Heterocycles via SiCl4-Promoted Isocyanide Additions to Oxonitriles.

SiCl4 promotes isocyanide additions to oxoalkenenitriles to selectively generate 3-acylpyrroles, 2-aminofurans, or pyrrolidinones. Cyclic oxoalkenenitriles add 2 equiv of an isocyanide that installs the two core atoms of an acylpyrrole and a nitrile substituent, whereas acyclic oxoalkenenitriles add 1 equiv of an isocyanide to afford 2-aminofurans; subsequent air oxidation generates pyrrolidinones via a furan oxygenation-cleavage-cyclization sequence. The syntheses proceed under mild conditions to rapidly access three richly decorated heterocycles.

One-Pot Syntheses of Substituted Oxazoles and Imidazoles from the Isocyanide Asmic.

Substituted oxazoles and imidazoles are synthesized in one pot from the isocyanide building block Asmic (anisylsulfanylmethyl isocyanide), an alkyl halide, and an acid chloride or nitrile, respectively. The modular assembly employs sequential deprotonation-alkylation and deprotonation-acylation or imination of Asmic, followed by an unusual carbon-sulfur bond cleavage to construct the azole. The strategy is robust, highly efficient, and affords C4-C5 disubstituted oxazoles or imidazoles in a single operation.

Oxidative DMSO Cyclization Cascade to Bicyclic Hydroxyketonitriles.

Thermolysis of ω-iodoalkyl-ß-siloxyalkenenitriles in DMSO triggers an oxidative cyclization cascade that affords highly oxygenated hydrindanones, decalones, and undecanones. The cyclization cascade is highly unusual on three counts: the cyclization installs a contiguous array of tertiary-quaternary-tertiary centers, thermolysis equilibrates a quaternary center, and the enolsilyl ether crossed-aldol proceeds without a catalyst.

Copper-Catalyzed Conjugate Additions to Isocyanoalkenes.

A copper iodide-Pyox complex catalyzes the first conjugate addition of diverse sulfur, nitrogen, and carbon nucleophiles to isocyanoalkenes. The anionic addition generates metalated isocyanoalkanes capable of SNi displacements, providing a rapid route to a series of functionalized, cyclic isocyanoalkanes. The Cu(I)I-Pyox complex efficiently catalyzes a first-in-class conjugate addition affording a range of complex, functionalized isocyanoalkanes that are otherwise challenging to synthesize while laying a foundation for catalytic reactions that maintain the isocyanide group.

Sunk-Cost Bias and Knowing When to Terminate a Research Project.

Scientific research is an open-ended quest where success usually triumphs over failure. The tremendous success of science obscures the tendency for the non-linear discovery process to take longer and cost more than expected. Perseverance through detours and past setbacks requires a significant commitment that is fueled by scientific optimism; the same optimism required to overcome challenges simultaneously exacerbates the very human tendency to continue a line of inquiry when the likelihood of success is minimal, the so-called sunk-cost bias. This Viewpoint Article shows how the psychological phenomenon of sunk-cost bias influences medicinal, pharmaceutical, and organic chemists by comparing how the respective industrial and academic practitioners approach sunk-cost bias; a series of interviews and illustrative quotes provide a rich trove of data to address this seldom discussed, yet potentially avoidable research cost. The concluding strategies recommended for mitigating against sunk-cost bias should benefit not only medicinal, pharmaceutical, and organic chemists but a wide array of chemistry practitioners.

One-step synthesis of imidazoles from Asmic (anisylsulfanylmethyl isocyanide).

Substituted imidazoles are readily prepared by condensing the versatile isocyanide Asmic, anisylsulfanylmethylisocyanide, with nitrogenous π-electrophiles. Deprotonating Asmic with lithium hexamethyldisilazide effectively generates a potent nucleophile that efficiently intercepts nitrile and imine electrophiles to afford imidazoles. In situ cyclization to the imidazole is promoted by the conjugate acid, hexamethyldisilazane, which facilitates the requisite series of proton transfers. The rapid formation of imidazoles and the interchange of the anisylsulfanyl for hydrogen with Raney nickel make the method a valuable route to mono- and disubstituted imidazoles.

Asmic Isocyanide [3 + 2] Cascade to Dihydrooxazoles and Dihydroimidazoles.

