Deep Learning-based Prediction of Percutaneous Recanalization in Chronic Total Occlusion Using Coronary CT Angiography.

Background CT is helpful in guiding the revascularization of chronic total occlusion (CTO), but manual prediction scores of percutaneous coronary intervention (PCI) success have challenges. Deep learning (DL) is expected to predict success of PCI for CTO lesions more efficiently. Purpose To develop a DL model to predict guidewire crossing and PCI outcomes for CTO using coronary CT angiography (CCTA) and evaluate its performance compared with manual prediction scores. MATERIALS AND METHODS: Participants with CTO lesions were prospectively identified from one tertiary hospital between January 2018 and December 2021 as the training set to develop the DL prediction model for PCI of CTO, with fivefold cross validation. The algorithm was tested using an external test set prospectively enrolled from three tertiary hospitals between January 2021 and June 2022 with the same eligibility criteria. All participants underwent preprocedural CCTA within 1 month before PCI. The end points were guidewire crossing within 30 minutes and PCI success of CTO.Results A total of 534 participants (mean age, 57.7 years ± 10.8 [SD]; 417 [78.1%] men) with 565 CTO lesions were included. In the external test set (186 participants with 189 CTOs), the DL model saved 85.0% of the reconstruction and analysis time of manual scores (mean, 73.7 seconds vs 418.2-466.9 seconds) and had higher accuracy than manual scores in predicting guidewire crossing within 30 minutes (DL, 91.0%; CT Registry of Chronic Total Occlusion Revascularization, 61.9%; Korean Multicenter CTO CT Registry [KCCT], 68.3%; CCTA-derived Multicenter CTO Registry of Japan (J-CTO), 68.8%; P < .05) and PCI success (DL, 93.7%; KCCT, 74.6%; J-CTO, 75.1%; P < .05). For DL, the area under the receiver operating characteristic curve was 0.97 (95% CI: 0.89, 0.99) for the training test set and 0.96 (95% CI: 0.90, 0.98) for the external test set. Conclusion The DL prediction model accurately predicted the percutaneous recanalization outcomes of CTO lesions and increased the efficiency of noninvasively grading the difficulty of PCI. © RSNA, 2023 Supplemental material is available for this article. See also the editorial by Pundziute-do Prado in this issue.

Simultaneous left atrium anatomy and scar segmentations via deep learning in multiview information with attention.

Three-dimensional late gadolinium enhanced (LGE) cardiac MR (CMR) of left atrial scar in patients with atrial fibrillation (AF) has recently emerged as a promising technique to stratify patients, to guide ablation therapy and to predict treatment success. This requires a segmentation of the high intensity scar tissue and also a segmentation of the left atrium (LA) anatomy, the latter usually being derived from a separate bright-blood acquisition. Performing both segmentations automatically from a single 3D LGE CMR acquisition would eliminate the need for an additional acquisition and avoid subsequent registration issues. In this paper, we propose a joint segmentation method based on multiview two-task (MVTT) recursive attention model working directly on 3D LGE CMR images to segment the LA (and proximal pulmonary veins) and to delineate the scar on the same dataset. Using our MVTT recursive attention model, both the LA anatomy and scar can be segmented accurately (mean Dice score of 93% for the LA anatomy and 87% for the scar segmentations) and efficiently ( ∼ 0.27 s to simultaneously segment the LA anatomy and scars directly from the 3D LGE CMR dataset with 60-68 2D slices). Compared to conventional unsupervised learning and other state-of-the-art deep learning based methods, the proposed MVTT model achieved excellent results, leading to an automatic generation of a patient-specific anatomical model combined with scar segmentation for patients in AF.

Deep Learning for Diagnosis of Chronic Myocardial Infarction on Nonenhanced Cardiac Cine MRI.

