RESUMO
The goal of proteomics experiments is to identify proteins to observe changes in cellular processes and diseases. One challenge in proteomics is the removal of contaminants following protein extraction, which can limit protein identifications. Single-pot, solid-phase-enhanced sample preparation (SP3) is a cleanup technique in which proteins are captured on carboxylate-modified particles through a proposed hydrophilic-interaction-liquid-chromatography (HILIC)-like mechanism. Recent results have suggested that proteins are captured in SP3 due to a protein-aggregation mechanism. Solvent precipitation, single-pot, solid-phase-enhanced sample preparation (SP4) is a newer cleanup technique that employs protein aggregation to capture proteins without modified particles. We hypothesize that differences in capture mechanisms of SP3 and SP4 affect which proteins are identified by each cleanup technique. Herein, we assess the proteins identified and enriched using SP3 versus SP4 for MCF7 subcellular fractions and correlate protein capture in each method to protein hydrophobicity. Our results indicate that SP3 captures more hydrophilic proteins through a combination of HILIC-like and protein-aggregation mechanisms, while SP4 captures more hydrophobic proteins through a protein-aggregation mechanism. Ultimately, we demonstrate that protein-capture mechanisms are distinct, and the selection of a cleanup technique that yields high proteome coverage is dependent on protein-sample hydrophobicity. Data has been deposited into MassIVE (MSV000094130) and ProteomeXchange (PXD049965).
RESUMO
Unraveling the mechanism by which native proteins are charged through electrospray ionization (ESI) has been the focus of considerable research because observable charge states can be correlated to biophysical characteristics, such as protein folding and, thus, solution conformation. Difficulties in characterizing electrosprayed droplets have catalyzed the use of molecular dynamics (MD) to provide insights into the mechanisms by which proteins are charged and transferred to the gas phase. However, prior MD studies have utilized metal ions, primarily Na+, as charge carriers, even though proteins are primarily detected as protonated ions in the mass spectra. Here, we propose a modified MD protocol for simulating discrete Grotthuss diffuse H3O+ that is capable of dynamically altering amino-acid protonation states to model electrospray charging and gaseous ion formation of model proteins, ubiquitin, and myoglobin. Application of the protocol to the evaporation of acidic droplets enables a molecular perspective of H3O+ coordination and proton transfer to/from proteins, which is unfeasible with the metal charge carriers used in previous MD studies of ESI. Our protocol recreates experimentally observed charge-state distributions and supports the charge residue model (CRM) as the dominant mechanism of native protein ionization during ESI. Additionally, our results suggest that protonation is highly specific to individual residues and is correlated to the formation of localized hydrated regions on the protein surface as droplets desolvate. Considering the use of discrete H3O+ instead of Na+, the developed protocol is a necessary step toward developing a more comprehensive model of protein ionization during ESI.
Assuntos
Simulação de Dinâmica Molecular , Prótons , Espectrometria de Massas por Ionização por Electrospray/métodos , Mioglobina/química , Íons/química , Gases/químicaRESUMO
Carbohydrates have various biological functions that are based on their structures. However, the composition and the glycosidic-bond linkage and configuration of carbohydrates present challenges for their characterization. Furthermore, isomeric features contribute to the formation of intramolecular hydrogen bonds, which influence the flexibility and dynamics of carbohydrates. Hydrogen/deuterium exchange-mass spectrometry (HDX-MS) enables the analysis of protein dynamics by monitoring deuterium labeling after HDX for different lengths of time. In-electrospray ionization (in-ESI) HDX-MS has been used to rapidly label solvated carbohydrates with labeling occurring during desolvation of ESI droplets. Therefore, HDX-labeling times can be altered by changing the spray-solvent conductivity, which changes the initial size of ESI droplets and their resulting lifetimes. Here, we utilize in-ESI HDX-MS to characterize nine isomeric disaccharides with different monosaccharide compositions and glycosidic-bond linkages and configurations. We compared both the relative D-uptake of isomers at individual conductivities, or HDX-labeling times, and the trends associated with labeling at multiple conductivities. Interestingly, the relative D-uptake trends were correlated to isomeric features that affect disaccharide flexibility, including formation of intramolecular hydrogen bonds. Among the isomeric features studied, linkage was observed to have a significant influence on relative D-uptake with (1-3)-linked disaccharides having more change in relative D-uptake with changing conductivity compared to other linkages. Overall, this research illustrates how in-ESI HDX-MS can be applied to structurally characterize disaccharides with distinct isomeric features. Furthermore, this work shows that in-ESI HDX-MS can be used to monitor the dynamics of solvated molecules with rapidly exchanging functional groups.
