RESUMO
Several large "shepherd" or livestock guardian dog (LGD) breeds were historically selectively bred to protect sheep and goat flocks in the Balkans, Anatolia, and the Caucasus regions. Although these breeds exhibit similar behavior, their morphology is different. Yet, the fine characterization of the phenotypic differences remains to be analyzed. The aim of this study is to characterize cranial morphology in the specific Balkan and West Asian LGD breeds. We use a 3D geometric morphometric in order to assess morphological differences regarding both shape and size between LGD breeds and compare this phenotypic diversity to close relative wild canids. Our results indicate that Balkan and Anatolian LGDs form a distinct cluster within a relatively large dog cranial size and shape diversity. Most LGDs display a cranial morphology that could be described as intermediate to the mastiff breeds and large herding dogs, except for the Romanian Mioritic shepherd which has a more brachycephalic cranium strongly resembling the bully-type dog cranial morphotype. Although often considered to represent an ancient type of dog, the Balkan-West Asian LGDs are clearly distinguishable from wolves, dingoes, and most other primitive and spitz-type dogs and this group displays a surprising cranial diversity.
Assuntos
Lobos , Cães Trabalhadores , Cães , Animais , Ovinos , Gado , Península Balcânica , Crânio/anatomia & histologia , Lobos/anatomia & histologiaRESUMO
The vast array of dog breeds showcases a remarkable diversity that extends to osteological differences. Exploring these morphological distinctions and establishing reference data for various dog breeds are essential steps in comprehending the evolutionary changes that dogs have undergone. In this study, we conducted linear measurements of the calcaneus and performed shape analyses on selected dog breeds to elucidate distinctive characteristics among them. X-ray images of the calcaneus from six different dog breeds-Maltese Terrier, Toy Poodle, Pomeranian, Cavalier King Charles Spaniel, French Bulldog and Golden Retriever-were utilized for this investigation. Radiological images were obtained from a medio-lateral exposure, positioned 30 cm away from the x-ray device. From these images, four linear length measurements and two angle values were extracted. Additionally, a 2D geometric morphometric analysis was conducted using 32 semi landmarks placed on the radiological images. Linear measurements were assessed using ANOVA, while principal component analysis was employed to examine shape variations across all individuals. Shape differences between species were further elucidated through canonical variates analysis. The results revealed that the Golden Retriever exhibited the highest values for linear measurements, while the Pomeranian showed the lowest. Maltese Terriers displayed the highest dorsal calcaneal angle value. Notably, there were significant differences in calcaneal body length among all breeds, except for the Toy Poodle and Cavalier King Charles Spaniel. Moreover, Maltese Terriers exhibited statistically distinct angular measurements compared to other breeds. Principal component analysis unveiled that the first principal component explained 32.69% of the total variation, with the cranial edge of the calcaneal body being closer to the body in individuals with higher values. Shape variations also indicated that Golden Retrievers displayed a broader range of shapes compared to French Bulldogs, which exhibited a more conservative distribution. While there was no clear breed-specific distinction according to the first principal component, Cavalier King Charles Spaniels generally showed lower values. In canonical variates analysis, distinctions in calcaneal shape between species were apparent, with Golden Retrievers, Cavalier King Charles Spaniels and French Bulldogs displaying positive values for the first canonical variates. The highest Procrustes distance was observed between Maltese Terriers and Cavalier King Charles Spaniels. Notably, allometry was found to be statistically insignificant. This comprehensive study utilized both linear and geometric morphometric analyses based on x-ray images, yielding promising results. The integration of imaging systems in veterinary anatomy research presents numerous opportunities for studying animal welfare and health, utilizing various materials such as bones and cadavers. These advancements hold the potential for further enhancing our understanding of animal morphology and well-being.
