High-Efficiency Enzyme Assay and Screening of Enzyme-Inhibiting Nanomaterials Using Capillary Electrophoresis with Hierarchically Porous Metal-Organic Framework-Based Immobilized Enzyme Microreactor.

Enzyme-inhibiting nanomaterials have significant potential for regulating enzyme activity. However, a universal and efficient method for systematically screening and evaluating the inhibitory effects of various nanomaterials on drug target enzymes has not been established. While the integrated technique of immobilized enzyme microreactor (IMER) with capillary electrophoresis (CE) serves as an effective tool for enzyme analysis, it still faces challenges such as low enzyme loadability, unsatisfactory stability, and limited applicability. Herein, hierarchical porous metal-organic frameworks (HP-MOFs) were explored as high-performance enzyme immobilization carriers and stationary phases to develop a novel HP-MOFs-based IMER-CE microanalysis system for efficient online enzyme assay and systematic screening of enzyme-inhibiting nanomaterials. As a proof-of-concept demonstration, the model enzyme xanthine oxidase (XOD) was immobilized on a HP-UiO-66-NH2 coated capillary, serving as an efficient and durable IMER for screening potential XOD-inhibiting nanomaterials. The hierarchically micro- and mesoporous structure and superior enzyme loadability of as-prepared HP-UiO-66-NH2-IMER was intensively characterized, followed by systematic evaluation of the separation performance of HP-UiO-66-NH2 coated column and the enzyme kinetics of the immobilized XOD. Compared to the microporous UiO-66-NH2-IMER, the HP-UiO-66-NH2-IMER-CE system showed significant improvements in enzyme loading, maximum reaction rate, repeatability, and long-term stability. Furthermore, the established method was effectively employed to screen the XOD inhibitory activity of various nanomaterials, revealing that graphene oxide, single wall carbon nanotube and three other nanomaterials exhibited inhibitory potentials. The HP-MOFs-based microanalysis system can be easily expanded by modifying the types of immobilized enzymes and holds the potential to accelerate the identification and rational design of effective enzyme-inhibiting nanomaterials.

Sulfonic Functionalized Polydopamine Coatings with pH-Independent Surface Charge for Optimizing Capillary Electrophoretic Separations.

Enhancing the pH-independence and controlling the magnitude of electroosmotic flow (EOF) are critical for highly efficient and reproducible capillary electrophoresis (CE) separations. Herein, we present a novel capillary modification method utilizing sulfonated periodate-induced polydopamine (SPD) coating to achieve pH-independent and highly reproducible cathodic EOF in CE. The SPD-coated capillaries were obtained through post-sulfonation treatment of periodate-induced PDA (PDA-SP) coatings adhered on the capillary inner surface. The successful immobilization of the SPD coating and the substantial grafting of sulfonic acid groups were confirmed by a series of characterization techniques. The excellent capability of PDA-SP@capillary in masking silanol groups and maintaining a highly robust EOF mobility was verified. Additionally, the parameters of sulfonation affecting the EOF mobilities were thoroughly examined. The obtained optimum SPD-coated column offered the anticipated highly pH-independent and high-strength cathodic EOF, which is essential for enhancing the CE separation performance and improving analysis efficiency. Consequently, the developed SPD-coated capillaries enabled successful high-efficiency separation of aromatic acids and nucleosides and rapid cyclodextrin-based chiral analysis of racemic drugs. Moreover, the SPD-coated columns exhibited a long lifetime and demonstrated good intra-day, inter-day, and column-to-column repeatability.

Study of molecular interactions by nonequilibrium capillary electrophoresis of equilibrium mixtures: Originations, developments, and applications.

