Line-field confocal optical coherence tomography for in vivo visualization of morphological characteristics of squamous cell carcinoma in a murine model.

OBJECTIVES: Non-invasive imaging with line-field confocal optical coherence tomography (LC-OCT) can support the diagnosis of squamous cell carcinoma (SCC) through visualization of morphological characteristics specific to skin cancer. We aimed to visualize prominent morphological characteristics of SCC using LC-OCT in a well-established murine SCC model. MATERIALS AND METHODS: Nine hairless mice were exposed to ultraviolet radiation three times weekly for 9 months to induce SCC development. Visible SCC tumors (n = 9) were imaged with LC-OCT and the presence of 10 well-described morphological characteristics of SCC were evaluated in the scans by two physicians with adjudication by a third. RESULTS: Overall, murine morphological characteristics resembled corresponding features previously reported in human SCCs. Interrupted dermal-epidermal junction occurred in 100% of tumors. In epidermis, the most frequently observed characteristics were severe epidermal dysplasia (100%) and tumor budding (89%). Common dermal characteristics included broad strands (100%) and collagen alterations (78%). CONCLUSION: LC-OCT imaging can be used to non-invasively visualize morphological characteristics specific to SCC in an in vivo preclinical model.

Pulmonary Administration of the Liposome-Based Adjuvant CAF01: Effect of Surface Charge on Mucosal Adjuvant Function.

Mucosal surfaces of the lungs represent a major site of entry for airborne pathogens, and pulmonary administration of vaccines is an attractive strategy to induce protective mucosal immunity in the airways. Recently, we demonstrated the potential of pulmonary vaccination with the tuberculosis subunit antigen H56 adjuvanted with the cationic liposomal adjuvant formulation CAF01, which consists of the cationic lipid dimethyldioctadecylammonium (DDA) bromide and the synthetic cord factor trehalose-6,6'-dibehenate. However, the cationic charge of DDA represents a major safety challenge. Hence, replacing DDA with a safer zwitterionic or anionic phospholipid is an attractive approach to improve vaccine safety, but the effect of liposomal surface charge on the induction of mucosal immunity after airway immunization is poorly understood. Here, we investigated the effect of surface charge by replacing the cationic DDA component of CAF01 with zwitterionic dipalmitoylphosphatidylcholine (DPPC) or anionic dipalmitoylphosphatidylglycerol (DPPG), and we show that charge modification enhances antigen-specific pulmonary T-cell responses against co-formulated H56. We systematically replaced DDA with either DPPC or DPPG and found that these modifications resulted in colloidally stable liposomes that have similar size and morphology to unmodified CAF01. DPPC- or DPPG-modified CAF01 displayed surface charge-dependent protein adsorption and induced slightly higher follicular helper T cells and germinal center B cells in the lung-draining lymph nodes than unmodified CAF01. In addition, modified CAF01 induced significantly higher levels of H56-specific Th17 cells and polyfunctional CD4+ T cells in the lungs, as compared to unmodified CAF01. However, the strong H56-specific humoral responses induced by CAF01 in the lungs and spleen were not influenced by surface charge. Hence, these results provide insights into the importance of surface charge for liposomal adjuvant function and can also guide the design of safe pulmonary subunit vaccines against other mucosal pathogens.

Macrophage Phosphoproteome Analysis Reveals MINCLE-dependent and -independent Mycobacterial Cord Factor Signaling.

Immune sensing of Mycobacterium tuberculosis relies on recognition by macrophages. Mycobacterial cord factor, trehalose-6,6'-dimycolate (TDM), is the most abundant cell wall glycolipid and binds to the C-type lectin receptor (CLR) MINCLE. To explore the kinase signaling linking the TDM-MINCLE interaction to gene expression, we employed quantitative phosphoproteome analysis. TDM caused upregulation of 6.7% and suppressed 3.8% of the 14,000 phospho-sites identified on 3727 proteins. MINCLE-dependent phosphorylation was observed for canonical players of CLR signaling (e.g. PLCγ, PKCδ), and was enriched for PKCδ and GSK3 kinase motifs. MINCLE-dependent activation of the PI3K-AKT-GSK3 pathway contributed to inflammatory gene expression and required the PI3K regulatory subunit p85α. Unexpectedly, a substantial fraction of TDM-induced phosphorylation was MINCLE-independent, a finding paralleled by transcriptome data. Bioinformatics analysis of both data sets concurred in the requirement for MINCLE for innate immune response pathways and processes. In contrast, MINCLE-independent phosphorylation and transcriptome responses were linked to cell cycle regulation. Collectively, our global analyses show substantial reprogramming of macrophages by TDM and reveal a dichotomy of MINCLE-dependent and -independent signaling linked to distinct biological responses.