Background Renal impairment is common in patients with coronary artery disease and, if severe, late gadolinium enhancement (LGE) imaging for myocardial infarction (MI) evaluation cannot be performed. Purpose To develop a fully automatic framework for chronic MI delineation via deep learning on non-contrast material-enhanced cardiac cine MRI. Materials and Methods In this retrospective single-center study, a deep learning model was developed to extract motion features from the left ventricle and delineate MI regions on nonenhanced cardiac cine MRI collected between October 2015 and March 2017. Patients with chronic MI, as well as healthy control patients, had both nonenhanced cardiac cine (25 phases per cardiac cycle) and LGE MRI examinations. Eighty percent of MRI examinations were used for the training data set and 20% for the independent testing data set. Chronic MI regions on LGE MRI were defined as ground truth. Diagnostic performance was assessed by analysis of the area under the receiver operating characteristic curve (AUC). MI area and MI area percentage from nonenhanced cardiac cine and LGE MRI were compared by using the Pearson correlation, paired t test, and Bland-Altman analysis. Results Study participants included 212 patients with chronic MI (men, 171; age, 57.2 years ± 12.5) and 87 healthy control patients (men, 42; age, 43.3 years ± 15.5). Using the full cardiac cine MRI, the per-segment sensitivity and specificity for detecting chronic MI in the independent test set was 89.8% and 99.1%, respectively, with an AUC of 0.94. There were no differences between nonenhanced cardiac cine and LGE MRI analyses in number of MI segments (114 vs 127, respectively; P = .38), per-patient MI area (6.2 cm2 ± 2.8 vs 5.5 cm2 ± 2.3, respectively; P = .27; correlation coefficient, r = 0.88), and MI area percentage (21.5% ± 17.3 vs 18.5% ± 15.4; P = .17; correlation coefficient, r = 0.89). Conclusion The proposed deep learning framework on nonenhanced cardiac cine MRI enables the confirmation (presence), detection (position), and delineation (transmurality and size) of chronic myocardial infarction. However, future larger-scale multicenter studies are required for a full validation. Published under a CC BY 4.0 license. Online supplemental material is available for this article. See also the editorial by Leiner in this issue.

Evaluation of fractional flow reserve in patients with stable angina: can CT compete with angiography?

BACKGROUND: We aimed to compare the performance of FFRCT and FFRQCA in assessing the functional significance of coronary artery stenosis in patients suffering from coronary artery disease with stable angina. METHOD: A total of 101 stable coronary heart disease (CAD) patients with 181 lesions were recruited. FFRCT and FFRQCA were compared using invasive fractional flow reserve (FFR) as a reference standard. Comparisons between FFRCT and FFRQCA were conducted based on strategies of the geometric reconstruction, boundary conditions, and geometric characteristics. The performance of FFRCT and FFRQCA in detecting hemodynamic significance was also investigated. RESULTS: The performance of FFRCT and FFRQCA in discriminating hemodynamically significant lesions was compared. Good correlation and agreement with invasive FFR was found using FFRCT and FFRQCA (r = 0.809, p < 0.001 and r = 0.755, p < 0.001). A significant difference was observed in the complex coronary artery tree, in which relatively better prediction was observed using FFRCT than FFRQCA when analyzing the stenosis distributed in the middle segment of a stenotic branch (p = 0.036). Moreover, FFRCT was found to be better at predicting hemodynamically insignificant stenosis than FFRQCA (p = 0.007), while the performance of the two parameters was similar in discriminating functional significant lesions using an FFR threshold of ≤ 0.8 as a reference standard. CONCLUSION: FFRCT and FFRQCA could both accurately rule out functional insignificant lesions in stable CAD patients. FFRCT was found to be better for the noninvasive screening of CAD patients with stable angina than FFRQCA. KEY POINTS: • FFR CT and FFR QCA were both in good correlation and agreement with invasive FFR measurements. • FFR CT is superior in accuracy and consistency compared to FFR QCA in patients with stenoses distributed in left coronary artery. • The noninvasive nature of FFR CT could provide potential benefit for stable CAD patients on disease management.

