Can we separately measure glenoid vs. humeral lateralization and distalization in reverse shoulder arthroplasty?

BACKGROUND: Lateralization and distalization in reverse shoulder arthroplasty (RSA) can be measured on anteroposterior (AP) radiographs using 2 previously described angles: lateralization shoulder angle (LSA) and distalization shoulder angle (DSA). However, these 2 angles measure global lateralization and distalization but do not allow to differentiate how much lateralization or distalization are attributable to the glenoid and the humerus. We hypothesized that new angles could allow us to separately measure glenoid vs. humeral lateralization and distalization. A more precise understanding of independent glenoid and humeral contributions to lateralization and distalization may be beneficial in subsequent clinical research. METHOD: Retrospective analysis of postoperative AP radiographs of 100 patients who underwent primary RSA for cuff-tear arthropathy, massive cuff tear, or glenohumeral osteoarthritis were analyzed. The new angles that we proposed use well-known bony landmarks (the acromion, glenoid, and humerus) and the most lateral point of the glenosphere, which we termed the "glenoid pivot point" (GPP). For lateralization, we used the GPP to split LSA into 2 new angles: glenoid lateralization angle (GLA) and humeral lateralization angle (HLA). For distalization, we introduced the modified distalization shoulder angle (mDSA) that can also be split into 2 new angles: glenoid distalization angle (GDA) and humeral distalization angle (HDA). Three orthopedic surgeons measured the new angles, using the online tool Tyche. Mean values with overall and individual standard deviations as well as intraclass correlation coefficients (ICCs) were calculated. RESULTS: Because the angles form a triangle, the following equations can be made: LSA = GLA + HLA, and mDSA = GDA + HDA. All angles showed excellent inter- and intraobserver reliability (ICC = 0.92-0.97) with low means of individual standard deviations that indicate a precision of 2° for each angle. CONCLUSION: Use of the most lateral part of the glenosphere (termed glenoid pivot point) allows us to separately measure glenoid vs. humeral lateralization and distalization. The 4 new angles (HLA, GLA, GDA, HDA) described in the present study can be used on true AP radiographs, routinely obtained after shoulder replacement, and the measured angles may be used with all types of reverse prostheses available.

An isoelastic monoblock cup versus a modular metal-back cup: a matched-pair analysis of clinical and radiological results using Einzel-Bild-Röntgen-Analyse software.

INTRODUCTION: Bone preservation and long-term survival are the main challenges in cementless total hip arthroplasty (THA). A good bone stock is especially important for adequate anchorage of the cup in revision cases. However, the optimal acetabular cup design for preserving good bone stock is still unclear. We aimed to compare clinical outcome, radiological alterations, migration, and wear at mid-term for two different cup types. MATERIALS AND METHODS: This retrospective matched-pair study was performed using the data for 98 THA cases treated with a monoblock cup composed of vitamin E-blended highly cross-linked polyethylene (VEPE; monoblock group) or a modular cup composed of a highly cross-linked polyethylene (HXLPE) without an antioxidant (modular group). Clinical results were evaluated using the Harris Hip Score (HHS). The obtained radiographs were analyzed for radiological alterations, migration, and wear using Einzel-Bild-Röntgen-Analyse (EBRA) software. RESULTS: The mean follow-up duration was 73.2 ± 19.2 months (range: 32-108 months) and 60.5 ± 12.2 months (range: 20-84 months) in the monoblock and modular groups, respectively. HHS improved to 95.7 points in the monoblock group and 97.6 points in the modular group, without significant differences (p = 0.425). EBRA measurements were obtained in all cases. Acetabular bone alterations were not detected on radiological assessments. Mean cup migration was 1.67 ± 0.92 mm (range: 0.46-3.94 mm) and 1.24 ± 0.87 mm (range: 0.22-3.62 mm) in the monoblock and modular groups. The mean wear rate was 0.21 ± 0.18 mm (range: 0.00-0.70 mm) and 0.20 ± 0.13 mm (range: 0.00-0.50 mm) in the monoblock and modular groups. Both migration and wear pattern showed no significant differences (p = 0.741 and 0.243). None of the cases required revision surgery, yielding an implant survival rate of 100% in both groups. CONCLUSION: The isoelastic press-fit monoblock VEPE cup and modular metal-back HXLPE cup showed equivalent mid-term wear and cup migration. Long-term studies are required to determine the effects of modularity, isoelasticity, and polyethylene stabilization with vitamin E on cup loosening and survival rates.

