Advances and Challenges in Development of Transition Metal Catalysts for Heterogeneous Hydrogenation of Organic Compounds.

Actual problems of development of catalysts for hydrogenation of heterocyclic compounds by hydrogen are summarized and discussed. The scope of review covers composites of nanoparticles of platinum group metals and 3d metals for heterogeneous catalytic processes. Such problems include increase of catalyst activity, which is important for reduction of precious metals content; development of new catalytic systems which do not contain metals of platinum group or contain cheaper analogues of Pd; control of factors which make influence on the selectivity of the catalysts; achievement of high reproducibility of the catalyst's performance and quality control of the catalysts. Own results of the authors are also summarized and described. The catalysts were prepared by decomposition of Pd0 and Ni0 complexes, pyrolysis of Ni2+ and Co2+ complexes deposited on aerosil and reduction of Ni2+ in pores of porous support in situ. The developed catalysts were used for hydrogenation of multigram batches of heterocyclic compounds.

Catalytic Oxidation of Benzoins by Hydrogen Peroxide on Nanosized HKUST-1: Influence of Substituents on the Reaction Rates and DFT Modeling of the Reaction Path.

In this research, the oxidation of a series of benzoins, R-C(=O)-CH(OH)-R, where R = phenyl, 4-methoxyphenyl, 4-bromophenyl, and 2-naphthyl, by hydrogen peroxide in the presence of nanostructured HKUST-1 (suspension in acetonitrile/water mixture) was studied. The respective benzoic acids were the only products of the reactions. The initial average reaction rates were experimentally determined at different concentrations of benzoin, H2O2 and an effective concentration of HKUST-1. The sorption of the isotherms of benzoin, dimethoxybenzoin and benzoic acid on HKUST-1, as well as their sorption kinetic curves, were measured. The increase in H2O2 concentration expectedly led to an acceleration of the reaction. The dependencies of the benzoin oxidation rates on the concentrations of both benzoin and HKUST-1 passed through the maxima. This finding could be explained by a counterplay between the increasing reaction rate and increasing benzoin sorption on the catalyst with the increase in the concentration. The electronic effect of the substituent in benzoin had a significant influence on the reaction rate, while no relation between the size of the substrate molecule and the rate of its oxidation was found. It was confirmed by DFT modeling that the reaction could pass through the Baeyer-Villiger mechanism, involving an attack by the HOO- anion on the C atom of the activated C=O group.

Reductive Recyclization of sp3-Enriched Functionalized Isoxazolines into α-Hydroxy Lactams.

An efficient synthesis (up to a 200 g scale) of 3-hydroxypyrrolidin-2-ones bearing alkyl substituents or functional groups at the C-5 position is described. The reaction sequence started from 1,3-dipolar cycloaddition of in situ generated nitrile oxides with (meth-)acrylates into 3-substituted isoxazoline-5-carboxylates. The catalytic hydrogenolysis of the isoxazoline N-O bond was optimal upon using H2 (1 atm) at rt, with the following order of the catalyst activity: Pd-C > Pd(OH)2-C > Pt-C. The reactions with Pt-C were more selective for the synthesis of pyrrolidones, while Pd-C provided the fastest conversion rates. The stirring efficiency had a positive impact on conversion rather than elevated temperatures (up to 40 °C) or pressure (up to 50 atm). The diastereoselectivity was governed mainly by steric factors, with a dr of 1:1 to 3:1 (cis- and trans-isomers could be separated). Higher homologues (isoxazolinylacetates and -propanoates) were suitable for the synthesis of 6- or 7-substituted 4-hydroxypiperidones and 5-hydroxyazepanones, respectively. The proposed methods are tolerant to functional groups, including CF3 (but not CHF2 or CH2Cl), ester, and most N-Boc-protected amines. The utility of hydroxyl groups in lactams was shown by functional group transformations. Hydrogenolysis of C(5)-functionalized isoxazolines, bearing trimethylsilyl, phosphonate, or sulfone groups, was also studied to demonstrate limitations.