Hemodynamics analysis of the serial stenotic coronary arteries.

Coronary arterial stenoses, particularly serial stenoses in a single branch, are responsible for complex hemodynamic properties of the coronary arterial trees, and the uncertain prognosis of invasive intervention. Critical information of the blood flow redistribution in the stenotic arterial segments is required for the adequate treatment planning. Therefore, in this study, an image based non-invasive functional assessment is performed to investigate the hemodynamic significances of serial stenoses. Twenty patient-specific coronary arterial trees with different combinations of stenoses were reconstructed from the computer tomography angiography for the evaluation of the hemodynamics. Our results showed that the computed FFR based on CTA images (FFRCT) pullback curves with wall shear stress (WSS) distribution could provide more effectively examine the physiological significance of the locations of the segmental narrowing and the curvature of the coronary arterial segments. The paper thus provides the diagnostic efficacy of FFRCT pullback curve for noninvasive quantification of the hemodynamics of stenotic coronary arteries with serial lesions, compared to the gold standard invasive FFR, to provide a reliable physiological assessment of significant amount of coronary artery stenosis. Further, we were also able to demonstrate the potential of carrying out virtual revascularization, to enable more precise PCI procedures and improve their outcomes.

Functional assessment of the stenotic carotid artery by CFD-based pressure gradient evaluation.

The functional assessment of a hemodynamic significant stenosis base on blood pressure variation has been applied for evaluation of the myocardial ischemic event. This functional assessment shows great potential for improving the accuracy of the classification of the severity of carotid stenosis. To explore the value of grading the stenosis using a pressure gradient (PG)-we had reconstructed patient-specific carotid geometries based on MRI images-computational fluid dynamics were performed to analyze the PG in their stenotic arteries. Doppler ultrasound image data and the corresponding MRI image data of 19 patients with carotid stenosis were collected. Based on these, 31 stenotic carotid arterial geometries were reconstructed. A combinatorial boundary condition method was implemented for steady-state computer fluid dynamics simulations. Anatomic parameters, including tortuosity (T), the angle of bifurcation, and the cross-sectional area of the remaining lumen, were collected to investigate the effect on the pressure distribution. The PG is highly correlated with the severe stenosis (r = 0.902), whereas generally, the T and the angle of the bifurcation negatively correlate to the pressure drop of the internal carotid artery stenosis. The calculation required <10 min/case, which made it prepared for the fast diagnosis of the severe stenosis. According to the results, we had proposed a potential threshold value for distinguishing severe stenosis from mild-moderate stenosis (PG = 0.88). In conclusion, the PG could serve as the additional factor for improving the accuracy of grading the severity of the stenosis.

Quantification of three-dimensional computed tomography angiography for evaluating coronary luminal stenosis using digital subtraction angiography as the standard of reference.

OBJECTIVE: We sought to evaluate the accuracy of quantitative three-dimensional (3D) CT angiography (CTA) for the assessment of coronary luminal stenosis using digital subtraction angiography (DSA) as the standard of reference. METHOD: Twenty-three patients with 54 lesions were referred for CTA followed by DSA. The CTA scans were performed with 256-slice spiral CT. 3D CTA were reconstructed from two-dimensional CTA imaging sequences in order to extract the following quantitative indices: minimal lumen diameter, percent diameter stenosis (%DS), minimal lumen area, and percent area stenosis (%AS). Correlation and limits of agreement were calculated using Pearson correlation and Bland-Altman analysis, respectively. The diagnostic performance and the diagnostic concordance of 3D CTA-derived anatomic parameters (%DS, %AS) for the detection of severe coronary arterial stenosis (as assessed by DSA) were presented as sensitivity, specificity, diagnostic accuracy, and Kappa statistics. Of which vessels with %DS >50% or with %AS >75% were identified as severe coronary arterial lesions. RESULT: The correlations of the anatomic parameters between 3D CTA and DSA were significant (r = 0.51-0.74, P < 0.001). Bland-Altman analysis confirmed that the mean differences were small (from -1.11 to 27.39%), whereas the limits of agreement were relatively wide (from ±28.07 to ±138.64%). Otherwise, the diagnostic accuracy (74.1% with 58.3% sensitivity and 86.7% specificity for DS%; 74.1% with 45.8% sensitivity and 96.7% specificity for %AS) and the diagnostic concordance (k = 0.46 for DS%; 0.45 for %AS) of 3D CTA-derived anatomic parameters for the detection of severe stenosis were moderate. CONCLUSION: 3D advanced imaging reconstruction technique is a helpful tool to promote the use of CTA as an alternative to assess luminal stenosis in clinical practice.