Molecular interactions play a vital role in regulating various physiological and biochemical processes in vivo. Kinetic capillary electrophoresis (KCE) is an analytical platform that offers significant advantages in studying the thermodynamic and kinetic parameters of molecular interactions. It enables the simultaneous analysis of these parameters within an interaction pattern and facilitates the screening of binding ligands with predetermined kinetic parameters. Nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM) was the first proposed KCE method, and it has found widespread use in studying molecular interactions involving proteins/aptamers, proteins/small molecules, and peptides/small molecules. The successful applications of NECEEM have demonstrated its promising potential for further development and broader application. However, there has been a dearth of recent reviews on NECEEM. To address this gap, our study provides a comprehensive description of NECEEM, encompassing its origins, development, and applications from 2015 to 2022. The primary focus of the applications section is on aptamer selection and screening of small-molecule ligands. Furthermore, we discuss important considerations in NECEEM experimental design, such as buffer suitability, detector selection, and protein adsorption. By offering this thorough review, we aim to contribute to the understanding, advancement, and wider utilization of NECEEM as a valuable tool for studying molecular interactions and facilitating the identification of potential ligands and targets.

Metal-Organic Frameworks-Based Immobilized Enzyme Microreactors Integrated with Capillary Electrochromatography for High-Efficiency Enzyme Assay.

Enzyme assays are important for studying enzyme-mediated biochemical reactions and for clinical diagnosis and drug development. The technique of an immobilized enzyme microreactor (IMER) integrated with capillary electrophoresis (CE) has been frequently utilized in online enzyme assays. However, the traditional approaches for IMER-CE enzyme analysis have some defects such as low loading capacity and poor stability. Herein, metal-organic frameworks (MOFs), which have enormous potential in the fields of enzyme immobilization and capillary electrochromatographic (CEC) separation, were first explored as novel support materials with good enzyme immobilization performance and stationary phases with excellent separation abilities to construct an integrated MOFs-IMER-CEC microanalysis system for a high-efficiency online enzyme assay. As a proof-of-concept demonstration, acetylcholinesterase (AChE) was immobilized on a densely packed UiO-66-NH2 nanocrystal coating on a capillary inner surface with abundant intercrystalline mesoporosity and was employed as a highly effective and robust IMER for CEC-integrated online enzyme analysis. The excellent separation performance of the UiO-66-NH2-modified capillary was verified by high-efficiency separation of three types of neutral, acidic, and basic compounds. The Michaelis-Menten constant and enzyme inhibition kinetics of UiO-66-NH2-IMER were systematically assessed, exhibiting distinct advantages such as remarkably increased enzyme loadability, superior affinity for substrates, and greatly improved stability and repeatability compared to CE-integrated IMERs prepared by the traditional covalent bonding method. Furthermore, the developed method was successfully utilized for detecting organophosphorus pesticides in leguminous vegetable samples, demonstrating its strong practicality. The study not only proposed a novel support material and construction strategy for a high-performance microchannel-based IMER but also can be widely used in bioanalysis and biosensing research.

Homomesoporous Metal-Organic Framework for High-Performance Electrochromatographic Separation.

Metal-organic frameworks (MOFs) have exhibited tremendous potential in the area of separation science. However, most of the developed MOF-based stationary phases contained only microporous structures and suffer from limited separation performance. Herein, homomesoporous MOFs with excellent mass transfer capability and strong thermodynamic interactions are first explored as the novel stationary phase for high-performance capillary electrochromatographic separations. As a proof of concept, noninterpenetrated mesoMOF-1 with uniform mesopore sizes (22.5 × 26.1 Å) and good stability was facilely grown on the inner surface of capillaries and applied as a homomesoporous MOF coating-based stationary phase for high-efficiency electrochromatographic separation. Seven types of analytes with different molecular dimensions were all baseline separated on a mesoMOF-1 coated column with high theoretical plate numbers and excellent repeatability, exhibiting significantly improved separation selectivity and column efficiency in comparison to a microporous HKUST-1 coated column. The maximum column efficiencies of the mesoMOF-1 coated column for substituted benzenes and halobenzenes reached up to 1.4 × 105 plates/m, and its mass loadability was also much higher than that of the HKUST-1 coated column. In addition, based on the analysis of adsorption kinetics and chromatographic retention behaviors, the interaction and retention mechanisms of different molecular-weight analytes on mesoMOF-1 coated stationary phases were systematically explored and disclosed in detail. These results indicate that the homomesoporous MOF-based stationary phase can effectively balance the kinetic diffusion (mass transfer capability) and thermodynamic interactions (the strength of adsorption interaction), having great potential for high-performance chromatographic separation.