A Close-up Look at the Chemical Space of Commercially Available Building Blocks for Medicinal Chemistry.

The ability to efficiently synthesize desired compounds can be a limiting factor for chemical space exploration in drug discovery. This ability is conditioned not only by the existence of well-studied synthetic protocols but also by the availability of corresponding reagents, so-called building blocks (BBs). In this work, we present a detailed analysis of the chemical space of 400 000 purchasable BBs. The chemical space was defined by corresponding synthons─fragments contributed to the final molecules upon reaction. They allow an analysis of BB physicochemical properties and diversity, unbiased by the leaving and protective groups in actual reagents. The main classes of BBs were analyzed in terms of their availability, rule-of-two-defined quality, and diversity. Available BBs were eventually compared to a reference set of biologically relevant synthons derived from ChEMBL fragmentation, in order to illustrate how well they cover the actual medicinal chemistry needs. This was performed on a newly constructed universal generative topographic map of synthon chemical space that enables visualization of both libraries and analysis of their overlapped and library-specific regions.

Third Generation Buchwald Precatalysts with XPhos and RuPhos: Multigram Scale Synthesis, Solvent-Dependent Isomerization of XPhos Pd G3 and Quality Control by 1H- and 31P-NMR Spectroscopy.

The third generation Buchwald precatalysts Pd(ABP)(Phos)(OMs) (also known as Phos Pd G3)) with XPhos and RuPhos were prepared in multigram scale by a modified procedure (ABP = fragment of C-deprotonated 2-aminobiphenyl, XPhos = 2-dicyclohexylphosphino-2',4',6'-triisopropylbiphenyl, RuPhos = 2-dicyclohexylphosphino-2',6'-diisopropoxybiphenyl, OMs- = CH3SO3-). The 1H- and 31P-NMR spectra of the title complexes and some impurities, measured by various 1D and 2D techniques, were analyzed in detail. The solvent-dependent isomerization of Pd(ABP)(XPhos)(OMs) was studied by NMR, and the X-ray structures of two isomers were determined. The impurities in precatalysts, such as Pd(ABP)(HABP)(OMs) (HABP-neutral 2-aminobiphenyl coordinated to Pd2+ in N-monodentate mode) and PdCl2(XPhos)2, were identified and characterized by single crystal X-ray diffraction. A simple method for the quick quality control (QC) of the precatalysts, suitable for routine use, was proposed. The method was based on the assessment of the impurity content on the basis of the 1H-NMR spectra analysis.

Versatile Reactivity of MnII Complexes in Reactions with N-Donor Heterocycles: Metamorphosis of Labile Homometallic Pivalates vs. Assembling of Endurable Heterometallic Acetates.

Reaction of 2,2'-bipyridine (2,2'-bipy) or 1,10-phenantroline (phen) with [Mn(Piv)2(EtOH)]n led to the formation of binuclear complexes [Mn2(Piv)4L2] (L = 2,2'-bipy (1), phen (2); Piv- is the anion of pivalic acid). Oxidation of 1 or 2 by air oxygen resulted in the formation of tetranuclear MnII/III complexes [Mn4O2(Piv)6L2] (L = 2,2'-bipy (3), phen (4)). The hexanuclear complex [Mn6(OH)2(Piv)10(pym)4] (5) was formed in the reaction of [Mn(Piv)2(EtOH)]n with pyrimidine (pym), while oxidation of 5 produced the coordination polymer [Mn6O2(Piv)10(pym)2]n (6). Use of pyrazine (pz) instead of pyrimidine led to the 2D-coordination polymer [Mn4(OH)(Piv)7(µ2-pz)2]n (7). Interaction of [Mn(Piv)2(EtOH)]n with FeCl3 resulted in the formation of the hexanuclear complex [MnII4FeIII2O2(Piv)10(MeCN)2(HPiv)2] (8). The reactions of [MnFe2O(OAc)6(H2O)3] with 4,4'-bipyridine (4,4'-bipy) or trans-1,2-(4-pyridyl)ethylene (bpe) led to the formation of 1D-polymers [MnFe2O(OAc)6L2]n·2nDMF, where L = 4,4'-bipy (9·2DMF), bpe (10·2DMF) and [MnFe2O(OAc)6(bpe)(DMF)]n·3.5nDMF (11·3.5DMF). All complexes were characterized by single-crystal X-ray diffraction. Desolvation of 11·3.5DMF led to a collapse of the porous crystal lattice that was confirmed by PXRD and N2 sorption measurements, while alcohol adsorption led to porous structure restoration. Weak antiferromagnetic exchange was found in the case of binuclear MnII complexes (JMn-Mn = -1.03 cm-1 for 1 and 2). According to magnetic data analysis (JMn-Mn = -(2.69 ÷ 0.42) cm-1) and DFT calculations (JMn-Mn = -(6.9 ÷ 0.9) cm-1) weak antiferromagnetic coupling between MnII ions also occurred in the tetranuclear {Mn4(OH)(Piv)7} unit of the 2D polymer 7. In contrast, strong antiferromagnetic coupling was found in oxo-bridged trinuclear fragment {MnFe2O(OAc)6} in 11·3.5DMF (JFe-Fe = -57.8 cm-1, JFe-Mn = -20.12 cm-1).