Assuntos
Calcâneo , Animais , Cães/anatomia & histologia , Calcâneo/anatomia & histologia , Calcâneo/diagnóstico por imagem , Masculino , Feminino , Análise de Componente Principal , Radiografia/veterinária , Cruzamento , Especificidade da EspécieRESUMO
Septic arthritis is common in newborn calves due to poor birth and housing hygiene. This study investigated the pathological deformities caused by arthritis in the carpal bones of calves using geometric morphometry. The changes in the carpal joint bones of newborn calves with septic arthritis were examined through shape analysis. The study included 20 healthy Simmental calves and 30 Simmental calves with septic arthritis. Dorso-palmar x-ray images of the carpal joint were taken, and geometric morphometry was performed on these images using 25 landmarks. The first principal components (PC1) represented 26.92% of the total variation, while PC2 represented 13.84%. One of the most significant shape changes with increasing PC1 occurred in the os carpi intermedium. The study found that it was statistically possible to discriminate between radiometric carpal joint images of Simmental calves in the control and arthritis groups using geometric morphometry. In newborn calves with septic arthritis, the trochlea radi was located more proximally. There was an enlargement of the os carpi intermedium and a tendency towards the os carpi ulnare in female calves with septic arthritis. These results indicate significant bone deformation due to septic arthritis. Geometric morphometric methods can be clinically useful, as demonstrated in this study. Researchers can statistically explore these shape analyses, opening new avenues for research in this field. This method not only enhances our understanding of morphological changes but also provides a framework for clinical investigations and discoveries in related areas.
Assuntos
Animais Recém-Nascidos , Artrite Infecciosa , Articulações do Carpo , Doenças dos Bovinos , Animais , Artrite Infecciosa/veterinária , Artrite Infecciosa/diagnóstico por imagem , Artrite Infecciosa/patologia , Bovinos , Feminino , Articulações do Carpo/diagnóstico por imagem , Articulações do Carpo/patologia , Masculino , Doenças dos Bovinos/patologia , Doenças dos Bovinos/diagnóstico por imagem , Radiografia/veterinária , Análise de Componente Principal , Ossos do Carpo/diagnóstico por imagem , Ossos do Carpo/patologiaRESUMO
Studies on the structure of the distal phalanx help explain the development of laminitis. Additionally, examining the structure of the distal phalanx from a taxonomic perspective also contributes to veterinary anatomy. In this study, we examined shape variation in the medial and lateral distal phalanx of both fore- and hindlimbs using the geometric morphometry method. We investigated whether the shape of the distal phalanx differed between phalanx positions and how much of the shape variation in this bone depends on size. For this purpose, distal phalanges from 20 Holstein cattle were used, and the bones were digitized in 3D. A draft containing 176 semi-landmarks was prepared for shape analysis, and this draft was applied to all samples using automated landmarking through point cloud alignment and correspondence analysis. A principal component analysis was performed to obtain general patterns of morphological variation. The centroid size (CS) was employed as an approximation of size. Although distal phalanx groups generally showed close variations, PC1 statistically separated the hindlimb lateral distal phalanx (HL) and the forelimb medial distal phalanx (FM) from each other in shape. While PC2 separated HL from other distal phalanx groups, PC3 separated fore- and hindlimb groups. The shape (Procrustes distance) of the hindlimb medial distal phalanx (HM) is markedly less variable than the other three phalanges. The smallest distal phalanx in size was HL. For both forelimb and hindlimb, the medial distal phalanges were larger than the lateral ones. Size (CS) was found to have an effect on PC1 and PC3. In this study, a reference model of the same breeds for distal phalanx was created. These results can provide useful information, especially in terms of veterinary anatomy, zooarchaeology, and paleontology.
RESUMO
There are different strains of laboratory mouse used in many different fields. These strains differ anatomically. In order to determine these anatomical differences, shape analysis was conducted according to species. CD-1, C57bl/6 and Balb-c strains were preferred to study these differences. Forty-eight adult mouse strains belonging to these strains were utilized. The bones were photographed and geometric morphometry was applied to these photographs. Principal Component Analysis was applied to determine shape variations. In Principal component 1 for cranium, CD-1 and C57bl/6 strain groups showed different shape variations, while Balb-c strain group showed similar shape variations to the other strain groups. Principal Component 1 for the mandible separated the CD-1 and C57bl/6 strain groups in terms of shape variation. Principal Component 2 explained most of the variation between the C57bl/6 and CD-1 lineage groups. In PC1 for molars, the CD-1 group showed a different shape variation from the other groups. Mahalanobis distances and Procrustes distances were measured using Canonical variance analysis to explain the differences between the lineage groups. These measurements were statistically significant. For cranium, in canonical variate 1, CD-1 group of mouse and Balb-c group of mouse were separated from each other. In canonical variate 2, C57bl/6 group of mouse were separated from the other groups. For mandible, Balb-c group of mouse in canonical variate 1 and CD-1 group of mouse in canonical variate 2 were separated from the other groups. For molars, CD-1 group of mouse in canonical variate 1 and Balb-c group of mouse in canonical variate 2 were separated from the other groups. It was thought that these anatomical differences could be caused by genotypic factors as well as dietary differences and many different habits that would affect the way their muscles work.
