Evaluation of the condylar position in younger and older adults with or without temporomandibular symptoms by using cone beam computed tomography.

STATEMENT OF PROBLEM: Recent studies in young adults have questioned the influence of discrepancies between central and maximal intercuspal positions in temporomandibular disorders (TMDs). However, whether this finding was because this type of etiologic agent requires time for the development of changes in the condylar position is unclear. PURPOSE: The purpose of this clinical study was to use cone beam computed tomography (CBCT) to evaluate the presence or absence of discrepancies between the centric relation (CR) and maximum intercuspation (MI) in younger and older adults in populations with or without TMDs. MATERIAL AND METHODS: The sample was composed of 80 volunteers, 40 younger individuals aged 18 to 25 years (27 women and 13 men), half with and half without TMD symptoms, and 40 older participants aged 35 to 50 years (30 women and 10 men), half with and half without TMD symptoms. The TMD symptoms were diagnosed by using the diagnostic (standard) criteria for TMD research (RDC/TMD). Two CBCT scans were performed on each participant, one in MI and another in CR. Measurements of the joint space were performed in coronal and sagittal cuts of the temporomandibular joints, and the collected data were statistically analyzed by using the Mann-Whitney U test (α=.05). RESULTS: No significant differences were found when the CR and MI positions and the presence or absence of TMD symptoms were compared in the younger and older groups. However, when the younger and older groups were compared, significant differences were found in all measures used in this study. CONCLUSIONS: The condyle and mandibular fossa do not seem to be influenced by the CR or MI positions or by the presence or absence of TMD symptoms, but age seems to lead to a quantitative increase in the relationship between these structures.

Evaluation of a dentoalveolar model for testing mouthguards: stress and strain analyses.

BACKGROUND/AIM: Custom-fitted mouthguards are devices used to decrease the likelihood of dental trauma. The aim of this study was to develop an experimental bovine dentoalveolar model with periodontal ligament to evaluate mouthguard shock absorption, and impact strain and stress behavior. METHODS: A pendulum impact device was developed to perform the impact tests with two different impact materials (steel ball and baseball). Five bovine jaws were selected with standard age and dimensions. Six-mm mouthguards were made for the impact tests. The jaws were fixed in a pendulum device and impacts were performed from 90, 60, and 45° angles, with and without mouthguard. Strain gauges were attached at the palatal surface of the impacted tooth. The strain and shock absorption of the mouthguards was calculated and data were analyzed with 3-way anova and Tukey's test (α = 0.05). Two-dimensional finite element models were created based on the cross-section of the bovine dentoalveolar model used in the experiment. A nonlinear dynamic impact analysis was performed to evaluate the strain and stress distributions. RESULTS: Without mouthguards, the increase in impact angulation significantly increased strains and stresses. Mouthguards reduced strain and stress values. CONCLUSIONS: Impact velocity, impact object (steel ball or baseball), and mouthguard presence affected the impact stresses and strains in a bovine dentoalveolar model. Experimental strain measurements and finite element models predicted similar behavior; therefore, both methodologies are suitable for evaluating the biomechanical performance of mouthguards.

Cone-beam tomography assessment of the condylar position in asymptomatic and symptomatic young individuals.

STATEMENT OF PROBLEM: Studies of the condyle-mandibular fossa relationship are common, although the role of this relationship in the development of a temporomandibular disorder remains controversial. PURPOSE: The purpose of this study was to quantitatively evaluate the condyle-mandibular fossa relationship in young individuals with intact dentitions and compare it to that between individuals with and without symptoms of temporomandibular disorder. MATERIAL AND METHODS: Volunteers were classified as asymptomatic (n=20) or symptomatic (n=20) according to research diagnostic criteria for temporomandibular disorders. Each participant underwent 2 cone beam-computed tomography scans of the middle and lower third of the face: 1 scan of the maximum intercuspation position and 1 of the centric relationship position. The distance between the condyle and mandibular fossa was measured on frontal and lateral images of the temporomandibular joint. The condylar position was compared across groups (asymptomatic, symptomatic) by using the Mann-Whitney U test (α=.05). Within each group, the condylar position was compared across maximum intercuspation and centric relationship positions by using the Mann-Whitney U test (α=.05). RESULTS: No statistically significant differences were found in condylar positions between centric relationships and maximum intercuspation in either asymptomatic or symptomatic young adults, and no significant differences were found between asymptomatic and symptomatic young adults. CONCLUSIONS: The condyle-mandibular fossa relationships of these young adults were similar in the centric relationships and maximum intercuspation positions when evaluated by computed tomography. The presence or absence of temporomandibular disorder was not correlated with the condyle position in the temporomandibular joint.