Assuntos
Dissacarídeos , Espectrometria de Massa com Troca Hidrogênio-Deutério , Espectrometria de Massas por Ionização por Electrospray , Espectrometria de Massas por Ionização por Electrospray/métodos , Dissacarídeos/química , Solventes/química , Ligação de Hidrogênio , IsomerismoRESUMO
Tandem mass spectrometry (MS/MS) using fragmentation has become one of the most effective methods for gaining sequence and structural information on biomolecules. Ion/ion reactions are competitive reactions, where either proton transfer (PT) or electron transfer (ET) can occur from interactions between multiply charged cations and singly charged anions. Utilizing ion/ion reactions with fluoranthene has offered a unique method of fragment formation for the structural elucidation of biomolecules. Fluoranthene is considered an ideal anion reagent because it selectively causes electron-transfer dissociation (ETD) and minimizes PT when interacting with peptides. However, limited investigations have sought to understand how fluorantheneâthe primary, commercially available anion reagentâinteracts with other biomolecules. Here, we apply deuterium labeling to investigate ion/ion reaction mechanisms between fluoranthene and divalent, metal-adducted carbohydrates (Ca2+, Mg2+, Co2+, and Ni2+). Deuterium labeling of carbohydrates allowed us to observe evidence of hydrogen/deuterium exchange (HDX) occurring after ion/ion dissociation reactions. The extent of deuterium loss is dependent on several factors, including the physical properties of the metal ion and the fragment structure. Based on the deuterium labeling data, we have proposed ETD, PTD, and intermolecular PTâalso described as HDXâmechanisms. This research provides a fundamental perspective of ion/ion and ion/molecule reaction mechanisms and illustrates properties that impact ion/ion and ion/molecule reactions for carbohydrates. Together, this could improve the capability to distinguish complex and heterogeneous biomolecules, such as carbohydrates.
Assuntos
Prótons , Espectrometria de Massas em Tandem , Deutério , Carboidratos , Ânions , Medição da Troca de Deutério/métodosRESUMO
Glycans, carbohydrates, and glycoconjugates are involved in many crucial biological processes, such as disease development, immune responses, and cell-cell recognition. Glycans and carbohydrates are known for the large number of isomeric features associated with their structures, making analysis challenging compared with other biomolecules. Mass spectrometry has become the primary method of structural characterization for carbohydrates, glycans, and glycoconjugates. Metal adduction is especially important for the mass spectrometric analysis of carbohydrates and glycans. Metal-ion adduction to carbohydrates and glycoconjugates affects ion formation and the three-dimensional, gas-phase structures. Herein, we discuss how metal-ion adduction impacts ionization, ion mobility, ion activation and dissociation, and hydrogen/deuterium exchange for carbohydrates and glycoconjugates. We also compare the use of different metals for these various techniques and highlight the value in using metals as charge carriers for these analyses. Finally, we provide recommendations for selecting a metal for analysis of carbohydrate adducts and describe areas for continued research.