Sustainable and Green Synthesis of Waste-Biomass-Derived Carbon Dots for Parallel and Semi-Quantitative Visual Detection of Cr(VI) and Fe3.

Carbon dot (CD)-based multi-mode sensing has drawn much attention owing to its wider application range and higher availability compared with single-mode sensing. Herein, a simple and green methodology to construct a CD-based dual-mode fluorescent sensor from the waste biomass of flowers of wintersweet (FW-CDs) for parallel and semi-quantitative visual detection of Cr(VI) and Fe3+ was firstly reported. The FW-CD fluorescent probe had a high sensitivity to Cr(VI) and Fe3+ with wide ranges of linearity from 0.1 to 60 µM and 0.05 to 100 µM along with low detection limits (LOD) of 0.07 µM and 0.15 µM, respectively. Accordingly, the FW-CD-based dual-mode sensor had an excellent parallel sensing capacity toward Cr(VI) and Fe3+ with high selectivity and strong anti-interference capability by co-using dual-functional integration and dual-masking strategies. The developed parallel sensing platform was successfully applied to Cr(VI) and Fe3+ quantitative detection in real samples with high precision and good recovery. More importantly, a novel FW-CD-based fluorescent hydrogel sensor was fabricated and first applied in the parallel and semi-quantitative visual detection of Cr(VI) and ferrous ions in industrial effluent and iron supplements, further demonstrating the significant advantage of parallel and visual sensing strategies.

Nonlinear behavior in preparative liquid chromatography: A method-development case study for hydroxytyrosol purification.

Preparative liquid chromatography has become an important purification method owing to its advantages of high separation efficiency, good reproducibility, and low solvent consumption. Because overloading in preparative liquid chromatography must be performed to increase the throughput in a cycle, nonlinear chromatographic behavior is observed. Therefore, it is crucial to carefully study nonlinear chromatography for the purification of a given product, which facilitates the efficient optimization of the purification parameters. In this work, a method for the development of a purification method using preparative liquid chromatography based on nonlinear chromatography is proposed. Hydroxytyrosol was selected as the subject for method demonstration. Using methanol and ethanol as organic modifiers, the optimum flow rate was determined on three commercial columns entitled C8 TDE, C18 ME, and C18 TDE, respectively. The curves were fitted with the van Deemter equation, with thorough analysis of the A, B, and C terms. Adsorption isotherms were subsequently studied to explore the distribution of solutes between the stationary and mobile phases at equilibrium. C18 TDE, 5 vol% ethanol-water, and 0.2 mL/min were selected as the optimal separation material, elution solvent, and flow rate, respectively. Purification of hydroxytyrosol was tentatively confirmed on a C18 TDE column with 1.6% sample loading, 90.98% recovery, and 98.01% purity.

Polydopamine-Assisted Rapid One-Step Immobilization of L-Arginine in Capillary as Immobilized Chiral Ligands for Enantioseparation of Dansyl Amino Acids by Chiral Ligand Exchange Capillary Electrochromatography.

Herein, a novel L-arginine (L-Arg)-modified polydopamine (PDA)-coated capillary (PDA/L-Arg@capillary) was firstly fabricated via the basic amino-acid-induced PDA co-deposition strategy and employed to constitute a new chiral ligand exchange capillary electrochromatography (CLE-CEC) method for the high-performance enantioseparation of D,L-amino acids (D,L-AAs) with L-Arg as the immobilized chiral ligand coordinating with the central metal ion Zn(II) as running buffer. Assisted by hydrothermal treatment, the robust immobilization of L-Arg on the capillary inner wall could be facilely achieved within 1 h, prominently improving the synthesis efficiency and simplifying the preparation procedure. The successful preparation of PDA/L-Arg coatings in the capillary was systematically characterized and confirmed using several methods. In comparison with bare and PDA-functionalized capillaries, the enantioseparation capability of the presented CLE-CEC system was significantly enhanced. Eight D,L-AAs were completely separated and three pairs were partially separated under the optimal conditions. The prepared PDA/L-Arg@capillary showed good repeatability and stability. The potential mechanism of the greatly enhanced enantioseparation performance obtained by PDA/L-Arg@capillary was also explored. Moreover, the proposed method was further utilized for studying the enzyme kinetics of L-glutamic dehydrogenase, exhibiting its promising prospects in enzyme assays and other related applications.