[AOTF-Based Imaging Spectrometer and Its Applications in the Identification of Metameric Targets].

For obtaining spectrum information and space distribution information of metameric targets at the same time, an AOTF-based imaging spectrometer was developed, which consists of a front imaging lens assembly, an AOTF filter imaging module, an AOTF driver, a plane array CCD, an image acquisition card and a PC. Under the control of the PC, a spectral image cube can be obtained by a fast wavelength scanning process, thereby the spectrum information of any point on the image is available. The developed imaging spectrometer, with a spectral range from 550-1,000 nm and a spectral resolution of 2.6 nm (@ 632 nm), and a less than 80 s switch time between any two wavelengths, has the characteristics of no mechanical moving part, low power dissipation and strong vibration resistance. The identification test of true and false roses and the information recovery experiment of altered physical evidence were carried out, The true and false roses were identified and the altered physical evidence was recovered, The experimental results showed that the imaging spectrometer has an excellent ability of identifying metameric targets, indicating a good application prospect.

[Development of a portable mid-infrared rapid analyzer for oil concentration in water based on MEMS linear sensor array].

Aiming at the existing problems such as weak environmental adaptability, low analytic efficiency and poor measuring repeatability in the traditional spectral oil analyzers, the present paper designed a portable mid-infrared rapid analyzer for oil concentration in water. To reduce the volume of the instrument, the non-symmetrical folding M-type Czerny-Turner optical structure was adopted in the core optical path. With a periodically rotating chopper, controlled by digital PID algorithm, applied for infrared light modulation, the modulating accuracy reached ±0.5%. Different from traditional grating-scanning spectrophotometers, this instrument used a fixed grating for light dispersion and avoided rotating error in the course of the measuring procedures. A new-type MEMS infrared linear sensor array was applied for modulated spectral signals detection, which improved the measuring efficiency remarkably. Optical simulation and experimental results indicate that the spectral range is 2 800 - 3 200 cm(-1), the spectral resolution is 6 cm(-1) (@3 130 cm(-1)), and the signal to noise ratio is up to 5 200 : 1. The acquisition time is 13 milliseconds per spectrogram, and the standard deviation of absorbance is less than 3 x 10(-3). These performances meet the standards of oil concentration measurements perfectly. Compared with traditional infrared spectral analyzers for oil concentration, the instrument demonstrated in this paper has many advantages such as smaller size, more efficiency, higher precision, and stronger vibration & moisture isolation. In addition, the proposed instrument is especially suitable for the environmental monitoring departments to implement real-time measurements in the field for oil concentration in water, hence it has broad prospects of application in the field of water quality monitoring.

A Deformable Constraint Transport Network for Optimal Aortic Segmentation From CT Images.

