Newly fabricated magnetic lanthanide oxides core-shell nanoparticles in phosphoproteomics.

Metal oxides show high selectivity and sensitivity toward mass spectrometry based enrichment strategies. Phosphopeptides/phosphoproteins enrichment from biological samples is cumbersome because of their low abundance. Phosphopeptides are of interest in enzymes and phosphorylation pathways which lead to the clinical links of a disease. Magnetic core-shell lanthanide oxide nanoparticles (Fe3O4@SiO2-La2O3 and Fe3O4@SiO2-Sm2O3) are fabricated, characterized by SEM, FTIR, and EDX and employed in the enrichment of phosphopeptides. The nanoparticles enrich phosphopeptides from casein variants, nonfat milk, egg yolk, human serum and HeLa cell extract. The materials and enrichment protocols are designed in a way that there are almost no nonspecific bindings. The selectivity is achieved up to 1:8500 using ß-casein/BSA mixture and sensitivity down to 1 atto-mole. Batch-to-batch reproducibility is high with the reuse of core-shell nanoparticles up to four cycles. The enrichment followed by MALDI-MS analyses is carried out for the identification of phosphopeptides from serum digest and HeLa cell extract. Characteristic phosphopeptides of phosphoproteins are identified from human serum after the enrichment, which have the diagnostic potential toward prostate cancer. Thus, the lanthanide based magnetic core-shell materials offer a highly selective and sensitive workflow in phosphoproteomics.

Development of erbium phosphate doped poly(glycidyl methacrylate/ethylene dimethacrylate) spin columns for selective enrichment of phosphopeptides.

In this study, a novel method for the highly selective enrichment of phosphopeptides using erbium phosphate doped poly(glycidyl methacrylate/ethylene dimethacrylate) spin columns is presented. Erbium phosphate was synthesized by precipitation from boiling phosphoric acid and incubated overnight in erbium chloride solutions. The resulting powder was embedded in a monolithic poly(glycidyl methacrylate/ethylene dimethacrylate) polymer. The monolith was synthesized in a spin column by radical polymerization. Erbium phosphate demonstrated a high affinity and selectivity for phosphopeptides due to the strong interaction of trivalent erbium ions with the phosphate groups of phosphopeptides. The high selectivity and performance of the designed spin columns were demonstrated by successfully enriching phosphopeptides from tryptically digested protein mixtures containing the model phosphoproteins α- and ß-casein, bovine milk, and human saliva. By the implementation of several washing steps, unspecific components were removed and the enriched phosphopeptides were effectively eluted from the spin columns under alkaline conditions. The selective performance of the presented method was further demonstrated by the enrichment of two synthetic phosphopeptides, which were spiked in tryptically digested and dephosphorylated HeLa cell lysates at low ratios. Finally, the presented approach was compared to conventional phosphopeptide enrichment by titanium oxide and revealed higher recoveries for the erbium phosphate doped monoliths.

Solid-phase extraction of plant thionins employing aluminum silicate based extraction columns.

Thionins belong to a family of cysteine-rich, low-molecular-weight (∼5 KDa) biologically active proteins in the plant kingdom. They display a broad cellular toxicity against a wide range of organisms and eukaryotic cell lines. Thionins protect plants against different pathogens, including bacteria and fungi. A highly selective solid-phase extraction method for plant thionins is reported deploying aluminum silicate (3:2 mullite) powder as a sorbent in extraction columns. Mullite was shown to considerably improve selectivity compared to a previously described zirconium silicate embedded poly(styrene-co-divinylbenzene) monolithic polymer. Due to the presence of aluminum(III), mullite offers electrostatic interactions for the selective isolation of cysteine-rich proteins. In comparison to zirconium(IV) silicate, aluminum(III) silicate showed reduced interactions towards proteins which resulted into superior washings of unspecific compounds while still retaining cysteine-rich thionins. In the presented study, European mistletoe, wheat and barley samples were subjected to solid-phase extraction analysis for isolation of viscotoxins, purothionins and hordothionins, respectively. Matrix-assisted laser desorption/ionization time of flight mass spectroscopy was used for determining the selectivity of the sorbent toward thionins. The selectively retained thionins were quantified by colorimetric detection using the bicinchoninic acid assay. For peptide mass-fingerprint analysis tryptic digests of eluates were examined.

Highly selective recovery of phosphopeptides using trypsin-assisted digestion of precipitated lanthanide-phosphoprotein complexes.