Nanoscale Hierarchically Micro- and Mesoporous Metal-Organic Frameworks for High-Resolution and High-Efficiency Capillary Electrochromatographic Separation.

Metal-organic frameworks (MOFs) have been widely applied in a variety of fields. However, most of the developed MOFs are micrometer scale in crystal size and contain only micropores, which will limit the mass transport and diffusion of various analytes into their internal interaction sites, severely restricting the potential of MOFs in separation science. Herein, nanoscale hierarchically porous MOFs (NHP-MOFs) were first explored as a novel MOF-based stationary phase with excellent mass transfer performance and abundant accessible interaction sites for high-performance chromatographic separation. As a proof-of-concept demonstration, the nanoscale hierarchically micro- and mesoporous UiO-66 (NHP-UiO-66) was firmly immobilized on the capillary inner surface and utilized as the porous stationary phase for high-resolution and high-efficiency electrochromatographic separation. A wide range of low-, medium-, and high-molecular-weight analytes, including substituted benzenes, chlorobenzenes, polycyclic aromatic hydrocarbons, nucleosides, polypeptides, and proteins were all separated well on a NHP-UiO-66-coated column with excellent resolution and repeatability, exhibiting significantly improved column efficiency and separation ability compared to those of a microporous UiO-66-modified column. The maximum column efficiencies for all the six kinds of analytes reached up to 1.2 × 105 plates/m, and the relative standard deviations of the migration times of substituted benzenes for intraday, interday, and column-to-column were all lower than 5.8%. These results reveal that NHP-MOFs can effectively combine the advantages of the high specific surface area of microporous MOFs and the excellent mass transfer performance and abundant accessible interaction sites of NHP materials, possessing great prospect for high-performance chromatographic separation.

Preparation and evaluation of a molybdenum disulfide quantum dots embedded C18 mixed-mode chromatographic stationary phase.

Molybdenum disulfide quantum dots (MoS2 QDs) were chosen as a functional two-dimensional material to improve the separation performance of a traditional C18 column. In this work, MoS2 QDs were synthesized by the combination of sonication and solvothermal treatment of bulk MoS2. The prepared MoS2 QDs were characterized by transmission electron microscope (TEM), Zeta potential measurement, UV-visible absorption and fluorescence spectroscopy. Then, a novel MoS2 QDs embedded C18 (Sil-MoS2-C18) stationary phase was prepared for performing mixed-mode liquid chromatography. The results of elemental analysis (EA), thermogravimetric analysis (TGA), Fourier transform infrared spectrometry (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and Brunauer-Emmett-Teller (BET) measurements indicated the stationary phase was prepared successfully. Five types of compounds including alkylbenzenes, polycyclic aromatic hydrocarbons (PAHs), nucleosides and nucleobases, anilines and flavonoids were utilized to evaluate reversed phase, weak cation exchange and hydrophilic interaction of the new column. To a certain extent, the column could achieve separation for different properties of samples on one column, with less organic solvent and shorter time than conventional alkyl and amino columns. Furthermore, the mechanism for separation was studied by investigating effects of mobile phase composition and pH on retentions. In summary, the Sil-MoS2-C18 stationary phase was deemed able to serve the performance of various types of phases, which revealed the prepared mixed-mode column could be potentially applied for the analysis of complex samples. Graphical abstract.

