RESUMO
A passive interferometry phase detection method is presented, which emulates the closed-loop high gain approach technique. This method comprises an all-digital closed-loop observer based on the variable structure and sliding modes nonlinear control theory, able to demodulate the phase of an open-loop feedback-free interferometer hardware. A proof-of-concept experiment is conducted by measuring complex displacements (module and angle) generated by a piezoelectric actuator. The results show that this method simplifies the optical hardware while providing features such as direct detection of the optical phase, increase of the dynamic range, high robustness, and dismissing of the feedback phase modulator and reset circuits.
RESUMO
In this work, an optical fiber was coated by a thin-film metal layer to work as a fiber optical phase modulator based on thermal effect. This device was assembled in one of the arms of an all-fiber Michelson interferometer stabilized by a nonlinear control system based on variable structure and sliding modes. The frequency response reached 200 Hz, which can be considered high for a device based on the thermal effect. Compared with a fiber optical phase modulator based on the piezoelectric effect, the thermal modulator presented a higher scale factor per meter of optical fiber, showing the potential to work as a simple, low-cost, small-sized, short length, lightweight, and low-voltage fiber optical phase modulator.
RESUMO
The present work concerns with the modeling, development and application of a novel control strategy based on sliding mode control, for two beam quadrature interferometers, with the high-gain approach. In this case, by reading the control signal the demodulation process does not require phase unwrapping algorithms, i.e., the output signal presents a straight-line relationship with the interferometer total phase shift. This system was implemented in a digital platform to control a bulk Michelson interferometer whose performance was experimentally determined, showing its capability on achieving real-time measurement and presenting wider dynamic range and bandwidth (52.5 rad in low frequencies and 5.8 rad up to 500 Hz) when compared with the literature. Moreover, this performance can be improved even further by simply increasing the feedback gain.