The basic idea of this study was to recover phosphopeptides after trypsin-assisted digestion of precipitated phosphoproteins using trivalent lanthanide ions. In the first step, phosphoproteins were extracted from the protein solution by precipitation with La(3+) and Ce(3+) ions, forming stable pellets. Additionally, the precipitated lanthanide-phosphoprotein complexes were suspended and directly digested on-pellet using trypsin. Non-phosphorylated peptides were released into the supernatants by enzymatic cleavage and phosphopeptides remained bound on the precipitated pellet. Further washing steps improved the removal of non-phosphorylated peptides. For the recovery of phosphopeptides the precipitated pellets were dissolved in 3.7% hydrochloric acid. The performance of this method was evaluated by several experiments using MALDI-TOF MS measurements and delivered the highest selectivity for phosphopeptides. This can be explained by the overwhelming preference of lanthanides for binding to oxygen-containing anions such as phosphates. The developed enrichment method was evaluated with several types of biological samples, including fresh milk and egg white. The uniqueness and the main advantages of the presented approach are the enrichment on the protein-level and the recovery of phosphopeptides on the peptide-level. This allows much easier handling, as the number of molecules on the peptide level is unavoidably higher, by complicating every enrichment strategy.

A new type of metal chelate affinity chromatography using trivalent lanthanide ions for phosphopeptide enrichment.

In this study, a new type of immobilized metal-ion affinity chromatography (IMAC) resin for the isolation of phosphopeptides was synthesized which is based on the specific interaction between phosphate groups and chelated lanthanide metal ions. In this regard trivalent lanthanum, holmium and erbium ions were chelated to a highly porous phosphonate polymer which was prepared by radical polymerization of vinylphosphonic acid (VPA) and divinylbenzene (DVB). The developed method was evaluated with peptide mixtures from digested standard proteins (α-casein, ß-casein and ovalbumin) as well as with bovine milk, egg white and a spiked HeLa cell lysate. Compared to the commonly used TiO2 approach, the presented method showed higher selectivity for phosphorylated peptides. This can be explained by the strong preference of trivalent lanthanide ions for phosphates with which they form very tight ionic bonds. Mono- and multiply phosphorylated peptides could be enriched and released in a single basic elution step, while non-phosphorylated peptides remained on the resin. Ab initio quantum mechanical energy minimizations of model complexes for polymer-ion-ligand interactions provided geometries, binding energies and charges which are discussed in conjunction with the observed experimental properties, leading to the most satisfying agreement. The presented lanthanide-IMAC resins represent promising affinity materials for the selective isolation of phosphopeptides from biological samples.

Solid-phase extraction method for the isolation of plant thionins from European mistletoe, wheat and barley using zirconium silicate embedded in poly(styrene-co-divinylbenzene) hollow-monoliths.

Thionins are cysteine-rich, biologically active small (∼5 kDa) and basic proteins occurring ubiquitously in the plant kingdom. This study describes an efficient solid-phase extraction (SPE) method for the selective isolation of these pharmacologically active proteins. Hollow-monolithic extraction tips based on poly(styrene-co-divinylbenzene) with embedded zirconium silicate nano-powder were designed, which showed an excellent selectivity for sulphur-rich proteins owing to strong co-ordination between zirconium and the sulphur atoms from the thiol-group of cysteine. The sorbent provides a combination of strong hydrophobic and electrostatic interactions which may help in targeted separation of certain classes of proteins in a complex mixture based upon the binding strength of different proteins. European mistletoe, wheat and barley samples were used for selective isolation of viscotoxins, purothionins and hordothionins, respectively. The enriched fractions were subjected to analysis by matrix-assisted laser desorption/ionisation-time-of-flight mass spectrometer to prove the selectivity of the SPE method towards thionins. For peptide mass-fingerprint analysis, tryptic digests of SPE eluates were examined. Reversed-phase high-performance liquid chromatography hyphenated to diode-array detection was employed for the purification of individual isoforms. The developed method was found to be highly specific for the isolation and purification of thionins.

Highly efficient precipitation of phosphoproteins using trivalent europium, terbium, and erbium ions.

This study describes a highly efficient method for the selective precipitation of phosphoproteins by trivalent europium, terbium, and erbium metal ions. These metal cations belong to the group of lanthanides and are known to be hard acceptors with an overwhelming preference for oxygen-containing anions such as phosphates to which they form very tight ionic bonds. The method could be successfully applied to specifically precipitate phosphoproteins from complex samples including milk and egg white by forming solid metal-protein complexes. Owing to the low solubility product of the investigated lanthanide salts, the produced metal-protein complexes showed high stability. The protein pellets were extensively washed to remove nonphosphorylated proteins and contaminants. For the analysis of proteins the pellets were first dissolved in 30 % formic acid and subjected to matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) MS. For peptide mass-fingerprint analysis the precipitated phosphoproteins were enzymatically digested using microwave-assisted digestion. The method was found to be highly specific for the isolation and purification of phosphoproteins. Protein quantification was performed by colorimetric detection of total precipitated phosphoproteins and revealed more than 95 % protein recovery for each lanthanide salt.

A novel strategy for phosphopeptide enrichment using lanthanide phosphate co-precipitation.