Green synthesis of carbon dots using the flowers of Osmanthus fragrans (Thunb.) Lour. as precursors: application in Fe3+ and ascorbic acid determination and cell imaging.

In this work, dried flowers of Osmanthus fragrans Lour. were applied as green precursors to synthesize carbon dots (CDs) by a green hydrothermal method for the first time. The CDs showed strong blue fluorescence at 410 nm under 340-nm excitation with a quantum yield of approximately 18.53%. Furthermore, the CDs were applied for the sensitive detection of Fe3+. The linear response of Fe3+ ranged from 10 nM to 50 µM with a limit of detection as low as 5 nM. In addition, other ions were used as competitive substances to explore the selectivity of CDs for Fe3+. The fluorescence quenching effect of Fe3+ was much stronger, which demonstrated that the CDs had high selectivity for Fe3+ and they can be employed for the selective detection of Fe3+. The potential fluorescence quenching mechanism between CDs and Fe3+ was identified as the inner filter effect. The CDs were then used as a fluorescent sensor for the detection of Fe3+ in water samples and human serum; the recovery range was 93.76-113.80% (relative standard deviation less than 0.79%). These results indicate that the CDs can be applied for the sensitive and selective detection of Fe3+ in real samples. Moreover, on the basis of the redox reaction between Fe3+ and ascorbic acid (AA), the CD-Fe3+ system can be used as a fluorescent "off-on" sensor for the detection of AA with a limit of detection of 5 µM. What is more, because of their low toxicity and biocompatibility, the CDs can also be used for cell imaging and acted as a fluorescent probe for fluorescence imaging of Fe3+ and AA in living cells. These results demonstrate that the CDs have great potential for application in the fields of sensing, bioimaging, and even disease diagnosis.

Extraction and determination of bioactive flavonoids from Abelmoschus manihot (Linn.) Medicus flowers using deep eutectic solvents coupled with high-performance liquid chromatography.

A highly efficient and ecofriendly extraction method using deep eutectic solvents was developed to extract bioactive flavonoids from Abelmoschus manihot (Linn.) Medicus flowers. First, a series of deep eutectic solvents using choline chloride as hydrogen bond acceptor with different hydrogen bond donors was successfully synthesized. Then, the types of deep eutectic solvents and the extraction conditions for bioactive flavonoids (hyperoside, isoquercitrin, and myricetin) were optimized based on the flavonoids extraction efficiencies. The optimized deep eutectic solvent for hyperoside and isoquercitrin extraction was composed of choline chloride and acetic acid with a molar ratio of 1:2. The optimized deep eutectic solvent for myricetin extraction was composed of one mole of choline chloride and two moles of methacrylic acid. The optimal extraction conditions were set as: solid to solvent ratio, 35:1 (mg/mL); extraction time, 30 min; extraction temperature, 30°C. Qualitative and quantitative analysis were performed using ultra high performance liquid chromatography with tandem mass spectrometry and high-performance liquid chromatography. And the extraction efficiencies of hyperoside, isoquercitrin, and myricetin under optimal extraction conditions were calculated as 11.57, 5.64, and 1.11 mg/g, much higher than those extracted by traditional extraction solvents. Therefore, the prepared deep eutectic solvents can be selected as alternative solvent to extract bioactive flavonoids.

A magnetic and carbon dot based molecularly imprinted composite for fluorometric detection of 2,4,6-trinitrophenol.

