RESUMO
The formulation of magnetic ionic liquids (MILs) or organic salts based on lanthanides as anions has been explored. In this work, a set of choline-family-based salts, and two other, different cation families, were combined with Gadolinium(III) and Terbium(III) anions. Synthetic methodologies were previously optimized, and all organic salts were obtained as solids with melting temperatures higher than 100 °C. The magnetic moments obtained for the Gd(III) salts were, as expected, smaller than those obtained for the Tb(III)-based compounds. The values for Gd(III) and Tb(III) magnetic salts are in the range of 6.55-7.30 MB and 8.22-9.34 MB, respectively. It is important to note a correlation between the magnetic moments obtained for lanthanides, and the structural features of the cation. The cytotoxicity of lanthanide-based salts was also evaluated using 3T3, 293T, Caco2, and HepG2 cells, and it was revealed that most of the prepared compounds are not toxic.
Assuntos
Elementos da Série dos Lantanídeos , Humanos , Elementos da Série dos Lantanídeos/farmacologia , Elementos da Série dos Lantanídeos/química , Sais , Células CACO-2 , Ânions , CátionsRESUMO
A structurally constrained derivative of 4',7-dihydroxyflavylium was studied in aqueous solution and in CTAB micelles by pH jumps, flash photolysis and continuous irradiation with spectroscopic details assessed as well by theoretical calculations. In water, up to pH = 8, the compound shows only acid base chemistry with deprotonation of the flavylium cation to form a quinoidal base that further deprotonates with pKas of 4.8 and 7.4. In the basic region, unprotonated trans-chalcones are formed. No neutral trans-chalcone (Ct) is formed in water preventing the establishment of the well-known photochromism involving photoisomerization of this species with subsequent formation of the flavylium cation. Addition of 0.02 M CTAB drastically changes the mole fraction distribution of species, leading to the formation of Ct (χCt = 1 at pH = 5) and unveiling a photochromic behavior with a pH-tunable colour contrast in a large pH range (2 < pH < 8). The Ct species can be hidden again (irreversibly) upon addition of α-cyclodextrin that disrupts the CTAB micelles, reverting the system to its initial mole fraction distribution of species. These supramolecular inputs work atop the molecular reaction networks by modifying their species' mole fraction distribution.
RESUMO
The effect of methyl, hydroxyl, and chloride substituents in position 3 of the 3',4',7-trihydroxyflavylium core structure was studied. The stability, relative energy of each of chemical species (thermodynamics), and their rates of interconversion (kinetics) are very dependent on these substituents. By comparing the mole fraction distribution at equilibrium of the three multistate systems with the parent 3',4',7-trihydroxyflavylium, introduction of a methyl substituent in position 3 increases the mole fraction of hemiketal at the expense of the trans-chalcone and increases the hydration rate very significantly; a hydroxyl substituent in position 3 gives rise to a degradation process, as observed in anthocyanidins. In the case of 3-chloro-3',4',7-trihydroxyflavylium, a dramatic increase of the flavylium cation acidity was observed and a photochromic system can be operated upon irradiation of the respective trans-chalcone in 1 m HCl. According to the photochromic response of 3,3',4',7-tetrahydroxyflavylium and 3',4',7-trihydroxyflavylium, some requirements for a good photochromic performance are discussed.
RESUMO
In the frame of the metamorphosis chemistry, where complexity is achieved at the bottom, a multistate system based on 4'-carboxy-7-hydroxyflavylium is described. Twelve species reversibly interconverted by pH and light stimuli were identified at the equilibrium or as transients. The carboxylic substituent deprotonates at moderately acidic pH values and as a consequence allows the existence of two photoactive trans-chalcones, whose irradiation leads to different photoproducts. The thermodynamic and kinetic properties of the network of reactions of the multistate system were investigated by means of UV-vis spectroscopy, stopped-flow, continuous irradiation, and flash photolysis. The evolution of the system to the equilibrium when the pH is raised from acidic to higher pH values can take place through two different routes involving the protonated or the deprotonated species at the carboxylic acid substituent. The kinetics and the photochromism of the system were rationalized by means of an energy level diagram.