Retrieval technique for full-arch implant-supported fixed prosthesis: a clinical report.

In the event of the loss of an implant and to take advantage of the preexisting structures, a rescue procedure that allows continuous use of the original fixed restoration during the restoration of the tripod support at the implant level can be used. When nonphysiological occlusion forces are avoided, the success rate of this rescue procedure is very similar to any other rehabilitation made following a conventional protocol. Furthermore, the fact that the patient has already adapted to the prosthesis position and its vertical dimension results in easier functional adaptation in the postoperative period and, consequently, greater comfort.

Potential of coconut water and soy milk for use as storage media to preserve the viability of periodontal ligament cells: an in vitro study.

AIM: There is no consensus regarding the ability of coconut water and soy milk to maintain long-term cell viability. This study investigated the ability of pH-adjusted coconut water and soy milk to maintain the viability of periodontal ligament cells over a short and a longer period and compared these abilities with those of other solutions. METHODS: Dog premolar teeth were extracted, dried for 30 min, and stored in the following media for 50 min or 24 h: long shelf-life whole milk (SWM), long shelf-life skim milk (SSM), Hank's Balanced Salt Solution (HBSS), soy milk (SM), and pH-adjusted coconut water (CW). The positive and two negative control groups corresponded to 0-min, 30-min (short-term), and 24-h (long-term) dry times, respectively. Cell viability was analyzed by trypan blue exclusion. Data were statistically analyzed using the Kruskal-Wallis test with post-analysis using the Dunn method. RESULTS: In the short-term experiment, the SSM resulted in significantly lower cell viability than SM and CW. At 24 h, SM and CW resulted in higher viability than HBSS and SSM and in comparable performance with the positive control group. Cell viability decreased over time, except in SM and CW. CONCLUSIONS: Soy milk and pH-adjusted coconut water showed promising results as storage solutions for avulsed teeth, preserving the viability for up to 24 h.

Prevalence of non-carious cervical lesions and orthodontic treatment: a retrospective study.

BACKGROUND: This study aimed to assess the distribution of non-carious cervical lesions (NCCLs) by tooth type, investigate the prevalence of NCCLs in patients undergoing orthodontic treatment, and identify the possible associated factors. MATERIAL AND METHODS: A total of 160 patients were enrolled in this retrospective study. Data on the following variables were collected from pre-and post-orthodontic treatment records: age, sex, Angle's malocclusion, facial pattern, number of activation sessions, compensatory treatment, and retreatment. Frontal, right and left lateral intraoral photographs of each patient were evaluated to identify the presence or absence of NCCLs in each tooth and assess the distribution of NCCLs in the 3840 teeth from the enrolled patients. Furthermore, patients were classified as NCCLs present, irrespective of the number of NCCLs on the teeth or NCCL absent. Bivariate and multivariate Poisson regression analyses with robust variance were used to assess the association between the NCCLs and each independent variable. Prevalence ratio and 95% confidence intervals were calculated and p < 0.05 was considered statistically significant. RESULTS: The prevalence of NCCLs before and after orthodontic treatment was 22.71% and 30.91%, respectively. Premolars were the most affected teeth, followed by the first molars, canines, and incisors. After statistical analysis, age was found to be the variable factor that influenced the prevalence ratio, with NCCL being the most prevalent when orthodontic treatment was performed in adulthood. CONCLUSIONS: Premolars were most commonly affected by NCCLs. Furthermore, age seemed to contribute to the increased prevalence of NCCLs in adults undergoing orthodontic treatment.

The effect of post, core, crown type, and ferrule presence on the biomechanical behavior of endodontically treated bovine anterior teeth.