The versatile isocyanide building block Asmic, anisylsulfanylmethylisocyanide, reacts with aldehydes and ketones in a BF3·OEt2-mediated condensation to afford thioimidoyl-substituted 2,5-dihydrooxazoles. The condensation is distinguished from related base and transition-metal-catalyzed [3 + 2] processes in proceeding via the condensation of aldehydes and ketones with 2 equiv of an isocyanide followed by a molecular rearrangement that installs four new bonds. BF3·OEt2 mediates an analogous condensation of Asmic with imines to generate N-substituted dihydroimidazoles. Mechanistically, BF3·OEt2 activates the isocyanide to facilitate deprotonation evolving to a zwitterion that traps π-electrophiles in a formal [3 + 2] process. A second deprotonation-condensation with Asmic initiates a structural rearrangement involving a sulfanyl elimination-addition transposition sequence. The resulting dihydrooxazoles and dihydroimidazoles contain a thioimidate that serves as a diversification point for further elaboration.

Metalated isocyanides: formation, structure, and reactivity.

Metalated isocyanides are highly versatile organometallics. Central to the reactivity of metalated isocyanides is the presence of two orthogonally reactive carbons, a highly nucleophilic "carbanion" inductively stabilized by a carbene-like isocyanide carbon. The two reactivities are harnessed in the attack of metalated isocyanides on π-electrophiles where an initial nucleophilic attack leads to an electron pair that cyclizes onto the terminal isocyanide carbon in a rapid route to diverse, nitrogenous heterocycles. Harnessing the potent nucleophilicity of metalated isocyanides while preventing electrophilic attack on the terminal isocyanide carbon has largely been driven by empirical heuristics. This review provides a foundational understanding by surveying the formation, structure, and properties of metalated isocyanides. The focus on the interplay between the structure and reactivity of metalated isocyanides is anticipated to facilitate the development and deployment of these exceptional nucleophiles in complex bond constructions.

C- and N-Metalated Nitriles: The Relationship between Structure and Selectivity.

Metalated nitriles are exceptional nucleophiles capable of forging highly hindered stereocenters in cases where enolates are unreactive. The excellent nucleophilicity emanates from the powerful inductive stabilization of adjacent negative charge by the nitrile, which has a miniscule steric demand. Inductive stabilization is the key to understanding the reactivity of metalated nitriles because this permits a continuum of structures that range from N-metalated ketenimines to nitrile anions. Solution and solid-state analyses reveal two different metal coordination sites, the formally anionic carbon and the nitrile nitrogen, with the site of metalation depending intimately on the solvent, counterion, temperature, and ligands. The most commonly encountered structures, C- and N-metalated nitriles, have either sp3 or sp2 hybridization at the nucleophilic carbon, which essentially translates into two distinct organometallic species with similar but nonidentical stereoselectivity, regioselectivity, and reactivity preferences. The hybridization differences are particularly important in SNi displacements of cyclic nitriles because the orbital orientations create very precise trajectories that control the cyclization selectivity. Harnessing the orbital differences between C- and N-metalated nitriles allows selective cyclization to afford nitrile-containing cis- or trans-hydrindanes, decalins, or bicyclo[5.4.0]undecanes. Similar orbital constraints favor preferential SNi displacements with allylic electrophiles on sp3 centers over sp2 centers. The strategy permits stereoselective displacements on secondary centers to set contiguous tertiary and quaternary stereocenters or even contiguous vicinal quaternary centers. Stereoselective alkylations of acyclic nitriles are inherently more challenging because of the difficulty in creating steric differentiation in a dynamic system with rotatable bonds. However, judicious substituent placement of vicinal dimethyl groups and a trisubstituted alkene sufficiently constrains C- and N-metalated nitriles to install quaternary stereocenters with excellent 1,2-induction. The structural differences between C- and N-metalated nitriles permit a rare series of chemoselective alkylations with bifunctional electrophiles. C-Magnesiated nitriles preferentially react with carbonyl electrophiles, whereas N-lithiated nitriles favor SN2 displacement of alkyl halides. The chemoselective alkylations potentially provide a strategy for late-stage alkylations of polyfunctional electrophiles en route to bioactive targets. In this Account, the bonding of metalated nitriles is summarized as a prelude to the different strategies for selectively preparing C- and N-metalated nitriles. With this background, the Account then transitions to applications in which C- or N-metalated nitriles allow complementary diastereoselectivity in alkylations and arylations, and regioselective alkylations and arylations, with acyclic and cyclic nitriles. In the latter sections, a series of regiodivergent cyclizations are described that provide access to cis- and trans-hydrindanes and decalins, structural motifs embedded within a plethora of natural products. The last section describes chemoselective alkylations and acylations of C- and N-metalated nitriles that offer the tantalizing possibility of selectively manipulating functional groups in bioactive medicinal leads without recourse to protecting groups. Collectively, the unusual reactivity profiles of C- and N-metalated nitriles provide new strategies for rapidly and selectively accessing valuable synthetic precursors.

