RESUMO
The removal of organophosphorus (OP) herbicides from water has been studied using adsorptive removal, chemical oxidation, electrooxidation, enzymatic degradation, and photodegradation. The OP herbicide glyphosate (GP) is one of the most used herbicides worldwide, leading to excess GP in wastewater and soil. GP is commonly broken down in environmental conditions to compounds such as aminomethylphosphonic acid (AMPA) or sarcosine, with AMPA having a longer half-life and similar toxicity to GP. Metal-organic frameworks (MOFs) are excellent materials for purifying OP herbicides from water due to their ability to combine adsorption and photoactivity within one material. Herein, we report the use of a robust Zr-based MOF with a meta-carborane carboxylate ligand (mCB-MOF-2) to examine the adsorption and photodegradation of GP. The maximum adsorption capacity of mCB-MOF-2 for GP was determined to be 11.4 mmol/g. Non-covalent intermolecular forces between the carborane-based ligand and GP within the micropores of mCB-MOF-2 are thought to be responsible for strong binding affinity and capture of GP. After 24 h of irradiation with ultraviolet-visible (UV-vis) light, mCB-MOF-2 selectively converts 69% of GP to sarcosine and orthophosphate, following the C-P lyase enzymatic pathway and biomimetically photodegrading GP. Circumventing the production of AMPA is desirable, as it has a longer half-life and similar toxicity to GP. The exceptional adsorption capacity of GP by mCB-MOF-2 and its biomimetic photodegradation to non-toxic sarcosine make it a promising material for removing OP herbicides from water.
RESUMO
Biofuels are considered sustainable and renewable alternatives to conventional fossil fuels. Biobutanol has recently emerged as an attractive option compared to bioethanol and biodiesel, but a significant challenge in its production lies in the separation stage. The current industrial process for the production of biobutanol includes the ABE (acetone-butanol-ethanol) fermentation process from biomass; the resulting fermentation broth has a butanol concentration of no more than 2 wt% (the rest is essentially water). Therefore, the development of a cost-effective process for separation of butanol from dilute aqueous solutions is highly desirable. The use of porous materials for the adsorptive separation of ABE mixtures is considered a highly promising route, as these materials can potentially have high affinities for alcohols and low affinities for water. To date, zeolites have been tested toward this separation, but their hydrophilic nature makes them highly incompetent for this application. The use of metal-organic frameworks (MOFs) is an apparent solution; however, their low hydrolytic stabilities hinder their implementation in this application. So far, a few nanoporous zeolitic imidazolate frameworks (ZIFs) have shown excellent potential for butanol separation due to their good hydrolytic and thermal stabilities. Herein, we present a novel, porous, and hydrophobic MOF based on copper ions and carborane-carboxylate ligands, mCB-MOF-1, for butanol recovery. mCB-MOF-1 exhibits excellent stability when immersed in organic solvents, water at 90 °C for at least two months, and acidic and basic aqueous solutions. We found that, like ZIF-8, mCB-MOF-1 is non-porous to water (type II isotherm), but it has higher affinity for ethanol, butanol, and acetone compared to ZIF-8, as suggested by the shape of the vapor isotherms at the crucial low-pressure region. This is reflected in the separation of a realistic ABE mixture in which mCB-MOF-1 recovers butanol more efficiently compared to ZIF-8 at 333 K.
RESUMO
Materials that combine flexibility and open metal sites are crucial for myriad applications. In this article, we report a 2D coordination polymer (CP) assembled from CuII ions and a flexible meta-carborane-based linker [Cu2(L1)2(Solv)2]â¢xSolv (1-DMA, 1-DMF, and 1-MeOH; L1: 1,7-di(4-carboxyphenyl)-1,7-dicarba-closo-dodecaborane). 1-DMF undergoes an unusual example of reversible phase transition on solvent treatment (i.e., MeOH and CH2Cl2). Solvent exchange, followed by thermal activation provided a new porous phase that exhibits an estimated Brunauer-Emmett-Teller (BET) surface area of 301 m2 g-1 and is capable of a CO2 uptake of 41 cm3 g-1. The transformation is reversible and 1-DMF is reformed on addition of DMF to the porous phase. We provide evidence for the reversible process being the result of the formation/cleavage of weak but attractive B-HâââCu interactions by a combination of single-crystal (SCXRD), powder (PXRD) X-ray diffraction, Raman spectroscopy, and DFT calculations.
Assuntos
Boranos/química , Polímeros/química , Estruturas Metalorgânicas , PorosidadeRESUMO
The supercritical carbon dioxide (scCO2 ) synthesis of non-reduced graphene oxide (GO) aerogels from dispersions of GO in ethanol is here reported as a low-cost, efficient, and environmentally friendly process. The preparation is carried out under the mild conditions of 333â K and 20â MPa. The high aspect ratio of the used GO sheets (ca.â 30â µm lateral dimensions) allowed the preparation of aerogel monoliths by simultaneous scCO2 gelation and drying. Solid-state characterization results indicate that a thermally-stable mesoporous non-reduced GO aerogel was obtained by using the supercritical procedure, keeping most of the surface oxygenated groups on the GO sheets, thus, facilitating further functionalization. Moreover, the monoliths have a very low density, high specific surface area, and excellent mechanical integrity; characteristics which rival those of most light-weight reduced graphene aerogels reported in the literature.
RESUMO
A new unsymmetric carborane-based dicarboxylic linker provided a 1D Cu2-paddle wheel coordination polymer (2) with much higher hydrolytic stability than the corresponding 2D Cu2-paddle wheel polymer (1), obtained from a related more symmetrical carborane-based linker. Both 1 and 2 were used as efficient heterogeneous catalysts for a model aza-Michael reaction but only 2 can be reused several times without significant degradation in catalytic activity.