OF-Pelvis classification of osteoporotic sacral and pelvic ring fractures.

OBJECTIVES: Osteoporotic fractures of the pelvis (OFP) are an increasing issue in orthopedics. Current classification systems (CS) are mostly CT-based and complex and offer only moderate to substantial inter-rater reliability (interRR) and intra-rater reliability (intraRR). MRI is thus gaining importance as a complement. This study aimed to develop a simple and reliable CT- and MRI-based CS for OFP. METHODS: A structured iterative procedure was conducted to reach a consensus among German-speaking spinal and pelvic trauma experts over 5 years. As a result, the proposed OF-Pelvis CS was developed. To assess its reliability, 28 experienced trauma and orthopedic surgeons categorized 25 anonymized cases using X-ray, CT, and MRI scans twice via online surveys. A period of 4 weeks separated the completion of the first from the second survey, and the cases were presented in an altered order. While 13 of the raters were also involved in developing the CS (developing raters (DR)), 15 user raters (UR) were not deeply involved in the development process. To assess the interRR of the OF-Pelvis categories, Fleiss' kappa (κF) was calculated for each survey. The intraRR for both surveys was calculated for each rater using Kendall's tau (τK). The presence of a modifier was calculated with κF for interRR and Cohen's kappa (κC) for intraRR. RESULTS: The OF-Pelvis consists of five subgroups and three modifiers. Instability increases from subgroups 1 (OF1) to 5 (OF5) and by a given modifier. The three modifiers can be assigned alone or in combination. In both surveys, the interRR for subgroups was substantial: κF = 0.764 (Survey 1) and κF = 0.790 (Survey 2). The interRR of the DR and UR was nearly on par (κF Survey 1/Survey 2: DR 0.776/0.813; UR 0.748/0.766). The agreement for each of the five subgroups was also strong (κF min.-max. Survey 1/Survey 2: 0.708-0.827/0.747-0.852). The existence of at least one modifier was rated with substantial agreement (κF Survey 1/Survey 2: 0.646/0.629). The intraRR for subgroups showed almost perfect agreement (τK = 0.894, DR: τK = 0.901, UR: τK = 0.889). The modifier had an intraRR of κC = 0.684 (DR: κC = 0.723, UR: κC = 0.651), which is also considered substantial. CONCLUSION: The OF-Pelvis is a reliable tool to categorize OFP with substantial interRR and almost perfect intraRR. The similar reliabilities between experienced DRs and URs demonstrate that the training status of the user is not important. However, it may be a reliable basis for an indication of the treatment score.

Two-year results of vertebral body stenting for the treatment of traumatic incomplete burst fractures.

PURPOSE: Vertebral body stenting (VBS) was developed to prevent loss of reduction after balloon deflation during kyphoplasty. The aim of this study is the radiological and clinical mid-term evaluation of traumatic incomplete burst fractures treated by vertebral body stenting. MATERIAL AND METHODS: This retrospective study included patients with traumatic thoracolumbar incomplete burst fractures treated with VBS between 2009 and 2010. The outcome was evaluated with the visual analogue pain scale (VAS), the Oswestry Disability Score (ODI), the SF-36 Health Survey and radiologically assessed. RESULTS: Eighteen patients with an average age of 74.8 years were treated with VBS. Twelve were female and six were male. Two years after the operation the ODI and SF-36 showed a moderate limitation of daily activities and quality of life without neurological deficits. VBS restored the vertebral kyphosis by 3.2° and segmental kyphosis by 5°. A minor sintering was observed at follow-up losing 0.8° vertebral kyphosis and 2.1° segmental kyphosis correction. Two asymptomatic cement leakages were detected. CONCLUSION: VBS provides clinical outcomes comparable with BKP. The stent allows a reconstruction of the anterior column with reduced subsequent loss of correction.