RESUMO
The biological role of the bacterial chloramphenicol (Chl)-resistance enzyme, chloramphenicol acetyltransferase (CAT), has seen renewed interest due to the resurgent use of Chl against multi-drug-resistant microbes. This looming threat calls for more rationally designed antibiotic derivatives that have improved antimicrobial properties and reduced toxicity in humans. Herein, we utilize native ion mobility spectrometry-mass spectrometry (IMS-MS) to investigate the gas-phase structure and thermodynamic stability of the type I variant of CAT from Escherichia coli (EcCATI) and several EcCATI:ligand-bound complexes. EcCATI readily binds multiple Chl without incurring significant changes to its gas-phase structure or stability. A non-hydrolyzable acetyl-CoA derivative (S-ethyl-CoA, S-Et-CoA) was used to kinetically trap EcCATI and Chl in a ternary, ligand-bound state (EcCATI:S-Et-CoA:Chl). Using collision-induced unfolding (CIU)-IMS-MS, we find that Chl dissociates from EcCATI:S-Et-CoA:Chl complexes at low collision energies, while S-Et-CoA remains bound to EcCATI even as protein unfolding occurs. Gas-phase binding constants further suggest that EcCATI binds S-Et-CoA more tightly than Chl. Both ligands exhibit negative cooperativity of subsequent ligand binding in their respective binary complexes. While we observe no significant change in structure or stability to EcCATI when bound to either or both ligands, we have elucidated novel gas-phase unfolding and dissociation behavior and provided a foundation for further characterization of alternative substrates and/or inhibitors of EcCATI.
Assuntos
Escherichia coli , Humanos , Cloranfenicol O-Acetiltransferase/química , Cloranfenicol O-Acetiltransferase/metabolismo , Ligantes , Acetilcoenzima A , Espectrometria de Massas/métodos , Escherichia coli/química , TermodinâmicaRESUMO
Hydrogen/deuterium exchange coupled to mass spectrometry (HDX-MS) is a well-established technique for structural analysis of proteins. In HDX experiments it is common to label for multiple, different lengths of time to characterize protein structures and dynamics. However, applications of HDX to carbohydrates have been limited due to the rapid exchange rates of hydroxyls, which have also prevented the development and application of methods that sample HDX at multiple timepoints. Theta capillaries pulled to electrospray tips have been used to achieve microsecond reaction times. Here, we report the utilization of theta-ESI emitters to achieve multiple timepoints for deuteration of carbohydrates. We increased the labeling time for HDX by increasing the initial ESI droplet sizes using theta-ESI emitters with increasing tip opening sizes. The reaction times achieved by varying the tip sizes ranged from sub-microsecond to â¼20 µs, with the average number of deuterium exchanges varying from 0.5 ± 0.2 D to 5 ± 3 D for sodium-adducted melezitose, which contains 11 labile hydrogens. Our findings are significant because this is the first report of carbohydrates analyzed by solution-phase HDX to achieve multiple H/D exchange timepoints.
Assuntos
Espectrometria de Massa com Troca Hidrogênio-Deutério/instrumentação , Espectrometria de Massas por Ionização por Electrospray/instrumentação , Trissacarídeos/química , Espectrometria de Massa com Troca Hidrogênio-Deutério/métodos , Estrutura Molecular , Espectrometria de Massas por Ionização por Electrospray/métodosRESUMO
Hydrogen-deuterium exchange mass spectrometry (HDX-MS) is an established, powerful tool for investigating protein-ligand interactions, protein folding, and protein dynamics. However, HDX-MS is still an emergent tool for quality control of biopharmaceuticals and for establishing dynamic similarity between a biosimilar and an innovator therapeutic. Because industry will conduct quality control and similarity measurements over a product lifetime and in multiple locations, an understanding of HDX-MS reproducibility is critical. To determine the reproducibility of continuous-labeling, bottom-up HDX-MS measurements, the present interlaboratory comparison project evaluated deuterium uptake data from the Fab fragment of NISTmAb reference material (PDB: 5K8A ) from 15 laboratories. Laboratories reported â¼89â¯800 centroid measurements for 430 proteolytic peptide sequences of the Fab fragment (â¼78â¯900 centroids), giving â¼100% coverage, and â¼10â¯900 centroid measurements for 77 peptide sequences of the Fc fragment. Nearly half of peptide sequences are unique to the reporting laboratory, and only two sequences are reported by all laboratories. The majority of the laboratories (87%) exhibited centroid mass laboratory repeatability precisions of ⟨ sLab⟩ ≤ (0.15 ± 0.01) Da (1σxÌ ). All laboratories achieved ⟨sLab⟩ ≤ 0.4 Da. For immersions of protein at THDX = (3.6 to 25) °C and for D2O exchange times of tHDX = (30 s to 4 h) the reproducibility of back-exchange corrected, deuterium uptake measurements for the 15 laboratories is σreproducibility15 Laboratories( tHDX) = (9.0 ± 0.9) % (1σ). A nine laboratory cohort that immersed samples at THDX = 25 °C exhibited reproducibility of σreproducibility25C cohort( tHDX) = (6.5 ± 0.6) % for back-exchange corrected, deuterium uptake measurements.