Assuntos
Mandíbula , Camundongos Endogâmicos BALB C , Camundongos Endogâmicos C57BL , Crânio , Animais , Crânio/anatomia & histologia , Camundongos/anatomia & histologia , Mandíbula/anatomia & histologia , Camundongos Endogâmicos BALB C/anatomia & histologia , Camundongos Endogâmicos C57BL/anatomia & histologia , Dente/anatomia & histologia , Análise de Componente Principal , Especificidade da Espécie , MasculinoRESUMO
Dogs are animals with strong bite force. This strong bite mechanism has led to significant changes in the skeletal system such as fossa masseterica. It can be thought that one side is used more than the other side in chewing and is related to the preference of using the same side's hand, eye and foot. In the study, directional asymmetry and fluctuating asymmetry, which occurs as a result of chewing asymmetry, were examined on the first molar teeth and the fossa masseterica in 85 dog mandibles including a wide diversity of morphotypes. The association of high PC1 values for directional asymmetry with a pronounced cranial index, as evident in breeds like Pekingese, Pomeranian and Bulldog, indicates a potential evolutionary or selective breeding trend favouring brachycephaly. On the contrary, guardian breeds like the German shepherd and Bernese mountain dog, which typically require strong jaws for their roles, showcased reduced PC1 values, which might be related to their functional morphology. Similarly, the PCA results for the first molar teeth shape variations also highlighted the influence of cranial shape, with boxer dogs displaying notably higher PC1 values. The fluctuating asymmetrical distributions provided valuable insights into individualistic variations. Interestingly, no specific breed distribution trend was observed for these asymmetries, indicating a more individual-based variation rather than breed-based. It is essential to note that while these results provide valuable insights, further studies are required to understand the underlying causes better. Factors like genetic variations, developmental processes, dietary habits and external environmental factors could play pivotal roles in these observed morphological differences.
Assuntos
Mastigação , Dente Molar , Animais , Cães/anatomia & histologia , Cães/fisiologia , Dente Molar/anatomia & histologia , Dente Molar/fisiologia , Mastigação/fisiologia , Masculino , Feminino , Mandíbula/anatomia & histologia , Força de MordidaRESUMO
The neurocranium in birds provides valuable insights into their morphological diversity, including adaptations related to brain size, facial shaping, and environmental factors. This study analyzes the neurocranial shape characteristics and size of chickens with similar genetic backgrounds. By examining the neurocranial shape variation in chickens of the same age and sex, the study aims to understand the factors contributing to morphological diversity within this specific group. 3D geometric morphometrics was used to analyze 235 neurocrania from four chicken breeds. The analysis revealed significant differences in centroid size among the chicken breeds. The largest neurocranium centroid size was found in Sasso chickens., which were statistically separated from Atak-S. Additionally, centroid size effectively differentiates between Lohmann Brown and Lohmann Sandy chicken breeds. The most significant shape variation concerned the width of the rostral part of the frontal bone. However, according to the PC1 value, the shape variation was observed within rather than between groups. Lohmann Sandy chickens exhibited higher variability in neurocranial shape, suggesting greater shape diversity within this breed than others. As for shape analysis, the breeds showed closer similarity to each other. Lohmann Sandy chickens are characterized by positive PC1 value, with the rostral end of the frontal region inclined more ventrally, and a more extensive basioccipital region. Sasso chickens have a more dome-shaped middle part of the frontal region than other breeds. The study also identified the most significant shape variation among the study samples, observed at the rostral part of the frontal bone. These findings contribute to understanding the genetic and environmental influences shaping neurocranial morphology in chickens. Similar studies in different bird species and subspecies offer valuable insights into avian biology and adaptation.
