RESUMO
BACKGROUND: Healthcare workers (HCWs) are at a high risk of SARS-CoV-2 infection due to exposure to potentially infectious material, especially during aerosol-generating procedures (AGP). We aimed to investigate risk factors for SARS-CoV-2 infection among HCWs in medical disciplines with AGP. METHODS: A nationwide questionnaire-based study in private practices and hospital settings was conducted between 12/16/2020 and 01/24/2021. Data on SARS-CoV-2 infections among HCWs and potential risk factors of infection were investigated. RESULTS: 2070 healthcare facilities with 25113 employees were included in the study. The overall infection rate among HCWs was 4.7%. Multivariate analysis showed that regions with higher incidence rates had a significantly increased risk of infection. Furthermore, hospital setting and HCWs in gastrointestinal endoscopy (GIE) had more than double the risk of infection (OR 2.63; 95% CI 2.50-2.82, p<0.01 and OR 2.35; 95% CI 2.25-2.50, p<0.01). For medical facilities who treated confirmed SARS-CoV-2 cases, there was a tendency towards higher risk of infection (OR 1.39; 95% CI 1.11-1.63, p=0.068). CONCLUSION: Both factors within and outside medical facilities appear to be associated with an increased risk of infection among HCWs. Therefore, GIE and healthcare delivery setting were related to increased infection rates. Regions with higher SARS-CoV-2 incidence rates were also significantly associated with increased risk of infection.
Assuntos
COVID-19 , Humanos , COVID-19/epidemiologia , SARS-CoV-2 , Aerossóis e Gotículas Respiratórios , Fatores de Risco , Pessoal de SaúdeRESUMO
OBJECTIVES: The FDI criteria for the evaluation of direct and indirect dental restorations were first published in 2007 and updated in 2010. Meanwhile, their scientific use increased steadily, but several questions from users justified some clarification and improvement of the living document. MATERIALS AND METHODS: An expert panel (N = 10) initiated the revision and consensus process that included a kick-off workshop and multiple online meetings by using the Delphi method. During and after each round of discussion, all opinions were collected, and the aggregated summary was presented to the experts aiming to adjust the wording of the criteria as precisely as possible. Finally, the expert panel agreed on the revision. RESULTS: Some categories were redefined, ambiguities were cleared, and the descriptions of all scores were harmonized to cross-link different clinical situations with possible management strategies: reviewing/monitoring (score 1-4), refurbishment/reseal (score 3), repair (score 4), and replacement (score 5). Functional properties (domain F: fracture of material and retention, marginal adaptation, proximal contact, form and contour, occlusion and wear) were now placed at the beginning followed by biological (domain B: caries at restoration margin, hard tissue defects, postoperative hypersensitivity) and aesthetic characteristics (domain A: surface luster and texture, marginal staining, color match). CONCLUSION: The most frequently used eleven categories of the FDI criteria set were revised for better understanding and handling. CLINICAL RELEVANCE: The improved description and structuring of the criteria may help to standardize the evaluation of direct and indirect restorations and may enhance their acceptance by researchers, teachers, and dental practitioners.
Assuntos
Cárie Dentária , Restauração Dentária Permanente , Humanos , Restauração Dentária Permanente/métodos , Resinas Compostas , Odontólogos , Falha de Restauração Dentária , Estética Dentária , Papel Profissional , Adaptação Marginal Dentária , Seguimentos , Propriedades de Superfície , CorRESUMO
OBJECTIVES: The purpose of this in vitro reliability study was to determine the intra- and inter-examiner agreement of the revised FDI criteria including the categories "fracture of material and retention" (F1) and "caries at restoration margin" (B1). MATERIALS AND METHODS: Forty-nine photographs of direct tooth-coloured posterior (n = 25) and anterior (n = 24) restorations with common deficiencies were included. Ten dental experts repeated the assessment in three blinded rounds. Later, the experts re-evaluated together all photographs and agreed on a reference standard. Statistical analysis included the calculation of Cohen's (Cκ), Fleiss' (Fκ), and weighted Kappa (wκ), the development of a logistic regression with a backward elimination model and Bland/Altman plots. RESULTS: Intra- and inter-examiner reliability exhibited mostly moderate to substantial Cκ, Fκ, and wκ values for posterior restorations (e.g. Intra: F1 Cκ = 0.57, wκ = 0.74; B1 Cκ = 0.57, wκ = 0.73/Inter F1 Fκ = 0.32, wκ = 0.53; B1 Fκ = 0.41, wκ = 0.64) and anterior restorations (e.g. Intra F1 Cκ = 0.63, wκ = 0.76; B1 Cκ = 0.48, wκ = 0.68/Inter F1 Fκ = 0.42, wκ = 0.57; B1 Fκ = 0.40, wκ = 0.51). Logistic regression analyses revealed significant differences between the evaluation rounds, examiners, categories, and tooth type. Both the intra- and inter-examiner reliability increased along with the evaluation rounds. The overall agreement was higher for anterior restorations compared to posterior restorations. CONCLUSIONS: The overall reliability of the revised FDI criteria set was found to be moderate to substantial. CLINICAL RELEVANCE: If properly trained, the revised FDI criteria set are a valid tool to evaluate direct and indirect restorations in a standardized way. However, training and calibration are needed to ensure reliable application.