Aortic segmentation from computed tomography (CT) is crucial for facilitating aortic intervention, as it enables clinicians to visualize aortic anatomy for diagnosis and measurement. However, aortic segmentation faces the challenge of variable geometry in space, as the geometric diversity of different diseases and the geometric transformations that occur between raw and measured images. Existing constraint-based methods can potentially solve the challenge, but they are hindered by two key issues: inaccurate definition of properties and inappropriate topology of transformation in space. In this paper, we propose a deformable constraint transport network (DCTN). The DCTN adaptively extracts aortic features to define intra-image constrained properties and guides topological implementation in space to constrain inter-image geometric transformation between raw and curved planar reformation (CPR) images. The DCTN contains a deformable attention extractor, a geometry-aware decoder and an optimal transport guider. The extractor generates variable patches that preserve semantic integrity and long-range dependency in long-sequence images. The decoder enhances the perception of geometric texture and semantic features, particularly for low-intensity aortic coarctation and false lumen, which removes background interference. The guider explores the geometric discrepancies between raw and CPR images, constructs probability distributions of discrepancies, and matches them with inter-image transformation to guide geometric topology in space. Experimental studies on 267 aortic subjects and four public datasets show the superiority of our DCTN over 23 methods. The results demonstrate DCTN's advantages in aortic segmentation for different types of aortic disease, for different aortic segments, and in the measurement of clinical indexes.

Embedding Tasks Into the Latent Space: Cross-Space Consistency for Multi-Dimensional Analysis in Echocardiography.

Multi-dimensional analysis in echocardiography has attracted attention due to its potential for clinical indices quantification and computer-aided diagnosis. It can utilize various information to provide the estimation of multiple cardiac indices. However, it still has the challenge of inter-task conflict. This is owing to regional confusion, global abnormalities, and time-accumulated errors. Task mapping methods have the potential to address inter-task conflict. However, they may overlook the inherent differences between tasks, especially for multi-level tasks (e.g., pixel-level, image-level, and sequence-level tasks). This may lead to inappropriate local and spurious task constraints. We propose cross-space consistency (CSC) to overcome the challenge. The CSC embeds multi-level tasks to the same-level to reduce inherent task differences. This allows multi-level task features to be consistent in a unified latent space. The latent space extracts task-common features and constrains the distance in these features. This constrains the task weight region that satisfies multiple task conditions. Extensive experiments compare the CSC with fifteen state-of-the-art echocardiographic analysis methods on five datasets (10,908 patients). The result shows that the CSC can provide left ventricular (LV) segmentation, (DSC = 0.932), keypoint detection (MAE = 3.06mm), and keyframe identification (accuracy = 0.943). These results demonstrate that our method can provide a multi-dimensional analysis of cardiac function and is robust in large-scale datasets.

Iterative Residual Optimization Network for Limited-Angle Tomographic Reconstruction.

Limited-angle tomographic reconstruction is one of the typical ill-posed inverse problems, leading to edge divergence with degraded image quality. Recently, deep learning has been introduced into image reconstruction and achieved great results. However, existing deep reconstruction methods have not fully explored data consistency, resulting in poor performance. In addition, deep reconstruction methods are still mathematically inexplicable and unstable. In this work, we propose an iterative residual optimization network (IRON) for limited-angle tomographic reconstruction. First, a new optimization objective function is established to overcome false negative and positive artifacts induced by limited-angle measurements. We integrate neural network priors as a regularizer to explore deep features within residual data. Furthermore, the block-coordinate descent is employed to achieve a novel iterative framework. Second, a convolution assisted transformer is carefully elaborated to capture both local and long-range pixel interactions simultaneously. Regarding the visual transformer, the multi-head attention is further redesigned to reduce computational costs and protect reconstructed image features. Third, based on the relative error convergence property of the convolution assisted transformer, a mathematical convergence analysis is also provided for our IRON. Both numerically simulated and clinically collected real cardiac datasets are employed to validate the effectiveness and advantages of the proposed IRON. The results show that IRON outperforms other state-of-the-art methods.

Constraint-Aware Learning for Fractional Flow Reserve Pullback Curve Estimation from Invasive Coronary Imaging.

