Direct radical functionalization of native sugars.

Naturally occurring (native) sugars and carbohydrates contain numerous hydroxyl groups of similar reactivity1,2. Chemists, therefore, rely typically on laborious, multi-step protecting-group strategies3 to convert these renewable feedstocks into reagents (glycosyl donors) to make glycans. The direct transformation of native sugars to complex saccharides remains a notable challenge. Here we describe a photoinduced approach to achieve site- and stereoselective chemical glycosylation from widely available native sugar building blocks, which through homolytic (one-electron) chemistry bypasses unnecessary hydroxyl group masking and manipulation. This process is reminiscent of nature in its regiocontrolled generation of a transient glycosyl donor, followed by radical-based cross-coupling with electrophiles on activation with light. Through selective anomeric functionalization of mono- and oligosaccharides, this protecting-group-free 'cap and glycosylate' approach offers straightforward access to a wide array of metabolically robust glycosyl compounds. Owing to its biocompatibility, the method was extended to the direct post-translational glycosylation of proteins.

[Rapid Discriminantion of Common Leather Varieties by Near Infrared Spectroscopy].

Rapid classification of leather variety means important to product process control, trading process and market surveillance. There is no official detection standard on classification of leather variety for the present. By now the testers use organoleptic method, burning method, chemical dissolution method, microscope method, or combination of them, to give a convincing result. The testers are required to highly sufficiently experienced, and not influenced by subjective factors. It also costs too much time. For the purpose of this research, spectra of five common varieties of leather samples (full-grain leather, split leather, sheep leather, reborn leather and manmade leather) were collected from market. Discriminant analysis combined with pre-processing method, including multiplicative signal correction (MSC), standard normal variate (SNV), first derivative and second derivative were used to classify the spectra above. It shows that the above five varieties of leather overlapped seriously in the same space. But manmade leather can be easily distinguished from the other four leather varieties using rear spectra, with the misclassified percent of 1.2%. The last four leather varieties covered each other partly in the same space, classify of any two of them can reach a lower misclassified percent, about 1.3%～17.9%. Different pre-processing method affected the discriminantion model positively or negatively with no regularity. None of these pre-processing methods was found to give a positive effect in a stable and persistent way. It can be concluded that it is feasible to discriminate the common leather varieties by near infrared Spectroscopy. All of the samples were taken from the finish products in the market (eg, handbag, belt, leather coat), which were processed in different ways (eg. tanning, knurling, dyeing). The different processes of the samples could bring an unforeseeable influence to the model which may be reduced by some method, for example, increasing the number and variety of samples.

[Application of NIR Spectroscopy for Nondestructive Qualitative and Quantitative Analysis of Lotus Seeds].

By extracting the Near Infrared (NIR) diffuse reflectance spectral characteristics from the post-harvest lotus seeds in different storage periods, the quantitative and qualitative analysis were applied to lotus seeds with the Soluble Solids Content (SSC) and dry matter content (DM) as criteria. The results of the Partial Least Squares Regression (PLSR) and distance discrimination (DA) models showed that the absorption spectra of lotus seeds and lotus kernels has clear relations to their SSC and DM. The PLSR models of SSC and DM of lotus seeds had the best performance in 5 941-12 480 cm(-1) spectral region in this study. Their correlation coefficients of prediction were 0.74 and 0.82, and the correlation coefficients of calibration were 0.82 and 0.84, and the correlation coefficients of leave one out cross validation were 0.72 and 0.71. The PLSR model of SSC of lotus kernels was better in 7 891-9 310 cm(-1) spectral region. Its correlation coefficient of prediction was 0.79, and the correlation coefficient of calibration was 0.84, and the correlation coefficient of leave one out cross validation was 0.77. The PLSR model of DM of lotus kernels is better in the full spectral region. Its correlation coefficient of prediction was 0.92, and the correlation coefficient of calibration was 0.89, and the correlation coefficient of leave one out cross validation was 0.82. For lotus seeds, the DA model in 5 400-7 885 cm(-1) spectral region is the best with a correctness of 84.2%. And for lotus kernels, the DA model in 9 226-12 480 cm(-1) spectral region is the best with a correctness of 90.8%. For dry lotus kernels, the discriminant accuracy of the DA model is 98.9% in the optimal spectral region. All kernels with membrane and plumule were correctly discriminated. This research shows that the NIR spectroscopy technique can be used to determine SSC and DM content of lotus seeds and lotus kernels, as well as to discriminate their freshness and also to discriminate dry lotus kernels of different age and the kernels with membrane and plumule.