Assuntos
Cárie Dentária , Dente , Humanos , Reprodutibilidade dos Testes , Variações Dependentes do Observador , Restauração Dentária PermanenteRESUMO
The National Competence-Based Catalogue of Learning Objectives in Dentistry (NKLZ) was adopted in 2015 and defines the learning objectives for dental training in Germany. It specifies which competences students should acquire and serves as a basis for the curricular design of the study programme, examinations and teaching materials. The NKLZ promotes a comprehensive education that includes clinical skills and abilities, professional behaviour and communication skills in addition to specialist knowledge. It contributes to the preparation of future dentists for their profession and standardizes training to ensure quality and comparability.This article describes the background, history, structure and further development of the NKLZ. Currently, the NKLZ is being further developed to version 2.0 in a multi-stage process. Its structure is based on the NKLM 2.0, the National Competence-Based Learning Objectives Catalogue for Medicine. The aim is to comprehensively map the requirements for the dental licensing regulations.An important prerequisite for the official recognition of the NKLZ as a basic guideline for the training of dentists is that it be anchored in a dental licensing regulation that is to be reformed soon. This creates clarity and liability for teachers and students. Such an anchoring also enables better coordination between training objectives and the requirements of professional practice. Since the licensing regulations are modified less frequently, the integration of the NKLZ offers the possibility of updating and adapting the catalogue of learning objectives in a structured and regulated manner. This ensures that training is in line with current standards and developments.
Assuntos
Educação Baseada em Competências , Currículo , Humanos , Alemanha , Aprendizagem , Competência Clínica , OdontologiaRESUMO
OBJECTIVES: The aim of this study was to investigate whether file design and taper significantly influence microcrack initiation during machine preparation. MATERIALS AND METHODS: Sixty extracted teeth with straight single canals were selected. The teeth were randomly assigned to four groups based on their root canal anatomy and the corresponding NiTi rotary file system (I, Mtwo; II, ProTaper Universal; III, F6 SkyTaper; control, no preparation and filling). The root canals of the experimental groups were filled using the single-cone technique. The tested teeth were all subjected to a mechanical chewing simulation with flat lead loading over a period of 3 years (corresponding to 150,000 cycles). The teeth were checked for dentinal defects (accumulative crack growth in length) under the digital microscope (Keyence VHX-5000) at time 0 (baseline prior to chewing simulation) and after 3, 6, 12, 24, and 36 months of loading. The cumulative crack increase was statistically analyzed using the Kruskal-Wallis test, Jonckheere-Terpstra test, and the Wilcoxon rank-sum test. The significance was set at p < 0.05. RESULTS: In contrast to preparation with greater-tapered instruments, ProTaper Universal (group II) and F6 SkyTaper (group III) instrumentation with the smaller tapered Mtwo files (group I) showed less accumulative propagation of craze lines (p < 0.05) at all time points. CONCLUSION: Instruments with greater taper for root canal instrumentation should be used with care to avoid negative long-term effects in the form of propagation of dentinal defects over time. A positive cutting-edge angle and a smaller taper have a positive effect on a lower craze line development. CLINICAL RELEVANCE: Instruments with a positive cutting-edge angle and a smaller taper are beneficial for the long-term preservation of dentinal tooth structure.