Estimation of the fractional flow reserve (FFR) pullback curve from invasive coronary imaging is important for the intraoperative guidance of coronary intervention. Machine/deep learning has been proven effective in FFR pullback curve estimation. However, the existing methods suffer from inadequate incorporation of intrinsic geometry associations and physics knowledge. In this paper, we propose a constraint-aware learning framework to improve the estimation of the FFR pullback curve from invasive coronary imaging. It incorporates both geometrical and physical constraints to approximate the relationships between the geometric structure and FFR values along the coronary artery centerline. Our method also leverages the power of synthetic data in model training to reduce the collection costs of clinical data. Moreover, to bridge the domain gap between synthetic and real data distributions when testing on real-world imaging data, we also employ a diffusion-driven test-time data adaptation method that preserves the knowledge learned in synthetic data. Specifically, this method learns a diffusion model of the synthetic data distribution and then projects real data to the synthetic data distribution at test time. Extensive experimental studies on a synthetic dataset and a real-world dataset of 382 patients covering three imaging modalities have shown the better performance of our method for FFR estimation of stenotic coronary arteries, compared with other machine/deep learning-based FFR estimation models and computational fluid dynamics-based model. The results also provide high agreement and correlation between the FFR predictions of our method and the invasively measured FFR values. The plausibility of FFR predictions along the coronary artery centerline is also validated.

Frequency-Enhanced Geometric-Constrained Reconstruction for Localizing Myocardial Infarction in 12-Lead Electrocardiograms.

Determining the location of myocardial infarction is crucial for clinical management and therapeutic stratagem. However, existing diagnostic tools either sacrifice ease of use or are limited by their spatial resolution. Addressing this, we aim to refine myocardial infarction localization via surface potential reconstruction of the ventricles in 12-lead electrocardiograms (ECG). A notable obstacle is the ill-posed nature of such reconstructions. To overcome this, we introduce the frequency-enhanced geometric-constrained iterative network (FGIN). FGIN begins by mining the latent features from ECG data across both time and frequency domains. Subsequently, it increases the data dimensionality of ECG and captures intricate features using convolutional layers. Finally, FGIN incorporates ventricular geometry as a constraint on surface potential distribution. It allocates variable weights to distinct edges. Experimental validation of FGIN confirms its efficacy over synthetic and clinical datasets. On the synthetic dataset, FGIN outperforms seven existing reconstruction methods, attaining the highest Pearson Correlation Coefficient of 0.8624, the lowest Root Mean Square Error of 0.1548, and the highest Structural Similarity Index Measure of 0.7988. On the clinical public dataset (2007 PhysioNet/Computers in Cardiology Challenge), FGIN achieves better localization results than other approaches, according to the clinical standard 17-segment model, achieving an average Segment Overlap of 87.2%. Clinical trials on 50 patients demonstrate FGIN's effectiveness, showing an average accuracy of 91.6% and an average Segment Overlap of 88.2%.

Non-invasive Assessment of Coronary Microvascular Dysfunction Using Vascular Deformation-Based Flow Estimation.

OBJECTIVE: Non-invasive computation of the index of microcirculatory resistance from coronary computed tomography angiography (CTA), referred to as IMR[Formula: see text], is a promising approach for quantitative assessment of coronary microvascular dysfunction (CMD). However, the computation of IMR[Formula: see text] remains an important unresolved problem due to its high requirement for the accuracy of coronary blood flow. Existing CTA-based methods for estimating coronary blood flow rely on physiological assumption models to indirectly identify, which leads to inadequate personalization of total and vessel-specific flow. METHODS: To overcome this challenge, we propose a vascular deformation-based flow estimation (VDFE) model to directly estimate coronary blood flow for reliable IMR[Formula: see text] computation. Specifically, we extract the vascular deformation of each vascular segment from multi-phase CTA. The concept of inverse problem solving is applied to implicitly derive coronary blood flow based on the physical constraint relationship between blood flow and vascular deformation. The vascular deformation constraints imposed on each segment within the vascular structure ensure sufficient individualization of coronary blood flow. RESULTS: Experimental studies on 106 vessels collected from 89 subjects demonstrate the validity of our VDFE, achieving an IMR[Formula: see text] accuracy of 82.08 %. The coronary blood flow estimated by VDFE has better reliability than the other four existing methods. CONCLUSION: Our proposed VDFE is an effective approach to non-invasively compute IMR[Formula: see text] with excellent diagnostic performance. SIGNIFICANCE: The VDFE has the potential to serve as a safe, effective, and cost-effective clinical tool for guiding CMD clinical treatment and assessing prognosis.

