RESUMO
Searching for high energy-density electrode materials for sodium ion batteries has revealed Na-deficient intercalation compounds with lattice oxygen redox as promising high-capacity cathodes. However, anionic redox reactions commonly encountered poor electrochemical reversibility and unfavorable structural transformations during dynamic (de)sodiation processes. To address this issue, we employed lithium orbital hybridization chemistry to create Na-O-Li configuration in a prototype P2-layered Na43/60Li1/20Mg7/60Cu1/6Mn2/3O2 (P2-NaLMCM') cathode material. That Li+ ions, having low electronegativity, reside in the transition metal slabs serves to stimulate unhybridized O 2p orbitals to facilitate the stable capacity contribution of oxygen redox at high state of charge. The prismatic-type structure evolving to an intergrowth structure of the Z phase at high charging state could be simultaneously alleviated by reducing the electrostatic repulsion of O-O layers. As a consequence, P2-NaLMCM' delivers a high specific capacity of 183.8 mAh g-1 at 0.05 C and good cycling stability with a capacity retention of 80.2% over 200 cycles within the voltage range of 2.0-4.5 V. Our findings provide new insights into both tailoring oxygen redox chemistry and stabilizing dynamic structural evolution for high-energy battery cathode materials.
RESUMO
In spite of the competitive performance at room temperature, the development of sodium-ion batteries (SIBs) is still hindered by sluggish electrochemical reaction kinetics and unstable electrode/electrolyte interphase under subzero environments. Herein, a low-concentration electrolyte, consisting of 0.5M NaPF6 dissolving in diethylene glycol dimethyl ether solvent, is proposed for SIBs working at low temperature. Such an electrolyte generates a thin, amorphous, and homogeneous cathode/electrolyte interphase at low temperature. The interphase is monolithic and rich in organic components, reducing the limitation of Na+ migration through inorganic crystals, thereby facilitating the interfacial Na+ dynamics at low temperature. Furthermore, it effectively blocks the unfavorable side reactions between active materials and electrolytes, improving the structural stability. Consequently, Na0.7Li0.03Mg0.03Ni0.27Mn0.6Ti0.07O2//Na and hard carbon//Na cells deliver a high capacity retention of 90.8 % after 900 cycles at 1C, a capacity over 310â mAh g-1 under -30 °C, respectively, showing long-term cycling stability and great rate capability at low temperature.
RESUMO
Layered oxide cathodes usually exhibit high compositional diversity, thus providing controllable electrochemical performance for Na-ion batteries. These abundant components lead to complicated structural chemistry, closely affecting the stacking preference, phase transition and Na+ kinetics. With this perspective, we explore the thermodynamically stable phase diagram of various P2/O3 composites based on a rational biphasic tailoring strategy. Then a specific P2/O3 composite is investigated and compared with its monophasic counterparts. A highly reversible structural evolution of P2/O3-P2/O3/P3-P2/P3-P2/Z/O3'-Z/O3' based on the Ni2+ /Ni3.5+ , Fe3+ /Fe4+ and Mn3.8+ /Mn4+ redox couples upon sequential Na extraction/insertion is revealed. The reduced structural strain at the phase boundary alleviates the phase transition and decreases the lattice mismatch during cycling, endowing the biphasic electrode a large reversible capacity of 144â mAh g-1 with the energy density approaching 514â Wh kg-1 .
RESUMO
O3-type layered oxides with high initial sodium content are promising cathode candidates for Na-ion batteries. However, affected by the undesired transition metal slab sliding and reaction with H2O/CO2, their further application is typically hindered by unsatisfactory cycling stability upon charging to high voltage and poor storage stability under humid air. Herein, we demonstrate a Fe/Ti cosubstitution strategy to simultaneously enhance the electrochemical performance and storage stability of pristine O3-NaNi0.5Mn0.5O2 cathode material, via employing high redox potential and inactive stabilized dopants. The resultant Fe/Ti cosubstituted Na0.95Ni0.40Fe0.15Mn0.3Ti0.15O2 undergoes highly reversible O3-P3-OP2 phase transitions with a small cell volume change of 2.8%, instead of complex O3-O'3-P3-P'3-P3'-O1 phase transitions in NaNi0.5Mn0.5O2. Consequently, the cathode displays a high specific capacity of 161.6 mAh g-1 with an average working voltage of 3.28 V and 81.8% capacity retention after 200 cycles at 5C. Furthermore, the cathode material remains very stable after exposure to air for 7 days and even after soaking in water for 1 h, owing to the prohibition of sodium losing by elevating redox potential and contracting sodium layer spacing. This work proposes an effective method to enhance the electrochemical performance and storage stability of O3-type layered oxide cathodes and promises advancing Na-ion batteries toward large-scale industrialization.
RESUMO
Lithium-ion batteries (LIBs) are at the forefront of energy storage and highly demanded in consumer electronics due to their high energy density, long battery life, and great flexibility. However, LIBs usually suffer from obvious capacity reduction, security problems, and a sharp decline in cycle life under low temperatures, especially below 0 °C, which can be mainly ascribed to the decrease in Li+ diffusion coefficient in both electrodes and electrolyte, poor transfer kinetics on the interphase, high Li+ desolvation barrier in the electrolyte, and severe Li plating and dendrite. Targeting such issues, approaches to improve the kinetics and stability of cathodes are also dissected, followed by the evaluation of the application prospects and modifications between various anodes and the strategies of electrolyte design including cosolvent, blended Li salts, high-concentration electrolyte, and additive introduction. Such designs elucidate the successful exploration of low-temperature LIBs with high energy density and long lifespan. This review prospects the future paths of research for LIBs under cold environments, aiming to provide insightful guidance for the reasonable design of LIBs under low temperature, accelerating their widespread application and commercialization.
RESUMO
O3-NaNi0.25Fe0.5Mn0.25O2 layered oxide is considered one of the most promising cathode candidates for sodium-ion batteries because of its advantages, such as its large capacity and low cost. However, the practical application of this material is limited by its poor cyclic stability and insufficient rate capability. Here, a strategy to substitute the Fe3+ in NaNi0.25Fe0.5Mn0.25O2 with Al3+ is adopted to address these issues. The substitution of Fe3+ with Al3+ enhances the framework stability and phase transition reversibility of the parent NaNi0.25Fe0.5Mn0.25O2 material by forming a stronger TM-O bond, which improves the cycling stability. Moreover, partial Al3+ substitution increases the interslab distance, providing a spacious path for Na+ diffusion and resulting in fast diffusion kinetics, which lead to improved rate capability. Consequently, the target NaNi0.25Fe0.5-xAlxMn0.25O2 sample with optimal x = 0.045 exhibits a remarkable electrochemical performance in a Na-ion cell with a large reversible capacity of 131.7 mA h g-1, a stable retention of approximately 81.6% after cycling at 1C for 100 cycles, and a rate performance of 81.3 mA h g-1 at 10C. This method might pave the way for novel means of improving the electrochemical properties of layered transitional-metal oxides and provide insightful guidance for the design of low-cost cathode materials.