[Disproportionately increased incidence of proximal femoral fractures in a level one trauma center : Epidemiological analysis from 2016 to 2022]. / Überproportional angestiegene Inzidenz proximaler Femurfrakturen in einem Level-One-Traumazentrum : Epidemiologische Analyse von 2016 bis 2022.

BACKGROUND: Proximal femoral fractures represent the most frequent fracture entity in Germany accounting for more than 20% of all fractures. According to a decision of the Federal Joint Committee from 2019, proximal femoral fractures also have to be surgically treated within 24 h. In order to quantify a subjectively perceived increase in workload in trauma surgery at a supraregional trauma center, a retrospective analysis of the number of surgically treated proximal femoral fractures was performed. Proximal femoral fractures were chosen due to their high incidence and homogeneous treatment. METHODS: Using ICD-10 codes, all surgically treated proximal femoral fractures from 2016 to 2022, including the patient's zip code, were retrieved from the database of the trauma center. RESULTS: The number of surgically treated proximal femoral fractures doubled from 2016 to 2022. The highest increase (60%) was recorded from 2020 to 2022. Heat maps show an increase in the catchment area radius as well. CONCLUSION: When compared (inter)nationally, a disproportionate increase in the amount of surgically treated proximal femoral fractures was recorded at the trauma center studied. The increase of the catchment area radius and the number of patients treated in the urban area show that less and less hospitals participate in emergency treatment. Possible explanations are a lack of resources aggravated by the recent COVID-19 pandemic and a lack of qualified personnel, interface problems between the federal states or the strict requirements of the Federal Joint Committee in the treatment of proximal femoral fractures. It must be assumed that there is a clearly increased workload for all professions involved in the trauma center investigated, although the infrastructure has remained unchanged.

Proximal humeral fractures in children - controversies in decision making.

BACKGROUND: Proximal humeral fractures in children are rare and usually treated non-operatively, especially in children younger than ten. The decision between operative and non-operative treatment is mostly based on age and fracture angulation. In the current literature, diverging recommendations regarding fracture angulation that is still tolerable for non-operative treatment can be found. Besides, there is no consensus on how fracture angulation should be determined. This study aimed to determine whether leading experts in pediatric trauma surgery in Germany showed agreement concerning the measurement of fracture angulation, deciding between operative and non-operative treatment, and choosing a treatment modality. METHODS: Twenty radiographs showing a proximal humeral fracture and the patient's age were assessed twice by twenty-two senior members of the "Section of Pediatric Traumatology of the German Association for Trauma Surgery". Experts determined the fracture angulation and chose between several operative and non-operative treatment modalities. The mean of individual standard deviations was calculated to estimate the accuracy of single measurements for fracture angulation. Besides Intra-Class Correlation and Fleiss' Kappa coefficients were determined. RESULTS: For fracture angulation, experts showed moderate (ICC = 0.60) interobserver and excellent (ICC = 0.90) intraobserver agreement. For the treatment decision, there was fair (Kappa = 0.38) interobserver and substantial (Kappa = 0.77) intraobserver agreement. Finally, experts preferred ESIN over K-wires for operative and a Gilchrist over a Cuff/Collar for non-operative treatment. CONCLUSIONS: Firstly, there is a need for consensus among experts on how fracture angulation in PHFs in children should be reliably determined. Our data indicate that choosing one method everybody agrees to use could be more helpful than using the most sophisticated. However, the overall importance of fracture angulation should also be critically discussed. Finally, experts should agree on treatment algorithms that could translate into guidelines to standardize the care and perform reliable outcome studies. LEVEL OF EVIDENCE: III.

Bucket-Handle Meniscal Tears Might Not Be an Urgency: The Time to Meniscus Repair Does Not Seem to Affect the Mid-Term Outcome-A Retrospective Study of Sixty Tears with a Mean Follow-Up of 6 Years.