Distraction-aware hierarchical learning for vascular structure segmentation in intravascular ultrasound images.

Vascular structure segmentation in intravascular ultrasound (IVUS) images plays an important role in pre-procedural evaluation of percutaneous coronary intervention (PCI). However, vascular structure segmentation in IVUS images has the challenge of structure-dependent distractions. Structure-dependent distractions are categorized into two cases, structural intrinsic distractions and inter-structural distractions. Traditional machine learning methods often rely solely on low-level features, overlooking high-level features. This way limits the generalization of these methods. The existing semantic segmentation methods integrate low-level and high-level features to enhance generalization performance. But these methods also introduce additional interference, which is harmful to solving structural intrinsic distractions. Distraction cue methods attempt to address structural intrinsic distractions by removing interference from the features through a unique decoder. However, they tend to overlook the problem of inter-structural distractions. In this paper, we propose distraction-aware hierarchical learning (DHL) for vascular structure segmentation in IVUS images. Inspired by distraction cue methods for removing interference in a decoder, the DHL is designed as a hierarchical decoder that gradually removes structure-dependent distractions. The DHL includes global perception process, distraction perception process and structural perception process. The global perception process and distraction perception process remove structural intrinsic distractions then the structural perception process removes inter-structural distractions. In the global perception process, the DHL searches for the coarse structural region of the vascular structures on the slice of IVUS sequence. In the distraction perception process, the DHL progressively refines the coarse structural region of the vascular structures to remove structural distractions. In the structural perception process, the DHL detects regions of inter-structural distractions in fused structure features then separates them. Extensive experiments on 361 subjects show that the DHL is effective (e.g., the average Dice is greater than 0.95), and superior to ten state-of-the-art IVUS vascular structure segmentation methods.

A coronary CT angiography-derived myocardial radiomics model for predicting adverse outcomes in chronic myocardial infarction.

BACKGROUND: The prognostic efficacy of a coronary computed tomography angiography (CCTA)-derived myocardial radiomics model in patients with chronic myocardial infarction (MI) is unclear. METHODS: In this retrospective study, a cohort of 236 patients with chronic MI who underwent both CCTA and cardiac magnetic resonance (CMR) examinations within 30 days were enrolled and randomly divided into training and testing datasets at a ratio of 7:3. The clinical endpoints were major adverse cardiovascular events (MACE), defined as all-cause death, myocardial reinfarction and heart failure hospitalization. The entire three-dimensional left ventricular myocardium on CCTA images was segmented as the volume of interest for the extraction of radiomics features. Five models, namely the clinical model, CMR model, clinical+CMR model, CCTA-radiomics model, and clinical+CCTA-radiomics model, were constructed using multivariate Cox regression. The prognostic performances of these models were evaluated through receiver operating characteristic curve analysis and the index of concordance (C-index). RESULTS: Fifty-one (20.16%) patients experienced MACE during a median follow-up of 1439.5 days. The predictive performance of the CCTA-radiomics model surpassed that of the clinical model, CMR model, and clinical+CMR model in both the training (area under the curve (AUC) of 0.904 vs. 0.691, 0.764, 0.785; C-index of 0.88 vs. 0.71, 0.75, 0.76, all p values <0.001) and testing (AUC of 0.893 vs. 0.704, 0.851, 0.888; C-index of 0.86 vs. 0.73, 0.85, 0.85, all p values <0.05) datasets. CONCLUSIONS: The CCTA-based myocardial radiomics model is a valuable tool for predicting adverse outcomes in chronic MI, providing incremental value to conventional clinical and CMR parameters.

