Development of a Mucoadhesive and In Situ Gelling Formulation Based on κ-Carrageenan for Application on Oral Mucosa and Esophagus Walls. I. A Functional In Vitro Characterization.

Oral mucositis and esophagitis represent the most frequent and clinically significant complications of cytoreductive chemotherapy and radiotherapy, which severely compromise the patient quality of life. The local application of polymeric gels could protect the injured tissues, alleviating the most painful symptoms. The present work aims at developing in situ gelling formulations for the treatment of oral mucositis and esophagitis. To reach these targets, κ-carrageenan (κ-CG) was selected as a polymer having wound healing properties and able to gelify in the presence of saliva ions, while hydroxypropyl cellulose (HPC) was used to improve the mucoadhesive properties of the formulations. CaCl2 was identified as a salt able to enhance the interaction between κ-CG and saliva ions. Different salt and polymer concentrations were investigated in order to obtain a formulation having the following features: (i) low viscosity at room temperature to facilitate administration, (ii) marked elastic properties at 37 °C, functional to a protective action towards damaged tissues, and (iii) mucoadhesive properties. Prototypes characterized by different κ-CG, HPC, and CaCl2 concentrations were subjected to a thorough rheological characterization and to in vitro mucoadhesion and washability tests. The overall results pointed out the ability of the developed formulations to produce a gel able to interact with saliva ions and to adhere to the biological substrates.

Dual-Functioning Scaffolds for the Treatment of Spinal Cord Injury: Alginate Nanofibers Loaded with the Sigma 1 Receptor (S1R) Agonist RC-33 in Chitosan Films.

The present work proposed a novel therapeutic platform with both neuroprotective and neuroregenerative potential to be used in the treatment of spinal cord injury (SCI). A dual-functioning scaffold for the delivery of the neuroprotective S1R agonist, RC-33, to be locally implanted at the site of SCI, was developed. RC-33-loaded fibers, containing alginate (ALG) and a mixture of two different grades of poly(ethylene oxide) (PEO), were prepared by electrospinning. After ionotropic cross-linking, fibers were incorporated in chitosan (CS) films to obtain a drug delivery system more flexible, easier to handle, and characterized by a controlled degradation rate. Dialysis equilibrium studies demonstrated that ALG was able to form an interaction product with the cationic RC-33 and to control RC-33 release in the physiological medium. Fibers loaded with RC-33 at the concentration corresponding to 10% of ALG maximum binding capacity were incorporated in films based on CS at two different molecular weights-low (CSL) and medium (CSM)-solubilized in acetic (AA) or glutamic (GA) acid. CSL- based scaffolds were subjected to a degradation test in order to investigate if the different CSL salification could affect the film behavior when in contact with media that mimic SCI environment. CSL AA exhibited a slower biodegradation and a good compatibility towards human neuroblastoma cell line.

Chitosan Oleate Coated Poly Lactic-Glycolic Acid (PLGA) Nanoparticles versus Chitosan Oleate Self-Assembled Polymeric Micelles, Loaded with Resveratrol.

Chitosan oleate (CS-OA), a chitosan salt with amphiphilic properties, has demonstrated the ability to self-assemble in aqueous environment to give polymeric micelles useful to load poorly soluble drugs. More recently, CS-OA was proposed to stabilize nanoemulsions during the preparation by emulsification and solvent evaporation of poly lactic-glycolic acid (PLGA) nanoparticles (NPs) loaded with curcumin. Positive mucoadhesive behavior and internalization properties were demonstrated for these NPs attributable to the presence of positive charge at the NP surface. In the present paper, two CS-OA-based nanosystems, micelles and PLGA NPs, were compared with the aim of elucidating their physico-chemical characteristics, and especially their interaction with cell substrates. The two systems were loaded with resveratrol (RSV), a hydrophobic polyphenol endowed with anti-cancerogenic, anti-inflammatory, and heart/brain protective effects, but with low bioavailability mainly due to poor aqueous solubility. Calorimetric analysis and X-ray spectra demonstrated amorphization of RSV, confirming its affinity for hydrophobic domains of polymeric micelles and PLGA core of NPs. TGA decomposition patterns suggest higher stability of PLGA-NPs compared with polymeric micelles, that anyway resulted more stable than expected, considering the RSV release profiles, and the cell line interaction results.