Assuntos
Galinhas , Crânio , Animais , Galinhas/anatomia & histologia , Galinhas/genética , Galinhas/classificação , Galinhas/fisiologia , Crânio/anatomia & histologia , Feminino , MasculinoRESUMO
This study aimed to reveal the morphological characteristics of pure Holstein and Simmental skulls and to obtain reference values for morphometric analysis. Moreover, 54 skulls from 12- to 14-month-old male Holstein (n = 25) and Simmental (n = 29) cattle were collected from Turkey's Southeastern Anatolia Region between 2023 and 2024. Linear measurements indicated that Holsteins had longer skulls compared to Simmentals. Holsteins exhibited significantly higher values for the greatest length of nasals and the shortest skull length. The facial breadth was wider in Holsteins and statistically distinctive between the breeds. Holsteins had a more oval orbital bony roof, while Simmentals exhibited a wider orbital structure. The orbital index was higher in Holsteins, distinguishing between the two breeds. It was observed that Simmental cattle had a wider occipital region. This difference is likely due to the larger lateral appearance of the Simmental skull, which has more body weight and provides a larger surface area for muscle attachment. These differences not only aid in breed identification but also offer insights into the functional adaptations of each breed. Future research should explore the genetic and environmental factors contributing to these morphological traits, further enriching our knowledge of cattle morphology and its implications for breeding and conservation efforts.
RESUMO
This research utilizes geometric morphometrics to investigate shape variation in the skull, mandible, and teeth among three rat strains: Wistar Albino (WA), Sprague Dawley (SD), and WAG/Rij (WR). Through the analysis of 48 rats using 2D geometric morphometric techniques, significant differences in their skull morphology were identified. This study indicates a shift from a rectangular to an oval cranial shape across strains, with notable size and morphological variances. Particularly, the WR strain's skull shape significantly differs from the SD and WA strains, suggesting distinct ecological or genetic pathways. Compared to the skull, mandible shape differences are less pronounced, but still significant. The WR strain exhibits a distinct mandible shape, potentially reflecting ecological adaptations like dietary habits. The teeth shape of WR rats is the most distinct. SD rats consistently exhibited larger sizes in both skull and mandible measurements, while WR rats were notably smaller. Interestingly, sexual dimorphism was not statistically significant in skull and teeth sizes, aligning with findings from previous studies. However, the mandible showed clear size differences between sexes, underscoring its potential for adaptive or behavioral studies. In summary, this study provides a comprehensive analysis of morphological variations in rat strains, highlighting the intricate interplay of size, shape, and ecological factors. These findings lay a foundation for deeper explorations into the adaptive, ecological, or genetic narratives influencing rat morphology.
RESUMO
Fossa masseterica, to which the musculus masseter is attached, is the pit on the lateral surface of the ramus mandibulae. Processus coronoideus is a protrusion on the upper part of fossa masseterica. Carnivores have a more developed fossa masseterica and a wider processus coronoideus than other species, due to their well-developed jaw muscles. However, there is limited information about the differences of these two structures among carnivorous species. In this study, it was investigated whether fossa masseterica and processus coronoideus differ in shape in domestic cats and domestic dogs. For this purpose, 22 dogs and 20 cats were examined by 3D geometric morphometry. Eighty-one landmarks were used on the fossa masseterica and processus coronoideus. The difference in centroid sizes and shape for cats and dogs was statistically significant (p < 0.0001). PC1 explained 26.47% of the total variance. It was seen that cats and dogs were completely separated according to PC1 results. In cats with a high PC1 value, the processus coronoideus was narrower than in dogs. Also, feline processus coronoideus was more curved than domestic canine processus coronoideus. In addition, the caudal inclination of processus coronoideus was deeper in dogs than in cats. Dogs had a negative PC1 value except for one sample (German Shepherd). The sample with the lowest PC1 value was the French Bulldog (female, 7 years, and 13 kg). Discriminant analysis results showed that the domestic cats and domestic dogs used in the study were completely separated from each other, and this difference was statistically significant. The results of this study showed that dogs with stronger jaw muscles had a deeper fossa masseterica and a wider processus coronoideus than cats.
