Insights into the binding behavior of native and non-native cytochromes to photosystem I from Thermosynechococcus elongatus.

The binding of photosystem I (PS I) from Thermosynechococcus elongatus to the native cytochrome (cyt) c6 and cyt c from horse heart (cyt cHH) was analyzed by oxygen consumption measurements, isothermal titration calorimetry (ITC), and rigid body docking combined with electrostatic computations of binding energies. Although PS I has a higher affinity for cyt cHH than for cyt c6, the influence of ionic strength and pH on binding is different in the two cases. ITC and theoretical computations revealed the existence of unspecific binding sites for cyt cHH besides one specific binding site close to P700 Binding to PS I was found to be the same for reduced and oxidized cyt cHH Based on this information, suitable conditions for cocrystallization of cyt cHH with PS I were found, resulting in crystals with a PS I:cyt cHH ratio of 1:1. A crystal structure at 3.4-Å resolution was obtained, but cyt cHH cannot be identified in the electron density map because of unspecific binding sites and/or high flexibility at the specific binding site. Modeling the binding of cyt c6 to PS I revealed a specific binding site where the distance and orientation of cyt c6 relative to P700 are comparable with cyt c2 from purple bacteria relative to P870 This work provides new insights into the binding modes of different cytochromes to PS I, thus facilitating steps toward solving the PS I-cyt c costructure and a more detailed understanding of natural electron transport processes.

Bioelectronic Circuit on a 3D Electrode Architecture: Enzymatic Catalysis Interconnected with Photosystem I.

Artificial light-driven signal chains are particularly important for the development of systems converting light into a current, into chemicals or for light-induced sensing. Here, we report on the construction of an all-protein, light-triggered, catalytic circuit based on photosystem I, cytochrome c (cyt c) and human sulfite oxidase (hSOX). The defined assembly of all components using a modular design results in an artificial biohybrid electrode architecture, combining the photophysical features of PSI with the biocatalytic properties of hSOX for advanced light-controlled bioelectronics. The working principle is based on a competitive switch between electron supply from the electrode or by enzymatic substrate conversion.

Unidirectional Photocurrent of Photosystem I on π-System-Modified Graphene Electrodes: Nanobionic Approaches for the Construction of Photobiohybrid Systems.

One major vital element of the oxygenic photosynthesis is photosystem I (PSI). We report on the construction of graphene-based nanohybrid light-harvesting architectures consisting of PSI supercomplexes adsorbed onto π-system-modified graphene interfaces. The light-driven nanophotobioelectrochemical architectures have been designed on a modified carbon surface, on the basis of π-π-stacking interactions between polycyclic aromatic compounds and graphene. As a result of the remarkable features of graphene and the feasibility of purposeful surface property adjustment, well-defined photoelectrochemical responses have been displayed by the nanophotohybrid electrodes. In particular, the PSI-graphene electrodes utilizing naphthalene derivatives provided a suitable surface for the adsorption of PSI and display already at the open circuit potential (OCP) a high cathodic photocurrent output of 4.5 ± 0.1 µA/cm(2). By applying an overpotential and addition of a soluble electron acceptor (methyl viologen), the photocurrent density can be further magnified to 20 ± 0.5 µA/cm(2). On the contrary, the investigated anthracene-based PSI-graphene electrodes exhibit considerably smaller and not very directed photoelectrochemical responses. This study grants insights into the influences of different polycyclic aromatic compounds acting as an interface between the very large protein supercomplex PSI and graphene while supporting the electrochemical communication of the biomolecule with the electrode. It needs to be emphasized that solely the naphthalene-based photoelectrodes reveal unidirectional cathodic photocurrents, establishing the feasibility of utilizing this advanced approach for the construction of next-generation photovoltaic devices.

Microscale Crystals of Cytochrome†c and Calixarene on Electrodes: Interprotein Electron Transfer between Defined Sites.

The assembly of redox proteins on electrodes is an important step in biosensor development. Recently, p-sulfonato-calix[4]arene was shown to act as "molecular glue" for the assembly and crystallization of cytochrome c (cyt c). Electrochemical data are presented for microscale cyt c-calixarene crystals grown on self-assembled monolayers (SAM)-modified Au electrodes. The crystals were characterized by cyclic voltammetry and exceptionally high concentrations of electroactive cyt c were obtained. The peak currents were found to increase linearly with the square root of the scan rate, thus allowing an evaluation of the rate constant for electron self-exchange. This study revealed high electroactivity accompanied by fast interprotein electron transfer in crystals, which may have implications for the construction of novel bioelectronic devices.

