Integrating porphyrin-based nanoporous organic polymers with electrochemical aptasensors for ultratrace detection of kanamycin.

The synthesis and characterization of two new porphyrin-based porous organic polymers (POPs) via Sonogashira cross-coupling reaction and leverage the two obtained POPs is reported for the fabrication of electrochemical aptasensors to detect kanamycin at an ultratrace level. The resultant electrochemical aptasensor demonstrates a high linear relationship with the logarithmic value of kanamycin concentration in the range 5 × 10-5-5 µg/L with the limit of detection of 17.6 pg/L or 36.3 fM. During the analysis of real samples from milk and river, a relative standard deviation of less than 4.39%, and good recovery values in the range 97.0-105% were obtained.

Mechanochemical Access to Catechol-Derived Metal-Organic Frameworks.

Mechanochemistry, a resurging synthetic approach, has been developed into an effective and controllable method to access a family of crystalline porous catechol-derived metal-organic frameworks (MOFs) for the first time. We have identified that the obtained crystalline phase is readily tunable by precursors and the addition of solvents or drying agents. The described mechanochemistry allows us to synthesize these materials in a highly sustainable manner. Thus, mechanochemistry is expected to pave a promising avenue to access a broader class of MOF materials, in addition to those based on the motifs of carboxylic acid or imidazole.

Mechanochemistry of Group 4 Element-Based Metal-Organic Frameworks.

Mechanochemical synthesis is emerging as an environmentally friendly yet efficient approach to preparing metal-organic frameworks (MOFs). Herein, we report our systematic investigation on the mechanochemical syntheses of Group 4 element-based MOFs. The developed mechanochemistry allows us to synthesize a family of Hf4O4(OH)4(OOC)12-based MOFs. Integrating [Zr6O4(OH)4(OAc)12]2 and [Hf6O4(OH)4(OAc)12]2 under the mechanochemical conditions leads to a unique family of cluster-precise multimetallic MOFs that cannot be accessed by the conventional solvothermal synthesis. Extensive efforts have not yielded an effective pathway for preparing TiIV-derived MOFs, tentatively because of the relatively low Ti-O bond dissociation energy.

Atomically Precise Crystalline Materials Based on Kinetically Inert Metal Ions via Reticular Mechanopolymerization.

Atomistic control of the coordination environment of lattice ions and the distribution of metal sites within crystalline mixed-metal coordination polymers remain significant synthetic challenges. Herein is reported the mechanochemical synthesis of a reticular family of crystalline heterobimetallic metal-organic frameworks (MOFs) is now achieved by polymerization of molecular Ru2 [II,III] complexes, featuring unprotected carboxylic acid substituents, with Cu(OAc)2 . The resulting crystalline heterobimetallic MOFs are solid solutions of Ru2 and Cu2 sites housed within [M3 L2 ] phases. The developed mechanochemical strategy is modular and allows for systematic control of the primary coordination sphere of the Ru2 sites within an isoreticular family of materials. This strategy is anticipated to provide a rational approach to atomically precise mixed-metal materials.

Measuring and Modulating Substrate Confinement during Nitrogen-Atom Transfer in a Ru2-Based Metal-Organic Framework.

The porosity and synthetic tunability of metal-organic frameworks (MOFs) has motivated interest in application of these materials as designer heterogeneous catalysts. While understanding substrate mobility in these materials is critical to the rational development of highly active catalyst platforms, experimental data are rarely available. Here we demonstrate kinetic isotope effect (KIE) analysis enables direct evaluation of the extent of substrate confinement as a function of material mesoporosity. Further, we provide evidence that suggests substrate confinement within a microporous Ru2-based MOF gives rise to quantum tunneling during interstitial C-H amination. The reported data provide the first evidence for tunneling during interstitial MOF chemistry and illustrate an experimental strategy to evaluate the impact of material structure on substrate mobility in porous catalysts.

In Operando Analysis of Diffusion in Porous Metal-Organic Framework Catalysts.