[Investigation of light penetration depth and distribution inside citrus tissue].

Experiment was carried out to explore the light intensity change inside citrus samples in the present study. An experimental platform was set up, including a light box, a spectrometer, a sample stage, an optic fiber probe, light sources, etc. The sample stage is adjustable in three dimensions. The optic fiber probe was used to measure the light changes by observing the light attenuation and intensity variation within the citrus tissues. A 632 nm laser source and a 50 W tungsten halogen lamp light source were used. Light intensity and transmittance were investigated at different positions within the citrus fruit. The band with most significant intensity difference was selected to analyze the light intensity and transmittance trends in different positions inside the citrus fruit In order to examine the influence significance of the sample factor on test results, SPSS software was used to do the analysis of variation (ANOVA) of different samples. The results showed that light intensity and transmittance have a positive correlation with puncture depth, while citrus peel and stone have a more obvious attenuation effect than citrus flesh, and the influence of the sample factor on the test results is not significant. Further research can be carried out by improving the experimental device. The method used and results obtained in this study are valuable for studies on light transmission properties inside fruit tissue, not only for citrus but also for other kinds of fruits.

Site-selective S-gem-difluoroallylation of unprotected peptides with 3,3-difluoroallyl sulfonium salts.

Bench-stable 3,3-difluoroallyl sulfonium salts (DFASs), featuring tunable activity and their editable C-ß and gem-difluoroallyl group, proved to be versatile fluoroalkylating reagents for site-selective S-gem-difluoroallylation of cysteine residues in unprotected peptides. The reaction proceeds with high efficiency under mild conditions (ambient temperature and aqueous and weak basic conditions). Various protected/unprotected peptides, especially bioactive peptides, are site-selectively S-gem-difluoroallylated. The newly added gem-difluoroallyl group and other functional groups derived from C-ß of DFASs are poised for ligation with bio-functional groups through click and radical chemistry. This stepwise "doubly orthogonal" modification of peptides enables the construction of bioconjugates with enhanced complexity and functionality. This proof of principle is successfully applied to construct a peptide-saccharide-biotin chimeric bioconjugate, indicating its great potential application in medicinal chemistry and chemical biology.

Late-stage gem-difluoroallylation of phenol in bioactive molecules and peptides with 3,3-difluoroallyl sulfonium salts.

An efficient method for the late-stage selective O-fluoroalkylation of tyrosine residues with a stable yet highly reactive fluoroalkylating reagent, 3,3-difluoroallyl sulfonium salts (DFASs), has been developed. The reaction proceeds in a mild basic aqueous buffer (pH = 11.6) with high efficiency, high biocompatibility, and excellent regio- and chemoselectivity. Various oligopeptides and phenol-containing bioactive molecules, including carbohydrates and nucleosides, could be selectively O-fluoroalkylated. The added vinyl and other functional groups from DFASs can be valuable linkers for successive modification, significantly expanding the chemical space for further bioconjugation. The synthetic utility of this protocol has been demonstrated by the fluorescently labeled anti-cancer drug and the synthesis of O-link type 1,4,7,10-tetraazacyclododecane-N,N',N,N'-tetraacetic acid-tyrosine3-octreotate (DOTA-TATE), showing the prospect of the method in medicinal chemistry and chemical biology.

Stereoretentive Post-Translational Protein Editing.

Chemical post-translational methods allow convergent side-chain editing of proteins without needing to resort to genetic intervention. Current approaches that allow the creation of constitutionally native side chains via C-C bond formation, using off-protein carbon-centered C· radicals added to unnatural amino acid radical acceptor (SOMOphile, singly occupied molecular orbital (SOMO)) "tags" such as dehydroalanine, are benign and wide-ranging. However, they also typically create epimeric mixtures of d/l-residues. Here, we describe a light-mediated desulfurative method that, through the creation and reaction of stereoretained on-proteinl-alanyl Cß· radicals, allows Cß-Hγ, Cß-Oγ, Cß-Seγ, Cß-Bγ, and Cß-Cγ bond formation to flexibly generate site-selectively edited proteins with full retention of native stereochemistry under mild conditions from a natural amino acid precursor. This methodology shows great potential to explore protein side-chain diversity and function and in the construction of useful bioconjugates.