Regioselective Synthesis of Functionalized 3- or 5-Fluoroalkyl Isoxazoles and Pyrazoles from Fluoroalkyl Ynones and Binucleophiles.

A facile synthetic route toward either 3- or 5-fluoroalkyl-substituted isoxazoles or pyrazoles containing an additional functionalization site was developed and applied on a multigram scale. The elaborated approach extends the scope of fluoroalkyl substituents for introduction into the heterocyclic moiety, and uses convenient transformations of the side chain for incorporation of fluoroalkyl-substituted azoles into the structures of biologically active molecules. The utility of the obtained building blocks for isosteric replacement of alkyl-substituted isoxazole and pyrazole was shown by the synthesis of fluorinated Isocarboxazid and Mepiprazole analogues.

Synthesis of 5-(Fluoroalkyl)isoxazole Building Blocks by Regioselective Reactions of Functionalized Halogenoximes.

A comprehensive study on the synthesis of 5-fluoroalkyl-substituted isoxazoles starting from functionalized halogenoximes is reported. One-pot metal-free [3 + 2] cycloaddition of CF3-substituted alkenes and halogenoximes bearing ester, bromo, chloromethyl, and protected amino groups was developed for the preparation of 5-trifluoromethylisoxazoles. The target 3,5-disubstituted derivatives were obtained in a regioselective manner in good to excellent yield on up to 130 g scale. 5-Fluoromethyl- and 5-difluoromethylisoxazoles were synthesized by late-stage deoxofluorination of the corresponding 5-hydroxymethyl or 5-formyl derivatives, respectively, in turn prepared via metal-free cycloaddition of halogenoximes and propargylic alcohol. An alternative approach based on nucleophilic substitution in 5-bromomethyl derivatives was found to be more convenient for the preparation of 5-fluoromethylisoxazoles. Reaction of isoxazole-5-carbaldehydes with the Ruppert-Prakash reagent was used for the preparation of (ß,ß,ß-trifluoro-α-hydroxyethyl)isoxazoles. Utility of described approaches was shown by multigram preparation of side-chain functionalized mono-, di-, and trifluoromethylisoxazoles, for example, fluorinated analogues of ABT-418 and ESI-09.

Regioselective synthesis of isoxazole and 1,2,4-oxadiazole-derived phosphonates via [3 + 2] cycloaddition.

The results of the study on reactions of halogenoximes bearing (protected) functional groups or fluorinated substituents with various phosphorus-containing dipolarophiles are described. To control the regioselectivity of the reaction, vinylphosphonates bearing a leaving group (i.e. bromine or dialkylamino group) in the α or ß position were used; 3,5- and 3,4-disubstituted isoxazoles were obtained in 47-80% and 63-75% yields, respectively. The reaction was also effective for the parent vinyl phosphonate and cyanophosphonate; in this case, the corresponding isoxazoline- and 1,2,4-oxadiazole-derived phosphonates were isolated in 55-69% and 34-73% yields, respectively. The utility of the products obtained was demonstrated by the preparation of direct conformationally restricted analogues of phosphohistidine.