The potential to exert atomistic control over the structure of site-isolated catalyst sites, as well as the topology and chemical environment of interstitial pore spaces, has inspired efforts to apply porous metal-organic frameworks (MOFs) as catalysts for fine chemical synthesis. In analogy to enzyme-catalyzed reactions, MOF catalysts have been proposed as platforms in which substrate confinement could be used to achieve chemo- and stereoselectivities that are orthogonal to solution-phase catalysts. In order to leverage the tunable pore topology of MOFs to impact catalyst selectivity, catalysis must proceed at interstitial catalyst sites, rather than at solvent-exposed interfacial sites. This Minireview addresses challenges inherent to interstitial MOF catalysis by 1) describing the diffusional processes available to sorbates in porous materials, 2) discussing critical factors that impact the diffusion rate of substrates in porous materials, and 3) presenting in operando experimental strategies to assess the relative rates of substrate diffusion and catalyst turnover in MOF catalysis. It is anticipated that the continued development of in operando tools to evaluate substrate diffusion in porous catalysts will advance the application of these materials in fine chemical synthesis.

Iodosylbenzene Coordination Chemistry Relevant to Metal-Organic Framework Catalysis.

Hypervalent iodine compounds formally feature expanded valence shells at iodine. These reagents are broadly used in synthetic chemistry due to the ability to participate in well-defined oxidation-reduction processes and because the ligand-exchange chemistry intrinsic to the hypervalent center allows hypervalent iodine compounds to be applied to a broad array of oxidative substrate functionalization reactions. We recently developed methods to generate these compounds from O2 that are predicated on diverting reactive intermediates of aldehyde autoxidation toward the oxidation of aryl iodides. Coupling the aerobic oxidation of aryl iodides with catalysts that effect C-H bond oxidation would provide a strategy to achieve aerobic C-H oxidation chemistry. In this Forum Article, we discuss the aspects of hypervalent iodine chemistry and bonding that render this class of reagents attractive lynchpins for aerobic oxidation chemistry. We then discuss the oxidation processes relevant to the aerobic preparation of 2-(tert-butylsulfonyl)iodosylbenzene, which is a popular hypervalent iodine reagent for use with porous metal-organic framework (MOF)-based catalysts because it displays significantly enhanced solubility as compared with unsubstituted iodosylbenzene. We demonstrate that popular synthetic methods to this reagent often provide material that displays unpredictable disproportionation behavior due to the presence of trace impurities. We provide a revised synthetic route that avoids impurities common in the reported methods and provides access to material that displays predictable stability. Finally, we describe the coordination chemistry of hypervalent iodine compounds with metal clusters relevant to MOF chemistry and discuss the potential implications of this coordination chemistry to catalysis in MOF scaffolds.

Probing Substrate Diffusion in Interstitial MOF Chemistry with Kinetic Isotope Effects.

Metal-organic frameworks (MOFs) have garnered substantial interest as platforms for site-isolated catalysis. Efficient diffusion of small-molecule substrates to interstitial lattice-confined catalyst sites is critical to leveraging unique opportunities of these materials as catalysts. Understanding the rates of substrate diffusion in MOFs is challenging, and few in situ chemical tools are available to evaluate substrate diffusion during interstitial MOF chemistry. Herein, we demonstrate nitrogen atom transfer (NAT) from a lattice-confined Ru2 nitride to toluene to generate benzylamine. We use the comparison of the intramolecular deuterium kinetic isotope effect (KIE), determined for amination of a partially deuterated substrate, with the intermolecular KIE, determined by competitive amination of a mixture of perdeuterated and undeuterated substrates, to establish the relative rates of substrate diffusion and interstitial chemistry. We anticipate that the developed KIE-based experiments will contribute to the development of porous materials for group-transfer catalysis.

Reversible Switching between Highly Porous and Nonporous Phases of an Interpenetrated Diamondoid Coordination Network That Exhibits Gate-Opening at Methane Storage Pressures.

Herein, we report that a new flexible coordination network, NiL2 (L=4-(4-pyridyl)-biphenyl-4-carboxylic acid), with diamondoid topology switches between non-porous (closed) and several porous (open) phases at specific CO2 and CH4 pressures. These phases are manifested by multi-step low-pressure isotherms for CO2 or a single-step high-pressure isotherm for CH4 . The potential methane working capacity of NiL2 approaches that of compressed natural gas but at much lower pressures. The guest-induced phase transitions of NiL2 were studied by single-crystal XRD, in situ variable pressure powder XRD, synchrotron powder XRD, pressure-gradient differential scanning calorimetry (P-DSC), and molecular modeling. The detailed structural information provides insight into the extreme flexibility of NiL2 . Specifically, the extended linker ligand, L, undergoes ligand contortion and interactions between interpenetrated networks or sorbate-sorbent interactions enable the observed switching.