Background: Bucket-handle meniscal tears are mostly treated arthroscopically. However, there is no clear evidence as to whether the time to surgery impacts the outcome and whether or not lesions should be treated urgently. Methods: Sixty patients were interviewed about the current status of their knee with a mean follow-up of 6.1 years (SD = 3.5). Forty-one patients underwent meniscus repair, and fifteen patients received partial resections. The primary outcome was the rate of reoperation after meniscus repair. Secondary outcomes were pain at rest and during exercise, return to sports, and Tegner and Lysholm scores. Results: The average time to surgery was 14.4 days, with no significant impact of surgical timing on the rate of reoperation. Furthermore, no significant differences were found in pain levels, return to sports, or Tegner and Lysholm scores based on the timing of surgery. Conclusions: In our cohort, the time to surgery was not a prognostic factor for the reoperation rate or postoperative outcome in repairing bucket-handle meniscal tears. Therefore, arthroscopic repair should not be performed in an emergency setting but conducted after careful planning by experienced arthroscopy surgeons. Regarding the return to sports, postoperative factors such as rehabilitation protocols or surgical techniques could be more important than the time to surgery.

Functional outcomes after intramedullary nailing (C-Nail®) of severe calcaneal fractures with mean follow-up of 36 months.

PURPOSE: Calcaneal fractures (CFs) are rare but potentially debilitating injuries. Apart from the open, far lateral or sinus tarsi approach, operative treatment can be performed minimally invasive and percutaneously with intramedullary nailing. In this study, we sought to investigate the functional outcome of severe CFs treated with the C-Nail® implant. METHODS: Twenty-two CFs (9 × Sanders III and 8 × Sanders IV), operated between 2016 and 2019, were followed up with a mean duration of 36 (± 11) months. The AOFAS score, pre- and postoperative Böhler angles, wound healing disorders, and patient-reported outcome measures (PROMs) like pain levels and return to work/sport levels were assessed. RESULTS: The mean AOFAS score was 72.0 (± 9.8). Four patients sustained wound healing disorders, yet no implant-associated surgical revision was required. Fifty percent of patients were pain-free within 1 year. Within 1 year, about 50% of the patients could return to sports, and about 80% of the patients could return to work. PROMs and functional results align with those from other implants reported in the literature. CONCLUSION: Intramedullary nailing of severe CFs with the C-Nail® implant can be considered a safe treatment alternative that yields acceptable results at mid-terms.

Do we need to fix the anterior fracture component in insufficiency fractures of the pelvis? A biomechanical comparison on an FFP type IIIc fracture in an osteoporotic pelvic bone model.

There is a growing understanding of the specific characteristics of insufficiency fractures of the pelvis and of general requirements for the treatment of affected patients with focus on early mobilization and effective pain reduction as the main goals of therapy. While there is consensus on the significance of achieving stability of the dorsal pelvic ring structures there is still an open discussion about the potential benefits of additional stabilization of an anterior fracture component. Within a biomechanical test setup, two established methods of dorsal fracture fixation were tested under axial loading (25-1200 N; 1000 test cycles) on an explicit osteoporotic bone model (n = 32) with a standardized FFP type IIIc fracture with and without additional fixation of the anterior fracture component. Dorsal fixation was performed with and long and a short 7.3 mm cannulated screw in S1 in one group (n = 16), and a trans sacral bar with an additional short 7.3 mm cannulated screw in S1 in the other group (n = 16). Half of the samples received a 7.3 mm cannulated retrograde transpubic screw for anterior fixation. The fixation with the trans sacral bar and the additional anterior screw fixation showed the highest rate of stability (p = 0.0014), followed by the double SI-screw fixation with stabilization of the anterior fracture (p = 0.0002). During testing, we observed the occurrence of new sacral fractures contralateral to the initial fracture in 22/32 samples. The results let us assume that stabilization of an additional anterior fracture component relevantly improves the stability of the entire ring construct and might prevent failure of the dorsal stabilization or further fracture progression.

The Controversial Definition of Normal Toe Alignment.