Thermo-Mechanical Fractional Injury Enhances Skin Surface- and Epidermis- Protoporphyrin IX Fluorescence: Comparison of 5-Aminolevulinic Acid in Cream and Gel Vehicles.

BACKGROUND AND OBJECTIVES: Thermo-mechanical fractional injury (TMFI) impacts the skin barrier and may increase cutaneous drug uptake. This study investigated the potential of TMFI in combination with 5-aminolevulinic acid (ALA) cream and gel formulations to enhance Protoporphyrin IX (PpIX) fluorescence at the skin surface and in the skin. STUDY DESIGN/MATERIALS AND METHODS: In healthy volunteers (n = 12) a total of 144 test areas were demarcated on the upper back. Test areas were randomized to (i) TMFI (6 milliseconds, 400 µm at a single pass) or no pretreatment and (ii) 20% ALA in cream or gel formulations. Skin surface PpIX fluorescence was quantified by PpIX fluorescence photography and photometry in 30-minute intervals until 3 hours. PpIX fluorescence microscopy quantified separate PpIX fluorescence in the epidermis, and in superficial-, mid-, and deep- dermis from punch biopsies sampled after 3 hours of ALA incubation. Local skin reactions (LSR) and pain intensities (numerical rating scale 0-10) were evaluated immediately, at 3 hours and 14 days after the intervention. RESULTS: TMFI exposure before photosensitizer application significantly increased skin surface PpIX fluorescence, both for ALA cream (TMFI-ALA-cream 7848 arbitrary units [AU] vs. ALA-cream 5441 AU, 3 hours, P < 0.001) and ALA gel (TMFI + ALA-gel 4591 AU vs. ALA-gel 3723 AU, 3 hours, P < 0.001). The TMFI-mediated increase in PpIX fluorescence was similar for ALA-cream and -gel formulations (P = 0.470) at the skin surface. In the epidermis, PpIX fluorescence intensities increased from combination treatment with TMFI and ALA-cream (TMFI + ALA-cream 421 AU vs. ALA-cream 293 AU, P = 0.034) but not from combination with TMFI and ALA-gel (TMI + ALA-gel 264 AU vs. ALA-gel 261 AU, P = 0.791). Dermal fluorescence intensities (superficial-, mid-, or deep dermis) were unaffected by TMFI pretreatment in both ALA-cream and ALA-gel exposed skin (P = 0.339). ALA-cream generally induced higher PpIX fluorescence intensities than ALA-gel (skin surface P < 0.001 and epidermis P < 0.03). TMFI induced low pain intensities (median 3) and mild LSR that were resolved at 14 days follow-up. CONCLUSION: Given the present study design, TMFI, in combination with the standardized application of 20% ALA cream and gel formulations, significantly enhanced skin surface PpIX fluorescence compared to no pretreatment. Additionally, TMFI increased epidermal PpIX fluorescence combined with 20% ALA cream vehicle. Thus, TMFI pretreatment and formulation characteristics exert influence on PpIX fluorescence intensities in normal skin. Lasers Surg. Med. © 2020 Wiley Periodicals LLC.

Design of Gadoteridol-Loaded Cationic Liposomal Adjuvant CAF01 for MRI of Lung Deposition of Intrapulmonary Administered Particles.

Designing effective and safe tuberculosis (TB) subunit vaccines for inhalation requires identification of appropriate antigens and adjuvants and definition of the specific areas to target in the lungs. Magnetic resonance imaging (MRI) enables high spatial resolution, but real-time anatomical and functional MRI of lungs is challenging. Here, we describe the design of a novel gadoteridol-loaded cationic adjuvant formulation 01 (CAF01) for MRI-guided vaccine delivery of the clinically tested TB subunit vaccine candidate H56/CAF01. Gadoteridol-loaded CAF01 liposomes were engineered by using a quality-by-design approach to (i) increase the mechanistic understanding of formulation factors governing the loading of gadoteridol and (ii) maximize the loading of gadoteridol in CAF01, which was confirmed by cryotransmission electron microscopy. The encapsulation efficiency and loading of gadoteridol were highly dependent on the buffer pH due to strong attractive electrostatic interactions between gadoteridol and the cationic lipid component. Optimal gadoteridol loading of CAF01 liposomes showed good in vivo stability and safety upon intrapulmonary administration into mice while generating 1.5-fold MRI signal enhancement associated with approximately 30% T1 relaxation change. This formulation principle and imaging approach can potentially be used for other mucosal nanoparticle-based formulations, species, and lung pathologies, which can readily be translated for clinical use.