Synthesis of Spirocyclic Pyrrolidines: Advanced Building Blocks for Drug Discovery.

In the context of drug discovery, novel spirocyclic pyrrolidines have been synthesized in two steps from common three- to seven-membered-ring (hetero)alicyclic ketones. The key transformation is a reaction between an electron-deficient exocyclic alkene and an in situ generated N-benzyl azomethine ylide. The developed method has been used to synthesize the central diamine core of the known antibacterial agents Sitafloxacin and Olamufloxacin.

Heterometallic Coordination Polymers Assembled from Trigonal Trinuclear Fe2Ni-Pivalate Blocks and Polypyridine Spacers: Topological Diversity, Sorption, and Catalytic Properties.

Linkage of the trigonal complex [Fe2NiO(Piv)6] (where Piv(-) = pivalate) by a series of polypyridine ligands, namely, tris(4-pyridyl)triazine (L(2)), 2,6-bis(3-pyridyl)-4-(4-pyridyl)pyridine (L(3)), N-(bis-2,2-(4-pyridyloxymethyl)-3-(4-pyridyloxy)propyl))pyridone-4 (L(4)), and 4-(N,N-diethylamino)phenyl-bis-2,6-(4-pyridyl)pyridine (L(5)) resulted in the formation of novel coordination polymers [Fe2NiO(Piv)6(L(2))]n (2), [Fe2NiO(Piv)6(L(3))]n (3), [Fe2NiO(Piv)6(L(4))]n·nHPiv (4), and [{Fe2NiO(Piv)6}4{L(5)}6]n·3nDEF (5, where DEF is N,N-diethylformamide), which were crystallographically characterized. The topological analysis of 3, 4, and 5 disclosed the 3,3,4,4-connected 2D (3, 4) or 3,4,4-connected 1D (5) underlying networks which, upon further simplification, gave rise to the uninodal 3-connected nets with the respective fes (3, 4) or SP 1-periodic net (4,4)(0,2) (5) topologies, driven by the cluster [Fe2Ni(µ3-O)(µ-Piv)6] nodes and the polypyridine µ3-L(3,4) or µ2-L(5) blocks. The obtained topologies were compared with those identified in other closely related derivatives [Fe2NiO(Piv)6(L(1))]n (1) and {Fe2NiO(Piv)6}8{L(6)}12 (6), where L(1) and L(6) are tris(4-pyridyl)pyridine and 4-(N,N-dimethylamino)phenyl-bis-2,6-(4-pyridyl)pyridine, respectively. It was shown that a key structure-driven role in defining the dimensionality and topology of the resulting coordination network is played by the type of polypyridine spacer. Compounds 2 and 3 possess a porous structure, as confirmed by the N2 and H2 sorption data at 78 K. Methanol and ethanol sorption by 2 was also studied indicating that the pores filled by these substrates did not induce any structural rearrangement of this sorbent. Additionally, porous coordination polymer 2 was also applied as a heterogeneous catalyst for the condensation of salicylaldehyde or 9-anthracenecarbaldehyde with malononitrile. The best activity of 2 was observed in the case of salicylaldehyde substrate, resulting in up to 88% conversion into 2-imino-2H-chromen-3-carbonitrile.

Phenyl-1-Pyridin-2yl-ethanone-based iron chelators increase IκB-α expression, modulate CDK2 and CDK9 activities, and inhibit HIV-1 transcription.