Quantification of functional hemodynamics in aortic valve disease using cardiac computed tomography angiography.

BACKGROUND AND OBJECTIVE: Cardiac computed tomography angiography (CTA) is the preferred modality for preoperative planning in aortic valve stenosis. However, it cannot provide essential functional hemodynamic data, specifically the mean transvalvular pressure gradient (MPG). This study aims to introduce a computational fluid dynamics (CFD) approach for MPG quantification using cardiac CTA, enhancing its diagnostic value. METHODS: Twenty patients underwent echocardiography, cardiac CTA, and invasive catheterization for pressure measurements. Cardiac CTA employed retrospective electrocardiographic gating to capture multi-phase data throughout the cardiac cycle. We segmented the region of interest based on mid-systolic phase cardiac CTA images. Then, we computed the average flow velocity into the aorta as the inlet boundary condition, using variations in end-diastolic and end-systolic left ventricular volume. Finally, we conducted CFD simulations using a steady-state model to obtain pressure distribution within the computational domain, allowing for the derivation of MPG. RESULTS: The mean value of MPG, measured via invasive catheterization (MPGInv), echocardiography (MPGEcho), and cardiac CTA (MPGCT), were 51.3 ± 28.4 mmHg, 44.8 ± 19.5 mmHg, and 55.8 ± 25.6 mmHg, respectively. In comparison to MPGInv, MPGCT exhibited a higher correlation of 0.91, surpassing that of MPGEcho, which was 0.82. Moreover, the limits of agreement for MPGCT ranged from -27.7 to 18.7, outperforming MPGEcho, which ranged from -40.1 to 18.0. CONCLUSIONS: The proposed method based on cardiac CTA enables the evaluation of MPG for aortic valve stenosis patients. In future clinical practice, a single cardiac CTA examination can comprehensively assess both the anatomical and functional hemodynamic aspects of aortic valve disease.

Cellular nucleus image-based smarter microscope system for single cell analysis.

Cell imaging technology is undoubtedly a powerful tool for studying single-cell heterogeneity due to its non-invasive and visual advantages. It covers microscope hardware, software, and image analysis techniques, which are hindered by low throughput owing to abundant hands-on time and expertise. Herein, a cellular nucleus image-based smarter microscope system for single-cell analysis is reported to achieve high-throughput analysis and high-content detection of cells. By combining the hardware of an automatic fluorescence microscope and multi-object recognition/acquisition software, we have achieved more advanced process automation with the assistance of Robotic Process Automation (RPA), which realizes a high-throughput collection of single-cell images. Automated acquisition of single-cell images has benefits beyond ease and throughout and can lead to uniform standard and higher quality images. We further constructed a single-cell image database-based convolutional neural network (Efficient Convolutional Neural Network, E-CNN) exceeding 20618 single-cell nucleus images. Computational analysis of large and complex data sets enhances the content and efficiency of single-cell analysis with the assistance of Artificial Intelligence (AI), which breaks through the super-resolution microscope's hardware limitation, such as specialized light sources with specific wavelengths, advanced optical components, and high-performance graphics cards. Our system can identify single-cell nucleus images that cannot be artificially distinguished with an accuracy of 95.3%. Overall, we build an ordinary microscope into a high-throughput analysis and high-content smarter microscope system, making it a candidate tool for Imaging cytology.

[Design of a compact structure interferometer].

A novel interferometer system based on the combinations of cube-corner reflectors and fixed plane mirrors was designed, the moving mirror drive system was designed and analysed, and its governor PID algorithm was used to ensure that the movement of the moving mirror is collimated, uniform and smooth. The parameters of the optical system of the interferometer and the optical devices were described. Finally, after validation of the experiment, it was indicated that the wave number accuracy, resolution, signal to noise ratio and other key indicators can meet the needs of practical application.