Assuntos
Doenças do Gato , Doenças do Cão , Animais , Cães , Gatos , Feminino , MandíbulaRESUMO
The most significant bone used in taxonomic research is the skull. This study attempted to identify differences between the three cat species by measuring the skulls of each using computed tomography sections. The study used a total of 32 cat skulls, including 16 Van Cats, eight British Shorthairs and eight Scottish Folds. Van Cat had the highest values for cranial and skull length, whereas British Shorthair had the lowest values. The difference between the British Shorthair and Scottish Fold skull length and cranial length measures was not statistically significant. However, the Van Cat skull length result was statistically different from other species (p < 0.05). Scottish Fold had the broadest head (cranial width: 41.02 ± 0.79 mm). These results demonstrated that the scull of the Van Cat was longer but thinner than that of other species. In comparison to other species, the form of the Scottish Fold skull was more rounded. Internal height of cranium measurements for Van Cat and British Shorthair were statistically significant. In Van Cats, this measurement was 27.81 ± 1.58 mm, while in British Shorthairs, it was 30.23 ± 1.89 mm. Measurements of the foremen magnum were not statistically significant for any species. Van Cat's measures for the foramen magnum were the highest (Foramen magnum height: 11.59 ± 0.93 mm; Foramen magnum width: 14.18 ± 0.70 mm). Scottish Fold had the highest cranial index (Cranial index: 55.50 ± 4.02). Van Cat had the lowest value for this (Cranial index: 50.19 ± 2.16). Van Cat's cranial index value differed statistically from that of other species (p < 0.05). Between species, the foramen magnum index was not significant. None of the index values were statistically significant for Scottish Fold and British Shorthair. Foramen magnum width had the highest age-to-measurement value correlation (r = 0.310), although it was statistically insignificant. Skull length had the highest weight-to-measurement value correlations (R = 0.809), and it proved to be statistically significant. Skull length was the measuring value that distinguished male and female the most clearly (p = 0.000).
Assuntos
Forame Magno , Crânio , Masculino , Feminino , Animais , Crânio/diagnóstico por imagem , Cabeça , Tomografia Computadorizada por Raios X/veterinária , EscóciaRESUMO
The use of carnivores as experimental models in auditory biology has led to a significant improvement regarding our understanding of the structure and function of the ear. Considering that data regarding the anatomy of the middle ear in the red fox are rare, this study aimed to describe the morphological and morphometrical features of the auditory ossicles in the red fox, as well as to provide their shape characteristics by geometric analysis. Nine adult red foxes were used in the study. The malleus, incus and stapes were extracted from the middle ear, prepared, photographed and measured using the software. For the geometric analysis, 19 landmarks were used. Following Principal Component Analysis (PCA), PC1 was found to explain approximately half of all variance (incus: 49.97%; malleus: 49.93%; stapes: 58.49%). The study demonstrated the similar anatomical organization of the auditory ossicles in line with important morphometric and basic geometric data, which can contribute to this field and add a useful perspective to the literature.
RESUMO
The foramen magnum is a large round or oval opening surrounded by parts of the occipital bone. It connects the cranial cavity with the vertebral canal. The foramen magnum is an important structure having various applications in veterinary practice and forensic medicine. The variability of its shape and sexual dimorphism allow it to be exploited for sex and age identification in different species. This retrospective study used computed tomographic (CT) images of the caudal region of the 102 mixed-breed cat heads (55 males and 47 females). Eight linear measurements of the foramen magnum (FM) and occipital condyles were performed on CT images. The aim of the study was to find out if the linear measurements of the CT images of the foramen magnum showed variability between the sexes of the cats. In general, the values of the linear measurements in male cats were higher than in females. The mean maximum length of the foramen magnum (MLFM) was 11.18 ± 0.84 mm and 10.63 ± 0.72 mm in male and female cats, respectively. The mean maximum internal width of the foramen magnum (MWFM) was 14.43 ± 0.72 mm in males and 13.75 ± 1.01 mm in females. The difference between FM measurements in female and male cats was statistically significant (p value; FML: 0.001, FMW: 0.000). The MLFM confidence interval was 10.41 mm to 10.86 mm in female cats and 10.97 mm to 11.39 mm in males. The confidence interval of MWFM was 13.5 mm to 14.0 mm in female cats and 14.2 mm to 14.66 mm in male cats. With these intervals, we can predict the probability of sex in cats with 95% confidence. It was noted that measurements of the occipital condyles were not sex-determining. The difference in foramen magnum index in female and male cats was statistically insignificant (p value; 0.875). As a result of the study, it was seen that the linear measurements of the foramen magnum were sex-determining.