"Normal" and "abnormal" are frequently used in surgical planning and to evaluate surgical results of the forefoot. However, there is no objectifiable value of metatarsophalangeal angles (MTPAs) 2-5 in the dorsoplantar (DP) view with which to objectively evaluate lesser toe alignment. We aimed to determine which angles are considered to be "normal" by orthopedic surgeons and radiologists. Thirty anonymized radiographs of feet were submitted twice in randomized order to determine the respective MTPAs 2-5. After six weeks, the anonymized radiographs and photographs of the same feet without apparent affiliation were presented again. The terms "normal," "borderline normal," and "abnormal" were assigned by the observers. Viewers considered MTP-2 alignment from 0° to -20° to be normal, and below -30° abnormal; MTP-3, 0° to -15° to be normal and below -30° abnormal; MTP-4, 0° to -10° normal and below -20° abnormal. Between 5° valgus and 15° varus was the range of MTP-5 recognized as normal. High intra-observer but low interobserver reliability with overall low correlation of clinical and radiographic aspects was observed. The assessment of the terms "normal" or "abnormal" are subject to a high degree of variation. Therefore, these terms should be used cautiously.

A new 3D-printed polylactic acid-bioglass composite for bone tissue engineering induces angiogenesis in vitro and in ovo.

Large bone defects such as those that occur after trauma or resections due to cancer still are a challenge for surgeons. Main challenge in this area is to find a suitable alternative to the gold-standard therapy, which is highly risky, and a promising option is to use biomaterials manufactured by 3D printing. In former studies, we demonstrated that the combination of polylactic acid (PLA) and bioglass (BG) resulted in a stable 3D-printable material, and porous and finely structured scaffolds were printed. These scaffolds exhibited osteogenic and anti-inflammatory properties. This 3D-printed material fulfills most of the requirements described in the diamond concept of bone healing. However, the question remains as to whether it also meets the requirements concerning angiogenesis. Therefore, the aim of this study was to analyze the effects of the 3D-printed PLA-BG composite material on angiogenesis. In vitro analyses with human umbilical vein endothelial cells (HUVECs) showed a positive effect of increasing BG content on viability and gene expression of endothelial markers. This positive effect was confirmed by an enhanced vascular formation analyzed by Matrigel assay and chicken chorioallantoic membrane (CAM) assay. In this work, we demonstrated the angiogenic efficiency of a 3D-printed PLA-BG composite material. Recalling the osteogenic potential of this material demonstrated in former work, we manufactured a mechanically stable, 3D-printable, osteogenic and angiogenic material, which could be used for bone tissue engineering.

Bone Sialoprotein Immobilized in Collagen Type I Enhances Angiogenesis In Vitro and In Ovo.

Bone fracture healing is a multistep process, including early immunological reactions, osteogenesis, and as a key factor, angiogenesis. Molecules inducing osteogenesis as well as angiogenesis are rare, but hold promise to be employed in bone tissue engineering. It has been demonstrated that the bone sialoprotein (BSP) can induce bone formation when immobilized in collagen type I, but its effect on angiogenesis still has to be characterized in detail. Therefore, the aim of this study was to analyse the effects of BSP immobilized in a collagen type I gel on angiogenesis. First, in vitro analyses with endothelial cells (HUVECs) were performed detecting enhancing effects of BSP on proliferation and gene expression of endothelial markers. A spheroid model was employed confirming these results. Finally, the inducing impact of BSP-collagen on vascular density was proved in a yolk sac membrane assay. Our results demonstrate that BSP is capable of inducing angiogenesis and confirm that collagen type I is the optimal carrier for this protein. Taking into account former results, and literature showing that BSP also induces osteogenesis, one can hypothesize that BSP couples angiogenesis and osteogenesis, making it a promising molecule to be used in bone tissue regeneration.

The effect of losartan on the development of post-traumatic joint stiffness in a rat model.

Post-traumatic joint stiffness (PTJS) is accompanied by a multidimensional disturbance of joint architecture. Pharmacological approaches represent promising alternatives as the traumatic nature of current therapeutic standards may lead to PTJS' progression. Losartan is an auspicious candidate, as it has demonstrated an antifibrotic effect in other organs. Forty-eight Sprague Dawley rats were randomized into equally sized losartan or control groups. After a standardized knee trauma, the joint was immobilized for either 2 weeks (n = 16), 4 weeks (n = 16) or 4 weeks with re-mobilization for an additional 4 weeks (n = 16). Pharmacotherapy with losartan or placebo (30 mg/kg/day) was initiated on the day of trauma and continued for the entire course. Joint contracture was measured alongside histological and molecular biological assessments. There were no significant biomechanical changes in joint contracture over time, comparing short-term (2 weeks) with long-term losartan therapy (4 weeks). However, comparing the formation of PTJS with that of the control, there was a trend toward improvement of joint mobility of 10.5° (p 0.09) under the influence of losartan. During the re-mobilization phase, no significant effect of losartan on range of motion (ROM) was demonstrated. At a cellular level, losartan significantly reduced myofibroblast counts by up to 72 % (4 weeks, p ≤ 0.001) without effecting the capsular configuration. Differences in expression levels of profibrotic factors (TGF-ß, CTGF, Il-6) were most pronounced at week 4. The antifibrotic properties of losartan are not prominent enough to completely prevent the development of PTJS after severe joint injury.