RESUMO
The combination of active pharmaceutical ingredients in the form of ionic liquids or organic salts (API-OSILs) with mesoporous silica nanoparticles (MSNs) as drug carriers can provide a useful tool in enhancing the capabilities of current antibiotics, especially against resistant strains of bacteria. In this publication, the preparation of a set of three nanomaterials based on the modification of a MSN surface with cholinium ([MSN-Chol][Cip]), 1-methylimidazolium ([MSN-1-MiM][Cip]) and 3-picolinium ([MSN-3-Pic][Cip]) ionic liquids coupled with anionic ciprofloxacin have been reported. All ionic liquids and functionalized nanomaterials were prepared through sustainable protocols, using microwave-assisted heating as an alternative to conventional methods. All materials were characterized through FTIR, solution 1H NMR, elemental analysis, XRD and N2 adsorption at 77 K. The prepared materials showed no in vitro cytotoxicity in fibroblasts viability assays. The minimum inhibitory concentration (MIC) for all materials was tested against Gram-negative K. pneumoniae and Gram-positive Enterococcus spp., both with resistant and sensitive strains. All sets of nanomaterials containing the anionic antibiotic outperformed free ciprofloxacin against resistant and sensitive forms of K. pneumoniae, with the prominent case of [MSN-Chol][Cip] suggesting a tenfold decrease in the MIC against sensitive strains. Against resistant K. pneumoniae, a five-fold decrease in the MIC was observed for all sets of nanomaterials compared with neutral ciprofloxacin. Against Enterococcus spp., only [MSN-1-MiM][Cip] was able to demonstrate a slight improvement over the free antibiotic.
RESUMO
The present contribution aims to enhance solar cells' performance via the development of advanced luminescent down-shifting based on encapsulated nanostructured perovskite materials. Here, thin films of inorganic lead halide (CsPbBr3) perovskite nanocrystal luminophores were synthetized, by hot-injection, deposited on glass substrates by spin-coating, and encapsulated with parylene type C, via chemical vapor deposition, to protect and stabilize the films. The optical properties of these thin films were characterized by absorption, emission and 2D contour spectra, their structure by X-ray diffraction and X-ray photoelectron spectroscopy, and the morphology by Scanning Transmission Electron microscopy. I-V curve and spectral response nanocrystalline silicon photovoltaic (nc-Si:H PV) cells were studied in the absence and presence of the perovskite and parylene luminescent down-shifting layers. The incorporation of the CsPbBr3 nanocrystals and their encapsulation with the parylene type C polymeric coating led to an increase in the current generated and the spectral response of the PV cells in the regime of the nanocrystals' fluorescence emission. A 3.1% increase in the short circuit current density and a 5.6% increase in the power conversion efficiency were observed.
RESUMO
The introduction of an ester group in the flavylium core allowed the reversible conversion between two different flavylium compounds each one exhibiting its own reaction network. An unidirectional switching cycle between 7-diethylamino-2-(4-(methoxycarbonyl)phenyl)-1-benzopyrylium and 2-(4-carboxyphenyl)-7-diethylamino-1-benzopyrylium was achieved by means of alternate acid and base stimuli. Addition of base to a methanolic solution of the ester derivative gives rise to the trans-chalcone of the parent carboxylic acid, which upon acidification of the solution forms the respective flavylium cation. This species esterifies under very acidic conditions to restore the original methyl ester derivative. The chemical reaction networks of both compounds were fully characterized from their thermodynamic and kinetic aspects, by a series of pH jumps followed by UV-vis absorption and emission spectroscopy, stopped flow and (1)H NMR. The crystal structure of the trans-chalcone of the ester derivative was unveiled showing a supramolecular structure involving hydrogen bonding.
RESUMO
Recrystallization of [MoO(2)Cl{HC(3,5-Me(2)pz)(3)}]Cl [where HC(3,5-Me(2)pz)(3) is tris(3,5-dimethyl-1H-pyrazol-1-yl)methane] led to the isolation of large quantities of the dinuclear complex dichlorido-2κ(2)Cl-µ-oxido-κ(2)O:O-tetraoxido-1κ(2)O,2κ(2)O-[tris(3,5-dimethyl-1H-pyrazol-1-yl-1κN(2))methane]dimolybdenum(IV) acetonitrile monosolvate, [Mo(2)Cl(2)O(4)(C(16)H(22)N(6))]·CH(3)CN or [{MoO(2)Cl(2)}(µ(2)-O){MoO(2)[HC(3,5-Me(2)pz)(3)]}]·CH(3)CN. At 150â K, this complex cocrystallizes in the orthorhombic space group Pbcm with an acetonitrile molecule. The complex has mirror symmetry: only half of the complex constitutes the asymmetric unit and all the heavy elements (namely Mo and Cl) are located on the mirror plane. The acetonitrile molecule also lies on a mirror plane. The two crystallographically independent Mo(6+) centres have drastically different coordination environments: while one Mo atom is hexacoordinated and chelated to HC(3,5-Me(2)pz)(3) (which occupies one face of the octahedron), the other Mo atom is instead pentacoordinated, having two chloride anions in the apical positions of the distorted trigonal bipyramid. This latter coordination mode of Mo(VI) was found to be unprecedented. Individual complexes and solvent molecules are close-packed in the solid state, mediated by various supramolecular contacts.
