In Vitro Photoinactivation of Fusarium oxysporum Conidia with Light-Activated Ammonium Phthalocyanines.

Antimicrobial photodynamic therapy (aPDT) has been explored as an innovative therapeutic approach because it can be used to inactivate a variety of microbial forms (vegetative forms and spores) without causing significant damage to host tissues, and without the development of resistance to the photosensitization process. This study assesses the photodynamic antifungal/sporicidal activity of tetra- and octasubstituted phthalocyanine (Pc) dyes with ammonium groups. Tetra- and octasubstituted zinc(II) phthalocyanines (1 and 2) were prepared and tested as photosensitizers (PSs) on Fusarium oxysporum conidia. Photoinactivation (PDI) tests were conducted with photosensitizer (PS) concentrations of 20, 40, and 60 µM under white-light exposure at an irradiance of 135 mW·cm-2, applied during 30 and 60 min (light doses of 243 and 486 J·cm-2). High PDI efficiency corresponding to the inactivation process until the detection limit was observed for both PSs. The tetrasubstituted PS was the most effective, requiring the lowest concentration and the shortest irradiation time for the complete inactivation of conidia (40 µM, 30 min, 243 J·cm-2). Complete inactivation was also achieved with PS 2, but a longer irradiation time and a higher concentration (60 µM, 60 min, 486 J·cm-2) were necessary. Because of the low concentrations and moderate energy doses required to inactivate resistant biological forms such as fungal conidia, these phthalocyanines can be considered potent antifungal photodynamic drugs.

An insight on the role of photosensitizer nanocarriers for Photodynamic Therapy.

Photodynamic therapy (PDT) is a modality of cancer treatment in which tumor cells are destroyed by reactive oxygen species (ROS) produced by photosensitizers following its activation with visible or near infrared light. The PDT success is dependent on different factors namely on the efficiency of the photosensitizer deliver and targeting ability. In this review a special attention will be given to the role of some drug delivery systems to improve the efficiency of tetrapyrrolic photosensitizers to this type of treatment.

N-Confused Porphyrin Immobilized on Solid Supports: Synthesis and Metal Ions Sensing Efficacy.

In this work, the N-confused porphyrin 5,10,15,20-tetraphenyl-2-aza-21-carbaporphyrin (NCTPP) was immobilized on neutral or cationic supports based on silica and on Merrifield resin. The new materials were characterized by appropriate techniques (UV-Vis spectroscopy, SEM, and zeta potential analysis). Piezoelectric quartz crystal gold electrodes were coated with the different hybrids and their ability to interact with heavy metals was evaluated. The preliminary results obtained showed that the new materials can be explored for metal cations detection and the modification of the material surface is a key factor in tuning the metal selectivity.

Advances in photocatalytic degradation of organic pollutants in wastewaters: harnessing the power of phthalocyanines and phthalocyanine-containing materials.

Access to clean water is increasingly challenging worldwide due to human activities and climate change. Wastewater treatment and utilization offer a promising solution by reducing the reliance on pure underground water. However, it is crucial to develop efficient and sustainable methods for wastewater purification. Among the emerging wastewater treatment strategies, photocatalysis has gained significant attention for decomposing organic pollutants in water, especially when combined with sunlight and a recoverable photocatalyst. Heterogeneous photocatalysts have distinct advantages, as they can be recovered and reused without significant loss of activity over multiple cycles. Phthalocyanine dyes, with their exceptional photophysical properties, are particularly valuable for homogeneous and heterogeneous photocatalysis. By immobilizing these photosensitizers in various supports, hybrid materials extend their light absorption into the visible spectrum, complementing most supports' limited UV light absorption. The novelty and research importance of this review stems from its discussion of the multifaceted approach to treating contaminated wastewater with phthalocyanines and materials containing phthalocyanines. It highlights key aspects of each study, including photocatalytic efficiency, recyclability characteristics, investigation of the generation of oxygen species responsible for degradation, identification of the major degradation byproducts for each pollutant, and others. Moreover, the review includes tables that illustrate and compare the various phthalocyanines and supporting materials employed in each study for pollutant degradation. Additionally, almost all photocatalysts mentioned in this review could degrade at least 5% of the pollutant, and more than 50 photocatalysts showed photocatalytic rates above 50%. When immobilized in some support, the synergistic effect of the phthalocyanine was visible in the photocatalytic rate of the studied pollutant. However, when performing these types of works, it is necessary to understand the degradation products of each pollutant and their relative toxicities. Along with this, recyclability and stability studies are also necessary. Despite the good results presented in this review, some of the works lack those studies. Moreover, none of the works mentions any study in wastewater.

Photodynamic inactivation of pathogenic Gram-negative and Gram-positive bacteria mediated by Si(IV) phthalocyanines bearing axial ammonium units.