A magnetic molecularly imprinted composite was prepared by reverse microemulsion using carbon dots (CDs), Fe3O4 as the co-nucleus, and a molecularly imprinted polymer (MIP; with 2,4,6-trinitrophenol as the template) acting as recognition sites. The composite of type CD/Fe3O4@MIPs was characterized by transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), zeta potentiometric analysis, X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). The results showed that the composite MIP has a spherical shape with average diameter of 200 nm. They also showed that the composite contains core-shell structures with several Fe3O4 nanoparticles and CDs embedded in each of the microsphere. The composite can extract 2,4,6-trinitrophenol (TNP) and has an imprinting factor of 3.6. It has high selectivity and sensitivity for TNP which acts as a quencher of the fluorescence of the CDs (with excitation/emission maxima at 370/470 nm). The limit of detection of this fluorometric TNP assay is 0.5 nM. The method was successfully applied to the determination of TNP in spiked tap water and river water samples, and recoveries ranged from 89.4% to 108.5% (with an RSD of <6%). Graphical abstract Schematic representation of the magnetic molecularly imprinted composite containing fluorescent carbon dots, Fe3O4 and molecularly imprinted polymer (CD/Fe3O4@MIPs). The CD/Fe3O4@MIPs were applied to the selective and sensitive detection of 2,4,6-trinitrophenol (TNP) by fluorometry.

Magnetic covalent organic frameworks with core-shell structure as sorbents for solid phase extraction of fluoroquinolones, and their quantitation by HPLC.

A core-shell structured magnetic covalent organic frameworks of the type Fe3O4@COFs was prepared by using the Fe3O4 nanoparticles as magnetic core, and 4,4"-diamino-p-terphenyl and 1,3,5-tris(p-formylphenyl)benzene as two building blocks. The Fe3O4@COFs were characterized by scanning electron microscopy, transmission electron microscopy, energy dispersive spectrum, Fourier transform infrared spectroscopy, zeta potentiometric analysis, X-ray diffraction, vibrating sample magnetometry, thermogravimetric analysis and the nitrogen adsorption-desorption isotherms. The Fe3O4@COFs have core-shell structure with average diameter of 200 ± 2.4 nm, a high specific surface area (124 m2·g-1), uniform pore size distribution (3.1 nm), good magnetic responsivity (36.8 emu·g-1), good thermal and chemical stability. They were applied as the sorbents for magnetic solid phase extraction (MSPE) for fluoroquinolones (FQs) ciprofloxacin, enrofloxacin, lomefloxacin, gatifloxacin, levofloxacin and pefloxacin. The effects of sorbent dosage, extraction time, p H value, ionic strength, desorption solvent and desorption time were investigated. By combining MSPE with HPLC-DAD analysis, a rapid and sensitive method was developed for the enrichment and determination of these FQs. The method had good linearity in the range of 2.5-1500 ng·g-1 FQ concentration range and low limits of detection (0.25-0.5 ng·g-1). The method was successfully applied to the extraction and determination of FQs in (spiked) pork, milk and human plasma samples. Recoveries ranged from 78.7-103.5% (with RSD<6.2%). Graphical abstract Schematic representation of the magnetic covalent organic frameworks which prepared by using the Fe3O4 nanoparticles as magnetic core, 4,4"-diamino-p-terphenyl and 1,3,5-tris(p-formylphenyl)benzene as two building blocks. The Fe3O4@COFs were applied as adsorbents for magnetic solid phase extraction of six fluoroquinolones (FQs) and HPLC-DAD was applied to analysis the extraction efficiencies.

Molecularly imprinted polymers for the selective extraction of tiliroside from the flowers of Edgeworthia gardneri (wall.) Meisn.

Nano-sized molecularly imprinted polymers for tiliroside were successfully prepared by a precipitation polymerization method. Acrylamide, ethylene glycol dimethacrylate, azobisisobutyronitrile, and acetonitrile/dimethyl sulfoxide were used as functional monomer, cross-linker, initiator, and porogen, respectively. The structural features and morphological characterization of tiliroside-imprinted polymers were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The adsorption experiments indicated that the tiliroside-imprinted polymers exhibited high selective recognition property to tiliroside. Scatchard analysis indicated that the homogeneous-binding sites were formed in the polymers. The selectivity test revealed that the adsorption capacity and selectivity of polymers to tiliroside was significantly higher than that of rutin, astragalin, and kaempferol. Finally, the tiliroside-imprinted polymers were employed as adsorbents in solid-phase extraction for the extraction of tiliroside from the ethyl acetate extract of the flowers of Edgeworthia gardneri (wall.) Meisn. The results demonstrated that the extraction recoveries of tiliroside ranged from 69.3 to 73.5% by using tiliroside-imprinted polymers coupled with solid-phase extraction method. These results indicated that the tiliroside-based molecularly imprinted solid-phase extraction method was proven to be an effective technique for the separation and enrichment of tiliroside from natural medicines.