HIV-1 transcription is activated by the Tat protein, which recruits CDK9/cyclin T1 to the HIV-1 promoter. CDK9 is phosphorylated by CDK2, which facilitates formation of the high-molecular-weight positive transcription elongation factor b (P-TEFb) complex. We previously showed that chelation of intracellular iron inhibits CDK2 and CDK9 activities and suppresses HIV-1 transcription, but the mechanism of the inhibition was not understood. In the present study, we tested a set of novel iron chelators for the ability to inhibit HIV-1 transcription and elucidated their mechanism of action. Novel phenyl-1-pyridin-2yl-ethanone (PPY)-based iron chelators were synthesized and examined for their effects on cellular iron, HIV-1 inhibition, and cytotoxicity. Activities of CDK2 and CDK9, expression of CDK9-dependent and CDK2-inhibitory mRNAs, NF-κB expression, and HIV-1- and NF-κB-dependent transcription were determined. PPY-based iron chelators significantly inhibited HIV-1, with minimal cytotoxicity, in cultured and primary cells chronically or acutely infected with HIV-1 subtype B, but they had less of an effect on HIV-1 subtype C. Iron chelators upregulated the expression of IκB-α, with increased accumulation of cytoplasmic NF-κB. The iron chelators inhibited CDK2 activity and reduced the amount of CDK9/cyclin T1 in the large P-TEFb complex. Iron chelators reduced HIV-1 Gag and Env mRNA synthesis but had no effect on HIV-1 reverse transcription. In addition, iron chelators moderately inhibited basal HIV-1 transcription, equally affecting HIV-1 and Sp1- or NF-κB-driven transcription. By virtue of their involvement in targeting several key steps in HIV-1 transcription, these novel iron chelators have the potential for the development of new therapeutics for the treatment of HIV-1 infection.

Combination of single-molecule magnet behaviour and luminescence properties in a new series of lanthanide complexes with tris(pyrazolyl)borate and oligo(ß-diketonate) ligands.

A series of tris(pyrazolyl)borate mono-, di- and trinuclear complexes, [Tp2Ln]nX (Ln = Eu, Tb, Gd, Dy, Xn- = various mono-, bis- and tris(ß-diketonates) has been prepared. The Tb3+ and Dy3+ complexes are luminescent single molecular magnets (SMM) and exhibit luminescence quantum efficiencies up to 73% for the Tb3+ and 4.4% for the Dy3+ compounds. Similar Eu3+ complexes display bright emission only at lower temperatures. The Dy3+ and Tb3+ complexes possess SMM behavior in a non-zero dc field at low temperatures, while the polynuclear Dy3+ complexes also show slow magnetic relaxation even in zero dc field up to 8 K. Ueff-values determined from dynamic magnetic measurements were up to 31 and 6 cm-1 for the Dy3+ and Tb3+ complexes, respectively. It was found that within a series of Dy3+ and Tb3+ compounds, Ueff and luminescence quantum yields decreased with increasing nuclearity of the compounds and a shortening of the intramolecular Ln-Ln distance. ΔOrbach-values estimated from low-temperature luminescence spectra were significantly higher than those obtained from ac magnetic data, which may be due to involvement of additional processes in the relaxation mechanism (quantum tunneling, Raman, direct) reducing the energy barrier. Some of the Tb3+-compounds also display metal-centred electroluminescence, giving them potential as emitting layers in LEDs.

Absorption- and Excitation-Modulated Luminescence of Pr3+, Nd3+, and Lu3+ Compounds with Dianions of Tetrafluoroterephthalic and Camphoric Acids.

The luminescence of coordination polymers of Pr3+, Nd3+, and Lu3+ with tetrafluoroterephthalate and camphorate, [Ln2(Fbdc)3(DMF)2(H2O)]2 (Ln = Pr, Nd, Lu) and [Ln2(Camph)2(NO3)2(MeOH)]4 (Ln = Pr, Nd, Lu), was studied. Ligand-centered and/or metal-centered emissions appear, which depend on the excitation wavelength, ultimately allowing the emitted light color to be adjusted. Low-efficiency ligand-to-metal energy transfer leads to a difference between the excitation spectra of the tetrafluoroterephthalate- and camphorate-Pr3+ compounds, arising from a primary filtering effect on the ligand-centered excitation, by Pr3+ absorption. A secondary inner filter effect significantly changes the shape of the luminescence band, allowing a wide variation in the emission color, producing, for instance, a purple color, which is not the normal spectral emission. The low-efficiency energy transfer renders tetrafluoroterephthalate and camphorate ineffective as traditional "antenna" ligands for Pr3+ and Nd3+.