Reversible phosphorylation of proteins is a common theme in the regulation of important cellular functions such as growth, metabolism, and differentiation. The comprehensive understanding of biological processes requires the characterization of protein phosphorylation at the molecular level. Although, the number of cellular phosphoproteins is relatively high, the phosphorylated residues themselves are generally of low abundance due to the sub-stoichiometric nature. However, low abundance of phosphopeptides and low degree of phosphorylation typically necessitates isolation and concentration of phosphopeptides prior to mass spectrometric analysis. In this study, we used trivalent lanthanide ions (LaCl(3), CeCl(3), EuCl(3), TbCl(3), HoCl(3), ErCl(3), and TmCl(3)) for phosphopeptide enrichment and cleaning-up. Due to their low solubility product, lanthanide ions form stable complexes with the phosphate groups of phosphopeptides and precipitate out of solution. In a further step, non-phosphorylated compounds can easily be removed by simple centrifugation and washing before mass spectrometric analysis using Matrix-assisted laser desorption/ionisation-time of flight. The precipitation method was applied for the isolation of phosphopeptides from standard proteins such as ovalbumin, α-casein, and ß-casein. High enrichment of phosphopeptides could also be achieved for real samples such as fresh milk and egg white. The technology presented here represents an excellent and highly selective tool for phosphopeptide recovery; it is easily applicable and shows several advantages as compared with standard approaches such as TiO(2) or IMAC.

Zirconium silicate assisted removal of residual proteins after organic solvent deproteinization of human plasma, enhancing the stability of the LC-ESI-MS response for the bioanalysis of small molecules.

An efficient blood plasma clean-up method was developed, where methanol protein precipitation was applied, followed by zirconium silicate assisted exclusion of residual proteins. A strong binding of zirconium (IV) silicate to the proteins enabled the elimination of remaining proteins after solvent deproteinization through a rapid solid-phase extraction (SPE) procedure. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI/TOF MS) was used for monitoring the proteins during clean-up practice applied to human plasma samples. The proteins were quantified by colorimetric detection using the bicinchoninic acid (BCA) assay. The presented analytical strategy resulted in the depletion of >99.6% proteins from human plasma samples. Furthermore, high-performance liquid chromatography hyphenated to diode-array and electrospray ionization mass spectrometric detection (HPLC-DAD/ESI MS) was applied for qualitative and quantitative analysis of the caffeoylquinic acids (CQAs) and their metabolites in human plasma. The procedure demonstrated high recoveries for the standard compounds spiked at different concentrations. Cynarin and chlorogenic acid were recovered in the range of 81-86% and 78-83%, respectively. Caffeic acid was extracted in the excess of 89-92%, while ferulic acid and dihydroxyhydrocinnamic acid showed a recovery of 87-91% and 92-95%, respectively. The method was partially validated in accordance with FDA-Industry Guidelines for Bioanalytical Method Validation (2001). The presented scheme improves the clean-up efficacy of the methanol deproteinization, significantly reduces the matrix effects and provides a great analytical tool for the isolation of small molecules from human plasma.

Solid-phase extraction of galloyl- and caffeoylquinic acids from natural sources (Galphimia glauca and Arnicae flos) using pure zirconium silicate and bismuth citrate powders as sorbents inside micro spin columns.

Galloyl- and caffeoylquinic acids are among the most important pharmacological active groups of natural compounds. This study describes a pre-step in isolation of some selected representatives of these groups from biological samples. A selective solid-phase extraction (SPE) method for these compounds may help assign classes and isomer designations within complex mixtures. Pure zirconium silicate and bismuth citrate powders (325 mesh) were employed as two new sorbents for optimized SPE of phenolic acids. These sorbents possess electrostatic interaction sites which accounts for additional interactions for carbon acid moieties as compared to hydrophilic and hydrophobic sorbents alone. Based on this principle, a selective SPE method for 1,3,4,5-tetragalloylquinic acid (an anti-HIV and anti-asthamatic agent) as a starting compound was developed and then deployed upon other phenolic acids with success. The recoveries and selectivities of both sorbents were compared to most commonly applied and commercially available sorbents by using high performance liquid chromatography. The nature of interaction between the carrier sorbent and the acidic target molecules was investigated by studying hydrophilic (silica), hydrophobic (C18), mixed-mode (ionic and hydrophobic: Oasis(®) MAX) and predominantly electrostatic (zirconium silicate) materials. The newly developed zirconium silicate and bismuth citrate stationary phases revealed promising results for the selective extraction of galloyl- and caffeoylquinic acids from natural sources. It was observed that zirconium silicate exhibited maximum recovery and selectivity for tetragalloylquinic acid (84%), chlorogenic acid (82%) and dicaffeoylquinic acid (94%) among all the tested sorbents.