Differential Inhibitory Receptor Expression on T Cells Delineates Functional Capacities in Chronic Viral Infection.

Inhibitory receptors have been extensively described for their importance in regulating immune responses in chronic infections and cancers. Blocking the function of inhibitory receptors such as PD-1, CTLA-4, 2B4, Tim-3, and LAG-3 has shown promise for augmenting CD8 T cell activity and boosting pathogen-specific immunity. However, the prevalence of inhibitory receptors on CD4 T cells and their relative influence on CD4 T cell functionality in chronic HIV infection remains poorly described. We therefore determined and compared inhibitory receptor expression patterns of 2B4, CTLA-4, LAG-3, PD-1, and Tim-3 on virus-specific CD4 and CD8 T cells in relation to their functional T cell profile. In chronic HIV infection, inhibitory receptor distribution differed markedly between cytokine-producing T cell subsets with, gamma interferon (IFN-γ)- and tumor necrosis factor alpha (TNF-α)-producing cells displaying the highest and lowest prevalence of inhibitory receptors, respectively. Blockade of inhibitory receptors differentially affected cytokine production by cells in response to staphylococcal enterotoxin B stimulation. CTLA-4 blockade increased IFN-γ and CD40L production, while PD-1 blockade strongly augmented IFN-γ, interleukin-2 (IL-2), and TNF-α production. In a Friend retrovirus infection model, CTLA-4 blockade in particular was able to improve control of viral replication. Together, these results show that inhibitory receptor distribution on HIV-specific CD4 T cells varies markedly with respect to the functional subset of CD4 T cells being analyzed. Furthermore, the differential effects of receptor blockade suggest novel methods of immune response modulation, which could be important in the context of HIV vaccination or therapeutic strategies.IMPORTANCE Inhibitory receptors are important for limiting damage by the immune system during acute infections. In chronic infections, however, their expression limits immune system responsiveness. Studies have shown that blocking inhibitory receptors augments CD8 T cell functionality in HIV infection, but their influence on CD4 T cells remains unclear. We assessed the expression of inhibitory receptors on HIV-specific CD4 T cells and their relationship with T cell functionality. We uncovered differences in inhibitory receptor expression depending on the CD4 T cell function. We also found differences in functionality of CD4 T cells following blocking of different inhibitory receptors, and we confirmed our results in a Friend virus retroviral model of infection in mice. Our results show that inhibitory receptor expression on CD4 T cells is linked to CD4 T cell functionality and could be sculpted by blockade of specific inhibitory receptors. These data reveal exciting possibilities for the development of novel treatments and immunotherapeutics.

Correlation between Chiral Modifier Adsorption and Enantioselectivity in Hydrogenation Catalysis.

Infrared absorption spectroscopy performed in situ at the solid-liquid interface revealed that the adsorption on platinum supported catalysts of 1-(1-naphthyl)-ethylamine, which is used as a chiral modifier in hydrogenation catalysis, occurs through the amine group, not the aromatic ring as is widely believed. Comparisons were performed against a set of related modifier compounds with targeted substitutions to help identify the key moiety involved in the adsorption. It was determined that neither naphthalene-based modifiers without amine groups nor those with tertiary amine moieties are capable of adsorbing on the metal surface to any significant extent. A direct correlation was also found between the ability of the amines to adsorb on the platinum surface and their performance as chiral modifiers that impart enantioselectivity to the hydrogenation of α-keto esters such as ethyl pyruvate.

Aquatic biofouling prevention by electrically charged nanocomposite polymer thin film membranes.

Electrically conductive polymer-nanocomposite (ECPNC) tight nanofiltration (NF) thin film membranes were demonstrated to have biofilm-preventing capabilities under extreme bacteria and organic material loadings. A simple route to the creation and application of these polyamide-carbon nanotube thin films is also reported. These thin films were characterized with SEM and TEM as well as FTIR to demonstrate that the carbon nanotubes are embedded within the polyamide and form ester bonds with trimesoyl chloride, one of the monomers of polyamide. These polymer nanocomposite thin film materials boast high electrical conductivity (∼400 S/m), good NaCl rejection (>95%), and high water permeability. To demonstrate these membranes' biofouling capabilities, we designed a cross-flow water filtration vessel with insulated electrical leads connecting the ECPNC membranes to an arbitrary waveform generator. In all experiments, conducted in highly bacterially contaminated LB media, flux tests were run until fluxes decreased by 45 ± 3% over initial flux. Biofilm-induced, nonreversible flux decline was observed in all control experiments and a cross-flow rinse with the feed solution failed to induce flux recovery. In contrast, flux decrease for the ECPNC membranes with an electric potential applied to their surface was only caused by deposition of bacteria rather than bacterial attachment, and flux was fully recoverable following a short rinse with the feed solution and no added cleaning agents. The prevention of biofilm formation on the ECPNC membranes was a long-term effect, did not decrease with use, and was highly reproducible.