Application of a Quality-By-Design Approach to Optimise Lipid-Polymer Hybrid Nanoparticles Loaded with a Splice-Correction Antisense Oligonucleotide: Maximising Loading and Intracellular Delivery.

BACKGROUND: Antisense oligonucleotides (ASOs) are promising therapeutics for specific modulation of cellular RNA function. However, ASO efficacy is compromised by inefficient intracellular delivery. Lipid-polymer hybrid nanoparticles (LPNs) are attractive mediators of intracellular ASO delivery due to favorable colloidal stability and sustained release properties. METHODS: LPNs composed of cationic lipidoid 5 (L5) and poly(DL-lactic-co-glycolic acid) were studied for delivery of an ASO mediating splice correction of a luciferase gene transcript (Luc-ASO). Specific purposes were: (i) to increase the mechanistic understanding of factors determining the loading of ASO in LPNs, and (ii) to optimise the LPNs and customise them for Luc-ASO delivery in HeLa pLuc/705 cells containing an aberrant luciferase gene by using a quality-by-design approach. Critical formulation variables were linked to critical quality attributes (CQAs) using risk assessment and design of experiments, followed by delineation of an optimal operating space (OOS). RESULTS: A series of CQAs were identified based on the quality target product profile. The L5 content and L5:Luc-ASO ratio (w/w) were determined as critical formulation variables, which were optimised systematically. The optimised Luc-ASO-loaded LPNs, defined from the OOS, displayed high loading and mediated splice correction at well-tolerated, lower doses as compared to those required for reference L5-based lipoplexes, L5-modified stable nucleic acid lipid nanoparticles or LPNs modified with dioleoyltrimethylammonium propane (conventional cationic lipid). CONCLUSIONS: The optimal Luc-ASO-loaded LPNs represent a robust formulation that mediates efficient intracellular delivery of Luc-ASO. This opens new avenues for further development of LPNs as a broadly applicable technology platform for delivering nucleic acid cargos intracellularly.

Identification of Factors of Importance for Spray Drying of Small Interfering RNA-Loaded Lipidoid-Polymer Hybrid Nanoparticles for Inhalation.

BACKGROUND: With the recent approval of the first small interfering RNA (siRNA) therapeutic formulated as nanoparticles, there is increased incentive for establishing the factors of importance for the design of stable solid dosage forms of such complex nanomedicines. METHODS: The aims of this study were: (i) to identify factors of importance for the design of spray-dried siRNA-loaded lipidoid-poly(DL-lactic-co-glycolic acid) hybrid nanoparticles (LPNs), and (ii) to evaluate their influence on the resulting powders by using a quality-by-design approach. Critical formulation and process parameters were linked to critical quality attributes (CQAs) using design of experiments, and an optimal operating space (OOS) was identified. RESULTS: A series of CQAs were identified based on the quality target product profile. The loading (ratio of LPNs to the total solid content) and the feedstock concentration were determined as critical parameters, which were optimized systematically. Mannitol was chosen as stabilizing excipient due to the low water content of the resulting powders. The loading negatively affected the colloidal stability of the LPNs, whereas feedstock concentration correlated positively with the powder particle size. The optimal mannitol-based solid formulation, defined from the OOS, displayed a loading of 5% (w/w), mass median aerodynamic diameter of 3.3 ± 0.2 µm, yield of 60.6 ± 6.6%, and a size ratio of 1.15 ± 0.03. Dispersed micro-embedded LPNs had preserved physicochemical characteristics as well as in vitro siRNA release profile and gene silencing, as compared to non-spray-dried LPNs. CONCLUSION: The optimal solid dosage forms represent robust formulations suitable for higher scale-up manufacturing.

Design of Inhalable Solid Dosage Forms of Budesonide and Theophylline for Pulmonary Combination Therapy.