Assuntos
Mastigação , Preparo de Canal Radicular , Cavidade Pulpar/cirurgia , Dentina , Humanos , Tratamento do Canal Radicular , Raiz DentáriaRESUMO
BACKGROUND: Due to limited aesthetics of stainless-steel crowns, the demand for tooth-coloured crowns has recently risen. Few studies have investigated the marginal integrity and wear behaviour of tooth-coloured primary molar crowns under subcritical load in vitro. AIM: This in vitro study evaluated the marginal quality and wear of newly introduced resin composite and hybrid ceramic crowns compared with metal and zirconia crowns. DESIGN: Metal, resin composite, hybrid ceramic (CAD/CAM), and various zirconia crowns were investigated. After thermomechanical loading (2,500 thermocycles/100,000 × 50N), marginal quality of luting gaps and wear of crowns/antagonists were evaluated using replicas under a light or 3D laser scanning microscope. Results were analysed with the Mann-Whitney U test or one-way ANOVA (p < .05). RESULTS: Marginal quality of the new resin composite and hybrid ceramic crowns performed well in comparison with SSC and zirconia crowns. Adhesive bonding of crowns resulted in superior marginal seal compared with conventional GIC (Mann-Whitney U test, p < .05). Regarding wear, zirconia crowns exhibited significantly worse results than resin composite or hybrid ceramic crowns and SSCs (ANOVA, p < 0.05). CONCLUSION: The new resin composite and hybrid ceramic crown exhibited good performance in comparison with SSCs and zirconia crowns considering both wear and marginal quality after subcritical loading.
Assuntos
Planejamento de Prótese Dentária , Estética Dentária , Cerâmica , Coroas , Humanos , Teste de Materiais , Dente MolarRESUMO
BACKGROUND: The immediate microtensile bond strength (µTBS) of self-etch (SE) adhesives to primary dentine is promising, but evidence about the durability is scarce. AIM: To assess the long-term µTBS of SE adhesives to primary dentine and to examine the effect of 7-s etching on µTBS of a 3-step etch-and-rinse (ER) adhesive. DESIGN: The enamel of 115 caries-free human primary teeth was ground flat, and bonding was performed according to group assignment: G-aenial™ Bond/GC [GB], Clearfil™ SE Bond/Kuraray [CS], OptiBond™ XTR/Kerr [OX], Scotchbond™ Universal/3M™ [SU], Prime&Bond® NT™/Dentsply [PB], and OptiBond™ FL/Kerr [OF]. After storage (24 h, 6 mos., 12 mos.), 1,762 beams were cut for µTBS testing. Fracture analysis was performed using light/fluorescence microscopy. Resin-dentine interfaces were exemplarily analyzed using SEM. RESULTS: After 24 h, OX and SU showed significantly higher estimated mean µTBS than GB, which exhibited the lowest µTBS at all stages (p < .05). µTBS within each adhesive group showed slight variations over time (p > .05). OF_SE produced acceptable µTBS. Etching increased the mean immediate µTBS for OF (p > .05) and the percentage of cohesive fractures. CONCLUSIONS: SE adhesives achieved durable µTBS to primary dentine. 7-s etching may improve the immediate µTBS of a 3-step ER adhesive.
