Treatment of real dairy wastewater by electrolysis and photo-assisted electrolysis in presence of chlorides.

The efficiency of electrolysis (EC/Cl2) and photo-assisted electrolysis (EC/UV/Cl2) methods, in the presence of chloride, for the abatement of real dairy waste from a producer in the Triangulo Mineiro region of Brazil, was evaluated. A complete 23 factorial design was performed for the variables time, pH and current. After determining the ideal pH, a Central Compound Design (CCD) was performed, where the applied current (533.42 mA) and treatment time (60.45 minutes) were maximized. The effluent was subsequently submitted to prolonged EC/Cl2 and EC/UV/Cl2 treatment in order to evaluate the behaviour of specific environmental parameters over time. The EC/UV/Cl2 method was more efficient than simple EC/Cl2 treatment. The EC/UV/Cl2 method resulted in a reduction of all environmental parameters investigated to levels within legal standards for effluent discharge. A relatively low cost of treatment is obtained with Energy per Order (EEO) values of 0.89 and 1.22 kWh m-3 order-1 for the EC/UV/Cl2 and EC/Cl2 treatments, respectively. The electrochemical production of free chlorine species followed by subsequent photolysis and production of radical species can convert a simple electrochemical process into an advanced oxidation process (AOP).

Experimental-design-guided approach for the removal of atrazine by sono-electrochemical-UV-chlorine techniques.

The aim of the present study was to investigate the electrochemical formation of free chlorine species (HOCl/ClO-) and their subsequent use for the degradation of the pesticide atrazine. Initially, the process of electrochemical-free chlorine production was investigated using a bench-scale electrochemical flow-cell. The most significant variables (electrolyte concentration ([NaCl]) and inter-electrode gap) of the process were obtained using a 23 factorial design and the optimum process conditions (1.73 mol L-1 and 0.56 cm) were determined by a central composite design. Following optimization of free chlorine production, three degradation techniques were investigated, individually and in combination, for atrazine degradation: electrochemical, photochemical and sonochemical. The method using the techniques in combination was denominated sono-photo-assisted electrochemical degradation. Constant current assays were performed and the sono-photo-assisted electrochemical process promoted more efficient removal of atrazine, achieving total organic carbon removal of ∼98% and removal of atrazine to levels below the detection limit (>99%) in under 30 min of treatment. Furthermore, the combination of three techniques displayed lower energy consumption, and phytotoxicity tests (Lactuca sativa) showed that there was no increase in toxicity.

Venturi: dispositivo de cavitação hidrodinâmica para acelerar a síntese de biodiesel / Venturi: hydrodynamic cavitation device to accelerate biodiesel synthesis

RESUMO O objetivo deste trabalho foi avaliar o potencial do Venturi para a síntese de biodiesel a partir de óleo comestível residual em rota metílica. Para tanto, foi construído em escala de laboratório um aparato experimental constituído de um tanque de 5,2 L e um dispositivo Venturi projetado para produzir o fenômeno de cavitação. A produção de biodiesel foi avaliada em três diferentes pressões de entrada do Venturi: 4,4; 2,9; e 1,4 bar. Os teores de ésteres metílicos foram determinados por cromatografia gasosa. O tempo de síntese de 5,2 L de biodiesel, com o Venturi, foi de 23,2 segundos (ou 4,5 segundos por litro de biodiesel produzido), o que equivale a um único ciclo de passagem pelo sistema a pressão máxima (4,4 bar). Nessa condição, o rendimento dos teores de ésteres foi superior a 98%. Não há na literatura outro caso de síntese tão rápida como a encontrada neste trabalho. A caracterização do biodiesel mostrou que os parâmetros viscosidade cinemática, índice de acidez, ponto de entupimento a frio e massa específica estão dentro dos limites estabelecidos pela Agência Nacional de Petróleo. A comparação com outros estudos da literatura mostrou que o Venturi é superior às placas de orifício na síntese de biodiesel.

Abstract The objective of this work was to evaluate the potential of Venturi in the synthesis of biodiesel from residual edible oil in a methyl route. For this purpose, an experimental apparatus consisting of a 5.2 L tank and a Venturi device designed to produce the cavitation phenomenon was constructed in laboratory scale. Biodiesel production was evaluated at three different Venturi inlet pressures: 4.4; 2.9; and 1.4 bar. Methyl esters contents were determined by gas chromatography. Biodiesel synthesis time with the Venturi device was 23.2 seconds (or 4.5 seconds per liter of biodiesel produced), which is equivalent to a single cycle of the system at maximum pressure (4.4 bar). In this condition, the yield of the ester contents was greater than 98%. There is no other case of synthesis as fast as that found in this work. The biodiesel characterization showed that the parameters kinematic viscosity, acidity index, cold clogging point, and specific mass are within the limits established by National Agency of Petroleum Natural Gas and Biofuels (Agência Nacional de Petróleo). The use of Venturi, as a cavitation device, was shown to be more efficient in biodiesel synthesis than other devices, such as orifice plates.