Biomechanical effect of graded minimal-invasive decompression procedures on lumbar spinal stability.

INTRODUCTION: Decompression surgery represents the standard operative treatment for lumbar spinal stenosis, but this procedure is often combined with fusion surgery. It is still discussed whether minimal-invasive decompression procedures are sufficient and if they compromise spinal stability as well. The aim of this study was to analyze the effects of different minimal-invasive decompression procedures on the range of motion (ROM) of the decompressed and adjacent segments under preload conditions. METHODS: Fourteen fresh frozen human cadaver lumbar spines (L2-L5) were tested in a spinal testing device with a moment of 7.5 N m in flexion/extension, lateral bending and rotation with and without a preload. The ROM of the decompressed segment L3/4 and the adjacent segments L2/L3 and L4/L5 was measured intact and after creating a gradual defect with resection of the interspinous ligament (ISL), bilateral undercutting decompression, detachment of the supraspinous ligament (SSL) and bilateral medial facetectomy. RESULTS: The resection of the ISL had no significant effect on the ROM of all segments. Undercutting decompression showed a significant increase in the ROM of all segments during flexion/extension and lateral bending. The detachment of the SSL caused a significant increase of ROM during flexion/extension in the instrumented and adjacent segments. After bilateral medial facetectomy, a decrease of ROM was observed in all directions of motion except flexion/extension with preload. CONCLUSIONS: The results support minimal-invasive procedures for the preservation of spinal stability. Therefore, surgeons can determine which grade of decompression procedure can be performed in the individual patient without requiring additional fusion to maintain spinal stability.

Pleiotropic Long-Term Effects of Atorvastatin on Posttraumatic Joint Contracture in a Rat Model.

The antifibrotic effect of atorvastatin has already been demonstrated in several organ systems. In the present study, a rat model was used to investigate the effect of atorvastatin on posttraumatic joint contracture. Forty-eight Sprague Dawley rats were equally randomized into an atorvastatin group and a control group. After initial joint trauma, knee joints were immobilized for intervals of 2 weeks (n = 16) or 4 weeks (n = 16) or immobilized for 4 weeks with subsequent remobilization for another 4 weeks (n = 16). Starting from the day of surgery, animals received either atorvastatin or placebo daily. After euthanasia at week 2, 4 or 8, joint contracture was determined, histological examinations were performed, and gene expression was assessed. The results suggest that the joint contracture was primarily arthrogenic. Atorvastatin failed to significantly affect contracture formation and showed a reduction in myofibroblast numbers to 98 ± 58 (control: 319 ± 113, p < 0.01) and a reduction in joint capsule collagen to 60 ± 8% (control: 73 ± 9%, p < 0.05) at week 2. Gene expression of α-smooth muscle actin (α-SMA), collagen type I, transforming growth factor ß1 (TGF-ß1) and interleukin-6 (IL-6) was not significantly affected by atorvastatin. Atorvastatin decreases myofibroblast number and collagen deposition but does not result in an improvement in joint mobility.

Pilot Study and Preliminary Results of Biodegradable Intramedullary Nailing of Forearm Fractures in Children.