STATEMENT OF PROBLEM: Unresolved controversy exists concerning the remaining coronal tooth structure of anterior endodontically treated teeth and the best treatment option for restoring them. PURPOSE: The purpose of this study was to evaluate the effect of post, core, crown type, and ferrule presence on the deformation, fracture resistance, and fracture mode of endodontically treated bovine incisors. MATERIAL AND METHODS: One hundred and eighty bovine incisors were selected and divided into 12 treatment groups (n=15). The treatment variations were: with or without ferrule, restored with cast post and core, glass fiber post with composite resin core, or glass fiber post with fiber-reinforced core, and metal- or alumina-reinforced ceramic crown (n=15). The restored incisors were loaded at a 135-degree angle, and the deformation was measured using strain gauges placed on the buccal and proximal root surfaces. Specimens were subsequently loaded to the point of fracture. Strain and fracture resistance results were analyzed by 3-way ANOVA and Tukey HSD tests (α=.05). RESULTS: Ferrule presence did not significantly influence the buccal strain and fracture resistance for the ceramic crown groups, irrespective of core and crown type. Ferrule presence resulted in lower strains and higher fracture resistance in the metal crown groups, irrespective of core. The cast post and core showed lower strain values than groups with glass fiber posts when restored with metal crowns. CONCLUSIONS: Core type did not affect the deformation and fracture resistance of endodontically treated incisors restored with alumina-reinforced ceramic crowns. The presence of a ferrule improved the mechanical behavior of teeth restored with metal crowns, irrespective of core type.

Changes in mandibular and articular dynamics associated with surgical versus nonsurgical treatment of mandibular condylar fractures: a systematic review with meta-analysis.

OBJECTIVE: The aim of this study was to evaluate the mandibular and articular dynamics and the presence of complications associated with surgical or nonsurgical treatments of condylar fractures. STUDY DESIGN: Clinical trials that compared open reduction internal fixation and maxillomandibular fixation in patients with condylar fractures were included. We performed an electronic search of PubMed, Scopus, Cochrane Library, Web of Science, and LILACS (Latin American and Caribbean Health Sciences) databases starting from February 2017 and updated in January 2019 and found 467 articles. We evaluated methodologic quality by using the criteria from Cochrane's Collaboration Tool. RESULTS: After independent screening of abstracts, we assessed the full texts of 88 articles; 9 studies were included for qualitative synthesis; but only 8 were included for the meta-analysis. Four studies were considered to have high risk of bias, and 5 were considered to have low risk. The risk ratio (RR = 0.20; 95% confidence interval [CI] 0.13-0.32) was observed for complications. The quality of evidence, using GRADE software, was considered low for maximum mouth opening and protrusive movement and moderate for lateral excursion movement and complications. CONCLUSIONS: This review suggested that open reduction internal fixation and maxillomandibular fixation are effective. However, surgical treatment presented higher objective parameters. Nonsurgical treatment presented a high index of complications, such as malocclusion, pain and deviation.

Management of fractured dental implants: a case report.

An implant fracture may be one of the major causes of late implant failures. Complications, such as loosening or fracture of the prosthesis restorative components, or even fracture of the implant, may occur and dental professionals should be aware of the causes of these complications. This study reports a clinical situation involving a patient restored with a mandibular overdenture that presented a fractured implant 2 years after placement. The probable cause of the implant fracture was due to biomechanical overload caused by parafunctional habits. The implant head was flattened to make it smooth, retapping the internal screw, installing a new abutment (longer), and fabricating part of the overdenture bar. This treatment was timesaving for the patient in that the prosthesis was repaired in the shortest time possible.

Influence of different tightening forces before laser welding to the implant/framework fit.