Assuntos
Forame Magno , Caracteres Sexuais , Masculino , Gatos , Feminino , Animais , Forame Magno/diagnóstico por imagem , Estudos Retrospectivos , Crânio/diagnóstico por imagem , Tomografia Computadorizada por Raios X/veterináriaRESUMO
A variety of skull shapes are frequently used for discrimination between animal species, breeds, and sexes. In this study, skulls of three different breeds of cats were examined by the geometric morphometric method, with the aim of revealing skull shape differences. For this purpose, 27 cats (6 British Shorthair, 7 Scottish Fold, and 14 Van cats) were used. The skulls of cats were modeled by computed tomography. Geometric morphometrics was applied using dorsal (8 landmarks, 63 semilandmarks) and lateral (8 landmarks, 63 semilandmarks) skull projections on these models. Centroid size differences between the breeds were statistically insignificant. However, the differences in shape were statistically significant for both the dorsal view and lateral view. Shape variation was less in the British Shorthair than in other breeds. Shape differences generally occurred around the orbit. In the skull of Scottish Folds, the orbit was situated more caudally than in other breeds. The British Shorthair had the largest orbital ring. In dorsal view, the Scottish Fold had the largest orbital diameter. The orbital ring of Van cats was smallest in both dorsal and lateral views. In the canonical variate analysis, it was seen that the breeds were separated from each other. The shape difference in the skull between different cat breeds could be revealed by geometric morphometrics. The results of this study provide useful information for taxonomy.
RESUMO
The Balkan Peninsula region has a very diverse agricultural and livestock tradition, and almost every country has its own local breed of sheep. Different breeds of sheep and different breeding traditions, despite the small geographical distance, determine the morphological and morphometric variability among animal breeds. In this study, this morphological diversity among the skulls of sheep breeds of some countries in the Balkan region was examined by the geometric morphometric method. 2D images of 86 sheep skulls from five different countries were analyzed from the dorsal view.Sixteen landmarks were used. The Bardhoka and the Ivesi breed have the broadest distributions of skull shape amongst the sheep breeds. The Ruda sheep is the most morphologically conservative. The sheep from Turkey (Ivesi) and Kosovo (Bardhoka) seem to differ mainly from sheep from other Balkan countries. Bardhoka and Ruda differ most from each other (p < 0.0001). The next biggest differences were between Ivesi and Ruda (p < 0.0011) and between Bardhoka and Sharri sheep (p < 0.0016). The sheep breeds Dubska and Lara e Polisit differ the least from each other. Geometrics morphometric analysis is a useful tool to detect differences in the shape of the skull of different sheep breeds and can therefore be used successfully for taxonomic purposes.
Assuntos
Variação Genética , Crânio , Ovinos , Animais , Península Balcânica , Cabeça , TurquiaRESUMO
In this study, the geometric morphometry of the pelvis of 32 (16 male, 16 female) crossbreed cats was investigated. Pelvis images of cats were obtained by computerized tomography method. Then, these images were modelled and geometric morphometry was applied. Shape variations of the pelvis of all individuals were obtained by principal component analysis. The first principal component (PC1) value explained 18.44% of the total variation. Second principal component (PC2) and third principal component (PC3) values explained 16.84% and 13.60% of the total variation, respectively. The difference in the shape of the pelvis of female and male cats was more pronounced in PC2 and PC3, which differed in the linea terminalis. The centroid size difference in terms of sex in the Procrustes ANOVA result is statistically insignificant (p > 0.05). However, the shape difference was statistically significant (p < 0.001). As a result of discriminant analysis, the pelvis of female and male cats was completely separated from each other. The crista iliaca of males was more lateral than females. Linea terminalis was wider in shape in females. The edge of the acetabulum was higher in shape in males. Regression analysis was performed to see whether the age and weight of the cats had an effect on the centroid size of the cats. Age and weight were not found to be effective on centroid size. The shape variations of the anatomical formations obtained by geometric morphometry method can be revealed, and it can be examined whether there is a shape difference between the groups.