(1) Background: Diaphyseal forearm fractures are a common injury in children and adolescents. When operative treatment is needed, elastic stable intramedullary nailing (ESIN) is the most common surgical procedure. Although there is no clear evidence, hardware removal after fracture healing is performed in many patients. Often, the primary minimal invasive incision needs to be widened during implant removal. In order to decrease the burden of care of pediatric fractures, significant efforts were made to develop biodegradable implants, which make hardware removal unnecessary. Our study will conduct an observational trial on the clinical use of the Activa IM-Nail™ in forearm fractures in children between 3 and 13 years of age. The objective of this trial is to evaluate the risks and benefits of the Activa IM-Nail™. Among other objectives, the rate of refracture will be determined. (2) Methods: An international Europe-based, multicenter, prospective, single-arm, open-label study will be performed to ascertain the rate of refracture and to determine the subjective benefits of Activa IM-Nail™ for patients, parents and other caregivers. The study will include clinical follow-up including early post-operative complication, radiographs until bony healing and an additional follow-up after 1 year. At this stage, preliminary results and early complications on 76 patients are analyzed in this study and presented. (3) Results: As of April 2022, 76 patients were enrolled as per study protocol. There were 31 girls (40.8%) and 45 boys (59.2%). The mean age at the time of inclusion was 8.9 years (±2.4 years). The mean operation time was 58.9 ± 22.9 min (range, 15-119 min). The mean follow-up time was 8.9 ± 5.1 months (range, 0.2-18.6). Up to now, one refracture has occurred in one child falling from a height of about one meter 7 months after index surgery (1/76; 1.3%). (4) Conclusion: The research project assesses the safety and effectiveness of Activa IM-Nails™ as part of the surgical treatment of dislocated forearm fractures in children in the context of a PMCF study. The use of Activa IM-Nails™ with regard to various objectives, including postoperative complications and refracture rate, seems to be equal to the standard titan ESIN procedure compared to the literature. Preliminary results are encouraging and are made available.

Biomechanical effect of different interspinous devices on lumbar spinal range of motion under preload conditions.

INTRODUCTION: Interspinous devices are used as an alternative to the current gold standard treatment, decompressive surgery with or without fusion, for lumbar spinal stenosis. They are supposed to limit extension and expand the spinal canal and foramen at the symptomatic level, but still allow lateral bending and axial rotation in the motion segment. The aim of the present study is the biomechanical evaluation of the change in the range of motion of the affected and adjacent segments following implantation of different interspinous devices under load in all directions of motion. METHOD: Eight fresh frozen human cadaver lumbar spines (L2-L5) were tested in a spinal testing device with a moment of 7.5 nm in flexion/extension, lateral bending and rotation with and without a preload (follower load of 400 N). The ROM was measured after implantation of Aperius (Kyphon, Mannheim), In-Space (Synthes, Umkirch), X-Stop (Tikom, Fürth) and Coflex (Paradigm Spine, Wurmlingen) into the segment L3/L4. RESULTS: All interspinous devices caused a significant reduction in extension of the instrumented segment without significantly affecting the other directions of motion. The flexion was reduced by all implants only when the follower load was applied. All devices caused a higher ROM of the whole spine during lateral bending and rotation. CONCLUSION: The actual evaluated interspinous devices led to a significant reduction in ROM during flexion-extension, but to a significant increase in ROM for the whole specimen (L2-L5) during lateral bending and rotation, which could increase the risk of adjacent segment degeneration.

How does spinal canal decompression and dorsal stabilization affect segmental mobility? A biomechanical study.