PURPOSE: The aim of the present study was to evaluate the influence of abutment screw tightening force before laser welding procedures on the vertical fit of metal frameworks over four implants. MATERIALS AND METHODS: To construct the frameworks, prefabricated titanium abutments and cylindrical titanium bars were joined by laser welding to compose three groups: group of manual torque (GMT), GT10 and GT20. Before welding, manual torque simulating routine laboratory procedure was applied to GTM. In GT10 and GT20, the abutment screws received 10 and 20 Ncm torque, respectively. After welding, the implant/framework interfaces were assessed by optical comparator microscope using two methods. First, the single screw test (SST) was used, in which the interfaces of the screwed and non-screwed abutments were assessed, considering only the abutments at the framework extremities. Second, the interfaces of all the abutments were evaluated when they were screwed. RESULTS: In the SST, intergroup analysis (Kruskal Wallis) showed no significant difference among the three conditions of tightening force; that is, the different tightening force before welding did not guarantee smaller distortions. Intragroup analysis (Wilcoxon) showed that for all groups, the interfaces of the non-screwed abutments were statistically greater than the interfaces of the screwed abutments, evidencing distortions in all the frameworks. ANOVA was applied for the comparison of interfaces when all the abutments were screwed and showed no significant difference among the groups. CONCLUSIONS: Under the conditions of this study, pre-welding tightness on abutment screws did not influence the vertical fit of implant-supported metal frameworks.

Use of distraction osteogenesis for repositioning of an osseointegrated implant: a case report.

This report presents a clinical case in which distraction osteogenesis was used for the vertical repositioning of an implant already osseointegrated in the maxillary right central incisor area. An adhesive prosthesis was cemented over the neighboring teeth to accomplish this procedure. The prosthesis was made with a temporary cylinder directly over the implant to guide its repositioning. After incision and osteotomy, the area that contained the implant was fixed with an implant mount screw. After initial gingival healing (7 days), activation of the distraction was begun. The screw was activated with a full turn thrice a day, for a total of 1.0 mm per day for 7 consecutive days. Thereafter, the bone was allowed to heal for 3 months. Distraction osteogenesis led to a better implant-crown relationship, even after the osseointegration of the implant, thus improving the esthetic results.

Effect of Occlusal Splints on the Stress Distribution on the Temporomandibular Joint Disc.

Conservative approach, including occlusal splint therapy, is the first option to treat temporomandibular disorders (TMD), because of its reversibility. The present study analyzed the effect of the articular disc position and occlusal splints use on the stress distribution on this disc. A two-dimensional (2D) finite element (FE) model of the temporomandibular joint with the articular disc at its physiologic position was constructed based on cone-beam computed tomography. Three other FE models were created changing the disc position, according to occlusal splint use and anterior disc displacement condition. Structural stress distribution analysis was performed using Marc-Mentat package. The equivalent von Mises stress was used to compare the study factor. Higher stress concentration was observed on the intermediate to anterior zone of the disc, with maximum values over 2MPa. No relevant difference was verified on the stress distribution and magnitude comparing disc positions and occlusal splint use. However, there was stress reduction arising from the use of the occlusal splints in cases of anterior disc displacement. In conclusion, based on the generated FE models and established boundary conditions, the stress increased at the intermediate zone of the TMJ disc during physiological mandible closure. The stress magnitude was similar in all tested situations.

Bond strength of three dental porcelains to Ni-Cr and Co-Cr-Ti alloys.

Ceramometal bond strength has played an important role for the replacement of gold alloys by nickel-chromium alloys in dentistry. This study evaluated the metal/porcelain bond strength of three ceramic systems (Vita VMK 88, Williams and Duceram) associated with three nickel-chromium alloys (Durabond, Lite Cast B and Resistal P) and one experimental cobalt-chromium-titanium alloy. Thirty cast cylinder specimens (15 mm in height; 6 mm in diameter) were obtained for each alloy, in away that 10 specimens of each alloy were tested with each porcelain. Bond strength was measured with an Emic screw-driven mechanical testing machine by applying parallel shear forces to the specimens until fracture. Kruskal-Wallis and Mann-Whitney U tests were used for statistical analysis of the alloy/ceramic combinations (p<0.05). Resistal P/Duceram had significantly higher bond strength (44.38+/-9.12 MPa) (p<0.05) than the other combinations, except for Co-Cr-Ti alloy/Vita VMK 88 (38.41+/-12.64 MPa). The association of the experimental Co-Cr-Ti alloy with Williams porcelain had significantly higher bond strength (28.20+/-3.86 MPa) than the combination of other alloys with the same porcelain (p<0.05). Based of these results and within the limitations of an in vitro study, it may be concluded that the bond strength of the three ceramic systems to the Ni-Cr and Co-Cr-Ti alloys varied significantly, indicating that metal/ceramic compatibility was very important to the bond strength.