Corticosteroid resistance poses a major challenge to effective treatment of chronic obstructive pulmonary diseases. However, corticosteroid resistance can be overcome by co-administration of theophylline. The aim of this study was to formulate the corticosteroid budesonide with theophylline into inhalable dry powders intended for pulmonary combination therapy. Four types of spray-dried powders were prepared: (i) budesonide and theophylline co-dissolved and processed using a 2-fluid nozzle spray drier, (ii) budesonide nanocrystals and dissolved theophylline co-dispersed and processed using a 2-fluid nozzle spray drier, (iii) dissolved budesonide and dissolved theophylline processed using a 3-fluid nozzle spray drier, and (iv) budesonide nanocrystals and dissolved theophylline processed using a 3-fluid nozzle spray drier. Spray drying from the solutions resulted in co-amorphous (i) and partially amorphous powders (iii), whereas spray drying of the nanosuspensions resulted in crystalline products (ii and iv). Even though budesonide was amorphous in (i) and (iii), it failed to exhibit any dissolution advantage over the unprocessed budesonide. In contrast, the dissolution of budesonide from its nanocrystalline formulations, i.e., (ii) and (iv), was significantly higher compared to a physical mixture or unprocessed budesonide. Furthermore, the spray-dried powders obtained from the 2-fluid nozzle spray drier, i.e., (i) and (ii), exhibited co-deposition of budesonide and theophylline at the same weight ratio in the aerodynamic assessment using the New Generation Impactor. In contrast, the depositions of budesonide and theophylline deviated from the starting weight ratio in the aerodynamic assessment of spray-dried powders obtained from the 3-fluid nozzle spray drier, i.e., (iii) and (iv). Based on these results, the powders spray-dried from the suspension by using the 2-fluid nozzle spray drier, i.e., (ii), offered the best formulation properties given the physically stable crystalline solid-state properties and the co-deposition profile.

Temperature-Induced Self-Assembly of the Group B Streptococcus (GBS) Fusion Antigen GBS-NN.

Group B Streptococcus (GBS) is a leading cause of serious bacterial neonatal infections worldwide, which provides an unmet medical need for a globally effective vaccine. The recombinant GBS fusion antigen GBS-NN contains the N-terminal regions of the GBS Rib and Alpha C proteins. It shows promising immunogenicity eliciting protective immunity in mice and encouraging results in early human clinical trials. Understanding the physical stability of GBS-NN containing conformational B-cell epitopes is crucial to ensure optimal vaccine stability, efficacy, and safety. We initially discovered that GBS-NN is prone to form higher-order structures at elevated temperatures. We therefore investigated the self-assembly behavior of GBS-NN and characterized the higher-order conformational structures as a function of temperature. In the native state, GBS-NN exists as a monomer and has a secondary structure containing α-helix and ß-sheet. Langmuir studies demonstrated that the native protein is highly surface-active and forms a monolayer film at the air-water interface because of its amphipathic properties. The conformational stability of GBS-NN was measured as a function of temperature. GBS-NN has an unusual thermal behavior with a phase transition of approximately 61 °C, which is not accompanied by any major changes in the secondary structure. However, the antigen showed irreversible self-assembly as a function of temperature into higher-order structures with a hydrodynamic diameter of approximately 100 nm. Cryo-transmission electron microscopy analyses demonstrated that these self-assemblies consist of vesicular, ring-like structures with a hollow aqueous interior. Therefore, GBS-NN is a physically stable monomeric protein but is prone to temperature-induced self-assembly above 61 °C.

Formulating Inhalable Dry Powders Using Two-Fluid and Three-Fluid Nozzle Spray Drying.

PURPOSE: The spray drying process is widely applied for pharmaceutical particle engineering. The purpose of this study was to investigate advantages and disadvantages of two-fluid nozzle and three-fluid nozzle spray drying processes to formulate inhalable dry powders. METHODS: Budesonide nanocomposite microparticles (BNMs) were prepared by co-spray drying of budesonide nanocrystals suspended in an aqueous mannitol solution by using a two-fluid nozzle spray drying process. Budesonide-mannitol microparticles (BMMs) were prepared by concomitant spray drying of a budesonide solution and an aqueous mannitol solution using a spray drier equipped with a three-fluid nozzle. The resulting dry powders were characterized by using X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and Raman microscopy. A Next Generation Impactor was used to evaluate the aerodynamic performance of the dry powders. RESULTS: XRPD and DMA results showed that budesonide remained crystalline in the BNMs, whereas budesonide was amorphous in the BMMs. Spray drying of mannitol into microparticles resulted in a crystalline transformation of mannitol, evident from XRPD, DSC and Raman spectroscopy analyses. Both BMMs and BNMs displayed a faster dissolution rate than bulk budesonide. The yield of BNMs was higher than that of BMMs. The mass ratio between budesonide and mannitol was preserved in the BNMs, whereas the mass ratio in the BMMs was higher than the theoretical ratio. CONCLUSIONS: Spray drying is an enabling technique for preparation of budesonide amorphous solid dispersions and nanocrystal-embedded microparticles. Two-fluid nozzle spray drying is superior to three-fluid nozzle spray drying in terms of yield.