Development of a Mucoadhesive and an in Situ Gelling Formulation Based on κ-Carrageenan for Application on Oral Mucosa and Esophagus Walls. II. Loading of a Bioactive Hydroalcoholic Extract.

The aim of the present work was to load a Hibiscus sabdariffa (HS) hydroalcoholic extract into in situ gelling formulations for the treatment of oral mucositis and esophagitis. Such formulations, selected as the most promising options in a previous work of ours, were composed by κ-carrageenan (κ-CG), a sulfated marine polymer able to gelify in presence of saliva ions, hydroxypropyl cellulose (HPC), used as mucoadhesive agent, and CaCl2, salt able to enhance the interaction κ-CG/saliva ions. HS extract, which is rich in phytochemicals such as polyphenols, polysaccharides and organic acids, was selected due to its antioxidant and anti-inflammatory properties. For HS extraction, three different methodologies (maceration, Ultrasound Assisted Extraction (UAE) and Microwave Assisted Extraction (MAE)) were compared in terms of extraction yield and extract antioxidant activity, revealing that MAE was the best procedure. Rheological and mucoadhesive properties of HS-loaded formulations were investigated. Such formulations were characterized by a low viscosity at 25 °C, guaranteeing an easy administration, a proper in situ gelation behavior and marked elastic and mucoadhesive properties at 37 °C, functional to a protective action towards the damaged mucosa. Finally, the biocompatibility and the proliferative effect of HS-loaded formulations, as well as their antioxidant and anti-inflammatory properties, were proved in vitro on human dermal fibroblasts.

Nanoparticle formulations to enhance tumor targeting of poorly soluble polyphenols with potential anticancer properties.

Polyphenols have been extensively studied for their relevant anticancer activity. Quite often however their instability, extensive metabolization, low bioavailability and poor solubility limit their application in cancer prevention and therapy. Formulation in nanoparticles has been widely proposed as a means to overcome these limits, maximize localization and specific activity at tumor site. The present review is intended as an update of literature regarding nanoparticulate carriers aimed to deliver polyphenols to the cancer site. Three molecules were chosen, all of which were hydrophobic and poorly soluble, representative of different polyphenol classes: quercetin (QT) among the flavonoid group, curcumin (CUR) as representative of curcuminoids, and resveratrol (RSV) among the stilbenes. In particular, nanoparticulate systems suitable for poorly soluble drugs will be described and attention will be paid to characteristics designed to improve tumor targeting, specific delivery and interaction with tumor cells.

Chitosan Oleate Salt as an Amphiphilic Polymer for the Surface Modification of Poly-Lactic-Glycolic Acid (PLGA) Nanoparticles. Preliminary Studies of Mucoadhesion and Cell Interaction Properties.

Most of the methods of poly-lactic-glycolic acid (PLGA) preparation involve the passage through the emulsification of a PLGA organic solution in water followed by solvent evaporation or extraction. The choice of the droplet stabilizer during the emulsion step is critical for the dimensions and the surface characteristics of the nanoparticles (NPs). In the present work, a recently described ionic amphiphilic chitosan derivative, chitosan oleate salt (CS-OA), was proposed for the first time to prepare PLGA NPs. A full factorial design was used to understand the effect of some formulation and preparation parameters on the NP dimensions and on encapsulation efficiency (EE%) of Nile red, used as a tracer. On the basis of the DoE study, curcumin loaded NPs were prepared, having 329 ± 42 nm dimensions and 68.75% EE%. The presence of a chitosan coating at the surface was confirmed by positive zeta potential and resulted in mucoadhesion behavior. The expected improvement of the interaction of the chitosan surface modified nanoparticles with cell membrane surface was confirmed in Caco-2 cell culture by the internalization of the loaded curcumin.

