PopTouch: A Submillimeter Thick Dynamically Reconfigured Haptic Interface with Pressable Buttons.

The interactions with touchscreens rely heavily on vision: The virtual buttons and virtual sliders on a touchscreen provide no mechanical sense of the object they seek to represent. This work presents PopTouch: a 500 µm thick flexible haptic display that creates pressable physical buttons on demand. PopTouch can be mounted directly on touchscreens or any other smooth surface, flat, or curved. The buttons of PopTouch are independently controlled hydraulically amplified electrostatic zipping taxels (tactile pixels) that generate 1.5 mm of out of plane displacement. When pressed by the user, the buttons provide intuitive mechanical feedback thanks to a snap-through characteristic in their force-displacement profile. The snap-through threshold can be as high as 4 N, and is tuned by design and actuation parameters. This work presents two versions of PopTouch: a transparent PopTouch for integration on Touchscreens with built-in touch sensing, such as smartphones and a sensorized PopTouch, with embedded thin-film piezoelectric sensors on each taxel, for integration on substrates without built-in touch sensing, such as a steering wheel. PopTouch adds static and vibrating button-like haptics to any device thanks to its thin profile, flexibility, low power consumption (6 mW per button), rapid refresh rate (2 Hz), and freely configured array format.

Dynamic control of high-voltage actuator arrays by light-pattern projection on photoconductive switches.

The ability to control high-voltage actuator arrays relies, to date, on expensive microelectronic processes or on individual wiring of each actuator to a single off-chip high-voltage switch. Here we present an alternative approach that uses on-chip photoconductive switches together with a light projection system to individually address high-voltage actuators. Each actuator is connected to one or more switches that are nominally OFF unless turned ON using direct light illumination. We selected hydrogenated amorphous silicon (a-Si:H) as our photoconductive material, and we provide a complete characterization of its light to dark conductance, breakdown field, and spectral response. The resulting switches are very robust, and we provide full details of their fabrication processes. We demonstrate that the switches can be integrated into different architectures to support both AC and DC-driven actuators and provide engineering guidelines for their functional design. To demonstrate the versatility of our approach, we demonstrate the use of the photoconductive switches in two distinctly different applications-control of µm-sized gate electrodes for patterning flow fields in a microfluidic chamber and control of cm-sized electrostatic actuators for creating mechanical deformations for haptic displays.

3D Printed Motor-Sensory Module Prototype for Facial Rehabilitation.

This work demonstrates the first 3D printed wearable motor-sensory module prototype designed for facial rehabilitation, focusing on facial paralysis. The novelty of the work lies in the fast fabrication of the first fully soft working prototype, including feedback control, with a focus on the methodology for individual customization. Facial paralysis results from a variety of conditions, and more wearable and modular technologies are needed to address the complexity of facial movement rehabilitation. Smiling muscles are especially important for both expression and eating, and so this work focuses on this motion as an example of how the module can be applied to mimic and support needed muscle movement. A generalized actuator-sensor pair with a feedback control system is created to translate signals from smiling on the healthy side of the face (notably temporal and zygomatic branch) to actuation on the paralyzed side of the face for augmented physiotherapy. Fabric and a sensor fluid are integrated during the silicone printing process to create a multicomponent wearable that is ready to use with minimal postprocessing. The actuators' force and vertical contraction results under a 0.98 and 1.96 N load meet the 1-7 N requirements needed for smiling. It is a challenge to measure soft surface-based force and contraction ratio consistently; therefore, a novel modular surface is designed to simulate the interaction of skin and bone using 3D printed hard plastic (bone) and a silicone sheet (skin). The actuator is tested on top of four different repeatable and standardized surface morphologies, and results reveal that the actuator force application will vary based on topography and hardness of the facial surface. Demonstration of the complete system on the face while collecting sensor and pressure data serves as a proof-of-concept and motivates potential applications in rapid customization of highly specialized soft wearable orthotics, prosthetics, and rehabilitation devices. This unique actuator-sensor combination can have additional applications for wearables due to the (1) customizability, (2) closed-loop control, and (3) unique "grounding" test platform.