Interpenetrating Metal-Metalloporphyrin Framework for Selective CO2 Uptake and Chemical Transformation of CO2.

Herein we report a robust primitive cubic (pcu)-topology metal-metalloporphyrin framework (MMPF), MMPF-18, which was constructed from a ubiquitous secondary building unit of a tetranuclear zinc cluster, Zn4(µ4-O)(-COO)6, and a linear organic linker of 5,15-bis(4-carboxyphenyl)porphyrin (H2bcpp). The strong π-π stacking from porphyrins and the lengthy H2bcpp ligand affords a 4-fold-interpenetrating network along with reduced void spaces and confined narrow channels. Thereby, MMPF-18 presents segmented pores and high-density metalloporphyrin centers for selective CO2 uptake over CH4 and size-selective chemical transformation of CO2 with epoxides forming cyclic carbonates under ambient conditions.

Inserting CO2 into Aryl C-H Bonds of Metal-Organic Frameworks: CO2 Utilization for Direct Heterogeneous C-H Activation.

Described for the first time is that carbon dioxide (CO2 ) can be successfully inserted into aryl C-H bonds of the backbone of a metal-organic framework (MOF) to generate free carboxylate groups, which serve as Brønsted acid sites for efficiently catalyzing the methanolysis of epoxides. The work delineates the very first example of utilizing CO2 for heterogeneous C-H activation and carboxylation reactions on MOFs, and opens a new avenue for CO2 chemical transformations under mild reaction conditions.

Theoretical Insights into the Tuning of Metal Binding Sites of Paddlewheels in rht-Metal-Organic Frameworks.

Theoretical investigations of CO2 sorption are performed in four members of the highly tunable rht-metal-organic framework (MOF) platform. rht-MOFs contain two Cu(2+) ions that comprise the metal paddlewheels and both are in chemically distinct environments. Indeed, one type of Cu(2+) ion faces toward the center of the linker whereas the other type faces away from the center of the linker. Electronic structure calculations on the series of rht-MOFs demonstrate that one of the Cu(2+) ions has a consistently higher charge magnitude relative to the other. As a consequence, the Cu(2+) ion with the higher partial positive charge acts as the favored sorbate binding site at initial loading as revealed by grand canonical Monte Carlo (GCMC) simulations that include many-body polarization. It was found that the charge distribution about the copper paddlewheels is dependent on the type of functional groups present on the linker. This study demonstrates how the binding site about the metal paddlewheels in the rht-MOF platform can be controlled by changing the functionality on the organic ligand.

Metal-metalloporphyrin frameworks: a resurging class of functional materials.

This review presents comprehensively recent progress in metal-metalloporphyrin frameworks (MMPFs) with an emphasis on versatile functionalities. Following a brief introduction of basic concepts and the potential virtues of MMPFs, we give a snapshot of the historical perspective of MMPFs since 1991. We then summarize four effective strategies implemented frequently to construct prototypal MMPFs. MMPFs represent a resurging class of promising functional materials, highlighted with diverse applications including guest-molecule adsorption and separation, catalysis, nano-thin films and light-harvesting.

Precise Molecular Fission and Fusion: Quantitative Self-Assembly and Chemistry of a Metallo-Cuboctahedron.

Inspiration for molecular design and construction can be derived from mathematically based structures. In the quest for new materials, the adaptation of new building blocks can lead to unexpected results. Towards these ends, the quantitative single-step self-assembly of a shape-persistent, Archimedean-based building block, which generates the largest molecular sphere (a cuboctahedron) that has been unequivocally characterized by synchrotron X-ray analysis, is described. The unique properties of this new construct give rise to a dilution-based transformation into two identical spheres (octahedra) each possessing one half of the molecular weight of the parent structure; concentration of this octahedron reconstitutes the original cuboctahedron. These chemical phenomena are reminiscent of biological fission and fusion processes. The large 6 nm cage structure was further analyzed by 1D and 2D NMR spectroscopy, mass spectrometry, and collision cross-section analysis. New routes to molecular encapsulation can be envisioned.

