RESUMO
The purpose of the present study was to assay the in vitro and in vivo anthelmintic activity (AA) of Caesalpinia coriaria (Cc) mature fruits against the nematode Haemonchus contortus (Hc). The Hc infective larvae were used to assess the in vitro AA through larval mortality assay. The exposure of larvae to the different treatments was performed in 96-well microtitration plates. The treatments were as follows: hydroalcoholic extract (HA-E, at 25-100 mg/mL), aqueous fraction (Aq-F, at 12.5-50 mg/mL), organic fraction (EtOAc-F at 12.5-50 mg/mL), compounds (1, methyl gallate and 2, gallic acid at 1.25-10 mg/mL), positive control (ivermectin at 5 mg/mL) and two negative controls (distilled water and 4% methanol). After exposure, dead and live larvae were quantified and results were compared to their controls. The in vivo assay was carried out by a faecal egg count reduction test (FECRT); artificially infected goat kids (F1: Boer x Nubia) were treated with Cc ground dried fruits to assess the AA. The treatments were established as follows: G1-untreated goats (negative control), G2-goats dewormed with ivermectin (positive control), G3-goats fed with Cc mature fruits (10% of their diet). Results in both in vitro and in vivo assays were analysed using an ANOVA through random design, applying a general linear model and mixed models. The in vitro results showed an evident larvicidal effect of the HA-E, EtOAc-F from Cc, indicating that the compound responsible for the AA was gallic acid. The results of the in vivo study corroborated the anthelmintic properties of Cc, reaching 78.6% reduction in the elimination of Hc eggs per gram of faeces. This plant represents a potential natural anthelmintic for the control of haemonchosis in goats under grazing conditions. Future studies should standardise the Cc extract or dried fruits for use in the management of nematodiasis in goat herds.
Assuntos
Anti-Helmínticos , Caesalpinia , Doenças das Cabras , Hemoncose , Haemonchus , Infecções por Nematoides , Animais , Hemoncose/tratamento farmacológico , Hemoncose/veterinária , Frutas , Ivermectina/farmacologia , Metanol/farmacologia , Metanol/uso terapêutico , Extratos Vegetais/farmacologia , Extratos Vegetais/uso terapêutico , Anti-Helmínticos/farmacologia , Anti-Helmínticos/uso terapêutico , Infecções por Nematoides/tratamento farmacológico , Ácido Gálico/farmacologia , Ácido Gálico/uso terapêutico , Cabras , Água , Doenças das Cabras/tratamento farmacológico , Contagem de Ovos de Parasitas/veterináriaRESUMO
Forty-five Pelibuey sheep were experimentally infested with nematodes to evaluate the effect of three free condensed tannin (FCT) levels of Lysiloma acapulcensis on fecal egg counts (FECs), packed cell volumes (PCV), ocular mucosa colors (OMC), average daily gain (ADG), and adult nematode count. Five treatments were used: 12.5, 25.0, and 37.5 mg of FCT kg-1 of body weight (BW); sterile water (control); and ivermectine (0.22 mg kg-1 of BW) as chemical group. The data were processed through repeated measurement analysis. Even though the three FCT doses decreased (P < 0.05) the FEC, the highest reduction was obtained with 37.5 mg kg-1 of BW. No differences were observed in PCV and OMC. Higher ADG (P < 0.05) was observed with 37.5 mg kg-1 of BW of FCT. The count of adult nematodes (females and males) in the higher dose of FCT was similar to chemical treatment. Dose of 37.5 mg kg-1 of BW decreased the parasite infection and improved the lamb performance. Therefore, this dose could be used as a nutraceutic product in sheep production.
Assuntos
Hemoncose/veterinária , Contagem de Ovos de Parasitas/veterinária , Proantocianidinas/uso terapêutico , Doenças dos Ovinos/tratamento farmacológico , Animais , Peso Corporal , Suplementos Nutricionais , Fabaceae/química , Fezes/parasitologia , Feminino , Hemoncose/tratamento farmacológico , Hematócrito/veterinária , Ivermectina/química , Masculino , Mucosa , Nematoides , Ovinos , Doenças dos Ovinos/parasitologia , Carneiro Doméstico , Taninos/química , Aumento de PesoRESUMO
This research is based on the development of a human foot model to study the temperature conditions of a foot bottom surface under extreme external conditions. This foot model is made by combining different manufacturing techniques to enable the simulation of bones and tissues, allowing the placement of sensors on its surface to track the temperature values of different points inside a shoe. These sensors let researchers capture valuable data during a defined period of time, making it possible to compare the features of different safety boots, socks or soles, among others. In this case, it has been applied to compare different plantar insole materials, placed into safety boots on a high-temperature surface.
