RESUMO
BACKGROUND: The prevalence of Parkinson's disease (PD) increases as the population ages. Studies have shown that some cardiometabolic comorbidities could be associated with risk or protection against developing PD. A retrospective case-control study was carried out to analyze the relationship between PD and cardiometabolic comorbidities. MATERIAL AND METHODS: Subjects with PD and controls without PD were consecutively recruited. Data on type 2 diabetes mellitus, systemic arterial hypertension (SAH), dyslipidemia and body mass index were collected. Logistic regression analyses were carried out. RESULTS: A total of 781 subjects with PD (56.5% males) and 1,000 controls (44.4% males) were included. After adjusting for age and gender, SAH was found as an independent risk factor (OR: 1.32; 95% CI: 1.05-1.67; p = 0.02), and obesity as a protective factor (OR: 0.72; 95% CI: 0.56-0.93; p = 0.01). CONCLUSIONS: Subjects with SAH had a higher risk of having PD, while obese subjects had a lower risk of having PD. The relationship between cardiometabolic disease, its treatment, and PD etiopathogenesis appears to be extremely complex given the amount of contradictory data.
ANTECEDENTES: La prevalencia de la enfermedad de Parkinson (EP) aumenta a medida que la población envejece. Los estudios han demostrado que algunas comorbilidades cardiometabólicas pudieran estar asociadas con el riesgo o la protección de desarrollar la EP. Se realizó un estudio retrospectivo de casos y controles para analizar la relación entre la EP y las comorbilidades cardiometabólicas. MATERIAL Y MÉTODOS: Se reclutaron sujetos con EP y controles sin EP de forma consecutiva. Se recolectaron datos sobre diabetes mellitus tipo 2, hipertensión arterial sistémica (HTA), dislipidemia e índice de masa corporal. Se llevó a cabo análisis de regresión logística. RESULTADOS: Se incluyeron un total de 781 personas con EP (56,5% hombres) y 1,000 controles (44,4% hombres). Después de ajustar por edad y sexo, la HTA se encontró como factor de riesgo independiente (OR 1.32, IC 95% 1.05-1.67, p = 0.02) y la obesidad como factor protector (OR 0.72, IC 95% 0.56-0.93, p = 0.01). CONCLUSIONES: Los sujetos con HTA tienen un mayor riesgo de tener EP; mientras que los sujetos obesos tienen un menor riesgo de tener EP. La relación entre la enfermedad cardiometabólica, su tratamiento y etiopatogenia de la EP parece ser extremadamente compleja dada la cantidad de datos contradictorios.
Assuntos
Diabetes Mellitus Tipo 2 , Hipertensão , Doença de Parkinson , Estudos de Casos e Controles , Diabetes Mellitus Tipo 2/epidemiologia , Feminino , Humanos , Hipertensão/epidemiologia , Masculino , Doença de Parkinson/epidemiologia , Estudos RetrospectivosRESUMO
Transport layers are of outmost importance for thin-film solar cells, determining not only their efficiency but also their stability. To bring one of these thin-film technologies toward mass production, many factors besides efficiency and stability become important, including the ease of deposition in a scalable manner and the cost of the different material's layers. Herein, highly efficient organic solar cells (OSCs), in the inverted structure (n-i-p), are demonstrated by using as electron transport layer (ETL) tin oxide (SnO2 ) deposited by atomic layer deposition (ALD). ALD is an industrial grade technique which can be applied at the wafer level and also in a roll-to-roll configuration. A champion power conversion efficiency (PCE) of 17.26% and a record fill factor (FF) of 79% are shown by PM6:L8-BO OSCs when using ALD-SnO2 as ETL. These devices outperform solar cells with SnO2 nanoparticles casted from solution (PCE 16.03%, FF 74%) and also those utilizing the more common sol-gel ZnO (PCE 16.84%, FF 77%). The outstanding results are attributed to a reduced charge carrier recombination at the interface between the ALD-SnO2 film and the active layer. Furthermore, a higher stability under illumination is demonstrated for the devices with ALD-SnO2 in comparison with those utilizing ZnO.