RESUMO
The complex [MoO(2)Cl{HC(3,5-Me(2)pz)(3)}]BF(4) (1) (HC(3,5-Me(2)pz)(3) = tris(3,5-dimethyl-1-pyrazolyl)methane) has been prepared and examined as a catalyst for epoxidation of olefins at 55 °C using tert-butyl hydroperoxide (TBHP) as the oxidant. For reaction of cis-cyclooctene, epoxycyclooctane is obtained quantitatively within 5 h when water is rigorously excluded from the reaction mixture. Increasing amounts of water in the reaction mixture lead to lower activities (without affecting product selectivity) and transformation of 1 into the trioxidomolybdenum(VI) complex [{HC(3,5-Me(2)pz)(3)}MoO(3)] (4). Complex 4 was isolated as a microcrystalline solid by refluxing a suspension of 1 in water. The powder X-ray diffraction pattern of 4 can be indexed in the orthorhombic Pnma system, with a = 16.7349(5) Å, b = 13.6380(4) Å, and c = 7.8513(3) Å. Treatment of 1 in dichloromethane with excess TBHP led to isolation of the symmetrical [Mo(2)O(4)(µ(2)-O){HC(3,5-Me(2)pz)(3)}(2)](BF(4))(2) (2) and unsymmetrical [Mo(2)O(3)(O(2))(2)(µ(2)-O)(H(2)O){HC(3,5-Me(2)pz)(3)}] (3) oxido-bridged dimers, which were characterized by single-crystal X-ray diffraction. Complex 2 displays the well-known (Mo(2)O(5))(2+) bridging structure where each dioxidomolybdenum(VI) center is coordinated to three N atoms of the organic ligand and one µ(2)-bridging O atom. The unusual complex 3 comprises dioxido and oxidodiperoxo molybdenum(VI) centers linked by a µ(2)-bridging O atom, with the former center being coordinated to the tridentate N-ligand. The dinuclear complexes exhibit a similar catalytic performance to that found for mononuclear 1. For complexes 1 and 2 use of the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate and N-butyl-3-methylpyridinium tetrafluoroborate as solvents allowed the complexes to be completely dissolved, and in each case the catalyst and IL could be recycled and reused without loss of activity.
Assuntos
Molibdênio/química , Compostos Organometálicos/química , Compostos Organometálicos/síntese química , Pirazóis/química , Catálise , Cristalografia por Raios X , Modelos Moleculares , Conformação MolecularRESUMO
Several organic salts based on the combination of two different choline derivative cations and MnCl3-, GdCl4- and TbCl4- as anions were immobilized in mesoporous silica nanoparticles (MSNs) by a two-step synthetic method. Firstly, MSNs were functionalized with choline derivative cations with chloride anions and then the metals were incorporated by the reaction of the chloride with the respective metal chloride salts. These nanomaterials were fully characterized by different characterization techniques such as 1H-NMR, FT-IR, elemental analysis, TEM, TGA, N2 adsorption, XRD and DLS. These characterization data were important to confirm the successful functionalization of the nanomaterials and to access their textural properties and colloidal stability. The final materials were also characterized by ICP-MS that indicated the metal contents. The cytotoxicity profile was evaluated in four different cell lines (3T3, 293T, HepG2 and Caco-2), which shows some relevant differences between the metal organic salts and their immobilized analogues.
Assuntos
Elementos da Série dos Lantanídeos/química , Manganês/química , Nanopartículas/química , Dióxido de Silício/química , Animais , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Humanos , Elementos da Série dos Lantanídeos/toxicidade , Manganês/toxicidade , Camundongos , Nanopartículas/toxicidade , Nanopartículas/ultraestrutura , Porosidade , Sais/química , Dióxido de Silício/toxicidadeRESUMO
Mesoporous silica nanoparticles (MSNs) are very promising nanomaterials for treating bacterial infections when combined with pharmaceutical drugs. Herein, we report the preparation of two nanomaterials based on the immobilization of ciprofloxacin in mesoporous silica nanoparticles, either as the counter-ion of the choline derivative cation (MSN-[Ch][Cip]) or via anchoring on the surface of amino-group modified MSNs via an amide bond (MSN-Cip). Both nanomaterials were characterized by TEM, FTIR and solution 1H NMR spectroscopies, elemental analysis, XRD and N2 adsorption at 77 K in order to provide the desired structures. No cytotoxicity from the prepared mesoporous nanoparticles on 3T3 murine fibroblasts was observed. The antimicrobial activity of the nanomaterials was determined against Gram-positive (Staphylococcus aureus and Bacillus subtilis) and Gram-negative (Klebsiella pneumoniae) bacteria and the results were promising against S. aureus. In the case of B. subtilis, both nanomaterials exhibited higher antimicrobial activity than the precursor [Ch][Cip], and in the case of K. pneumoniae they exhibited higher activity than neutral ciprofloxacin.