Assuntos
Colagem Dentária , Adesivos Dentinários , Condicionamento Ácido do Dente , Cimentos Dentários , Dentina , Adesivos Dentinários/química , Humanos , Teste de Materiais , Ácidos Fosfóricos , Cimentos de Resina/química , Resistência à Tração , Dente DecíduoRESUMO
AIM: The aim of the present cross-sectional study was to assess and compare the prevalence of MIH among 6-12-year-old school children living either in a rural area of Central Hesse (Germany) or in the city of Frankfurt on the Main (Germany). A possible association between hypomineralised second primary molars (HSPM) and MIH was investigated. Furthermore, the MIH prevalence data of the rural area were compared with those of a previous study conducted in this area in the school year 2002/2003. METHODS: In the school year 2014/2015, 2103 children (6-12 years of age) were examined during the annual school-based dental examinations prescribed by law at nine schools in the rural area of Central Hesse (LDK) and five schools in the city of Frankfurt on the Main (Ffm). Eight previously calibrated dentists working for the public healthcare authorities assessed the prevalence of HSPM/MIH (EAPD criteria/severity scale by Wetzel and Reckel) and the caries experience (dmft/DMFT). RESULTS: The prevalence of HSPM/MIH amounted 3.2%/9.4% in LDK and 2.9%/17.4% in Ffm. In the majority of cases, children with MIH had demarcated opacities. In LDK, hypomineralised first permanent molars were most commonly affected by severity degree 2, whereas in Ffm, severity degree 1 was predominant. Children suffering from HSPM had an odds ratio of 11.32 (95% CI: 6.73-19.03) for having MIH as well. Compared with the results of 2002/2003 in LDK (prevalence of MIH 5.9%), the MIH prevalence increased by 3.5% in the rural area. All in all, the caries experience among children under investigation was low (DMFT 0.14-0.15). SIGNIFICANCE: MIH may be diagnosed in school children living in different areas of Germany with regional variations (rural-urban comparison). The presence of HSPM is of predictive value for MIH. The increasing number of hypomineralised first permanent molars over 12 years of time in the rural area indicates a need for further investigation on the aetiology of MIH.
Assuntos
Hipoplasia do Esmalte Dentário , Incisivo , Criança , Estudos Transversais , Hipoplasia do Esmalte Dentário/epidemiologia , Alemanha/epidemiologia , Humanos , Dente Molar , PrevalênciaRESUMO
PURPOSE: In a combined in vitro/in vivo approach, tunnel vs. box-only resin composite restorations should be evaluated using thermomechanical loading (TML) in vitro and a restrospective clinical trial in vivo. MATERIALS AND METHODS: For the in vitro part, box-only and tunnel cavities were prepared in 32 extracted human third molars under simulated intraoral conditions in a phantom head. Specimens were randomly assigned to four groups (n = 8; 16 box-only/16 tunnel) and received bonded resin composite restorations with Amelogen Plus (box A/tunnel A) or lining with Ultraseal and Amelogen plus (box B/tunnel B) both bonded using PQ1 (all Ultradent). Specimens were subjected to a standardized aging protocol, 1-year water storage (WS) followed by TML (100,000 × 50 N; 2500 × + 5/+ 55 °C). Initially and after aging, marginal qualities were evaluated using replicas at × 200 magnification (SEM). For the corresponding in vivo observational study, 229 patients received 673 proximal resin composite restorations. From 371 tunnel restorations, 205 cavities were filled without flowable lining (tunnel A), and 166 tunnels were restored using UltraSeal as lining (tunnel B). A total of 302 teeth received conventional box-only fillings. Restorations were examined according to modified USPHS criteria during routine recalls up to 5 years of clinical service. RESULTS: In vitro, all initial results showed 100% gap-free margins when a flowable lining was used. Tunnels without lining exhibited some proximal shortcomings already before TML and even more pronounced after TML (p < 0.05). After TML, percentages of gap-free margins dropped to 87-90% in enamel with lining and 70-79% without lining (p < 0.05). In vivo, annual failure rates for box-only were 2.2%, for tunnel A 6.1%, and for tunnel B 1.8%, respectively (p < 0.05). Tunnels had significantly more sufficient proximal contact points than box-only restorations (p < 0.05). Flowable lining was highly beneficial for clinical outcome of tunnel-restorations (p < 0.05). CONCLUSIONS: With a flowable lining, tunnel restorations proved to be a good alternative to box-only resin composite restorations. CLINICAL RELEVANCE: Class II tunnel restorations showed to be a viable alternative for box-only restorations, however, only when flowable resin composite was used as adaptation promotor for areas being difficult to access.