Association of Alpha Tocopherol and Ag Sulfadiazine Chitosan Oleate Nanocarriers in Bioactive Dressings Supporting Platelet Lysate Application to Skin Wounds.

Chitosan oleate was previously proposed to encapsulate in nanocarriers some poorly soluble molecules aimed to wound therapy, such as the anti-infective silver sulfadiazine, and the antioxidant α tocopherol. Because nanocarriers need a suitable formulation to be administered to wounds, in the present paper, these previously developed nanocarriers were loaded into freeze dried dressings based on chitosan glutamate. These were proposed as bioactive dressings aimed to support the application to wounds of platelet lysate, a hemoderivative rich in growth factors. The dressings were characterized for hydration capacity, morphological aspect, and rheological and mechanical behavior. Although chitosan oleate nanocarriers clearly decreased the mechanical properties of dressings, these remained compatible with handling and application to wounds. Preliminary studies in vitro on fibroblast cell cultures demonstrated good compatibility of platelet lysate with nanocarriers and bioactive dressings. An in vivo study on a murine wound model showed an accelerating wound healing effect for the bioactive dressing and its suitability as support of the platelet lysate application to wounds.

Chitosan Ascorbate Nanoparticles for the Vaginal Delivery of Antibiotic Drugs in Atrophic Vaginitis.

The aim of the present work was the development of chitosan ascorbate nanoparticles (CSA NPs) loaded into a fast-dissolving matrix for the delivery of antibiotic drugs in the treatment of atrophic vaginitis. CSA NPs loaded with amoxicillin trihydrate (AX) were obtained by ionotropic gelation in the presence of pentasodium tripolyphosphate (TPP). Different CSA:TPP and CSA:AX weight ratios were considered and their influence on the particle size, polydispersion index and production yield were investigated. CSA NPs were characterized for mucoadhesive, wound healing and antimicrobial properties. Subsequently, CSA NPs were loaded in polymeric matrices, whose composition was optimized using a DoE (Design of Experiments) approach (simplex centroid design). Matrices were obtained by freeze-drying aqueous solutions of three hydrophilic excipients, polyvinylpirrolidone, mannitol and glycin. They should possess a mechanical resistance suitable for the administration into the vaginal cavity and should readily dissolve in the vaginal fluid. In addition to antioxidant properties, due to the presence of ascorbic acid, CSA NPs showed in vitro mucoadhesive, wound healing and antimicrobial properties. In particular, nanoparticles were characterized by an improved antimicrobial activity with respect to a chitosan solution, prepared at the same concentration. The optimized matrix was characterized by mechanical resistance and by the fast release in simulated vaginal fluid of nanoparticles characterized by unchanged size.

Comparison of poloxamer- and chitosan-based thermally sensitive gels for the treatment of vaginal mucositis.

CONTEXT: The local treatment of vaginal mucositis requires an intimate and prolonged contact of anti-infective drugs with the mucosa. This can be achieved by means of mucoadhesive and thermally sensitive vehicles, capable of gelifying at the physiological temperature. OBJECTIVE: The aim of the present work was to compare the potentiality of poloxamer 407 (PLX)/chitosan lactate (CS-L) and CS-L/glycerophosphate (GP) mixtures as mucoadhesive thermally sensitive vehicles for the treatment of vaginal mucositis. MATERIALS AND METHODS: PLX/CS-L and CS-L/GP mixtures were characterized for gelation and mucoadhesion properties as well as for bioactive (antimicrobial and wound healing) properties. Finally, the mixtures were loaded with amoxicillin trihydrate as model drug and characterized for drug release and washability properties. RESULTS AND DISCUSSION: The addition of CS-L to PLX causes an increase in PLX gelation temperature from 30 °C to the physiological temperature. The dilution with simulated vaginal fluid causes an increase in gelation time of PLX/CS-L mixture, while no variation of such parameter is observed for CS-L/GP mixture which is nevertheless characterized by poorer elastic properties. The stronger mucoadhesion properties of CS-L/GP mixture counterbalance the poorer elasticity of the gel and are responsible for a longer drug contact with the biological substrate. CS-L/GP mixture is moreover characterized by better bioactive properties than PLX-based mixture. CONCLUSION: CS-L/GP mixture represents a promising thermally sensitive vehicle.