Assuntos
Bombeiros , Pé , Temperatura Alta , Modelos Biológicos , Sapatos/normas , Desenho de Equipamento , Humanos , Exposição Ocupacional/prevenção & controle , Saúde Ocupacional , Fatores de TempoRESUMO
This 8-week study evaluates the effects of customized foot orthoses on work-related musculoskeletal disorders (WMSDs) of metal industry workers. These WMSDs were evaluated applying the Nordic musculoskeletal questionnaire (NMQ) at three different times (start, 4th week and 8th week) and additional questions were also formulated to obtain information about adaptation, fatigue, comfort and possible improvements. According to the NMQ results, statistical significance was found in the improvements after 4â weeks (p < 0.05 in two areas, p < 0.01 in three areas, p < 0.001 in two areas and no significance in the other two) and after 8â weeks (p < 0.01 in three areas, p < 0.001 in four areas and no significance in the other two). The additional questions indicated fatigue reduction (both in general and in lower extremity), comfort level increase (after the adaptation period) and good acceptance, according to workers' answers, suggesting customized orthoses can be effective in reducing and preventing WMSDs in several body regions.
Assuntos
Órtoses do Pé , Indústrias , Metais , Doenças Musculoesqueléticas/reabilitação , Doenças Profissionais/reabilitação , Adulto , Ergonomia , Fadiga/reabilitação , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Fatores de Risco , Inquéritos e QuestionáriosRESUMO
As the number of Internet users grows, the increase in smart devices interconnected through the Internet of Things (IoT) have contributed to improvements in the functionality of everyday products and enhancement of user experience. Yet, they affect user privacy and render personal data more vulnerable. To foster a digital future fully aware of user privacy requirements, a line of design research emerges that focuses on balancing product innovation with user data protection. This matter relates to sociocultural, economic, and technological aspects, and its core is a human-centered design strategy. Still, there is a gap in academic research oriented towards guiding product developers on how to consider personal data privacy concerns when designing honest IoT devices. To define this gap and delve deeper into this relevant topic, this paper presents a systematic literature review of recent academic research using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method. This review focuses on prevalent research topics such as data privacy, personal data, data surveillance, and user behaviour in IoT. The result is a state-of-the-art compilation of 45 scientific studies mapping the most relevant concepts and approaches for product development in the last ten years of research, aligned with some central research questions. The Discussion and Conclusion sections provide a deep understanding of the complexity of the fast-changing landscape of privacy and personal data management using IoT products. Finally, this study proposes future academic research directions devoted to providing product designer specific, specialised help from different (yet interconnected) scientific approaches.
RESUMO
The present study investigated the performance of three ceramic inserts in terms of the micro-geometry (nose radius and cutting edge type) with the aid of a 3D finite element (FE) model. A set of nine simulation runs was performed according to three levels of cutting speed and feed rate with respect to a predefined depth of cut and tool nose radius. The yielded results were compared to the experimental values that were acquired at identical cutting conditions as the simulated ones for verification purposes. Consequently, two more sets of nine simulations each were carried out so that a total of 27 turning simulation runs would adduce. The two extra sets corresponded to the same cutting conditions, but to different cutting tools (with varied nose radius). Moreover, a prediction model was established based on statistical methodologies such as the response surface methodology (RSM) and the analysis of variance (ANOVA), further investigating the relationship between the critical parameters (cutting speed, feed rate, and nose radius) and their influence on the generated turning force components. The comparison between the experimental values of the cutting force components and the simulated ones demonstrated an increased correlation that exceeded 89%. Similarly, the values derived from the statistical model were in compliance with the equivalent FE model values due to the verified adequacy.