Adjuvants Based on Synthetic Mycobacterial Cord Factor Analogues: Biophysical Properties of Neat Glycolipids and Nanoself-Assemblies with DDA.

Synthetic mycobacterial cord factor analogues, e.g., trehalose 6,6'-dibehenate (TDB), are highly promising adjuvants due to their strong immunopotentiating capabilities, but their biophysical properties have remained poorly characterized. Here, we report the synthesis of an array of synthetic TDB analogues varying in acyl chain length, degree of acylation, and headgroup display, which was subjected to biophysical characterization of neat nondispersed self-assembled nanostructures in excess buffer and as aqueous dispersions with cationic dimethyldioctadecylammonium (DDA) bromide. The array comprised trehalose mono- (TMX) and diester (TDX) analogues with symmetrically shortened acyl chains [denoted by X: arachidate (A), stearate (S), palmitate (P), myristate (Myr), and laurate (L)] and an analogue with a short hydrophilic polyethylene glycol (PEG) linker inserted between the trehalose headgroup of TDS and the acyl chains (PEG-TDS). All dispersions were liposomes, but in contrast to the colloidally stable and highly cationic TDX-containing liposomes, the zeta-potential was significantly reduced for DDA/TMX and DDA/PEG-TDS liposomes, suggesting a charge-shielding effect, which compromises the colloidal stability. An increased d-spacing was observed for the lamellar phase of neat TDB analogues in excess buffer (TDS < TMS < PEG-TDS), confirming that the charge shielding is caused by an extended molecular configuration of the more flexible headgroup. Differential scanning calorimetry showed highly cooperative phase transitions for all tested dispersions albeit the monoesters destabilized the lipid bilayers. Langmuir experiments demonstrated that incorporation of TDXs and PEG-TDS stabilized DDA monolayers due to improved hydrogen bonding and reduced intermolecular repulsions. In conclusion, data suggest that the DDA/TDS dispersions exhibit favorable physicochemical properties rendering these DDA/TDS liposomes an attractive vaccine adjuvant, and they emphasize that not only the receptor binding and immune activation but also the biophysical properties of immunopotentiator formulations should be collectively considered when designing adjuvants with optimal safety, efficacy, and storage stability.

Anti-Inflammatory Effect of Anti-TNF-α SiRNA Cationic Phosphorus Dendrimer Nanocomplexes Administered Intranasally in a Murine Acute Lung Injury Model.

Inflammation is an essential component of many lung diseases, including asthma, chronic obstructive pulmonary disease (COPD), or acute lung injury. Our purpose was to design efficient carriers for lung delivery of small interfering RNA (siRNA) targeting tumor necrosis factor (TNF-α) in an acute lung injury model. To achieve this goal, two different types of phosphorus-based dendrimers with either pyrrolidinium or morpholinium as terminal protonated amino groups were selected for their better biocompatibility compared to other dendrimers. Dendriplexes containing pyrrolidinium surface groups demonstrated a stronger siRNA complexation, a higher cellular uptake, and enhanced in vitro silencing efficiency of TNF-α in the lipopolysaccharide (LPS)-activated mouse macrophage cell line RAW264.7, compared to morpholinium-containing dendriplexes. The better performance of the pyrrolidium dendriplexes was attributed to their higher pKa value leading to a stronger siRNA complexation and improved protection against enzymatic degradation resulting in a higher cellular uptake. The superior silencing effect of the pyrrolidinium dendriplexes, compared to noncomplexed siRNA, was confirmed in vivo in an LPS-induced murine model of short-term acute lung injury upon lung delivery via nasal administration. These data suggest that phosphorus dendriplexes have a strong potential in lung delivery of siRNA for treating inflammatory lung diseases.

Systematic Investigation of the Role of Surfactant Composition and Choice of oil: Design of a Nanoemulsion-Based Adjuvant Inducing Concomitant Humoral and CD4+ T-Cell Responses.