Current Status of Polysaccharides-Based Drug Delivery Systems for Nervous Tissue Injuries Repair.

Neurological disorders affecting both CNS and PNS still represent one of the most critical and challenging pathologies, therefore many researchers have been focusing on this field in recent decades. Spinal cord injury (SCI) and peripheral nerve injury (PNI) are severely disabling diseases leading to dramatic and, in most cases, irreversible sensory, motor, and autonomic impairments. The challenging pathophysiologic consequences involved in SCI and PNI are demanding the development of more effective therapeutic strategies since, as yet, a therapeutic strategy that can effectively lead to a complete recovery from such pathologies is not available. Drug delivery systems (DDSs) based on polysaccharides have been receiving more and more attention for a wide range of applications, due to their outstanding physical-chemical properties. This review aims at providing an overview of the most studied polysaccharides used for the development of DDSs intended for the repair and regeneration of a damaged nervous system, with particular attention to spinal cord and peripheral nerve injury treatments. In particular, DDSs based on chitosan and their association with alginate, dextran, agarose, cellulose, and gellan were thoroughly revised.

Robotics and Aseptic Processing in View of Regulatory Requirements.

Several nanomedicine based medicinal products recently reached the market thanks to the drive of the COVID-19 pandemic. These products are characterized by criticality in scalability and reproducibility of the batches, and the manufacturing processes are now being pushed towards continuous production to face these challenges. Although the pharmaceutical industry, because of its deep regulation, is characterized by slow adoption of new technologies, recently, the European Medicines Agency (EMA) took the lead in pushing for process improvements using technologies already established in other manufacturing sectors. Foremost among these technologies, robotics is a technological driver, and its implementation in the pharma field should cause a big change, probably within the next 5 years. This paper aims at describing the regulation changes mainly in aseptic manufacturing and the use of robotics in the pharmaceutical environment to fulfill GMP (good manufacturing practice). Special attention is therefore paid at first to the regulatory aspect, explaining the reasons behind the current changes, and then to the use of robotics that will characterize the future of manufacturing especially in aseptic environments, moving from a clear overview of robotics to the use of automated systems to design more efficient processes, with reduced risk of contamination. This review should clarify the regulation and technological scenario and provide pharmaceutical technologists with basic knowledge in robotics and automation, as well as engineers with regulatory knowledge to define a common background and language, and enable the cultural shift of the pharmaceutical industry.

Does adjunctive chemotherapy reduce remission rates compared to cortisone alone in unifocal or multifocal histiocytosis of bone?