CoII Complexes with a Tripyridine Ligand, Containing a 2,6-Di-tert-butylphenolic Fragment: Synthesis, Structure, and Formation of Stable Radicals.

Interaction of a tripyridine ligand bearing a 2,6-di-tert-butylphenolic fragment (L, 2,6-di-tert-butyl-4-(3,5-bis(4-pyridyl)pyridyl)phenol) with CoII pivalate or chloride led to the formation of one-dimensional coordination polymers [Co(L)Cl2] n ·nEtOH (1) and [Co3(L)2(OH)(Piv)5] n (2) or a trinuclear complex Co3(H2O)4(L)2Cl6 (3) (Piv- = pivalate). Chemical oxidation of L and 1-3 by PbO2 or K3[Fe(CN)6], as well as exposure of L (in solution or solid state) and 2 (in solid state) to UV irradiation, led to the formation of free radicals with g = 2.0024, which probably originated because of oxidation of 2,6-di-tert-butylphenolic groups. These radicals were stable for several days in solutions and more than 1 month in solid samples. Irradiation and oxidation of the solid samples probably caused formation of the phenoxyl radical only on their surface. It was shown by density functional theory calculations that exchange coupling between the unpaired electron of the phenoxyl radical and CoII ions was negligibly weak and could not affect the electron paramagnetic resonance signal of the radical, as well as exchange coupling of CoII ions could not be transmitted by L. The latter conclusion was confirmed by the analysis of magnetic properties of 1: temperature dependency of magnetic susceptibility (χM) of 1 could be simulated by a simple model for isolated CoII ions.

Synthesis of quinolines from 3-formylchromone.

A facile and versatile procedure for the synthesis of 3-(2-hydroxybenzoyl)quinolines and 7H-chromeno[3,2-c]quinolin-7-ones was elaborated on the basis of TMSCl-mediated recyclization of 3-formylchromone with various anilines. Limitations and scope of this methodology were established, and a possible mechanism for the heterocyclizations was proposed.

First trinuclear paramagnetic transition metal complexes with redox active ligands derived from TTF: Co2M(PhCOO)6(TTF-CH=CH-py)2.2CH3CN, M = CoII, MnII.

The first paramagnetic homo- and hetero-metallic trinuclear complexes with redox active ligands derived from TTF are synthesized, the central metal ion has an octahedral coordination sphere while the outer Co(II) ions are in a distorted bipyramidal surrounding, bearing TTF-ligands, the magnetic properties show antiferromagnetic coupling leading to a magnetic ground state.

Crystal structures and intense luminescence of tris(3-(2'-pyridyl)-pyrazolyl)borate Tb3+ and Eu3+ complexes with carboxylate co-ligands.

A series of brightly luminescent new mononuclear TpPyLn(An)2(H2O) (where An- = carboxylate anion, Ln = Eu or Tb and TpPy- = tris(3-(2'-pyridyl)pyrazolyl)borate) and dinuclear (TpPyLn)2pma(MeOH)2 (Ln = Eu, Tb, pma4- = tetraanion of pyromellitic acid) complexes were prepared and characterized by X-ray crystallography. Within each series the compounds possess similar molecular structures, which differ only by the nature of the carboxylate anions. The quantum efficiencies for metal-centered emission of the complexes were up to 29(3)% for Eu3+ and 53(5)% for the Tb3+ compounds and significantly depend on the electronic structure of the additional ligand (i.e. the carboxylate). The aliphatic carboxylate compounds' luminescence quantum yields were all similar, but different from those for the aromatic ones. The complexes with trifluoroacetate and pentafluorobenzoate unexpectedly displayed lower quantum efficiencies compared to those with the corresponding non-fluorinated analogues. Energy transfer from Tb3+ to Eu3+ occurs in a mixture of (TpPyEu)(pma)(TbTpPy)(MeOH)2, (TpPyEu)2(pma)(MeOH)2 and (TpPyTb)2(pma)(MeOH)2 but is not very efficient. The Tb3+-compounds displayed green electroluminescence, and both the Eu3+ and Tb3+ complexes exhibited bright metal-centered red (Eu3+) or green (Tb3+) triboluminescence.