PURPOSE: Induction of cell-mediated immune (CMI) responses is crucial for vaccine-mediated protection against difficult vaccine targets, e.g., Chlamydia trachomatis (Ct). Adjuvants are included in subunit vaccines to potentiate immune responses, but many marketed adjuvants stimulate predominantly humoral immune responses. Therefore, there is an unmet medical need for new adjuvants, which potentiate humoral and CMI responses. The purpose was to design an oil-in-water nanoemulsion adjuvant containing a synthetic CMI-inducing mycobacterial monomycoloyl glycerol (MMG) analogue to concomitantly induce humoral and CMI responses. METHODS: The influence of emulsion composition was analyzed using a systematic approach. Three factors were varied: i) saturation of the oil phase, ii) type and saturation of the applied surfactant mixture, and iii) surfactant mixture net charge. RESULTS: The emulsions were colloidally stable with a droplet diameter of 150-250 nm, and the zeta-potential correlated closely with the net charge of the surfactant mixture. Only cationic emulsions containing the unsaturated surfactant mixture induced concomitant humoral and CMI responses upon immunization of mice with a Ct antigen, and the responses were enhanced when squalene was applied as the oil phase. In contrast, emulsions with neutral and net negative zeta-potentials did not induce CMI responses. The saturation degree of the oil phase did not influence the adjuvanticity. CONCLUSION: Cationic, MMG analogue-containing nanoemulsions are potential adjuvants for vaccines against pathogens for which both humoral and CMI responses are needed.

Delivery of siRNA Complexed with Palmitoylated α-Peptide/ß-Peptoid Cell-Penetrating Peptidomimetics: Membrane Interaction and Structural Characterization of a Lipid-Based Nanocarrier System.

Proteolytically stable α-peptide/ß-peptoid peptidomimetics constitute promising cell-penetrating carrier candidates exhibiting superior cellular uptake as compared to commonly used cell-penetrating peptides (CPPs). The aim of the present study was to explore the potential of these peptidomimetics for delivery of small interfering RNA (siRNA) to the cytosol by incorporation of a palmitoylated peptidomimetic construct into a cationic lipid-based nanocarrier system. The optimal construct was selected on the basis of the effect of palmitoylation and the influence of the length of the peptidomimetic on the interaction with model membranes and the cellular uptake. Palmitoylation enhanced the peptidomimetic adsorption to supported lipid bilayers as studied by ellipsometry. However, both palmitoylation and increased peptidomimetic chain length were found to be beneficial in the cellular uptake studies using fluorophore-labeled analogues. Thus, the longer palmitoylated peptidomimetic was chosen for further formulation of siRNA in a dioleoylphosphatidylethanolamine/cholesteryl hemisuccinate (DOPE/CHEMS) nanocarrier system, and the resulting nanoparticles were found to mediate efficient gene silencing in vitro. Cryo-transmission electron microscopy (cryo-TEM) revealed multilamellar, onion-like spherical vesicles, and small-angle X-ray scattering (SAXS) analysis confirmed that the majority of the lipids in the nanocarriers were organized in lamellar structures, yet coexisted with a hexagonal phase, which is important for efficient nanocarrier-mediated endosomal escape of siRNA ensuring cytosolic delivery. The present work is a proof-of-concept for the use of α-peptides/ß-peptoid peptidomimetics in an efficient delivery system that may be more generally exploited for the intracellular delivery of biomacromolecular drugs.

Nano-Self-Assemblies Based on Synthetic Analogues of Mycobacterial Monomycoloyl Glycerol and DDA: Supramolecular Structure and Adjuvant Efficacy.

The mycobacterial cell-wall lipid monomycoloyl glycerol (MMG) is a potent immunostimulator, and cationic liposomes composed of a shorter synthetic analogue (MMG-1) and dimethyldioctadecylammonium (DDA) bromide represent a promising adjuvant that induces strong antigen-specific Th1 and Th17 responses. In the present study, we investigated the supramolecular structure and in vivo adjuvant activity of dispersions based on binary mixtures of DDA and an array of synthetic MMG-1 analogues (MMG-2/3/5/6) displaying longer (MMG-2) or shorter (MMG-3) alkyl chain lengths, or variations in stereochemistry of the polar headgroup (MMG-5) or of the hydrophobic moiety (MMG-6). Synchrotron small-angle X-ray scattering experiments and cryo transmission electron microscopy revealed that DDA:MMG-1/2/5/6 dispersions consisted of unilamellar and multilamellar vesicles (ULVs/MLVs), whereas a coexistence of both ULVs and hexosomes was observed for DDA:MMG-3, depending on the DDA:MMG molar ratio. The studies also showed that ULVs were formed, regardless of the structural characteristics of the neat MMG analogues in excess buffer [lamellar (MMG-1/2/5) or inverse hexagonal (MMG-3/6) phases]. Immunization of mice with a chlamydia antigen surface-adsorbed to DDA:MMG-1/3/6 dispersions revealed that all tested adjuvants were immunoactive and induced strong Th1 and Th17 responses with a potential for a central effector memory profile. The MMG-1 and MMG-6 analogues were equally immunoactive in vivo upon incorporation into DDA liposomes, despite the reported highly different immunostimulatory properties of the neat analogues in vitro, which were attributed to the different nanostructural characteristics. This clearly demonstrates that optimal formulation and delivery of MMG analogues to the immune system is of major importance and challenges the use of in vitro screening assays with nondispersed compounds to identify potential new vaccine adjuvants.