Enhancement of enantioselectivity in chiral capillary electrophoresis using hydroxypropyl-beta-cyclodextrin as chiral selector under molecular crowding conditions induced by dextran or dextrin.

Molecular crowding is a new approach to enhance the retention properties and selectivity of molecularly imprinted polymers. In this work, this concept was first applied to chiral CE to enhance its enantioselectivity. A model system, enantioseparation of salbutamol using hydroxypropyl-beta-cyclodextrin as chiral selector in the presence of dextran or dextrin as crowding-inducing agents, was chosen to demonstrate its potency. Some parameters, especially the concentration of crowding-inducing agents and cyclodextrins were investigated intensively. Moreover, based on fluorescence spectroscopy and affinity CE, it was found that the presence of crowding-inducing agents could promote the association of enantiomers with cyclodextrins and intensify the interacting differences of two enantiomers with cyclodextrins. As a result, the essential concentration of cyclodextrins to make the enantiomers reach baseline separation was significantly decreased with the aid of molecular crowding. This study shows that molecular crowding is an effective strategy to enhance the enantioselectivity of cyclodextrin in chiral CE.

Zirconium(IV) coordination-mediated rapid and versatile post-modification of polydopamine coating as stationary phase for open-tubular capillary electrochromatography.

In recent years, mussel-inspired polydopamine (PDA)-based materials have attracted significant attention in the field of open-tubular capillary electrochromatography (OT-CEC) owing to their diverse and appealing properties. However, previously established functionalized PDA coating-based CEC stationary phases predominantly relied on the latent reactivity of PDA with amine/thiol-containing molecules, limiting the types of applicable modifiers and requiring time-consuming reaction processes. Herein, we presented a versatile and efficient method for the facile and rapid fabrication of diverse functionalized PDA coatings as OT-CEC stationary phases through a Zr(IV) coordination-mediated post-modification strategy. Different kinds of modifiers, including octadecylamine (ODA), lauric acid (LA), and perfluorooctanoic acid (PFOA), were rapidly and robustly grafted onto the PDA coating, verified through multiple characterization techniques. The influences of preparation parameters on the grafting efficiency of the functionalized PDA coating were systematically investigated. Utilizing the Zr(IV)-mediated ODA-, LA- and PFOA-functionalized PDA-based OT-CEC columns, we achieved high-efficiency baseline separation of a series of neutral analytes with excellent repeatability, good stability, and long lifetime. Given the strong universality of the Zr(IV) coordination-mediated post-modification approach, our study provides an effective pathway for advancing the development of a wider range of functional PDA-based chromatographic stationary phases.

Genome-wide identification of bZIP transcription factors and their expression analysis in Platycodon grandiflorus under abiotic stress.

The Basic Leucine Zipper (bZIP) transcription factors (TFs) family is among of the largest and most diverse gene families found in plant species, and members of the bZIP TFs family perform important functions in plant developmental processes and stress response. To date, bZIP genes in Platycodon grandiflorus have not been characterized. In this work, a number of 47 PgbZIP genes were identified from the genome of P. grandiflorus, divided into 11 subfamilies. The distribution of these PgbZIP genes on the chromosome and gene replication events were analyzed. The motif, gene structure, cis-elements, and collinearity relationships of the PgbZIP genes were simultaneously analyzed. In addition, gene expression pattern analysis identified ten candidate genes involved in the developmental process of different tissue parts of P. grandiflorus. Among them, Four genes (PgbZIP5, PgbZIP21, PgbZIP25 and PgbZIP28) responded to drought and salt stress, which may have potential biological roles in P. grandiflorus development under salt and drought stress. Four hub genes (PgbZIP13, PgbZIP30, PgbZIP32 and PgbZIP45) mined in correlation network analysis, suggesting that these PgbZIP genes may form a regulatory network with other transcription factors to participate in regulating the growth and development of P. grandiflorus. This study provides new insights regarding the understanding of the comprehensive characterization of the PgbZIP TFs for further exploration of the functions of growth and developmental regulation in P. grandiflorus and the mechanisms for coping with abiotic stress response.