Reduction of nitrite and nitrate on nano-dimensioned FeS.

The reaction of nitrite (NO2(-)) and nitrate (NO3(-)) on nanometer-sized FeS particles was investigated in alkaline (initial pH = 10.3) solutions at reaction temperatures of 22, 70, and 120 °C using in situ attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and fluorescence spectroscopy that allowed an analysis of adsorbate complexation on the FeS and reaction product in the aqueous phase, respectively. ATR-FTIR showed that NO was a surface-bound intermediate on FeS during its exposure to NO2(-) at all three reaction temperatures. Ammonia/ammonium (NH3/NH4(+)) product was also produced when FeS was exposed to NO2(-) at the 70 °C and 120 °C reaction temperatures. Activation of NO3(-) to form surface-bound NO was experimentally observed to occur at 120 °C on FeS, but not at the lower reaction temperatures. Furthermore, NH3/NH4(+) product in the aqueous phase was only present during the reaction of FeS with NO3(-) at the highest temperature used in this study.

Reduction of nitrite and nitrate to ammonium on pyrite.

An important constraint on the formation of the building blocks of life in the Hadean is the availability of small, activated compounds such as ammonia (NH(3)) relative to its inert dinitrogen source. Iron-sulfur particles and/or mineral surfaces have been implicated to provide the catalytic active sites for the reduction of dinitrogen. Here we provide a combined kinetic, spectroscopic, and computational modeling study for an alternative source of ammonia from water soluble nitrogen oxide ions. The adsorption of aqueous nitrite (NO(2)(-)) and nitrate (NO(3)(-)) on pyrite (FeS(2)) and subsequent reduction chemistry to ammonia was investigated at 22°C, 70°C, and 120°C. Batch geochemical and in situ Attenuated Total Reflection - Fourier Transform Infrared (ATR-FTIR) spectroscopy experiments were used to determine the reduction kinetics to NH(3) and to elucidate the identity of the surface complexes, respectively, during the reaction chemistry of NO(2)(-) and NO(3)(-). Density functional theory (DFT) calculations aided the interpretation of the vibrational data for a representative set of surface species. Under the experimental conditions used in this study, we detected the adsorption of nitric oxide (NO) intermediate on the pyrite surface. NH(3) production from NO(2)(-) occurred at 70 and 120°C and from NO(3)(-) occurred only at 120°C.

Synthesis of tetranuclear, four-coordinate manganese clusters with "pinned butterfly" geometry formed by metal-mediated N-N bond cleavage in diphenylhydrazine.

The preparation of four-coordinate tetramanganese-amide-hydrazide clusters is described. Reaction of Mn(NR(2))(2) (R = SiMe(3)) with N,N'-diphenylhydrazine resulted in the formation of a black intermediary mixture that converted to a four-coordinate tetranuclear "pinned butterfly" cluster, Mn(4)(µ(3)-N(2)Ph(2))(2)(µ-N(2)Ph(2))(µ-NHPh)(2)(THF)(4). This compound was isolated in ~90% yield and identified by single-crystal X-ray diffraction analysis. In pyridine, the THF ligands were replaced, giving the pyridyl complex Mn(4)(µ(3)-N(2)Ph(2))(2)(µ-N(2)Ph(2))(µ-NHPh)(2)(py)(4). Charge counting considerations indicate that the clusters had gained two protons and two electrons in addition to the formative fragments. Isolation of the black mixture was achieved by extraction techniques from a reaction with a decreased loading of hydrazine run at low temperatures with decreased solvent polarity. The black mixture was characterized by FT-IR, UV-vis, and (1)H NMR spectroscopy. In addition, an isolable, colorless dimer, Mn(2)(µ-NHPh)(2)(NR(2))(2)(THF)(2), was present in the mixture and identified by single-crystal X-ray diffraction. These intermediates are discussed in light of possible mechanisms for formation of the tetranuclear cluster.

Polymorphic Phase Control of RDX-Based Explosives.

The polymorphic phase of 1,3,5-trinitro-1,3,5-triazine (RDX) was examined as a function of mass loading, solvent, and sample deposition technique. When RDX was deposited at a high mass loading, the vibrational modes in the obtained Raman spectra were indicative of concomitant polymorphism as both the α-RDX and ß-RDX phases were present. At low mass loadings, only ß-RDX was observed regardless of solvent when using the drop cast crystallization method. However, α-RDX (the thermodynamically stable polymorphic phase observed with visible quantities of the explosive) was observed when RDX deposits were dry transferred. Observation of α-RDX was independent of the initial mass loading or the initial deposition solvent when using the dry transfer methodology. These data indicate that the use of the dry transfer preparation method can be used to successfully prepare RDX-based test articles with the α-RDX phase regardless of the solvent used to initially dissolve the RDX, the initial deposition technique, or the mass loading.