Conserved Molecular Superlattices in a Series of Homologous Synthetic Mycobacterial Cell-Wall Lipids Forming Interdigitated Bilayers.

Synthetic analogues of the cell-wall lipid monomycoloyl glycerol (MMG) are promising as next-generation vaccine adjuvants. In the present study, the thermotropic phase behavior of an array of synthetic MMG analogues was examined by using simultaneous small- and wide-angle X-ray scattering under excess water conditions. The MMG analogues differed in the alkyl chain lengths and in the stereochemistry of the polar glycerol headgroup or of the lipid tails (native-like versus alternative compounds). All MMG analogues formed poorly hydrated lamellar phases at low temperatures and inverse hexagonal (H2) phases at higher temperatures prior to melting. MMG analogues with a native-like lipid acid configuration self-assembled into noninterdigitated bilayers whereas the analogues displaying an alternative lipid acid configuration formed interdigitated bilayers in a subgel (Lc') state. This is in contrast to previously described interdigitated phases for other lipids, which are usually in a gel (Lß) state. All investigated MMG analogues displayed an abrupt direct temperature-induced phase transition from Lc' to H2. This transition is ultimately driven by the lipid chain melting and the accompanying change in molecular shape. No intermediate structures were found, but the entire array of MMG analogues displayed phase coexistence during the lamellar to H2 transition. The structural data also showed that the headgroups of the MMG analogues adopting the alternative lipid acid configuration were ordered and formed a two-dimensional molecular superlattice, which was conserved regardless of the lipid tail length. To our knowledge, the MMG analogues with an alternative lipid acid configuration represent the first example of a lipid system showing both interdigitation and superlattice formation, and as such could serve as an interesting model system for future studies. The MMG analogues are also relevant from a subunit vaccine perspective because they are well-tolerated and display promising immunopotentiating activity. The structural characterization described here will serve as a prerequisite for the rational design of nanoparticulate adjuvants with specific and tailored structural features.

Elucidating the mechanisms of protein antigen adsorption to the CAF/NAF liposomal vaccine adjuvant systems: effect of charge, fluidity and antigen-to-lipid ratio.

The reverse vaccinology approach has recently resulted in the identification of promising protein antigens, which in combination with appropriate adjuvants can stimulate customized, protective immune responses. Although antigen adsorption to adjuvants influences vaccine efficacy and safety, little is generally known about how antigens and adjuvants interact at the molecular level. The aim of this study was to elucidate the mechanisms of interactions between the equally sized, but oppositely charged model protein antigens α-lactalbumin and lysozyme, and i) the clinically tested cationic liposomal adjuvant CAF01 composed of cationic dimethyldioctadecylammonium (DDA) bromide and trehalose-6,6'-dibehenate (TDB) or ii) the neutral adjuvant formulation NAF01, where DDA was replaced with zwitterionic distearoylphosphatidylcholine (DSPC). The effect of liposome charge, bilayer rigidity, isoelectric point and antigen-to-lipid ratio was investigated using dynamic light scattering, transmission electron microscopy, differential scanning calorimetry, intrinsic fluorescence and Langmuir monolayers. The net anionic α-lactalbumin adsorbed onto the cationic liposomes, while there was no measureable attractive interaction with the zwitterionic liposomes. In contrast, the net cationic lysozyme showed very little interaction with either types of liposome. Adsorption of α-lactalbumin altered its tertiary structure, affected lipid membrane packing below and above the phase transition temperature, and neutralized the liposomal surface charge, resulting in reduced colloidal stability and liposome aggregation. Langmuir studies revealed that α-lactalbumin was not squeezed out of DDA monolayers upon compression, which suggests additional hydrophobic interactions. Such interactions are thus likely to affect the way vaccine antigens are presented to antigen-presenting cells, and may play an important role for the efficacy of the vaccine-induced immune response. These studies thus exemplify the importance of characterizing the molecular interactions between the vaccine antigen and adjuvant along with immunogenicity and efficacy studies.