INTRODUCTION: When decompression of the lumbar spinal canal is performed, segmental stability might be affected. Exactly which anatomical structures can thereby be resected without interfering with stability, and when, respectively how, additional stabilization is essential, has not been adequately investigated so far. The present investigation describes kinetic changes in a surgically treated motion segment as well as in its adjacent segments. MATERIAL AND METHODS: Segmental biomechanical examination of nine human lumbar cadaver spines (L1 to L5) was performed without preload in a spine-testing apparatus by means of a precise, ultrasound-guided measuring system. Thus, samples consisting of four free motion segments were made available. Besides measurements in the native (untreated) spine specimen further measurements were done after progressive resection of dorsal elements like lig. flavum, hemilaminectomy, laminectomy and facetectomy. The segment was then stabilised by means of a rigid system (ART((R))) and by means of a dynamic, transpedicularly fixed system (Dynesys((R))). RESULTS: For the analysis, range of motion (ROM) values and separately viewed data of the respective direction of motion were considered in equal measure. A very high reproducibility of the individual measurements could be verified. In the sagittal and frontal plane, flavectomy and hemilaminectomy did not achieve any relevant change in the ROM in both directions. This applies to the segment operated on as well as to the adjacent segments examined. Resection of the facet likewise does not lead to any distinct increase of mobility in the operated segment as far as flexion and right/left bending is concerned. In extension a striking increase in mobility of more than 1degree compared to the native value can be perceived in the operated segment. Stabilization with the rigid and dynamic system effect an almost equal reduction of flexion/extension and right/left bending. In the adjacent segments, a slightly higher mobility is to be noted for rigid stabilization than for dynamic stabilisation. A linear regression analysis shows that in flexion/extension monosegmental rigid stabilisation is compensated predominantly in the first cranial adjacent segment. In case of a dynamic stabilisation the compensation is distributed among the first and second cranial, and by 20% in the caudal adjacent segment. SUMMARY: Monosegmental decompression of the lumbar spinal canal does not essentially destabilise the motion segment during in vitro conditions. Regarding rigid or dynamic stabilisation, the ROM does not differ within the operated segment, but the distribution of the compensatory movement is different.

Biomechanical testing of different posterior fusion devices on lumbar spinal range of motion.

BACKGROUND: Recent minimal-invasive posterior fusion devices are supposed to provide stability and obtain fusion in combination with interbody cages in the instrumented segment. The aim of the present study is to evaluate the primary stability of two minimal-invasive posterior prototypes compared to an established spinous process plate and standard pedicle screw instrumentation. METHODS: Seven fresh frozen human cadaver lumbar spines (L2-L5) were tested in a spinal testing device with a moment of 7.5 Nm. Spinal stability was determined as mean range of motion (RoM) in the segment L3/L4 during extension-flexion, lateral bending and axial rotation. The RoM was measured during five conditions: 1. intact; 2. working prototype composed of an interspinous device and process plates; 3. an established spinous process fixation device 4. working prototype of facet fixation and 5. pedicle screw fixation. FINDINGS: All devices caused a significant reduction of RoM during extension-flexion. The RoM during lateral bending was significantly reduced to 37% (of intact) by pedicle screws and 68% by facet fixation prototype. During axial rotation the RoM was significantly reduced to 52% by pedicle screws and to 86% by facet fixation prototype. The other devices had no significant influence on RoM during lateral bending and axial rotation. INTERPRETATION: The facet fixation prototype provided less primary stability compared to pedicle screws, but had significant advantages over spinous process fixation techniques. The results encourage further testing of this implant as a minimal-invasive approach for posterior fixation.

Misdiagnosis of Thoracolumbar Posterior Ligamentous Complex Injuries and Use of Radiographic Parameter Correlations to Improve Detection Accuracy.

STUDY DESIGN: Retrospective study. PURPOSE: To evaluate radiological parameters as indicators for posterior ligamentous complex (PLC) injuries in the case of limited availability of magnetic resonance imaging. OVERVIEW OF LITERATURE: Traumatic thoracolumbar spinal fractures with PLC injuries can be misdiagnosed on X-rays or computed tomography scans. This study aimed to retrospectively assess unrecognized PLC injuries and evaluate radiographic parameters as indicators of PLC injuries requiring surgery. METHODS: In total, 314 patients with type A and type B2 fractures who underwent surgical treatment between 2001 and 2010 were included. The frequency of misdiagnosis was reassessed, and radiographic parameters were evaluated and correlated. RESULTS: The average age of the patients was 51.8 years. There were 225 type A3/A4 and 89 type B2 fractures; 39 of the type B2 fractures (43.8%) had been misdiagnosed as type A fractures. Type B fractures presented with a significantly higher kyphotic wedge angle and Cobb angle and a lower sagittal index (SI) than type A fractures. In addition, the normalized interspinous distance was higher in type B2 fractures. The significant mathematical indicators for PLC injuries were as follows: Cobb angle+kyphotic wedge angle >29°; Cobb angle2 >170°; and vertebral angle/SI >25. CONCLUSIONS: The results demonstrated that PLC injuries are frequently misdiagnosed. Correlations between certain radiological parameters associated with PLC injuries can be useful indicators of the presence of such injuries requiring surgery.