Assuntos
Ílio , Pelve , Masculino , Feminino , Animais , Pelve/diagnóstico por imagem , Análise DiscriminanteRESUMO
The study investigated whether there is a morphological difference between the shape of the female and male quail's skulls. For this purpose, 18 female and 21 male quails were used. After the skulls were obtained, their photographs were taken, and geometric analysis was performed. Dorsal (14 landmarks), caudal (8 landmarks), and ventral (13 landmarks) images of skulls were evaluated. As a result of the Principal Component Analysis (PCA), 28 principal components (PCs) were obtained for dorsal view, 16 PCs for caudal view, and 26 PCs for ventral view. PC1 (41.206%) for the caudal aspect explained the highest shape variation in terms of sex. It was seen that PC1 for dorsal view explained 33.046% and PC1 for ventral view explained 34.495% shape variation. For the dorsal view, the orbital pit of males was found to be deeper than females. The foramen magnum was narrower in female skulls. The lateral borders of the neurocranium were more pointed upwards in males. On ventral view, it was seen that male individuals had a wider skull in shape. Geometrically, it was determined that the male and female distinction was the best in the dorsal view. According to the dorsal view, only one male individual was found to be in the female group, and all other male individuals were completely separated from the females. After the dorsal view, the best distinction was seen ventrally. In the caudal examination, sexual discrimination was not fully seen. In this study, shape differences in quail's skulls were examined between sexes, and shape differences were revealed geometrically. In addition to traditional morphometry studies, it is thought that geometric analysis studies will add a useful perspective to the literature.
RESUMO
This study aimed to explain the sex determination of the autochthonous dog Deltari Ilir with both morphometric and geometric analysis methods. For this purpose, 24 Deltari Ilir dog skulls (12 females and 12 males) were used in the study. The difference between males and females at 6 values was statistically significant. The most statistically significant difference was seen in the measurement of the greatest breadth of the occipital condyles (p < 0.000). This measurement was higher in male skulls. The next most significant difference was seen in the greatest inner height of the orbit measurement (p < 0.002). This measurement was also higher than for females. In general, the skull length measurements of male dogs were higher than that of females. Male dog skulls had greater skull length and skull height. The lateral view was used for geometric analysis and 14 landmarks were determined. As a result of principal component analysis, 22 PC values were obtained. PC1 accounted for 23.73% of the total variance. As a result of canonical variants analysis, it was observed that males and females were completely separated from each other. The caudal part of the males was wider than the females in geometric analysis. As a result of the study, sex-determining characteristics were revealed for the Deltari Ilir dog. It was seen that gender analysis could be done with both morphometric and geometric analysis methods. In addition, it was seen that morphometric results and geometric analysis results supported each other. Moreover, the results of the study will be useful in the function of comparative anatomy, in veterinary clinical practice, in zooarchaeology but why not also in the veterinary forensic investigation.
Assuntos
Lobos , Animais , Cães , Feminino , Cabeça , Kosovo , Masculino , Órbita , Caracteres Sexuais , Crânio/anatomia & histologiaRESUMO
BACKGROUND: Yellow-legged gulls (Larus michahellis), commonly found in Istanbul and their surroundings, have a monomorphic plumage, like other gull species. For this reason, sex determination cannot be made externally. In this study, a total of 60 adult Yellow-legged gulls, 33 males, and 27 females, collected from the coastal areas of Istanbul, were examined. Discriminating functions were developed to classify males and females using birds that were previously sexed by DNA analysis and abdominal dissection. RESULTS: Head length and bill depth were selected to build the discriminant function by the stepwise analysis. The function classified male gulls with an accuracy of 97.0% and females with an accuracy of 92.6%. Head length alone is the most accurate predictor in terms of the percentage of correct sex determination (90.9% for males, 92.6% for females). CONCLUSIONS: Functions that can easily determine sexual dimorphism for the population of Larus michahellis gulls around Istanbul have been put forward for the first time.
RESUMO
This study aims to determine the differences in skull between Asian and golden palm civets by geometric morphometric method. The landmarks were marked on these photographs, and principal component, classical cluster and canonical variance analyses were performed. The method of geometric morphometry of the skull is a powerful tool used to differentiate the species. Fourteen and 20 homologous landmarks were marked using tpsutil and tpsdig2 programs on the frontal and palatinal directional photographs, respectively. As a result of the study, the first principal component (PC1) accounted for 33.586% on the frontal view, 41.602% on the palatinal view of the total shape differences, respectively. Distinctive differences on the frontal and palatinal view were observed in the caudal, rostrolateral and the last molars and the caudal palatine, respectively.