Influence of Connection Types and Implant Number on the Biomechanical Behavior of Mandibular Full-Arch Rehabilitation.

PURPOSE: To evaluate the influence of different implant numbers and connection types on the biomechanical behavior of mandibular full-arch implant-supported rehabilitation. MATERIALS AND METHODS: Computed tomography-based finite element models comprising a totally edentulous mandible and 3.8 × 13-mmdiameter implants, abutments, abutment screws, bar retaining screw, and bar were constructed. Different implant numbers (three, four, and five implants) and loading conditions (symmetrical/balanced, unilateral, and posterior with diverse loading magnitudes) were simulated for both external hex and Morse-taper connections. The peak equivalent strain (EQV strain) in the bone and the peak of von Mises stress (EQV stress) in the abutment screw and bar retaining screw were evaluated. RESULTS: Lower strain values were observed for a symmetrical loading distribution. Considering the same loading conditions, significantly higher bone strain levels were observed for external hex, compared with the Morse-taper connection. The number of implants had no significant influence on strain levels in bone, irrespective of the connection types. Compared with the external hex connection, the Morse-taper connection type presented significantly lower EQV stress values in abutment screws, but significantly higher stress in the bar retaining screw. Increasing the number of implants significantly reduced the EQV stress in the abutment screw and bar retaining screw. CONCLUSION: The Morse-taper connection type significantly decreased the strain levels in peri-implant bone, while increasing the stress in bar retaining screws. A smaller number of implants in an inferior full-arch rehabilitation slightly increased the stress in the abutment and bar retaining screws. Balanced adjustments of the loading improve the biomechanics of a mandibular full-arch rehabilitation.

Periodontal and Restorative Treatment of Gingival Recession Associated with Non-Carious Cervical Lesions: Case Study.

The association between the presence of gingival recession and non-carious cervical lesions is a common finding in dentistry. These diseases have multifactorial etiology and the treatment should be multidisciplinary. Although traditionally the majority of professionals treat non-carious cervical lesions only with conventional restorative procedures, in most cases a combination of periodontal and restorative treatments provides the best functional and esthetic results. Thus, the objective of this case report was to present a new option for treatment, which consists of a subepithelial connective tissue graft associated with a coronally advanced flap placed on dentin and non-carious cervical lesions restored with lithium disilicate partial veneers. A patient complaining about the esthetic aspects of her teeth and cervical dentin hypersensitivity was submitted to occlusal adjustments and daily diet analysis in order to manage etiologic factors. Experienced operators then performed restorative and surgical treatments. Periodontal clinical attachment level (probing depth + gingival margin), bleeding on probing, plaque index, and the integrity of the restorations were observed. During the monitoring period, the treatment was effective, with good functional and esthetic results. The hypersensitivity disappeared, and neither inflammatory characteristics in gingival tissue nor failures in restorations were noted. It might be concluded that treatment with a combination of techniques can be effective and predictable for patients with gingival recession and non-carious cervical lesions that may or may not require restorative procedures under controlled conditions.

Temporomandibular disorder and anxiety, quality of sleep, and quality of life in nursing professionals.