The photodynamic inactivation (PDI) of microorganisms has gained interest as an efficient option for conventional antibiotic treatments. Recently, Si(IV) phthalocyanines (SiPcs) have been highlighted as promising photosensitizers (PSs) to the PDI of microorganisms due to their remarkable absorption and emission features. To increase the potential of cationic SiPcs as PS drugs, one novel (1a) and two previously described (2a and 3a) axially substituted PSs with di-, tetra-, and hexa-ammonium units, respectively, were synthesized and characterized. Their PDI effect was evaluated for the first time against Escherichia coli and Staphylococcus aureus, a Gram-negative and a Gram-positive bacterium, respectively. The photodynamic treatments were conducted with PS concentrations of 3.0 and 6.0 µM under 60 min of white light irradiation (150 mW.cm-2). The biological results show high photodynamic efficiency for di- and tetra-cationic PSs 1a and 2a (6.0 µM), reducing the E. coli viability in 5.2 and 3.9 log, respectively (after 15 min of dark incubation before irradiation). For PS 3a, a similar bacterial reduction (3.6 log) was achieved but only with an extended dark incubation period (30 min). Under the same experimental conditions, the photodynamic effect of cationic PSs 1a-3a on S. aureus was even more promising, with abundance reductions of ca. 8.0 log after 45-60 min of PDI treatment. These results reveal the high PDI efficiency of PSs bearing ammonium groups and suggest their promising application as a broad-spectrum antimicrobial to control infections caused by Gram-negative and Gram-positive bacteria.

Tetracationic porphyrin derivatives against human breast cancer.

Photodynamic therapy (PDT) is an approved therapeutic approach and an alternative to conventional chemotherapy for the treatment of several types of cancer with the advantages of reducing the side effects and developing resistance mechanisms. Here, was evaluated the photosensitization capabilities of 5,10,15,20-tetrakis[4-(pyridinium-1-yl-methyl)phenyl]porphyrin (3), its N-confused isomer (4) and of the neutral precursors (1) and (2) and the results were compared with the ones obtained with the cationic 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin (TMPyP). Both regular porphyrin derivatives 1 and 3 showed higher efficiency to generate singlet oxygen than TMPyP. The PDT assays towards MCF-7 cells under red light irradiation (λ > 640 nm, 23.7 mW cm-2) demonstrated that the cationic porphyrin 3 is an efficient photosensitizer to kill MCF-7 breast cancer cells. The study of the cell death mechanisms induced by the photodynamic process showed that the studied porphyrin 3 and TMPyP caused cell death by autophagic flux and necrosis.

Photoinactivation of Escherichia coli with Water-Soluble Ammonium-Substituted Phthalocyanines.

Zinc(II) phthalocyanines (Pcs) peripherally decorated with 2,4,6-tris(dimethylaminomethyl)phenoxy groups (Pcs 1 and 3) and the corresponding quaternized derivatives (Pcs 2 and 4) were synthesized and their photodynamic inactivation (PDI) efficiency against recombinant bioluminescent Escherichia coli was examined. The photophysical data revealed that the presence of the ammonium units on the Pc structures promotes a redshift of the absorption bands when compared with the corresponding nonquaternized ones. The ammonium-substituted Pcs 2 and 4 showed excellent stability in dimethylformamide, moderate photostability, and increased efficiency to generate singlet oxygen (1O2). The water-soluble photosensitizers 2 and 4 at 5.0 µM exhibited a high photodynamic inactivation (PDI) efficiency against planktonic bioluminescent E. coli, reaching the detection limit of the methodology (a decrease of ∼4 log in the bioluminescence signal) after 210 min and 150 min under red light, delivered at a fluence rate of 135 mW·cm-2, respectively. Moreover, for the first time, it was accessed with the combined action of KI with ammonium-substituted Pcs. The addition of potassium iodide significantly improved the efficacy of Pc 2, which could reach the same inactivation rate after a short period of 5 min under the same irradiation conditions. The use of KI potentiates the PDI efficacy probably because of the generation of additional highly cytotoxic species during the photodynamic process which begins with the reaction of 1O2 with KI producing peroxyiodide species. The results of this work show that Pcs 2 and 4, with or without KI, can be considered as promising Pc dyes for the PDI of Gram-negative bacteria.

Unsymmetrical cationic porphyrin-cyclodextrin bioconjugates for photoinactivation of Escherichia coli.

Photodynamic inactivation (PDI) of microorganisms has been used for the treatment of bacterial infection. PDI is based on the combination of three non-toxic elements: a photosensitizer (PS), light and molecular oxygen, which lead to the formation of reactive oxygen species (ROS) that cause lethal oxidative damage into the target pathogenic bacteria. For that, clinical approved tetrapyrrolic macrocycles, with particular emphasis on photoactive porphyrin (Por) dyes, have been used as PS in PDI for different biomedical applications. Two novel unsymmetrical free-base thiopyridyl Pors conjugated with α- or γ-CD units (Pors 2 and 3) were prepared and the corresponding cationic ones (Pors 2a and 3a) were assessed as water-soluble photosensitizer (PS) agents by photophysical, photochemical and E. coli photobiological studies. The presence of the CD unit and the positive charges on the Por periphery (2a and 3a) enhance their solubility in aqueous media. The photoactivity of the two cationic Pors 2a and 3a ensures their potential as PDI drugs against Gram-negative bacteria model, a bioluminescent E. coli, which the best PDI efficiency was determined for Por 3a that achieved the highest bacterial reduction of 4.0 log10 (ANOVA, p < 0.0001), reaching the detection limit of the method after 15 min.