Porous 2D coordination polymeric formate built up by Mn(II) linking of Fe3O units: influence of guest molecules on magnetic properties.

A first representative of coordination polymers, built from polynuclear carboxylate bridged by mononuclear carboxylate, has been synthesised and structurally characterized. The compound [{Fe(3)O(HCOO)(6)}{Mn(HCOO)(3)(H(2)O)(3)}].3.5HCOOH crystallised in the hexagonal system (space group P6(3)), a = b = 12.369(5) A, c = 12.992(5) A, alpha = beta = 90 degrees , gamma = 120 degrees , V = 1721.4(12) A(3). The crystal structure is built from 2D layers, which are formed by the linking of trinuclear {Fe(3)O(HCOO)(6)}(+) units by mononuclear {Mn(HCOO)(3)(H(2)O)(3)}(-) bridges. These 2D honeycomb layers are connected by molecules of formic acid through a hydrogen bond network. The compound has the voids at the centre of the hexagons. These voids are filled by captured solvent molecules. Solvate molecules are also located between the 2D layers, linking them through a system of H-bonds. All these solvates can be easily removed and/or exchanged, which results in the formation of [{Fe(3)O(HCOO)(6)}{Mn(HCOO)(3)(H(2)O)(3)}].0.5HCOOH.H(2)O and [{Fe(3)O(HCOO)(6)}{Mn(HCOO)(3)(H(2)O)(3)}]. Magnetic properties of the compounds can be considered as the superposition of magnetism of Fe(3)O trinuclear units, for which magnetism is governed by the superexchange interaction between Fe(3+) spins (with one Fe-Fe superexchange parameter J) and the magnetism of spins of Mn(2+) ions, the interactions between these units can be taken into account by molecular field, zJ'. The destruction of the hydrogen bond network caused by evacuation of solvent molecules significantly modifies the overall magnetism. It was found that zJ' depends on the presence of solvent molecules in the structure.

Delicate crystal structure changes govern the magnetic properties of 1D coordination polymers based on 3d metal carboxylates.

Homo- and heterometallic 1D coordination polymers of transition metals (Co II, Mn II, Zn II) have been synthesized by an in-situ ligand generation route. Carboxylato-based complexes [Co(PhCOO)2]n (1 a, 1 b), [Co(p-MePhCOO)2]n (2), [ZnMn(PhCOO)4]n (3), and [CoZn(PhCOO)4]n (4) (PhCOOH=benzoic acid, p-MePhCOOH=p-methylbenzoic acid) have been characterized by chemical analysis, single-crystal X-ray diffraction, and magnetization measurements. The new complexes 2 and 3 crystallize in orthorhombic space groups Pnab and Pcab respectively. Their crystal structures consist of zigzag chains, with alternating M(II) centers in octahedral and tetrahedral positions, which are similar to those of 1 a and 1 b. Compound 4 crystallizes in monoclinic space group P2 1/c and comprises zigzag chains of M II ions in a tetrahedral coordination environment. Magnetic investigations reveal the existence of antiferromagnetic interactions between magnetic centers in the heterometallic complexes 3 and 4, while ferromagnetic interactions operate in homometallic compounds (1 a, 1 b, and 2). Compound 1 b orders ferromagnetically at TC=3.7 K whereas 1 a does not show any magnetic ordering down to 330 mK and displays typical single-chain magnet (SCM) behavior with slowing down of magnetization relaxation below 0.6 K. Single-crystal measurements reveal that the system is easily magnetized in the chain direction for 1 a whereas the chain direction coincides with the hard magnetic axis in 1 b. Despite important similarities, small differences in the molecular and crystal structures of these two compounds lead to this dramatic change in properties.