Assuntos
Adaptação Marginal Dentária , Restauração Dentária Permanente , Resinas Compostas , Forramento da Cavidade Dentária , Preparo da Cavidade Dentária , Esmalte Dentário , Adesivos Dentinários , Humanos , Cimentos de ResinaRESUMO
Dental amalgam has been successfully used for the restoration of carious lesions for more than 180 years. It is clinically characterized by high longevity and low technique sensitivity. For decades, dental amalgam has been discussed in the public, especially due to its roughly 50% mercury content. Since the Minamata Convention was published in 2013 with the primary goal of reducing the anthropogenic mercury release into the environment, the previously muted amalgam discussion has received fresh impetus. Another considerable disadvantage of amalgam is its silver/greyish color, which simply no longer matches patients' esthetic demands.The present paper describes the basic problems with amalgam against the background of multiple biological, clinical, and health policy factors. Possible consequences of the Minamata Convention concerning legal regulations as well as the use of dental biomaterials and therefore also relating to the future national healthcare system are discussed. Finally, possible amalgam alternatives and the urgent need for biomedical research towards restorative dentistry are presented, embedded into the crucial question of whether we are actually conducting the correct debate.
Assuntos
Mercúrio , Amálgama Dentário , Alemanha , Política de Saúde , HumanosRESUMO
OBJECTIVES: The aim of the present study was to investigate the influence of five different preparation designs and two different ceramic thicknesses on margin quality and fracture resistance of ceramic laminate veneers after thermomechanical loading in vitro. MATERIALS AND METHODS: Eighty human central incisors were randomly assigned to 10 groups (n = 8) with five different preparation designs: non-prep (NP), minimally invasive (MI) = exclusively enamel-bonded, semi-invasive (SI) = 50% bonded in dentin, invasive (I) = 100% in dentin, and semi-invasive with two additional class III composite resin restorations (SI-C). IPS InLine veneers were fabricated in two thicknesses (L1 = 0.2-0.5 mm; L2 = 0.5-1.2 mm). After adhesive luting (OptiBond FL, Variolink Veneer) with light curing and polishing, specimens were stored in distilled water at 37 °C for 21 days, then thermocycled (2000 cycles between + 5 and + 55 °C), and finally mechanically loaded at the incisal edge at an angle of 45° for 2,000,000 cycles at 50 N und further 1,000,000 cycles at 100 N. Impressions were taken initially, after thermocycling, and after every 250,000 mechanical cycles in order to evaluate cracks and margin quality under a SEM. The veneers were evaluated in a light microscope (× 20) for cracks, chippings, partial, and catastrophic fractures. RESULTS: Margin quality after three million cycles revealed medians for continuous margin of 82-95% without significant differences among groups, neither at the ceramic/composite (p = 0.943) nor at the tooth/composite interface (p = 0.571). Visual inspection of veneers exhibited 22 cracks, 11 chippings, 4 partial and 4 catastrophic fractures in 38 of 80 veneers. The statistical ranking regarding fracture risk (p ≤ 0.05) was: IL1 = SIL1 = MIL1 = IL2 = CL1 = CL2, MIL2 = NPL1 = NPL2 = SIL2, IL2 = CL1 = CL2 = MIL2 = NPL1 = NPL2 = SIL2. CONCLUSIONS: Even after three million cycles with up to 100 N, all groups showed high survival rates. However, the fracture risk increases with thin veneers and preparations with medium to high dentin portions when compared to thicker veneers with preparations in enamel or partially in dentin (p ≤ 0.05). Preexisting resin composite restorations did not show any significant influence on margin quality and facture risk (p > 0.05). CLINICAL RELEVANCE: Ceramic laminate veneers are extremely durable with thin veneers and substantial enamel loss being main risk factors for fracture.