Assuntos
Anticorpos Monoclonais/química , Espectrometria de Massa com Troca Hidrogênio-Deutério , Fragmentos Fab das Imunoglobulinas/análiseRESUMO
Membrane proteins are currently the most common targets for pharmaceuticals. However, characterization of their structural dynamics by hydrogen/deuterium exchange mass spectrometry (HDX-MS) is sparse due to insufficient automated methods to handle full-length membrane proteins in lipid bilayers. Additionally, membrane lipids used to mimic the membrane environment and to solubilize membrane proteins can impair chromatography performance and cause ion suppression in the mass spectrometer. The workflow discussed herein advances HDX-MS capabilities and other MS applications for membrane proteins by providing a fully automated method for HDX-MS analysis based on a phospholipid removal scheme compatible with robotic handling. Phospholipids were depleted from protein samples by the addition of zirconium oxide beads, which were subsequently removed by inline filtration using syringeless nanofilters. To demonstrate this method, single-pass transmembrane protein FcγRIIa (CD32a) expressed into liposomes was used. Successful depletion of phospholipids ensured optimal liquid-chromatography-mass-spectrometry performance, and measurement of peptides from the transmembrane domain of FcγRIIa indicated phospholipids associated with this region were either not present or did not shield the transmembrane domain from digestion by pepsin. Furthermore, amino acid sequence coverage provided by this method was suitable to enable future measurement of structural dynamics of ectodomain, transmembrane domain, and endodomain of FcγRIIa. Moreover, this method is the first to enable fully automated HDX-MS on full-length transmembrane proteins in lipid bilayers, a notable advancement to facilitate understanding of membrane proteins, development of pharmaceuticals, and characterization for regulatory agencies.
Assuntos
Espectrometria de Massas/métodos , Peptídeos/análise , Fosfolipídeos/isolamento & purificação , Receptores de IgG/química , Sequência de Aminoácidos , Humanos , Lipossomos/química , Modelos Moleculares , Fluxo de Trabalho , Zircônio/químicaRESUMO
PPM serine/threonine protein phosphatases function in signaling pathways and require millimolar concentrations of Mn2+ or Mg2+ ions for activity. Whereas the crystal structure of human PP2Cα displayed two tightly bound Mn2+ ions in the active site, recent investigations of PPM phosphatases have characterized the binding of a third, catalytically essential metal ion. The binding of the third Mg2+ to PP2Cα was reported to have millimolar affinity and to be entropically driven, suggesting it may be structurally and catalytically important. Here, we report the use of hydrogen/deuterium exchange-mass spectrometry and molecular dynamics to characterize conformational changes in PP2Cα between the active and inactive states. In the presence of millimolar concentrations of Mg2+, metal-coordinating residues in the PP2Cα active site are maintained in a more rigid state over the catalytically relevant time scale of 30-300 s. Submillimolar Mg2+ concentrations or introduction of the D146A mutation increased the conformational mobility in the Flap subdomain and in buttressing helices α1 and α2. Residues 192-200, located in the Flap subdomain, exhibited the greatest interplay between effects of Mg2+ concentration and the D146A mutation. Molecular dynamics simulations suggest that the presence of the third metal ion and the D146A mutation each produce distinct conformational realignments in the Flap subdomain. These observations suggest that the binding of Mg2+ to the D146/D239 binding site stabilizes the conformation of the active site and the Flap subdomain.