BACKGROUND: Langerhans cell histiocytosis (LCH) is a rare disorder that can affect almost any organ, including bone. Treatment options include local corticosteroid infiltration in isolated bone lesions and oral corticosteroids and chemotherapy in multifocal bone lesions. Several studies show local corticosteroid injection in unifocal bone lesions heal in more than 75% of patients with minimal side effects. Therefore, it is unclear whether chemotherapy adds materially to the healing rate. QUESTIONS/PURPOSES: We therefore compared overall survival, remission rate, and recurrence rate in patients with bone LCH treated with chemotherapy and corticosteroids or corticosteroids alone. METHODS: We retrospectively reviewed the records of 198 patients with LCH since 1950. Median age at diagnosis was 5 years, male-to-female ratio was 1.33, and the most frequent symptom was local pain (95%). We recorded the disease presentation, demographics, treatment, and clinical evolution of each patient. Minimum followup was 4 months (median, 24 months; range, 4-360 months). RESULTS: The survival rate of the systemic disease group was 76.5% (65 of 85) while the survival rate in the unifocal and multifocal bone involvement groups was 100% at a median 5-year followup. All patients with unifocal bone involvement and 40 of 43 (93%) with multifocal bone involvement had complete remission. One of 30 patients with multifocal bone involvement treated with chemotherapy and oral corticosteroids did not achieve remission whereas two of six receiving only corticosteroids did not achieve remission. CONCLUSIONS: Our observations suggest intralesional corticosteroid injection without adjunctive chemotherapy achieves remission in unifocal bone LCH but may not do so in multifocal single-system bone involvement. Larger series would be required to confirm this observation. LEVEL OF EVIDENCE: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Development of sponge-like dressings for mucosal/transmucosal drug delivery into vaginal cavity.

The aim of the present work was the development of vaginal sponge-like dressings based on chitosan ascorbate (CS) and on hyaluronic acid sodium salt/lysine acetate (HAS) combination. Sponge-like dressings were prepared by freeze-drying and characterized for mechanical resistance and mucoadhesion. CS dressings show higher mechanical and mucoadhesion properties in comparison with HAS dressing. The enzymatic inhibition properties of the dressings were evaluated in vitro against carboxipeptidase A in view of their employment for vaginal delivery of peptidic drugs. All the dressings were able to inhibit carboxipeptidase activity; CS dressings, independently of polymer MW, completely inhibited enzyme activity. Release and penetration enhancement properties of the dressings loaded with a high molecular weight hydrophilic molecule, fluorescein isothiocyanate dextran (FD4), were assessed. CS dressings were able to prolong FD4 release. All the dressings showed penetration enhancement properties into pig vaginal mucosa although to a different extent: greater for dressings based on CS than for that containing HAS. Moreover, CS dressings demonstrated intrinsic antimicrobial properties. The suitability of sponge-like systems for the treatment of vaginal infections was assessed by loading the CS dressing characterized by the best mechanical and antimicrobial properties with an antibiotic drug (clyndamicin-2-phosphate) and by checking drug release.

Inorganic Nanomaterials in Tissue Engineering.

In recent decades, the demand for replacement of damaged or broken tissues has increased; this poses the attention on problems related to low donor availability. For this reason, researchers focused their attention on the field of tissue engineering, which allows the development of scaffolds able to mimic the tissues' extracellular matrix. However, tissue replacement and regeneration are complex since scaffolds need to guarantee an adequate hierarchical structured morphology as well as adequate mechanical, chemical, and physical properties to stand the stresses and enhance the new tissue formation. For this purpose, the use of inorganic materials as fillers for the scaffolds has gained great interest in tissue engineering applications, due to their wide range of physicochemical properties as well as their capability to induce biological responses. However, some issues still need to be faced to improve their efficacy. This review focuses on the description of the most effective inorganic nanomaterials (clays, nano-based nanomaterials, metal oxides, metallic nanoparticles) used in tissue engineering and their properties. Particular attention has been devoted to their combination with scaffolds in a wide range of applications. In particular, skin, orthopaedic, and neural tissue engineering have been considered.

Spermidine Crosslinked Gellan Gum-Based "Hydrogel Nanofibers" as Potential Tool for the Treatment of Nervous Tissue Injuries: A Formulation Study.