RESUMO
The reaction of [MoO(2)Cl(2)(bipy)] (1) (bipy = 2,2'-bipyridine) with water in a Teflon-lined stainless steel autoclave (100 degrees C, 19 h), in an open reflux system with oil bath heating (12 h) or in a microwave synthesis system (120 degrees C, 4 h), gave the molybdenum oxide/bipyridine hybrid material {[MoO(3)(bipy)][MoO(3)(H(2)O)]}(n) (2) as a microcrystalline powder in yields of 72-92%. The crystal structure of 2 determined from synchrotron X-ray powder diffraction data is composed of two distinct neutral one-dimensional polymers: an organic-inorganic polymer, [MoO(3)(bipy)](n), and a purely inorganic chain, [MoO(3)(H(2)O)](n), which are interconnected by O-H...O hydrogen bonding interactions. Compound 2 is a moderately active, stable, and selective catalyst for the epoxidation of cis-cyclooctene at 55 degrees C with tert-butylhydroperoxide (tBuOOH, 5.5 M in decane or 70% aqueous) as the oxidant. Biphasic solid-liquid or triphasic solid-organic-aqueous mixtures are formed, and 1,2-epoxycyclooctane is the only reaction product. When n-hexane is employed as a cosolvent and tBuOOH(decane) is the oxidant, the catalytic reaction is heterogeneous in nature, and the solid catalyst can be recycled and reused without a loss of activity. For comparison, the catalytic performance of the precursor 1 was also investigated. The IR spectra of solids recovered after catalysis indicate that 1 transforms into the organic-inorganic polymer [MoO(3)(bipy)] when the oxidant is tBuOOH(decane) and compound 2 when the oxidant is 70% aqueous tBuOOH.
Assuntos
2,2'-Dipiridil/química , Ciclo-Octanos/química , Compostos de Epóxi/química , Molibdênio/química , Compostos Organometálicos/química , Compostos Organometálicos/síntese química , Catálise , Cristalografia por Raios X , Temperatura Alta , Micro-Ondas , Modelos Moleculares , Conformação Molecular , EstereoisomerismoRESUMO
In the title compound, (C(5)H(6)N)(3)[MoCl(4)O(2)]Cl, the pyridinium cations are N-Hâ¯Cl hydrogen bonded to the anionic [MoCl(4)O(2)](2-) complexes and to the two crystallographically independent chloride anions (located on C2 axes). The Mo(6+) centre adopts a highly distorted octa-hedral geometry, being surrounded by four chloride and two terminal oxide groups. The oxide ligands are mutually cis.
RESUMO
The title salt, (C(5)H(6)N)(4)[Mo(2)Cl(2)O(5)(SO(4))(2)], comprises four pyridinium cations for each [(MoClO(2))(2)(µ-O)(µ-SO(4))(2)](4-) anionic unit. The asymmetric unit consists of three aggregates of the empirical formula. The tetra-anionic bimetallic molybdenum(VI) cluster is unprecedented and contains two sulfate and one oxide bridges. This structure constitutes the first example of a non-polymeric compound with terminal oxide, sulfate and halide ligands bonded to the same metal. The hydrogen bonds connecting the pyridinium cations to the molybdenum clusters are diverse, varying from strong and directional interactions to bifurcated bonds with a subsequent loss of directionality.
RESUMO
Developing organic semiconductors for organic thin film transistors (OTFT) and optoelectronic applications is a challenge. We developed highly crystalline pentacyclic diimides (3) and (4) which showed good OTFT and OLED potential and energy gaps of 2.60 eV and 2.54 eV. They exhibited interesting photo and eletroluminescence activity. Both compounds showed good quantum yields (0.56 for (3) and 0.60 for (4)).