Electrophile-Directed Diastereoselective Oxonitrile Alkylations.

Diastereoselective alkylation of prochiral oxonitrile dianions with secondary alkyl halides efficiently installs two contiguous stereogenic centers. The confluence of nucleophilic trajectory and the electrophile chirality causes distinct steric differences that allow efficient discrimination for one of the six possible conformers. Numerous oxonitrile-derived dianions efficiently displace secondary alkyl halides propagating the electrophile chirality to efficiently install two contiguous tertiary centers. The prevalence of chiral, secondary electrophiles makes the interdigitated alkylation of chiral electrophiles a particularly attractive route because the resulting oxonitriles are readily transformed into bioactive heterocycles.

Electrophile-Dependent Alkylations of Lithiated 4-Alkoxyalk-4-enenitriles.

Alkylations of acyclic, lithiated 4-alkoxyalk-4-enenitriles are highly diastereoselective with an unusual electrophile-dependent preference. Alkyl halides, sulfur, chlorine, and acyl cyanide electrophiles intercept a series of lithiated 4-alkoxyalk-4-enenitriles to install contiguous tertiary-quaternary stereocenters with high diastereoselectivity, whereas acylations with ester and carbonate electrophiles are modestly selective. The diastereoselectivity is consistent with electrophilic attack on the most accessible face of the lithated nitrile for most electrophiles except ester and carbonate electrophiles, which likely precoordinate the lithiated nitrile before acylation. Intercepting the lithiated 4-alkoxyalk-4-enenitriles with a range of electrophiles provide insight into the criteria for otherwise challenging diastereoselective alkylations and acylations of acyclic nitriles.

Alkenyl Isocyanide Conjugate Additions: A Rapid Route to γ-Carbolines.

Isocyanides are exceptional building blocks, the wide deployment of which in multicomponent and metal-insertion reactions belies their limited availability. The first conjugate addition/alkylation to alkenyl isocyanides is described, which addresses this deficiency. An array of organolithiums, magnesiates, enolates, and metalated nitriles add conjugately to ß- and ß,ß-disubstituted arylsulfonyl alkenyl isocyanides to rapidly assemble diverse isocyanide scaffolds. The intermediate metalated isocyanides are efficiently trapped with electrophiles to generate substituted isocyanides incorporating contiguous tri- and tetra-substituted centers. The substituted isocyanides are ideally functionalized for elaboration into synthetic targets as illustrated by the three-step synthesis of γ-carboline N-methyl ingenine B.

Sulfone-Metal Exchange and Alkylation of Sulfonylnitriles.

The first general sulfone-metal exchange is described. Treating substituted 2-pyridylsulfonylacetonitriles with either BuLi or Bu3 MgLi generates metalated nitriles that efficiently intercept a variety of electrophiles to afford quaternary nitriles. The 2-pyridylsulfone is critical for the sulfone-metal exchange because chelation anchors the organometallic proximal to the electrophilic, tetrasubstituted sulfone to override complex-induced deprotonation. Alkylating commercial 2-pyridinesulfonylacetonitrile with mild bases, either K2 CO3 or DBU, and subsequent sulfone-metal exchange and alkylation rapidly assembles quaternary nitriles by three alkylations, only one of which requires an organometallic reagent.

Direct Conversion of Nitriles into Alkene "Isonitriles".

The sequenced addition of RLi to nitriles, trapping with isopropylformate, and dehydration with phosphoryl chloride provides an efficient, direct synthesis of alkene isocyanides. The one-pot sequence involves a series of carefully orchestrated steps: addition, formylation, tautomerization, and dehydration, with CuCN catalyzing a key equilibration of a formyl imine to an N-formyl enamine. The resulting aromatic alkeneisocyanides, that are otherwise challenging to synthesize, engage in an unusual [4+2]-type cycloaddition/1,3-H shift/decyanation sequence to afford substituted naphthalenes.