To evaluate the association between temporomandibular disorder (TMD) and anxiety, quality of sleep, and quality of life in nursing professionals at the Hospital de Clínicas de Uberlândia of the Universidade Federal de Uberlandia--HCU-UFU (Medical University Hospital of the Federal University of Uberlândia), four questionnaires were given to nursing professionals. The questionnaires were completed by 160 of these professionals. The Fonseca's questionnaire was used to evaluate the presence and severity of TMD, the IDATE was used to evaluate anxiety, the SAQ was used to evaluate quality of sleep, and the SF-36 was used to evaluate quality of life. Forty-one nurses (25.6%) reported having no TMD (Fonseca's questionnaire score ≤ 15), 66 (41.3%) had mild TMD (Fonseca's questionnaire score 20-40), 39 (24.4%) had moderate TMD (Fonseca's questionnaire score 45-65), and 14 (8.8%) had severe TMD (Fonseca's questionnaire score ≥ 70). According to Fonseca's questionnaire, the presence of TMD was associated with trait anxiety, but the TMD severity was associated with state anxiety classification (mild, moderate, severe). The SAQ score differed significantly from Fonseca classification. The Fonseca's questionnaire score correlated negatively with the score of each dimension of the SF-36 (r = -0.419 to -0.183). We conclude that TMD is common among nursing professionals; its presence was associated with trait anxiety, and its severity was associated with state anxiety. Hence, the presence of TMD may reduce quality of sleep and quality of life.

Marginal adaptation of indirect composites and ceramic inlay systems.

This study evaluated the marginal adaptation of four different inlay indirect restorative systems: feldspathic ceramic (Duceram LFC-Degussa) and three laboratory-processed resin composites (Solidex-Shofu; Targis-Ivoclar; Artglass-Heraeus Kulzer). Sixty mesial-occlusal-distal (MOD) standard cavities were prepared in mandibular molars and divided randomly. Polyvinylsiloxane impressions were made and the restorations were prepared following the manufacturer's instructions. Marginal adaptation evaluation was accomplished using an image collector computer system with a digital gauging appliance at four points on the occlusal, proximal and gingival regions with 250x magnification. Among all the materials, the marginal discrepancy recorded on the gingival margins was statistically larger than that recorded on the proximal and occlusal regions. Duceram LFC showed greater marginal discrepancy than Solidex, Artglass and Targis, which showed no statistically significant differences among them.

Evaluation of intracanal post removal using ultrasound.

The aim of this study was to determine the effect of ultrasonic vibration on the force necessary to remove pre-fabricated and anatomic and cast posts. Two hundred and forty teeth were divided into two groups. In group I, a 0.8-mm metallic pre-fabricated post, Unimetric-Maillefer, was utilized; in group II, cast copper-aluminum alloy posts measuring 0.8, 1.0 and 1.2 mm in diameter were used. The root canals were prepared in three different diameters: 0.8, 1.0 and 1.2 mm, with a length of 10 mm. The posts were cemented with glass ionomer cement resulting in 20 specimens for each subgroup. Half of the sample was submitted to ultrasonic vibration for 3 min, while the other half did not receive any vibration. The specimens were submitted to traction in a universal testing machine. The results were analyzed by non-parametric Mann-Whitney U, Wilcoxon and Kruskal-Wallis tests. The application of ultrasonic vibration significantly reduced the retention provided by the glass ionomer cement in the fixation of intracanal posts. The ultrasonic action was effective in both pre-fabricated and anatomic and cast posts. The effectiveness of the ultrasonic vibration was not related to the cementation line or the diameter of the post.

Identification of occlusal prematurity by clinical examination and cone-beam computed tomography.

The aim of this study was to evaluate the ability to identify occlusal prematurity by images from paraxial slices of cone-beam computed tomography (CBCT). For such purpose, a pilot study was performed in which 16 asymptomatic young patients were subjected to a clinical examination, including a careful occlusal analysis and then individual deprogrammer devices ("Lucia's JIG") were fabricated. Premature contacts were clinically identified in centric relation (CR) for each patient by jaw manipulation and interocclusal marking with articulating paper (Accufilm). Subsequently, these devices were adjusted in CR and used during the tomographic exams in such a way that CBCT in CR could be obtained. After routine processing, the images were analyzed in order to identify occlusal prematurity on the displayed images by 30 professionals divided according to areas of activity (occlusion specialist, general practitioner and radiologist; n=10 per area) and time of professional experience (less than 5, between 5 and 10, and over 10 years). By comparing the premature contacts identified in the clinical analysis and CBCT images, an agreement index between these two variables was calculated. Data were analyzed statistically by ANOVA and Scott-Knott test (α=0.05). The results showed that the identification of occlusal prematurity by paraxial CBCT slices was proven to be a method of average reliability.