Assuntos
Cerâmica , Resinas Compostas , Esmalte Dentário , Porcelana Dentária , Facetas Dentárias , Humanos , Teste de Materiais , Cimentos de ResinaRESUMO
Using a 445-nm semiconductor laser for tissue incision, an effective cut is expected due to the special absorption properties of blue laser light in soft tissues. The aim of the present study was the histological evaluation of tissue samples after incision with a 445-nm diode laser. Forty soft tissue specimens were obtained from pork oral mucosa and mounted on a motorized linear translation stage. The handpiece of a high-frequency surgery device, a 970-nm semiconductor laser, and a 445-nm semiconductor laser were connected to the slide, allowing a constant linear movement (2 mm/s) and the same distance of the working tip to the soft tissue's surface. Four incisions were made each: (I) 970-nm laser with conditioned fiber tip, contact mode at 3-W cw; (II-III): 445-nm laser with non-conditioned fiber tip, contact mode at 2-W cw, and non-contact mode (1 mm) at 2 W; and (IV): high-frequency surgery device with straight working tip, 90° angulation, contact mode at 50 W. Histological analysis was performed after H&E staining of the embedded specimens at 35-fold magnification. The comparison of the incision depths showed a significant difference depending on the laser wavelength and the selected laser parameters. The highest incision depth was achieved with the 445-nm laser contact mode (median depth 0.61 mm, min 0.26, max 1.17, interquartile range 0.58) (p < 0.05) with the lowest amount of soft tissue denaturation (p < 0.05). The lowest incision depth was measured for the high-frequency surgical device (median depth 0.36 mm, min 0.12, max 1.12, interquartile range 0.23) (p < 0.05). Using a 445-nm semiconductor laser, a higher cutting efficiency can be expected when compared with a 970-nm diode laser and high-frequency surgery. Even the 445-nm laser application in non-contact mode shows clinically acceptable incision depths without signs of extensive soft tissue denaturation.
Assuntos
Lasers Semicondutores , Mucosa Bucal/cirurgia , Animais , Imageamento Tridimensional , Carne Vermelha , SuínosRESUMO
OBJECTIVES: The objective of this study was to investigate the effect of different glass ionomer cements on secondary caries inhibition in a fully automated in vitro biofilm model. MATERIALS AND METHODS: One hundred and twenty-four extracted third molars received class V cavities and were filled with one conventional (Ketac Molar/KM), and two resin-modified glass ionomer cements (Photac Fil/PF, Ketac N100/KN, 3M Espe). A bonded resin composite (Single Bond Plus/Filtek Supreme XTE) served as control. After 14 days water storage at 37 °C, specimens were thermocycled (10,000 × 5/55 °C). Over a period of 10 days, specimens were subjected to cariogenic challenge for 3/4/6 h/day. Demineralization was caused by Streptococcus mutans (DSM 20523) alternatingly being rinsed over specimens using artificial saliva. After biological loading, teeth were cut longitudinally and demineralization depths were evaluated at the margins and at a distance of 0.5 mm from the margins using fluorescence microscopy. Marginal quality was investigated under a SEM at ×200 magnification. RESULTS: Four-hour demineralization depths were for enamel margins (EM), enamel (E), dentin margin (DM), and dentin (D) (µm ± SD): KM: EM 12 ± 8, E 33 ± 7, DM 56 ± 11, D 79 ± 6; PF: EM 19 ± 13, E 34 ± 13, DM 53 ± 10, D 77 ± 12; and KN: EM 26 ± 5, E 38 ± 6, DM 57 ± 11, D 71 ± 7. For all glass ionomer cements (GICs), demineralization depth at the margins was less compared to 0.5 mm distance, with demineralization depth having been correlated to duration of cariogenic challenge (ANOVA [mod. LSD, p < 0.05]). Compared to the bonded resin composite, all GICs exhibited caries inhibition at restoration margins in enamel and dentin. CONCLUSIONS: Fluoride-releasing GIC materials exhibit a secondary caries inhibiting effect in vitro. CLINICAL RELEVANCE: Glass ionomer cements have a higher secondary caries inhibiting effect than resin composites.