RESUMO
The oxodiperoxo complex MoO(O2)(2)(tbbpy) (tbbpy = 4,4'-di-tert-butyl-2,2'- bipyridine) was isolated from the reaction of MoO2Cl(2)(tbbpy) in water under microwaveassisted heating at 120 masculineC for 4 h. The structure of the oxodiperoxo complex was determined by single crystal X-ray diffraction. The Mo(VI) centre is seven-coordinated with a geometry which strongly resembles a highly distorted bipyramid. Individual MoO(O2)(2)(tbbpy) complexes are interdigitated along the [010] direction to form a column. The crystal structure is formed by the close packing of the columnar-stacked complexes. Interactions between neighbouring columns are essentially of van der Waals type mediated by the need to effectively fill the available space.
Assuntos
Micro-Ondas , Molibdênio/química , Compostos Organometálicos/química , Cristalografia por Raios X , Modelos Moleculares , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Oxomolybdenum(VI) complexes of 3,4-dihydroxybenzoic acid (3,4-H 2dhb) have been incorporated into layered double hydroxides (LDHs) by treatment of the LDH-nitrate (Zn-Al, Mg-Al) or LDH-chloride (Li-Al) precursors with aqueous or water/ethanol solutions of the complex (NMe 4) 2[MoO 2(3,4-dhb) 2].2H 2O at 50 or 100 degrees C. The texture and chemical composition of the products were investigated by elemental analysis and scanning electron microscopy (SEM) with coupled energy dispersive spectroscopy (EDS). Microanalysis for N and EDS analysis for Cl showed that at least 90% of nitrate or chloride ions were replaced during the ion exchange reactions. The final Mo content in the materials varied between 6.5 and 11.6 wt %. Mo K-edge EXAFS analysis, supported by IR, Raman, UV-vis, and (13)C{ (1)H} CP/MAS NMR spectroscopic studies, showed the presence of cointercalated [MoO 2(3,4-dhb) 2] ( m- ) and [Mo 2O 5(3,4-dhb) 2] ( m- ) complexes in proportions that depend on the type of LDH support and the reaction conditions. The binuclear bis(catecholate) complex, with a Mo...Mo separation of 3.16 A, was the major species intercalated in the Zn-Al and Li-Al products prepared using only water as solvent. The X-ray powder diffraction (XRPD) patterns of all the Mo-containing LDHs showed the formation of an expanded phase with a basal spacing around 15.4 A. High-resolution synchrotron XRPD patterns were indexed with hexagonal unit cells with a c-axis of either 30.7 (for Li-Al-Mo LDHs) or 45.9 A (for a Zn-Al-Mo LDH). Fourier maps ( F obs) calculated from the integrated intensities extracted from Le Bail profile decompositions indicated that the binuclear guest species are positioned such that the Mo --> Mo vector is parallel to the host layers, and the overall orientation of the complex is perpendicular to the same layers. The thermal behavior of selected materials was studied by variable-temperature XRPD, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC).
RESUMO
A four component host-guest system comprising ß-cyclodextrin (ß-CD), cucurbit[7]uril (CB7) and two chalcone guests was demonstrated to undergo pH-triggered self-sorting in aqueous solution. This phenomenon arises from the contrasting complexation induced pKa shifts displayed by these guests after complexation with CB7.
RESUMO
Cucurbit[7]uril inclusion complexes with guests bearing dimethylamino groups show the expected upward pK a shifts, whereas their diethylamino counterparts display a decrease in pK a due to the preferential stabilization of the unprotonated form. These results identify the diethylamino group as the substituent of choice to avoid receptor-assisted protonation of guest molecules and present new evidence for the role of the hydrophobic effect as a driving force in cucurbituril complexation.
RESUMO
The effect of ß-cyclodextrin on the mole fraction distribution of the multistate species of the anthocyanin model compound, 3-methoxy-4',7-dihydroxyflavylium, was studied by NMR, stopped flow, circular dichroism, and UV-visible absorption spectroscopy. The formation of inclusion complexes with hemiketal and trans-chalcone, possessing transition dipole moments in a parallel orientation to the cyclodextrin n-fold axis, was unequivocally proved by means of the positive-induced circular dichroism signal. The discrimination of the two hemiketal enantiomers was achieved by the splitting of 1H NMR peaks in the presence ß-cyclodextrin. The spectroscopic data shows that the ß-cyclodextrin has only moderate enantioselectivity, slightly favoring one of the optical isomers. The observed binding affinity of ß-cyclodextrin for the 3-methoxy-4',7-dihydroxyflavylium multistate species increases in the order flavylium cation < quinoidal base < hemiketal < trans-chalcone < cis-chalcone. As a result of this selectivity and the dynamic nature of the network, the equilibrium is displaced toward the formation of the chalcone species.