RESUMO
The development of an environmentally friendly fabrication process for non-fullerene acceptor organic solar cells is an essential condition for their commercialization. However, devices fabricated by processing the active layer with green solvents still struggle to reach, in terms of efficiency, the same performance as those fabricated with halogenated solvents. The reason behind this is the non-optimal nanostructure of the active layer obtained with green solvents. Additives in solution have been used to fine-tune the nanostructure and improve the performance of organic solar cells. Therefore, the identification of non-halogenated additives and the study of their effects on the device performance and stability are of primary importance. In this work, we propose the use of diphenyl ether (DPE) as additive, in combination with the non-halogenated solvent o-xylene, to fabricate organic solar cells with a completely halogen-free process. Thanks to the addition of DPE, a best efficiency of 11.7% have been obtained for the system TPD-3F:IT-4F, an increase over 15% with respect to the efficiency of devices fabricated without additive. Remarkably, the stability under illumination of the solar cells is also improved when DPE is used. The addition of DPE has effects on the molecular organization in the active layer, with an enhancement in the donor polymer ordering, showing a higher domain purity. The resulting structure improves the charge carrier collection, leading to a superior short-circuit current and fill factor. Furthermore, a reduction of the non-radiative recombination losses and an improved exciton diffusion, are the results of the superior molecular ordering. With a comprehensive insight of the effects of DPE when used in combination with a non-halogenated solvent, our study provides an approach to make the fabrication of organic solar cell environmentally friendlier and more suitable for large scale production.
RESUMO
Frontotemporal dementia (FTD) is a heterogeneous condition characterized by changes in behavior, personality, and language resulting from degeneration of the frontal and/or temporal lobes. A wide spectrum of clinical syndromes and an overlap with different motor disorders make this entity challenging for clinicians, both in achieving a correct diagnosis and providing proper treatment. Despite the majority of cases being sporadic, FTD has a hereditary component, and more than 10 disease-causing genes have been identified. We present the case of a Mexican patient with a positive family history of neurocognitive disorders who developed early-onset behavioral symptoms, cognitive alterations, and motor disturbances. After a comprehensive study and multiple assessments by various medical services, a molecular diagnosis was achieved by documenting a loss-of-function mutation in the TANK-binding kinase 1 (TBK1) gene, an extremely rare cause of FTD. Genetic diagnosis is crucial in these situations, as this mutation has been associated with rapid disease progression and the potential development of motor syndromes during its course. Our case underscores the challenges involved in reaching an accurate diagnosis, highlighting the importance of molecular testing. A thorough family history, past medical records, and a detailed description of symptom onset and progression are imperative, as they can significantly influence both treatment approaches and prognosis. Diagnostic errors, combined with their subsequent inappropriate treatment, can further deteriorate patients' quality of life.
RESUMO
The control of morphology and microstructure during and after the active layer processing of bulk-heterojunction solar cells is critical to obtain elevated fill factors and overall good device performance. With the recent development of non-fullerene acceptors, wide attention has been paid to improve miscibility, solubility and nanoscale separation by laborious molecular design processes and by the use of additives. Nonetheless, several post-processing strategies can equally contribute to obtain an optimum phase separation and even to an enhanced crystallinity, but their effect on performance and device lifetime of polymer/non-fullerene acceptor solar cells is still unclear. Herein, we report a systematic comparison between different post-processing treatments including thermal annealing (TA), vacuum drying (VD) and solvent vapor annealing (SVA) on the TPD-3F polymer and IT-4F non-fullerene acceptor, comparing their effects on device performance as well as on the morphology and optical and electrical properties. The optimized SVA treated devices exhibited power conversion efficiencies close to 14% with a remarkable 76% fill factor and superior short-circuit currents compared to the one of untreated devices. Moreover, SVA demonstrated improvements in device stability both under illumination and under ambient conditions. The induced phase separation and the increased crystallinity of the acceptor molecules, as revealed by GIWAXS measurements, led to increased photogenerated currents, with a more effective exciton dissociation and charge collection. The open-circuit voltage losses in the SVA and TA devices were explained by a bandgap reduction and a higher trap-assisted recombination, respectively. Overall, our study points to the role of post-processing in organic solar cell fabrication, and contributes towards a new generation of efficient and stable additive-free organic solar cells.
RESUMO
Fragility fractures constitute a major public health problem worldwide, causing important high morbidity and mortality rates. The aim was to present the epidemiology of fragility fractures and to assess the imminent risk of a subsequent fracture and mortality. This is a retrospective population-based cohort study (n = 1369) with a fragility fracture. We estimated the incidence rate of index fragility fractures and obtained information on the subsequent fractures and death during a follow-up of up to three years. We assessed the effect of age, sex, and skeletal site of index fracture as independent risk factors of further fractures and mortality. Incidence rate of index fragility fractures was 86.9/10,000 person-years, with highest rates for hip fractures in women aged ≥80 years. The risk of fracture was higher in subjects with a recent fracture (Relative Risk(RR), 1.80; p < 0.01). Higher age was an independent risk factor for further fracture events. Significant excess mortality was found in subjects aged ≥80 years and with a previous hip fracture (hazard ratio, 3.43 and 2.48, respectively). It is the first study in Spain to evaluate the incidence of major osteoporotic fractures, not only of the hip, and the rate of imminent fracture. Our results provide further evidence highlighting the need for early treatment.