RESUMO
We present a method for the formation of an epitaxialâ surface layer involving B, N, and Si atoms on a ZrB2(0001) thin film on Si(111). It has the potential to be an insulating growth template for 2D semiconductors. The chemical reaction of NH3 molecules with the silicene-terminated ZrB2 âsurface was characterized by synchrotron-based, high-resolution core-level photoelectron spectroscopy and low-energy electron diffraction. In particular, the dissociative chemisorption of NH3 at 400 °C leads to surfaceâ nitridation, and subsequent annealing up to 830 °C results in a solid phase reaction with the ZrB2 subsurface layers. In this way, a new nitride-based epitaxialâ surface layer is formed with hexagonal symmetry and a single in-plane crystal orientation.
RESUMO
Since epitaxial silicene is not chemically inert under ambient conditions, its application in devices and the ex-situ characterization outside of ultrahigh vacuum environments require the use of an insulating capping layer. Here, we report on a study of the feasibility of encapsulating epitaxial silicene on ZrB2(0001) thin films grown on Si(111) substrates by aluminum nitride (AlN) deposited using trimethylaluminum (TMA) and ammonia (NH3) precursors. By in-situ high-resolution core-level photoelectron spectroscopy, the chemical modifications of the surface due to subsequent exposure to TMA and NH3 molecules, at temperatures of 300 °C and 400 °C, respectively, have been investigated. While an AlN-related layer can indeed be grown, silicene reacts strongly with both precursor molecules resulting in the formation of Si-C and Si-N bonds such that the use of these precursors does not allow for the protective AlN encapsulation that leaves the electronic properties of silicene intact.
RESUMO
As silicene is not chemically inert, the study and exploitation of its electronic properties outside of ultrahigh vacuum environments require the use of insulating capping layers. In order to understand if aluminum oxide might be a suitable encapsulation material, we used high-resolution synchrotron photoelectron spectroscopy to study the interactions of Al atoms and O2 molecules, as well as the combination of both, with epitaxial silicene on thin ZrB2(0001) films grown on Si(111). The deposition of Al atoms onto silicene, up to the coverage of about 0.4 Al per Si atoms, has little effect on the chemical state of the Si atoms. The silicene-terminated surface is also hardly affected by exposure to O2 gas, up to a dose of 4500 L. In contrast, when Al-covered silicene is exposed to the same dose, a large fraction of the Si atoms becomes oxidized. This is attributed to dissociative chemisorption of O2 molecules by Al atoms at the surface, producing reactive atomic oxygen species that cause the oxidation. It is concluded that aluminum oxide overlayers prepared in this fashion are not suitable for encapsulation since they do not prevent but actually enhance the degradation of silicene.
RESUMO
From the analysis of high-resolution Si 2p photoelectron and near-edge x-ray absorption fine structure (NEXAFS) spectra, we show that core level excitations of epitaxial silicene on ZrB2(0001) thin films are characteristically different from those of sp(3)-hybridized silicon. In particular, it is revealed that the lower Si 2p binding energies and the low onset in the NEXAFS spectra as well as the occurrence of satellite features in the core level spectra are attributed to the screening by low-energy valence electrons and interband transitions between π bands, respectively. The analysis of observed Si 2p intensities related to chemically distinct Si atoms indicates the presence of at least one previously unidentified component. The presence of this component suggests that the observation of stress-related stripe domains in scanning tunnelling microscopy images is intrinsically linked to the relaxation of Si atoms away from energetically unfavourable positions.
RESUMO
The intermolecular band dispersion related to the highest occupied molecular orbital of epitaxial anthracene multilayer films on single-crystalline Bi(0001) has been measured using angle-resolved ultraviolet photoelectron spectroscopy. By comparing the dispersion to that of anthracene multilayers on Cu(110) [F. Bussolotti, Y. Yamada-Takamura, and R. Friedlein, Phys. Rev. B 80, 153402 (2009)], it is shown how the transfer integrals and the difference in on-site energies depend on lattice parameters and how this, in turn, affects the band curvature along high-symmetry directions.
RESUMO
The degree of crystallinity, the structure and orientation of crystallites, and the morphology of thin pentacene films grown by vapor deposition in an ultrahigh vacuum environment on polycrystalline copper substrates have been investigated by x-ray diffraction and tapping-mode scanning force microscopy (TM-SFM). Depending on the substrate temperature during deposition, very different results are obtained: While at 77 K a long-range order is missing, the films become crystalline at elevated temperatures. From a high-resolution x-ray-diffraction profile analysis, the volume-weighted size of the crystallites perpendicular to the film surface could be determined. This size of the crystallites increases strongly upon changing temperature between room temperature and 333 K, at which point the size of individual crystallites typically exceeds 100 nm. In this temperature region, three different polymorphs are identified. The vast majority of crystallites have a fiber texture with the (001) net planes parallel to the substrate. In this geometry, the molecules are oriented standing up on the substrate (end-on arrangement). This alignment is remarkably different from that on single-crystalline metal surfaces, indicating that the growth is not epitaxial. Additionally, TM-SFM images show needlelike structures which suggest the presence of at least one additional orientation of crystallites (flat-on or edge-on). These results indicate that properties of thin crystalline pentacene films prepared on technologically relevant polycrystalline metal substrates for fast electronic applications may be compromised by the simultaneous presence of different local molecular aggregation states at all temperatures.
RESUMO
High-resolution C(1s) near-edge X-ray absorption and X-ray photoionization spectra of the free biphenyl molecule are presented and theoretically analyzed in order to allow an assignment of the observed spectral features. Finite lifetime broadening, a high density of vibrational states, and a strong overlap of contributions from chemically different carbon atom sites only partially allow resolving the vibrational fine structure. However, the shape and width of the spectral profiles are strongly determined by both chemical shifts and vibronic effects. In particular, different from photoionization of valence levels, both types of core level spectra do not contain contributions from dihedral modes which are related to the twisting motion of the two phenyl rings. Contrary to naphthalene, C-H stretching modes are significantly enhanced in the core excitation spectra of biphenyl while the contributions from C-C stretching modes are reduced.
RESUMO
Lithium intercalation compounds of alpha- and beta-perylene are investigated by photoelectron spectroscopy. Spectroscopic data together with a Born-Haber cycle provide information on the formation enthalpy of those materials. This approach allows understanding the amount of charge transferred from the alkali metal atoms to the pi system, and illuminates the role of molecular versus solid-state properties in the formation of the intercalation compounds. In the bulk of alpha-perylene material, molecular dimerization survives upon intercalation which reduces the Madelung energy of the intercalation compound but increases the electron-accepting capability of the organic system and facilitates the ionization of lithium atoms in the molecular solid environment. The lower ionization potential results in a larger charge transfer (about two electrons per molecule) in alpha-perylene compared to the monomeric system, beta-perylene.
RESUMO
High-resolution x-ray photoelectron emission (XPS) and near-edge x-ray absorption fine structure (NEXAFS) spectra of naphthalene are analyzed in terms of the initial state chemical shifts and the vibrational fine structure of the excitations. Carbon atoms located at peripheral sites experience only a small chemical shift and exhibit rather similar charge-vibrational coupling, while the atoms in the bridging positions differ substantially. In the XPS spectra, C-H stretching modes provide important contributions to the overall shape of the spectrum. In contrast, the NEXAFS spectrum contains only vibrational progressions from particular C-C stretching modes. The accuracy of ab initio calculations of absolute electronic transition energies is discussed in the context of minute chemical shifts, the vibrational fine structure, and the state multiplicity.