Crystal engineering of an nbo topology metal-organic framework for chemical fixation of CO2 under ambient conditions.

Crystal engineering of the nbo metal-organic framework (MOF) platform MOF-505 with a custom-designed azamacrocycle ligand (1,4,7,10-tetrazazcyclododecane-N,N',N'',N'''-tetra-p-methylbenzoic acid) leads to a high density of well-oriented Lewis active sites within the cuboctahedral cage in MMCF-2, [Cu2(Cu-tactmb)(H2O)3(NO3)2]. This MOF demonstrates high catalytic activity for the chemical fixation of CO2 into cyclic carbonates at room temperature under 1 atm pressure.

Facile mechanochemical synthesis of MIL-53 and its isoreticular analogues with a glance at reaction reversibility.

MIL-53 represents one of the most notable metal-organic frameworks given its unique structural flexibility and remarkable thermal stability. In this study, a shaker-type ball milling method has been developed into a facile and generalizable synthetic strategy to access a family of MIL-53 type materials under ambient conditions. During the explorations of [M(OH)(fumarate)] (M = Al, Ga, and In), we report a positive correlation between the metal-ligand (M-L) bond reversibility and the size of resultant crystallites under the mechanochemical process. The more kinetically labile the M-L bond is, the larger the afforded crystallite size is.

Generic and facile mechanochemical access to versatile lattice-confined Pd(ii)-based heterometallic sites.

Metal-organic frameworks (MOFs) show remarkable potential in a broad array of applications given their physical and chemical versatility. Classical synthesis of MOFs is performed using solution chemistry at elevated temperatures to achieve reversible metal-ligand bond formation. These harsh conditions may not be suitable for chemical species sensitive to high temperature or prone to deleterious reactions with solvents. For instance, Pd(ii) is susceptible to reduction under solvothermal conditions and is not a common metal node of MOFs. We report a generic and facile mechanochemical strategy that directly incorporates a series of Pd(ii)-based heterobimetallic clusters into MOFs as metal nodes without Pd(ii) being reduced to Pd(0). Mechanochemistry features advantages of short reaction time, minimum solvent, high reaction yield, and high degree of synthetic control. Catalytic performances of lattice-confined heterobimetallic sites are examined for nitrene transfer reactions and we demonstrate that the chemoselectivity for allylic amination versus olefin aziridination is readily tuned by the identity of the first-row metal ion in Pd(ii)-based heterobimetallic clusters.

Bifunctional Metal-Organic Nanoballs Featuring Lewis Acidic and Basic Sites as a New Platform for One-Pot Tandem Catalysis.

The design and synthesis of polyhedra using coordination-driven self-assembly has been an intriguing research area for synthetic chemists. Metal-organic polyhedra are a class of intricate molecular architectures that have garnered significant attention in the literature due to their diverse structures and potential applications. Hereby, we report Cu-MOP, a bifunctional metal-organic cuboctahedra built using 2,6-dimethylpyridine-3,5-dicarboxylic acid and copper acetate at room temperature. The presence of both Lewis basic pyridine groups and Lewis acidic copper sites imparts catalytic activity to Cu-MOP for the tandem one-pot deacetalization-Knoevenagel/Henry reactions. The effect of solvent system and time duration on the yields of the reactions was studied, and the results illustrate the promising potential of these metal-organic cuboctahedra, also known as nanoballs for applications in catalysis.

Tunability of band gaps in metal-organic frameworks.

The tunability of the band gaps in Zn-based metal-organic frameworks (MOFs) has been experimentally demonstrated via two different approaches: changing the cluster size of the secondary building unit (SBU) or alternating the conjugation of the organic linker.

Porous double-walled metal triazolate framework based upon a bifunctional ligand and a pentanuclear zinc cluster exhibiting selective CO2 uptake.

The self-assembly of a custom-designed bifunctional ligand featuring both 1,2,3-triazolate and carboxylate donor groups with a pentanuclear zinc cluster generated in situ affords a double-walled metal triazolate framework (MTAF) material, MTAF-1 (Zn(5)(µ(3)-O)(2)(C(9)N(3)H(5)O(2))(5)(H(+))(4)(H(2)O)(17)(C(3)H(7)NO)(10)), which exhibits a surface area of 2300 m(2)/g and demonstrates interesting selective CO(2) uptake performances.