Assuntos
Medição da Troca de Deutério , Proteína Fosfatase 2C/química , Proteína Fosfatase 2C/metabolismo , Sítios de Ligação , Humanos , Espectrometria de Massas , Conformação ProteicaRESUMO
Monoclonal antibody pharmaceuticals are the fastest-growing class of therapeutics, with a wide range of clinical applications. To assure their safety, these protein drugs must demonstrate highly consistent purity and stability. Key to these objectives is higher order structure measurements validated by calibration to reference materials. We describe preparation, characterization, and crystal structure of the Fab fragment prepared from the NIST Reference Antibody RM 8671 (NISTmAb). NISTmAb is a humanized IgG1κ antibody, produced in murine cell culture and purified by standard biopharmaceutical production methods, developed at the National Institute of Standards and Technology (NIST) to serve as a reference material. The Fab fragment was derived from NISTmAb through papain cleavage followed by protein A based purification. The purified Fab fragment was characterized by SDS-PAGE, capillary gel electrophoresis, multi-angle light scattering, size exclusion chromatography, mass spectrometry, and x-ray crystallography. The crystal structure at 0.2 nm resolution includes four independent Fab molecules with complete light chains and heavy chains through Cys 223, enabling assessment of conformational variability and providing a well-characterized reference structure for research and engineering applications. This nonproprietary, publically available reference material of known higher-order structure can support metrology in biopharmaceutical applications, and it is a suitable platform for validation of molecular modeling studies.
Assuntos
Anticorpos Monoclonais Humanizados/química , Fragmentos Fab das Imunoglobulinas/química , Imunoglobulina G/química , Domínios Proteicos , Animais , Anticorpos Monoclonais Humanizados/imunologia , Anticorpos Monoclonais Humanizados/isolamento & purificação , Fenômenos Biofísicos , Cromatografia em Gel , Cristalografia por Raios X , Eletroforese Capilar , Eletroforese em Gel de Poliacrilamida , Fragmentos Fab das Imunoglobulinas/imunologia , Fragmentos Fab das Imunoglobulinas/isolamento & purificação , Imunoglobulina G/imunologia , Imunoglobulina G/isolamento & purificação , Espectrometria de Massas , Camundongos , Modelos Moleculares , Ligação Proteica/imunologia , Padrões de ReferênciaRESUMO
Protein separations in CZE suffer from nonspecific adsorption of analytes to the capillary surface. Semipermanent phospholipid bilayers have been used to minimize adsorption, but must be regenerated regularly to ensure reproducibility. We investigated the formation, characterization, and use of hybrid phospholipid bilayers (HPBs) as more stable biosurfactant capillary coatings for CZE protein separations. HPBs are formed by covalently modifying a support with a hydrophobic monolayer onto which a self-assembled lipid monolayer is deposited. Monolayers prepared in capillaries using 3-cyanopropyldimethylchlorosilane (CPDCS) or n-octyldimethylchlorosilane (ODCS) yielded hydrophobic surfaces with lowered surface free energies of 6.0 ± 0.3 or 0.2 ± 0.1 mJ m(-2) , respectively, compared to 17 ± 1 mJ m(-2) for bare silica capillaries. HPBs were formed by subsequently fusing vesicles comprised of 1,2-dilauroyl-sn-glycero-3-phosphocholine or 1,2-dioleoyl-sn-glycero-3-phosphocholine to CPDCS- or ODCS-modified capillaries. The resultant HPB coatings shielded the capillary surface and yielded reduced electroosmotic mobility (1.3-1.9 × 10(-4) cm(2) V(-1) s(-1) ) compared to CPDCS- and ODCS-modified or bare capillaries (3.6 ± 0.2 × 10(-4) cm(2) V(-1) s(-1) , 4.8 ± 0.4 × 10(-4) cm(2) V(-1) s(-1) , and 6.0 ± 0.2 × 10(-4) cm(2) V(-1) s(-1) , respectively), with increased stability compared to phospholipid bilayer coatings. HPB-coated capillaries yielded reproducible protein migration times (RSD ≤ 3.6%, n ≥ 6) with separation efficiencies as high as 200 000 plates/m.