Assuntos
Biofilmes , Cárie Dentária/microbiologia , Cárie Dentária/prevenção & controle , Restauração Dentária Permanente/métodos , Cimentos de Ionômeros de Vidro/farmacologia , Bis-Fenol A-Glicidil Metacrilato , Resinas Compostas/química , Cimentos de Ionômeros de Vidro/química , Humanos , Técnicas In Vitro , Microscopia de Fluorescência , Dente Serotino , Resinas SintéticasRESUMO
OBJECTIVES: The objective of this study is to evaluate the effects of treatment modalities on titanium surface characteristics and surrounding tissues. MATERIALS AND METHODS: Eighteen participants each had four titanium healing caps (HC) attached to four newly inserted implants. After healing, each HC was randomly assigned to either (1) titanium curettes (TC), (2) stainless steel ultrasonic tip (PS), (3) erythritol air-polishing powder (EP), or (4) only rubber cup polishing (CON). Probing depths (PD), bleeding on probing (BOP), matrix metalloproteinase 8 (MMP-8), and periopathogens were recorded before and 3 months following instrumentation. After final assessments, HCs were removed, cleaned, and subjected to (a) bacterial colonization (Streptococcus gordonii, 24 h; mixed culture, 24 h) and (b) gingival fibroblasts (5 days). HC surfaces were analyzed with a scanning electron microscope (SEM). RESULTS: No significant differences between the groups were evident before or after instrumentation for PD and BOP (except TC showed a significant decrease in PD; p = 0.049). MMP-8 levels and bacterial loads were always very low. MMP-8 decreased further after instrumentation, while bacteria levels showed no change. No significant differences (p > 0.05) were evident in bacterial colonization or fibroblast attachment. A comparison of the overall mean SEM surface roughness scores showed a significant difference between all groups (p < 0.0001) with the lowest roughness after EP. CONCLUSIONS: All treatments performed yielded comparable outcomes and may be implemented safely. CLINICAL RELEVANCE: Clinicians may fear implant surface damage, but all instrumentation types are safe and non-damaging. They can be implemented as needed upon considering the presence of staining and soft and hard deposits.
Assuntos
Implantação Dentária Endóssea , Implantes Dentários , Profilaxia Dentária/instrumentação , Titânio/farmacologia , Adulto , Idoso , Eritritol/farmacologia , Fibroblastos , Humanos , Metaloproteinase 8 da Matriz/análise , Microscopia Eletrônica de Varredura , Pessoa de Meia-Idade , Mucosite/microbiologia , Mucosite/prevenção & controle , Peri-Implantite/microbiologia , Peri-Implantite/prevenção & controle , Índice Periodontal , Pós/farmacologia , Estudos Prospectivos , Aço Inoxidável/farmacologia , Streptococcus gordonii , Propriedades de Superfície , CicatrizaçãoRESUMO
OBJECTIVES: To evaluate surface characteristics of implants after using different instruments and biofilm formation following instrumentation. MATERIAL AND METHODS: Thirty-five commercially available dental implants were embedded into seven plastic models, attached to a phantom head and randomly assigned to seven instrumentation groups: (1) stainless steel (SSC) or (2) titanium curettes (TC); air-polisher using glycine-based (3) perio (PP) or (4) soft (SP) powders or (5) erythritol powder (EP); and an ultrasonic device using (6) stainless steel (PS) or (7) plastic-coated instruments (PI). Half of each implant neck in each group (n = 5) was treated once (30 s), while the other half was left uninstrumented (control). An eighth (8) treatment group used a bur/polisher to smooth two implants (SM). Following instrumentation implants were rinsed (5 ml Ringer's solution), analysed under a scanning electron microscope (SEM) and subjected twice (separately) to bacterial colonization with Streptococcus gordonii (2 h) and a mixed culture (S. gordonii, Actinomyces naeslundii, Fusobacterium nucleatum, Porphyromonas gingivalis and Tannerella forsythia; 24 h). RESULTS: Visual assessment of SEM pictures revealed surface modifications (smoothening to roughening) following instrumentation. These alterations differed between the instrument groups and from the control. Quantitative scoring of the photographs revealed that SSC caused a significantly rougher surface compared to other instruments (P < 0.05), except for SP (P = 0.057) and PP (P = 0.108). After bacterial colonization no significant differences (P > 0.05) were evident between instrumented or control surfaces in either culture. CONCLUSIONS: Overall, no significant differences were observed in the surface characteristics (except for SSC) or bacterial colonization based on one-time instrumentation.
Assuntos
Biofilmes , Projeto do Implante Dentário-Pivô , Implantes Dentários , Planejamento de Prótese Dentária , Instrumentos Cirúrgicos , Adulto , Idoso , Aumento do Rebordo Alveolar , Estudos de Casos e Controles , Índice de Placa Dentária , Falha de Restauração Dentária , Feminino , Seguimentos , Humanos , Técnicas In Vitro , Masculino , Pessoa de Meia-Idade , Índice Periodontal , Complicações Pós-Operatórias/etiologia , Propriedades de SuperfícieRESUMO
This paper presents European expert consensus guidelines on the management of severe tooth wear. It focuses on the definition of physiological vs pathological tooth wear and recommends diagnosis, prevention, counseling, and monitoring aimed at elucidating the etiology, nature, rate and means of controlling pathological tooth wear. Management decisions are multifactorial, depending principally on the severity and effects of the wear and the wishes of the patient. Restorative intervention is typically best delayed as long as possible. When such intervention is indicated and agreed upon with the patient, a conservative, minimally invasive approach is recommended, complemented by supportive preventive measures. Examples of adhesive, minimum-intervention management protocols are presented.