Advanced unidirectional photocurrent generation via cytochrome c as reaction partner for directed assembly of photosystem I.

Conversion of light into an electrical current based on biohybrid systems mimicking natural photosynthesis is becoming increasingly popular. Photosystem I (PSI) is particularly useful in such photo-bioelectrochemical devices. Herein, we report on a novel biomimetic approach for an effective assembly of photosystem I with the electron transfer carrier cytochrome c (cyt c), deposited on a thiol-modified gold-surface. Atomic force microscopy and surface plasmon resonance measurements have been used for characterization of the assembly process. Photoelectrochemical experiments demonstrate a cyt c mediated generation of an enhanced unidirectional cathodic photocurrent. Here, cyt c can act as a template for the assembly of an oriented and dense layer of PSI and as wiring agent to direct the electrons from the electrode towards the photosynthetic reaction center of PSI. Furthermore, three-dimensional protein architectures have been formed via the layer-by-layer deposition technique resulting in a successive increase in photocurrent densities. An intermittent cyt c layer is essential for an efficient connection of PSI layers with the electrode and for an improvement of photocurrent densities.

Nanobiomolecular multiprotein clusters on electrodes for the formation of a switchable cascadic reaction scheme.

A supramolecular multicomponent protein architecture on electrodes is developed that allows the establishment of bidirectional electron transfer cascades based on interprotein electron exchange. The architecture is formed by embedding two different enzymes (laccase and cellobiose dehydrogenase) and a redox protein (cytochrome c) by means of carboxy-modified silica nanoparticles in a multiple layer format. The construct is designed as a switchable dual analyte detection device allowing the measurement of lactose and oxygen, respectively. As the switching force we apply the electrode potential, which ensures control of the redox state of cytochrome c. The two signal chains are operating in a non-separated matrix and are not disturbed by the other biocatalyst.

Catalytically active silica nanoparticle-based supramolecular architectures of two proteins--cellobiose dehydrogenase and cytochrome C on electrodes.

Artificial nanobiomolecular architectures that follow natural examples in protein assembly become more and more important from basic and applied points of view. Our study describes the investigation on cellobiose dehydrogenase (CDH), cytochrome c (cyt c), and silica nanoparticles (SiNP's) for the construction of fully catalytically active supramolecular architectures on electrodes. We report on intraprotein, interprotein, and direct electron-transfer reaction cascades of cellobiose dehydrogenase and cytochrome c immobilized in multiple supramolecular layers. Carboxy-modified SiNP's are used to provide an artificial matrix, which enables protein arrangement in an electroactive form. Direct and interprotein electron transfer has been established for a two-protein system with CDH and cyt c in a layered architecture for the first time. We also highlight that the glycosylation of CDH and the silica nanoparticle size play key roles in the mode of operation in such a complex system. The response of the specific substrate, here lactose, can be tuned by the number of immobilized nanobiomolecular layers.

Silica nanoparticles for the layer-by-layer assembly of fully electro-active cytochrome c multilayers.