Assuntos
Eletroforese Capilar/instrumentação , Fosfolipídeos/química , Animais , Bovinos , Galinhas , Quimotripsinogênio/isolamento & purificação , Cavalos , Muramidase/isolamento & purificação , Mioglobina/isolamento & purificação , Propriedades de SuperfícieRESUMO
Transmembrane protein (TMP)-functionalized materials have resulted in powerful new methods in chemical analysis. Of particular interest is the development of high-throughput, TMP-functionalized stationary phases for affinity chromatography of complex mixtures of analytes. Several natural and synthetic phospholipids and lipid mimics have been used for TMP reconstitution, although the resulting membranes often lack the requisite chemical and temporal stability for long-term use, a problem that is exacerbated in flowing separation systems. Polymerizable lipids with markedly increased membrane stability and TMP functionality have been developed over the past two decades. More recently, these lipids have been incorporated into a range of analytical methods, including separation techniques, and are now poised to have a significant impact on TMP-based separations. Here, we describe current methods for preparing TMP-containing stationary phases and examine the potential utility of polymerizable lipids in TMP affinity chromatography.
Assuntos
Cromatografia de Afinidade/instrumentação , Proteínas de Membrana/química , Fosfolipídeos/química , Animais , Cromatografia de Afinidade/métodos , HumanosRESUMO
Carbohydrates are critical for cellular functions as well as an important class of metabolites. Characterizing carbohydrate structures is a difficult analytical challenge due to the presence of isomers. In-electrospray hydrogen/deuterium exchange mass spectrometry (in-ESI HDX-MS) is a method of HDX that samples the solvated structure of carbohydrates during the ESI process and requires little to no instrument modification. Traditionally, solution-phase HDX is utilized with proteins to sample conformational differences, and pH is a critical parameter to monitor and control due to the presence of both acid- and base-catalyzed mechanisms of exchange. For In-ESI HDX, the pH surrounding the analyte changes before and during labeling, which has the potential to affect the rate of labeling for analytes. Herein, we alter the pH of spray solutions containing model carbohydrates and peptides, perform in-ESI HDX-MS, and characterize the deuterium uptake trends. Varying pH results in altered D uptake, though the overall trends differ from the expected bulk-solution trends due to the electrospray process. These findings show the utility of varying pH prior to in-ESI HDX-MS for establishing different extents of HDX as well as distinguishing labile functional groups that are present in different analytes.
Assuntos
Medição da Troca de Deutério , Hidrogênio , Deutério , Medição da Troca de Deutério/métodos , Peptídeos/química , Carboidratos , Hexoses , Concentração de Íons de HidrogênioRESUMO
The goal of proteomics experiments is to identify proteins to observe changes in cellular processes and diseases. One challenge in proteomics is the removal of contaminants following protein extraction, which can limit protein identification. Single-pot, solid-phase-enhanced sample preparation (SP3) is a clean-up technique in which proteins are captured on carboxylate-modified particles through a proposed hydrophilic-interaction-liquid-chromatography (HILIC)-like mechanism. However, recent results have suggested that proteins are captured in SP3 due to a protein-aggregation mechanism. Thus, solvent precipitation, single-pot, solid-phase-enhanced sample preparation (SP4) is a newer clean-up technique that employs protein-aggregation to capture proteins without modified particles. SP4 has previously enriched low-solubility proteins, though differences in protein capture could affect which proteins are detected and identified. We hypothesize that the mechanisms of capture for SP3 and SP4 are distinct. Herein, we assess the proteins identified and enriched using SP3 versus SP4 for MCF7 subcellular fractions and correlate protein capture in each method to protein hydrophobicity. Our results indicate that SP3 captures more hydrophilic proteins through a combination of HILIC-like and protein-aggregation mechanisms, while SP4 captures more hydrophobic proteins through a protein-aggregation mechanism. From these results, we recommend clean-up techniques based on protein-sample hydrophobicity to yield high proteome coverage in biological samples.