Purpose: Aim of the work was to develop a potential neural scaffold, endowed with neuroprotective and neuroregenerative potential, to be applied at the site of nervous tissue injuries: nanofibers, consisting of gellan gum (GG), spermidine (SP) and gelatin (GL), were prepared via electrospinning. SP was selected for its neuroprotective activity and cationic nature that makes it an ideal GG cross-linking agent. GL was added to improve the scaffold bioactivity. Methods: Mixtures, containing 1.5% w/w GG and increasing SP concentrations (0-0.125% w/w), were prepared to investigate GG/SP interaction and, thus, to find the best mixture to be electrospun. Mixture rheological and mechanical properties were assessed. The addition of 0.1% w/w GL was also investigated. The most promising GG/SP/GL mixtures were added with poly(ethylene oxide) (PEO) and poloxamer (P407) and, then, electrospun. The resulting fibers were characterized in terms of size and mechanical properties and fiber morphology was observed after soaking in water for 24 hours. Nanofiber biocompatibility was assessed on Schwann cells. Results: More and more structured GG/SP mixtures were obtained by increasing SP concentration, proving its cross-linking potential. After blending with PEO and P407, the mixture consisting of 1.5% w/w GG, 0.05% w/w SP and 0.1% w/w GL was electrospun. The resulting nanofibers appeared homogenous and characterized by a plastic behavior, suggesting a good mechanical resistance when applied at the injury site. Nanofibers were insoluble in aqueous media and able to form a thin gel layer after hydration. GG/SP/GL nanofibers showed a higher compatibility with Schwann cells than GG/SP ones. Conclusion: SP and GL allowed the production of homogenous GG-based nanofibers, which preserved their structure after contact with aqueous media and showed a good compatibility with a neural cell line. After local application at the injury site, nanofibers should support and guide axonal outgrowth, releasing SP in a controlled manner.

Development of alginate-spermidine micro/nanogels as potential antioxidant and anti-inflammatory tool in peripheral nerve injuries. Formulation studies and physico-chemical characterization.

The development of a successful strategy to ensure a full recovery in patients affected by peripheral nerve injury (PNI), one of the most debilitating pathologies, is, still today, a major clinical challenge. Herein, spermidine (SP), an endogenous polyamine, is employed with a dual role: as cross-linking agent for alginate (ALG) and as antioxidant and anti-inflammatory compound. In particular, micro/nanogels based on the ionic interaction between ALG and SP were obtained via ionotropic gelation. Different ALG concentrations and viscosity grades and different SP concentrations were considered. The influence of such variables on micro/nanogels size was investigated by means of a Design of Experiments (DoE) approach (full factorial design). The formation of micro/nanogels was proved by Scanning Electron Microscope (SEM) analysis and by rheological and profilometry measurements. Fourier Transform Infrared (FTIR) measurements performed on nanogels of optimal composition confirmed SP-ALG interaction. The addition of trehalose as cryoprotectant agent to nanogel dispersion was considered in view of the employment of freeze-drying process to obtain a stable product. Moreover, in vitro studies on Schwann cells proved the ability of SP of expressing antioxidant and anti-inflammatory properties, even if involved in the formation of nanogels.

Maltodextrin-amino acids electrospun scaffolds cross-linked with Maillard-type reaction for skin tissue engineering.

The goal of this work is the design and the development of scaffolds based on maltodextrin (MD) to recover chronic lesions. MD was mixed with arginine/lysine/polylysine and the electrospinning was successfully used to prepare scaffolds with uniform and continuous nanofibers having regular shape and smooth surface. A thermal treatment was applied to obtain insoluble scaffolds in aqueous environment, taking the advantage of amino acids-polysaccharide conjugates formed via Maillard-type reaction. The morphological analysis showed that the scaffolds had nanofibrous structures, and that the cross-linking by heating did not significantly change the nanofibers' dimensions and did not alter the system stability. Moreover, the heating process caused a reduction of free amino group and proportionally increased scaffold cross-linking degree. The scaffolds were elastic and resistant to break, and possessed negative zeta potential in physiological fluids. These were characterized by direct antioxidant properties and Fe2+ chelation capability (indirect antioxidant properties). Moreover, the scaffolds were cytocompatible towards fibroblasts and monocytes-derived macrophages, and did not show any significant pro-inflammatory activity. Finally, those proved to accelerate the recovery of the burn/excisional wounds. Considering all the features, MD-poly/amino acids scaffolds could be considered as promising medical devices for the treatment of chronic wounds.