RESUMO
This article reports the synthesis of an aerogel involving reduced graphene oxide (rGO) and polyethylenimine (PEI), and describes its potential application as an effective sorbent to treat Hg(II) contaminated water. The rGO/PEI sorbent was synthetized using a supercritical CO2 method. N2 physisorption, electron microscopy, and elemental mapping were applied to visualize the meso/macroporous morphology formed by the supercritical drying. The advantages of the synthetized materials are highlighted with respect to the larger exposed GO surface for the PEI grafting of aerogels vs. cryogels, homogeneous distribution of the nitrogenated amino groups in the former and, finally, high Hg(II) sorption capacities. Sorption tests were performed starting from water solutions involving traces of Hg(II). Even though, the designed sorbent was able to eliminate almost all of the metal from the water phase, attaining in very short periods of time residual Hg(II) values as low as 3.5 µg L-1, which is close to the legal limits of drinking water of 1-2 µg L-1. rGO/PEI exhibited a remarkably high value for the maximum sorption capacity of Hg(II), in the order of 219 mg g-1. All of these factors indicate that the designed rGO/PEI aerogel can be considered as a promising candidate to treat Hg(II) contaminated wastewater.
RESUMO
Post-synthetic modification of a dynamic carborane-based soft porous crystal (1 â DMF) by in situ polymerization of pyrrole to polypyrrole (PPy) provided a permanently porous MOF/polypyrrole hybrid composite material that did not show the dynamic behavior of the mother MOF. Apart from stability, the introduction of conductive PPy in the composite material brings new properties to the otherwise non-conductive MOF.
RESUMO
Carbon nanotubes (CNTs), owing to their high surface area-to-volume ratio and hollow core, can be employed as hosts for adsorbed and/or encapsulated molecules. At high temperatures, the ends of CNTs close spontaneously, which is relevant for several applications, including catalysis, gas storage, and biomedical imaging and therapy. This study highlights the influence of the annealing temperature in the range between 400 and 1100 °C on the structure and morphology of single-walled CNTs. The nitrogen adsorption and density functional theory calculations indicate that the fraction of end-closed CNTs increases with temperature. Raman spectroscopy reveals that the thermal treatment does not alter the tubular structure. Insight is also provided into the efficacy of CNTs filling from the molten phase, depending on the annealing temperature. The CNTs are filled with europium (III) chloride and analyzed by using electron microscopy (scanning electron microscopy and high-resolution transmission electron microscopy) and energy-dispersive X-ray spectroscopy, confirming the presence of filling and closed ends. The filling yield increases with temperature, as determined by thermogravimetric analysis. The obtained results show that the apparent surface area of CNTs, fraction of closed ends, and amount of encapsulated payload can be tailored via annealing.
RESUMO
Poly(methyl methacrylate), PMMA, and of PMMA/Poly(epsilon-caprolactone), PCL, microspheres were loaded with different amounts of cholesterol by using a supercritical carbon dioxide (SC-CO2) impregnation process in order to use a clean technique with the absence of organic solvents, and to provide information for the infusion of additives into nonporous polymeric substrates. A conventional dissolution-evaporation method was also used to obtain PMMA and PMMA-PCL microparticles loaded with cholesterol. The obtained microspheres were characterized by environmental scanning electronic microscope, ESEM, nuclear magnetic resonance spectroscopy, NMR, and differential scanning calorimetry, DSC, thermal analysis. A comparison of drug release from particles obtained using both methods, the supercritical and the conventional, is presented.
Assuntos
Dióxido de Carbono/farmacocinética , Colesterol/química , Sistemas de Liberação de Medicamentos/métodos , Microesferas , Poliésteres/química , Polimetil Metacrilato/química , Varredura Diferencial de Calorimetria/métodos , Dióxido de Carbono/química , Química Farmacêutica/instrumentação , Química Farmacêutica/métodos , Colesterol/farmacocinética , Sistemas de Liberação de Medicamentos/tendências , Estudos de Avaliação como Assunto , Excipientes/química , Excipientes/farmacocinética , Espectroscopia de Ressonância Magnética/métodos , Microscopia Eletrônica de Varredura/métodos , Tamanho da Partícula , Poliésteres/farmacocinética , Polimetil Metacrilato/farmacocinética , Solubilidade , Soluções/química , Soluções/farmacocinética , Espanha , Tecnologia Farmacêutica/instrumentação , Tecnologia Farmacêutica/métodos , Termodinâmica , VolatilizaçãoRESUMO
Nanometric inorganic pigments are widely used as fillers for hybrid composite materials. However, these nanometric powders are hydrophilic in nature and their surface must be functionalized before use. In this work, titanium dioxide (TiO2) nanoparticles were coated using silane coupling agents with alkyl functionality. A supercritical carbon dioxide (scCO2) method was used for surface silanization. Five alkylalkoxysilanes with different alkyl chain length and structure were studied: methyltrimethoxy, isobutyltriethoxy, octyltriethoxy, octyldimethylmethoxy and octadecyltrimethoxysilane. The microstructure and thermal stability of deposited monolayers were characterized using thermogravimetric analysis, ATR-IR spectroscopy, transmission electron microscopy, wettability characterization and low-temperature N2 adsorption/desorption analysis. The use of scCO2 as a solvent provided an effective approach to functionalize individual inorganic nanoparticles due to the enhanced diffusivity of the solution molecules in the aggregates interparticle voids. The trifunctional silanes employed here yielded surfaces with better thermal stabilities and greater hydrophobicities than the used monofunctional silane.