RESUMO
Carbohydrates and glycans are integral to many biological processes, including cell-cell recognition and energy storage. However, carbohydrates are often difficult to analyze due to the high degree of isomerism present. One method being developed to distinguish these isomeric species is hydrogen/deuterium exchange-mass spectrometry (HDX-MS). In HDX-MS, carbohydrates are exposed to a deuterated reagent and the functional groups with labile hydrogen atoms, including hydroxyls and amides, exchange with the 1 amu heavier isotope, deuterium. These labels can then be detected by MS, which monitors the mass increase with the addition of D-labels. The observed rate of exchange is dependent on the exchanging functional group, the accessibility of the exchanging functional group, and the presence of hydrogen bonds. Herein, we discuss how HDX has been applied in the solution-phase, gas-phase, and during MS ionization to label carbohydrates and glycans. Additionally, we compare differences in the conformations that are labeled, the labeling timeframes, and applications of each of these methods. Finally, we comment on future opportunities for development and use of HDX-MS to analyze glycans and glycoconjugates.
Assuntos
Carboidratos , Hidrogênio , Hidrogênio/química , Deutério/química , Amidas , HexosesRESUMO
Photolytic optical gating (POG) facilitates rapid, on-line and highly sensitive analyses, though POG utilizes UV lasers for sample injection. We present a low-cost, more portable alternative, employing an ultraviolet light-emitting diode (UV-LED) array to inject caged fluorescent dyes via photolysis. Utilizing the UV-LED array, labeled amino acids were injected with nanomolar limits of detection (270 ± 30 nM and 250 ± 30 nM for arginine and citrulline, respectively). When normalized for the difference in light intensity, the UV-LED array provides comparable sensitivity to POG utilizing UV lasers. Additionally, the UV-LED array yielded sufficient beam quality and stability to facilitate coupling with a Hadamard transform, resulting in increased sensitivity. This work shows, for the first time, the use of an UV-LED for online POG with comparable sensitivity to conventional laser sources but at a lower cost.
Assuntos
Eletroforese Capilar/instrumentação , Eletroforese Capilar/métodos , Corantes Fluorescentes/química , Algoritmos , Aminoácidos/química , Equipamentos e Provisões Elétricas , Fotólise , Sensibilidade e Especificidade , Raios UltravioletaRESUMO
Previous reports present different models for the stabilization of the Fc-FcγRI immune complex. Although accord exists on the importance of L235 in IgG1 and some hydrophobic contacts for complex stabilization, discord exists regarding the existence of stabilizing glycoprotein contacts between glycans of IgG1 and a conserved FG-loop (171MGKHRY176) of FcγRIa. Complexes formed from the FcγRIa receptor and IgG1s containing biantennary glycans with N-acetylglucosamine, galactose, and α2,6-N-acetylneuraminic terminations were measured by hydrogen-deuterium exchange mass spectrometry (HDX-MS), classified for dissimilarity with Welch's ANOVA and Games-Howell post hoc procedures, and modeled with molecular dynamics (MD) simulations. For each glycoform of the IgG1-FcγRIa complex peptic peptides of Fab, Fc and FcγRIa report distinct H/D exchange rates. MD simulations corroborate the differences in the peptide deuterium content through calculation of the percent of time that transient glycan-peptide bonds exist. These results indicate that stability of IgG1-FcγRIa complexes correlate with the presence of intermolecular glycoprotein interactions between the IgG1 glycans and the 173KHR175 motif within the FG-loop of FcγRIa. The results also indicate that intramolecular glycan-protein bonds stabilize the Fc region in isolated and complexed IgG1. Moreover, HDX-MS data evince that the Fab domain has glycan-protein binding contacts within the IgG1-FcγRI complex.