Assuntos
Desgaste dos Dentes , Humanos , Desgaste dos Dentes/terapiaRESUMO
The International Caries Detection and Assessment System (ICDAS) was introduced for a detailed evaluation of dental caries. The aim of the present study was to compare the ICDAS scores and radiologically evaluated caries depths to the histologically evaluated carious lesions in permanent teeth. 84 freshly extracted human teeth were included. Visual examination and scoring of the occlusal aspect were performed according to the ICDAS II criteria after completing a respective e-learning programme to support training in the use of ICDAS. Bucco-lingual digital X-ray images of the teeth were taken. Specimens were then fixed in formalin and embedded in a photocuring one-component methacrylate-based resin. Longitudinal sections were cut and stained with rhodamine B, fuchsin and acetic light green dye to assess the caries extension by light microscopic analysis. Assessing ICDAS II scores and histological findings, a rank correlation coefficient of r = 0.890 could be found. ICDAS II/radiology and histology/radiology showed correlation coefficients of r = 0.658 and 0.661, respectively. Evaluating receiver operating characteristic (ROC) curves, no exact predictability could be found for caries lesions in enamel for both ICDAS II and radiological evaluation. Focussing on deep dentin lesions, values of 0.940 (ICDAS II) and 0.845 (radiology) showed high predictability with respect to the histologically observed caries extension. The present study indicates an acceptable validity of the ICDAS II criteria when applied to permanent teeth. Especially, dentin lesions can be reliably detected. Thus, ICDAS assessment provides the possibility of reducing X-ray exposure for caries detection.
Assuntos
Cárie Dentária/diagnóstico , Esmalte Dentário/patologia , Exame Físico , Cárie Dentária/diagnóstico por imagem , Esmalte Dentário/diagnóstico por imagem , Dentição Permanente , Humanos , Técnicas In Vitro , Fotografação , Radiografia Dentária Digital , Medição de Risco , Sensibilidade e Especificidade , Coloração e RotulagemRESUMO
It is suggested that pulpal fluid circulation has an impact on pulp temperature increase during heat-generating dental treatment procedures. Thus, the aim of the study was to assess the effect of a simulated pulpal fluid circulation on temperature changes inside the pulp chamber following laser irradiation of the tooth surface. Twenty freshly extracted human multirooted teeth were included and cross-sectioned along the long axis exposing two root canals each. The pulp chamber and root canals were cleaned from remaining soft tissues to achieve access for a temperature sensor and two cannulas to allow fluid circulation. Cross sections were glued together, and the roots were encased with silicone impression material to ensure the position of the connected devices. Each tooth was irradiated by employing a neodymium-doped yttrium orthovanadate (Nd:YVO4) laser at 1,064 nm with a pulse duration of 9 ps and a repetition rate of 500 kHz. A commercially available scanning system (SCANcube 7, SCANLAB) deflected the beam by providing rectangular irradiated areas of 0.5 mm edge length. Measurements were performed with four different settings for fluid circulation: without any water and with water (23 °C) at a flow rate of 6, 3, and 0 ml/min. The primary outcome measure was the maximum temperature difference (ΔT) after laser irradiation. Highest temperature changes (median 3.6 K, range 0.5-7.1 K) could be observed without any fluid inside the pulp chamber. Water without circulation decreased ΔT values statistically significantly (median 1.4 K, range 0.2-4.9 K) (p < 0.05). Lowest temperature changes could be observed with a water flow rate of 6 ml/min (median 0.8 K, range 0.2-3.7 K) (p < 0.05). Pulpal fluid circulation has a cooling effect on temperature increase caused by laser irradiation of dental hard tissues. Studies on heat generation during dental treatment procedures should include this aspect to assess a potential thermal injury of pulp tissue.