On-site variety discrimination of tomato plant using visible-near infrared reflectance spectroscopy.

The use of visible-near infrared (NIR) spectroscopy was explored as a tool to discriminate two new tomato plant varieties in China (Zheza205 and Zheza207). In this study, 82 top-canopy leaves of Zheza205 and 86 top-canopy leaves of Zheza207 were measured in visible-NIR reflectance mode. Discriminant models were developed using principal component analysis (PCA), discriminant analysis (DA), and discriminant partial least squares (DPLS) regression methods. After outliers detection, the samples were randomly split into two sets, one used as a calibration set (n=82) and the remaining samples as a validation set (n=82). When predicting the variety of the samples in validation set, the classification correctness of the DPLS model after optimizing spectral pretreatment was up to 93%. The DPLS model with raw spectra after multiplicative scatter correction and Savitzky-Golay filter smoothing pretreatments had the best satisfactory calibration and prediction abilities (correlation coefficient of calibration (R(c))=0.920, root mean square errors of calibration=0.196, and root mean square errors of prediction=0.216). The results show that visible-NIR spectroscopy might be a suitable alternative tool to discriminate tomato plant varieties on-site.

Determination of soluble solid content and acidity of loquats based on FT-NIR spectroscopy.

The near infrared (NIR) spectroscopy technique has been applied in many fields because of its advantages of simple preparation, fast response, and non-destructiveness. We investigated the potential of NIR spectroscopy in diffuse reflectance mode for determining the soluble solid content (SSC) and acidity (pH) of intact loquats. Two cultivars of loquats (Dahongpao and Jiajiaozhong) harvested from two orchards (Tangxi and Chun'an, Zhejiang, China) were used for the measurement of NIR spectra between 800 and 2500 nm. A total of 400 loquats (100 samples of each cultivar from each orchard) were used in this study. Relationships between NIR spectra and SSC and acidity of loquats were evaluated using partial least square (PLS) method. Spectra preprocessing options included the first and second derivatives, multiple scatter correction (MSC), and the standard normal variate (SNV). Three separate spectral windows identified as full NIR (800approximately2500 nm), short NIR (800approximately1100 nm), and long NIR (1100approximately2500 nm) were studied in factorial combination with the preprocessing options. The models gave relatively good predictions of the SSC of loquats, with root mean square error of prediction (RMSEP) values of 1.21, 1.00, 0.965, and 1.16 degrees Brix for Tangxi-Dahongpao, Tangxi-Jiajiaozhong, Chun'an-Dahongpao, and Chun'an-Jiajiaozhong, respectively. The acidity prediction was not satisfactory, with the RMSEP of 0.382, 0.194, 0.388, and 0.361 for the above four loquats, respectively. The results indicate that NIR diffuse reflectance spectroscopy can be used to predict the SSC and acidity of loquat fruit.

Controllable catalytic difluorocarbene transfer enables access to diversified fluoroalkylated arenes.

Difluorocarbene has important applications in pharmaceuticals, agrochemicals and materials, but all these applications proceed using just a few types of reaction by taking advantage of its intrinsic electrophilicity. Here, we report a palladium-catalysed strategy that confers the formed palladium difluorocarbene (Pd=CF2) species with both nucleophilicity and electrophilicity by switching the valence state of the palladium centre (Pd(0) and Pd(II), respectively). Controllable catalytic difluorocarbene transfer occurs between readily available arylboronic acids and the difluorocarbene precursor diethyl bromodifluoromethylphosphonate (BrCF2PO(OEt)2). From just this simple fluorine source, difluorocarbene transfer enables access to four types of product: difluoromethylated and tetrafluoroethylated arenes and their corresponding fluoroalkylated ketones. The transfer can also be applied to the modification of pharmaceuticals and agrochemicals as well as the one-pot diversified synthesis of fluorinated compounds. Mechanistic and computational studies consistently reveal that competition between nucleophilic and electrophilic palladium difluorocarbene ([Pd]=CF2) is the key factor controlling the catalytic difluorocarbene transfer.