Hyaluronic Acid-Based Nanogels Produced by Microfluidics-Facilitated Self-Assembly Improves the Safety Profile of the Cationic Host Defense Peptide Novicidin.

PURPOSE: Cationic host defence peptides constitute a promising class of therapeutic drug leads with a wide range of therapeutic applications, including anticancer therapy, immunomodulation, and antimicrobial activity. Although potent and efficacious, systemic toxicity and low chemical stability have hampered their commercial development. To overcome these challenges a novel nanogel-based drug delivery system was designed. METHOD: The peptide novicidin was self-assembled with an octenyl succinic anhydride-modified analogue of hyaluronic acid, and this formulation was optimized using a microfluidics-based quality-by-design approach. RESULTS: By applying design-of-experiment it was demonstrated that the encapsulation efficiency of novicidin (15% to 71%) and the zeta potential (-24 to -57 mV) of the nanogels could be tailored by changing the preparation process parameters, with a maximum peptide loading of 36 ± 4%. The nanogels exhibited good colloidal stability under different ionic strength conditions and allowed complete release of the peptide over 14 days. Furthermore, self-assembly of novicidin with hyaluronic acid into nanogels significantly improved the safety profile at least five-fold and six-fold when tested in HUVECs and NIH 3T3 cells, respectively, whilst showing no loss of antimicrobial activity against Escherichia coli and Staphylococcus aureus. CONCLUSION: Formulation in nanogels could be a viable approach to improve the safety profile of host defence peptides.

One-step production of protein-loaded PLGA microparticles via spray drying using 3-fluid nozzle.

PURPOSE: The aim of this study was to investigate the potential of using a spray-dryer equipped with a 3-fluid nozzle to microencapsulate protein drugs into polymeric microparticles. METHODS: Lysozyme and PLGA were used as a model protein and a model polymer, respectively. The effects of process and formulation variables, such as i) the type of organic solvent, ii) the feeding rate ratio of the outer PLGA-containing feed solution to inner lysozyme-containing feed solution, and iii) the mass ratio of PLGA to protein, on the properties (morphology, internal structure, protein surface enrichment and release profiles) of the spray dried microparticles were investigated to understand protein microencapsulation and particle formation mechanisms. RESULTS: The spherical, condensed microparticles were obtained with D50 of 1.07-1.60 µm and Span in the range of 0.82-1.23. The lysozyme surface content decreased upon different organic solvents used as follows: acetonitrile > acetone > dichloromethane. Additionally, the lysozyme surface enrichment decreased slightly when increasing the feeding rate ratio of the outer feed solution to the inner feed solution from 4:1 to 10:1. Furthermore, it was observed that there was a correlation between the degree of burst release and the lysozyme surface enrichment, whereas the lysozyme loading content had no substantial impact on the release kinetics. CONCLUSIONS: The present work demonstrates the potential of spray dryer equipped with a 3-fluid nozzle in microencapsulation of proteins into PLGA matrices with different characteristics by varying process and formulation parameters.

Modulating protein release profiles by incorporating hyaluronic acid into PLGA microparticles Via a spray dryer equipped with a 3-fluid nozzle.

PURPOSE: The purpose of this study was to modulate the release profiles of the model protein drug from spray dried poly(DL-lactic-co-glycolic acid) (PLGA) microparticles by incorporating hyaluronic acid (HA) in the formulation. METHODS: Bovine serum albumin (BSA)-loaded PLGA microparticles with or without HA were prepared using a spray dryer equipped with a 3-fluid nozzle. The effects of HA on the surface tension and the rheological behavior of the inner feed solution were investigated. The physicochemical properties of the resulting microparticles were characterized using scanning electron microscopy (SEM), laser diffraction (LD), confocal laser scanning microscopy (CLSM) and X-ray photoelectron spectroscopy (XPS). Circular dischoism (CD) was used to characterize conformational integrity of BSA released from the microparticles. RESULTS: Spherical microparticles with D50 of 5-10 µm were obtained. Addition of HA in inner feed solutions increased the feed viscosity, but with no influence on the surface tension. All inner feed solutions showed non-Newtonian shear thinning behavior and the rheological properties were not time dependent. The CLSM and XPS analyses suggested a core-shell like structure of the microparticles when HA was incorporated. The release profiles of BSA were extended and the initial burst releases were suppressed with an increase in HA in the microparticle formulations. In addition, HA seemed to protect BSA from degradation upon the spray-drying process. CONCLUSIONS: The present work demonstrates the potential of HA to modulate protein release profile from PLGA microparticle formulations produced via spray drying using 3-fluid nozzle.