[Research progress on the construction and applications of metal-organic frameworks in chromatographic stationary phases].

Metal-organic frameworks (MOFs) are a class of porous crystalline materials composed of metal centers or clusters assembled with organic ligands. These materials possess excellent properties, such as large surface areas, high porosities, uniform pore sizes, and diverse structures. Thus, MOFs have been widely applied in various fields, including catalysis, adsorption, sensing, sample pretreatment, and chromatographic separation. The applications of MOFs as stationary phases for chromatographic separation and analysis have attracted considerable attention from the research community in recent years. Compared with traditional chromatographic stationary phases, such as mesoporous silica, nanoparticles, and porous layers, MOFs possess flexible and tunable pore sizes and structures, thereby enabling precise control over their intermolecular interactions. Furthermore, the wide range of functional ligands and topologies of MOFs could potentially facilitate the separation and analysis of complex samples. These unique advantages render MOFs highly suitable for constructing novel chromatographic stationary phases.This article focuses primarily on the construction methods of MOFs as chromatographic stationary phases, and provides an overview of the latest research advancements in their applications in several chromatographic separation techniques such as high performance liquid chromatography (HPLC), gas chromatography (GC), and capillary electrochromatography (CEC). The existing methods for the preparation and construction of MOFs-based chromatographic stationary phases are classified and evaluated. The construction methods for MOFs as stationary phases for HPLC mainly include filling, precursor-doped polymerization, and post-modification. The construction methods for MOFs as stationary phases for GC predominantly include in situ growth, static coating, and dynamic coating. The stationary phases for CEC can be categorized into packed columns, monolithic columns, and open-tubular columns. Compared with monolithic and packed columns, open-tubular CEC (OT-CEC) offers numerous advantages, including a more flexible and convenient preparation method, enhanced compatibility with various separation media, and higher separation efficiency. Consequently, OT-CEC has emerged as an important method for investigating the preparation of stationary phases for CEC. Several methods such as physical adsorption, covalent attachment, and electrostatic interactions have been developed for the preparation and modification of MOFs-based CEC stationary phases, and extensive studies have been conducted to optimize the performance and applications of MOFs in OT-CEC. However, the existing methods for constructing MOFs-based chromatographic stationary phases present certain limitations. Therefore, the selection of the appropriate MOFs, optimization of their preparation methods, and examination of their performance in different separation modes have become the focus of intensive research.This review also summarizes the different analytical targets (e. g., chiral small molecules, biomacromolecules, and nonchiral molecules) and corresponding separation effects achieved using various MOFs-based chromatographic stationary phases. Finally, future studies focusing on the development of MOFs as chromatographic separation media are discussed. Overall, this review provides a valuable reference for the rational construction and practical applications of advanced MOFs-based chromatographic stationary phases.

Two new diarylheptanoids from the green walnut husks of Juglans mandshurica Maxim.

Chemical investigation on the 95% ethanol extract of green walnut husks of Juglans mandshurica Maxim. led to the isolation of two new diarylheptanoid compounds, including Juglanin K (1) and Myricananin I (2), together with ten known compounds (3-13). Their structures were elucidated by extensive analyses of comprehensive spectroscopic methods. The isolated compounds were evaluated for their antibacterial activities against Escherichia coli and Staphylococcus aureus. The results showed that compound 2 had moderate antibacterial activity with the MIC values of 0.313 and 0.156 mg/mL, respectively. compounds 1, 3-7 and 13 showed weakly antibacterial activities against Escherichia coli and Staphylococcus aureus with the MIC values of 0.625-2.5 mg/mL.