Metalated nitriles: SNi' cyclizations with a propargylic electrophile.

A rare 5-exo-dig SNi' cyclization with magnesiated and lithiated nitriles affords a cis-fused hydrindane bearing an exocyclic allene. The cyclization of the dilithiated nitrile pits a stereoelectronic preference for a trans-hydrindane against a cyclization through a less strained transition structure to the corresponding cis-hydrindane. Computational modeling suggests that the dilithiated nitrile cyclizes to a cis-hydrindane because the preferred transition structure positions the lithium cation in a cone of electron density that bridges the nitrile-bearing carbon, an alkoxide, and an electron-rich alkyne functionality.

Alkyl Sulfinates: Formal Nucleophiles for Synthesizing TosMIC Analogs.

Alkyl sulfinates function as formal nucleophiles in Mannich-type reactions to give sulfonyl formamides, which are readily dehydrated to the corresponding sulfonylmethyl isonitriles. The efficient, two-step synthesis provides a general route to sulfonylmethyl isonitriles from readily available methyl sulfinates or thiols. Mechanistic analysis reveals that the unusual nucleophlicity of the alkyl sulfinates arises from the in situ release of sulfinic acids.

Catalytic Isonitrile Insertions and Condensations Initiated by RNC-X Complexation.

Isonitriles are delicately poised chemical entities capable of being coaxed to react as nucleophiles or electrophiles. Directing this tunable reactivity with metal and non-metal catalysts provides rapid access to a large array of complex nitrogenous structures ideally functionalized for medicinal applications. Isonitrile insertion into transition metal complexes has featured in numerous synthetic and mechanistic studies, leading to rapid deployment of isonitriles in numerous catalytic processes, including multicomponent reactions (MCR). Covering the literature from 1990-2014, the present review collates reaction types to highlight reactivity trends and allow catalyst comparison.

Interrupted SNAr-Alkylation Dearomatization.

Dearomatizations provide powerful synthetic routes to rapidly assemble substituted carbocycles and heterocycles found in a plethora of bioactive molecules. Harnessing the advantages of dearomatization typically requires vigorous reagents because of the difficulty in disrupting the stable aromatic core. A relatively mild dearomatization strategy is described that employs lithiated nitriles or isocyanides in a simple SNAr-type addition to form σ-complexes that are trapped by alkylation. The dearomatizations are diastereoselective and efficient and rapidly install two new carbon-carbon bonds, one of which is a quaternary center, as well as nitrile, isocyanide, and cyclohexadiene functionalities.

Sulfinylnitriles: sulfinyl-metal exchange-alkylation strategies.

Adding organolithiums, Grignard reagents, or zincates to sulfinylnitriles triggers a facile sulfinyl-metal exchange to afford N- or C-metalated nitriles. Sulfinyl-magnesium exchange-alkylations efficiently install quaternary and tertiary centers, even in the case of tertiary sulfinylnitriles that contain a highly acidic methine proton. α-Sulfinylalkenenitriles afford moderately nucleophilic magnesiated nitriles, and the reactivity can be dramatically increased by conversion to the corresponding magnesiates. The sulfinyl-metal exchange is extremely fast, proceeds efficiently with quaternary, tertiary, and vinylic α-sulfinylnitriles, and exhibits an exceptional functional group tolerance in nitrile alkylations.

Dithiolopyranthione Synthesis, Spectroscopy and an Unusual Reactivity with DDQ.

The bicyclic pyran thiolone tetrahydro-3αH-[1,3]dithiolo[4,5-ß]pyran-2-thione (3a) engages in a highly unusual fragmentation in the presence of DDQ. The pyran thiolone, 3a, was synthesized by chlorination of 3,4-dihydro-2H-pyran (1), followed by condensing with CS2 and NaSH. Reaction of 3a with DDQ generates the isomerized pyran thiolone tetrahydro-3αH-[1,3]dithiolo[4,5-ß]pyran-2-thione (3b) and 4-benzyl-5-(3-hydroxypropyl)-1,3-dithiole-2-thione (4) via a deep-seated rearrangement. The identity of 3b was confirmed by single crystal X-ray analysis: P21/c, a=5.807(9) Å, b = 12.99(2) Å, c = 11.445(15), ß=113.23(6)°. Mechanistic experiments and computational insight is used to explain the likely sequence of events in the highly unusual formation of 4. Collectively, these results establish fundamental reactivity patterns for further research in this area.