BACKGROUND: For bioanalytical systems sensitivity and biomolecule activity are critical issues. The immobilization of proteins into multilayer systems by the layer-by-layer deposition has become one of the favorite methods with this respect. Moreover, the combination of nanoparticles with biomolecules on electrodes is a matter of particular interest since several examples with high activities and direct electron transfer have been found. Our study describes the investigation on silica nanoparticles and the redox protein cytochrome c for the construction of electro-active multilayer architectures, and the electron transfer within such systems. The novelty of this work is the construction of such artificial architectures with a non-conducting building block. Furthermore a detailed study of the size influence of silica nanoparticles is performed with regard to formation and electrochemical behavior of these systems. RESULTS: We report on interprotein electron transfer (IET) reaction cascades of cytochrome c (cyt c) immobilized by the use of modified silica nanoparticles (SiNPs) to act as an artificial matrix. The layer-by-layer deposition technique has been used for the formation of silica particles/cytochrome c multilayer assemblies on electrodes. The silica particles are characterized by dynamic light scattering (DLS), Fourier transformed infrared spectroscopy (FT-IR), Zeta-potential and transmission electron microscopy (TEM). The modified particles have been studied with respect to act as an artificial network for cytochrome c and to allow efficient interprotein electron transfer reactions. We demonstrate that it is possible to form electro-active assemblies with these non-conducting particles. The electrochemical response is increasing linearly with the number of layers deposited, reaching a cyt c surface concentration of about 80 pmol/cm2 with a 5 layer architecture. The interprotein electron transfer through the layer system and the influence of particle size are discussed. CONCLUSIONS: This study demonstrates the ability to construct fully electro-active cyt c multilayer assemblies by using carboxy-modified silica nanoparticles. Thus it can be shown that functional, artificial systems can be build up following natural examples of protein arrangements. The absence of any conductive properties in the second building block clearly demonstrates that mechanisms for electron transfer through such protein multilayer assemblies is based on interprotein electron exchange, rather than on wiring of the protein to the electrode.The construction strategy of this multilayer system provides a new controllable route to immobilize proteins in multiple layers featuring direct electrochemistry without mediating shuttle molecules and controlling the electro-active amount by the number of deposition steps.

In vitro synthesis of new cyclodepsipeptides of the PF1022-type: probing the alpha-D-hydroxy acid tolerance of PF1022 synthetase.

The nonribosomal peptide synthetase PF1022-synthetase (PFSYN) synthesises the cyclooctadepsipeptide PF1022 from the building blocks D-lactate, D-phenyllactate and N-methylleucine. The substrate tolerance of PFSYN for hydroxy acids was probed by in vitro screening of a set of aliphatic and aromatic alpha-D-hydroxy acids with various structural modifications in the side chain. Thus, new PF1022 derivatives for example, propargyl-D-lactyl-PF1022 and beta-thienyl-D-lactyl-PF1022 were generated. The promiscuous behaviour of PFSYN towards aliphatic and aromatic alpha-D-hydroxy acids is considerably larger than that of related enniatin synthetase (ESYN) and thus gives rise to the enzymatic generation of various new PF1022 derivatives.

Engineering of supramolecular photoactive protein architectures: the defined co-assembly of photosystem I and cytochrome c using a nanoscaled DNA-matrix.

The engineering of renewable and sustainable protein-based light-to-energy converting systems is an emerging field of research. Here, we report on the development of supramolecular light-harvesting electrodes, consisting of the redox protein cytochrome c working as a molecular scaffold as well as a conductive wiring network and photosystem I as a photo-functional matrix element. Both proteins form complexes in solution, which in turn can be adsorbed on thiol-modified gold electrodes through a self-assembly mechanism. To overcome the limited stability of self-grown assemblies, DNA, a natural polyelectrolyte, is used as a further building block for the construction of a photo-active 3D architecture. DNA acts as a structural matrix element holding larger protein amounts and thus remarkably improving the maximum photocurrent and electrode stability. On investigating the photophysical properties, this system demonstrates that effective electron pathways have been created.

Protein multilayer architectures on electrodes for anlayte detection.

This chapter provides an overview of different assembly methodologies used for the construction of multilayer architectures with biomolecules for application in sensors. Besides the use of bioaffinity interactions and covalent strategies, special attention will be paid to the electrostatic layer-by-layer technique. Different building blocks can be used for the formation of multilayers with a clear preference for polymers and nanoparticles. Among the biomolecules, enzymes and redox proteins are in focus. Because of the high importance of multilayers formed on electrodes, the chapter will concentrate on sensor systems with electrochemical transduction. Particularly advantageous are schemes that can avoid diffusible shuttling molecules between the biomolecule and the electrode and that represent artificial signal chains by exploiting direct protein-protein communication in the immobilized state.

In vitro chemoenzymatic and in vivo biocatalytic syntheses of new beauvericin analogues.

New beauvericins have been synthesized using the nonribosomal peptide synthetase BbBEAS from the entomopathogenic fungus Beauveria bassiana. Chemical diversity was generated by in vitro chemoenzymatic and in vivo whole cell biocatalytic syntheses using either a B. bassiana mutant or an E. coli strain expressing the bbBeas gene.