Platelet lysate mucohadesive formulation to treat oral mucositis in graft versus host disease patients: a new therapeutic approach.

Optimal treatment of oral mucositis (OM) due to graft versus host disease (GvHD) is currently not available. Platelet-derived growth factors (PDGFs) have high capability for tissue healing and may play a role in repairing the mucosal barrier. The aim of the present work was to develop a mucoadhesive formulation to administer platelet lysate to oral cavity prolonging contact time of platelet lysate with oral mucosa. The mucoadhesive formulation was characterized for in vitro properties (PDGF-AB concentration, mucoadhesive properties, cytotoxicity, fibroblast proliferation, wound healing). Moreover, a preliminary clinical study on seven GvHD patients with OM refractory to other therapies was conducted, to evaluate feasibility, safety, and efficacy. GVPL (mucoadhesive gel vehicle mixed with platelet lysate)showed good mucoadhesive properties; additionally, it was characterized by good biocompatibility in vitro on fibroblasts and it was able to enhance fibroblast proliferation and wound healing, maintaining the efficacy for up to 14 days following storage at 2-8°C. In vivo, clinical response was good-to-complete in five, fair in one, none in the remaining one. The in vitro results indicate that GVPL has optimal mucoadhesive and healing enhancer properties, maintained over time (up to 14 days); preliminary clinical results suggest that oral application of platelet lysate-loaded mucoadhesive formulation is feasible, safe, well tolerated, and effective. A larger controlled randomized study is needed.

Innovative Strategies in Tendon Tissue Engineering.

The tendon is a highly aligned connective tissue that transmits force from muscle to bone. Each year, more than 32 million tendon injuries have been reported, in fact, tendinopathies represent at least 50% of all sports injuries, and their incidence rates have increased in recent decades due to the aging population. Current clinical grafts used in tendon treatment are subject to several restrictions and there is a significant demand for alternative engineered tissue. For this reason, innovative strategies need to be explored. Tendon replacement and regeneration are complex since scaffolds need to guarantee an adequate hierarchical structured morphology and mechanical properties to stand the load. Moreover, to guide cell proliferation and growth, scaffolds should provide a fibrous network that mimics the collagen arrangement of the extracellular matrix in the tendons. This review focuses on tendon repair and regeneration. Particular attention has been devoted to the innovative approaches in tissue engineering. Advanced manufacturing techniques, such as electrospinning, soft lithography, and three-dimensional (3D) printing, have been described. Furthermore, biological augmentation has been considered, as an emerging strategy with great therapeutic potential.

Chitosan Oleate Coated PLGA Nanoparticles as siRNA Drug Delivery System.

Oligonucleotide therapeutics such as miRNAs and siRNAs represent a class of molecules developed to modulate gene expression by interfering with ribonucleic acids (RNAs) and protein synthesis. These molecules are characterized by strong instability and easy degradation due to nuclease enzymes. To avoid these drawbacks and ensure efficient delivery to target cells, viral and non-viral vectors are the two main approaches currently employed. Viral vectors are one of the major vehicles in gene therapy; however, the potent immunogenicity and the insertional mutagenesis is a potential issue for the patient. Non-viral vectors, such as polymeric nanocarriers, provide a safer and more efficient delivery of RNA-interfering molecules. The aim of this work is to employ PLGA core nanoparticles shell-coated with chitosan oleate as siRNA carriers. An siRNA targeted on HIV-1, directed against the viral Tat/Rev transcripts was employed as a model. The ionic interaction between the oligonucleotide's moieties, negatively charged, and the positive surface charges of the chitosan shell was exploited to associate siRNA and nanoparticles. Non-covalent bonds can protect siRNA from nuclease degradation and guarantee a good cell internalization and a fast release of the siRNA into the cytosolic portion, allowing its easy activation.