic weights (synaptic plasticity), the optical neural network's structure can also be reconfigured enabling various functionalities (structural plasticity). Key building blocks are wavelength-addressable artificial neurons with embedded phase-change materials that implement nonlinear activation functions and nonvolatile memory. Using multimode focusing, the activation function features both excitatory and inhibitory responses and shows a reversible switching contrast of 3.2 decibels. We train the neural network to distinguish between English and German text samples via an evolutionary algorithm. We investigate both the synaptic and structural plasticity during the training process. On the basis of this concept, we realize a large-scale network consisting of 736 subnetworks with 16 phase-change material neurons each. Overall, 8398 neurons are functional, highlighting the scalability of the photonic architecture.
RESUMO
Wavelength and polarization are two fundamental properties of light within which information can be encoded and (de)multiplexed. While wavelength-selective systems have widely proliferated, polarization-addressable active photonics has not seen notable progress, primarily because tunable and polarization-selective nanostructures have been elusive. Here, we introduce hybridized-active-dielectric (HAD) nanowires to achieve polarization-selective tunability. We then demonstrate the ability to use polarization as a parameter to selectively modulate the conductance of individual nanowires within a multi-nanowire system. By using polarization as the tunable vector, we show matrix-vector multiplication in a nanowire device configuration. While our HAD nanowires use phase-change materials as the active material, this concept is readily generalized to other active materials hybridized with dielectrics and thus has the potential in a broad range of applications from photonic memories and routing to polarization-multiplexed computing.
RESUMO
The ever-increasing demands for data processing and storage will require seamless monolithic co-integration of electronics and photonics. Phase-change materials are uniquely suited to fulfill this function due to their dual electro-optical sensitivity, nonvolatile retention properties, and fast switching dynamics. The extreme size disparity however between CMOS electronics and dielectric photonics inhibits the realization of efficient and compact electrically driven photonic switches, logic and routing elements. Here, the authors achieve an important milestone in harmonizing the two domains by demonstrating an electrically reconfigurable, ultra-compact and nonvolatile memory that is optically accessible. The platform relies on localized heat, generated within a plasmonic structure; this uniquely allows for both optical and electrical readout signals to be interlocked with the material state of the PCM while still ensuring that the writing operation is electrically decoupled. Importantly, by miniaturization and effective thermal engineering, the authors achieve unprecedented energy efficiency, opening up a path towards low-energy optoelectronic hardware for neuromorphic and in-memory computing.
RESUMO
Nanofabrication has experienced extraordinary progress in the area of lithography-led processes over the last decades, although versatile and adaptable techniques addressing a wide spectrum of materials are still nascent. Scanning probe lithography (SPL) offers the capability to readily pattern sub-100 nm structures on many surfaces; however, the technique does not scale to dense and multi-lengthscale structures. Here, we demonstrate a technique, which we term nanocalligraphy scanning probe lithography (nc-SPL), that overcomes these limitations. Nc-SPL employs an asymmetric tip and exploits its rotational asymmetry to generate structures spanning the micron to nanometer lengthscales through real-time linewidth tuning. Using specialized tip geometries and by precisely controlling the patterning direction, we demonstrate sub-50 nm patterns while simultaneously improving on throughput, tip longevity, and reliability compared to conventional SPL. We further show that nc-SPL can be employed in both positive and negative tone patterning modes, in contrast to conventional SPL. This underlines the potential of this technique for processing sensitive surfaces such as 2D materials, which are prone to tip-induced shear or beam-induced damage.
RESUMO
Modern-day computers rely on electrical signaling for the processing and storage of data, which is bandwidth-limited and power hungry. This fact has long been realized in the communications field, where optical signaling is the norm. However, exploiting optical signaling in computing will require new on-chip devices that work seamlessly in both electrical and optical domains, without the need for repeated electrical-to-optical conversion. Phase-change devices can, in principle, provide such dual electrical-optical operation, but assimilating both functionalities into a single device has so far proved elusive owing to conflicting requirements of size-limited electrical switching and diffraction-limited optical response. Here, we combine plasmonics, photonics, and electronics to deliver an integrated phase-change memory cell that can be electrically or optically switched between binary or multilevel states. Crucially, this device can also be simultaneously read out both optically and electrically, offering a new strategy for merging computing and communications technologies.