Spatial distension variations are associated with focal atherosclerotic plaques.

BACKGROUND: Alterations in arterial absolute distension (AD) and relative distension (RD) in the common carotid artery (CCA), as observed by ultrasound, may relate to atherosclerotic processes in a nearby vascular segment. The main objective of the study was to establish to what extent these mechanical vascular alterations relate to carotid bulb stenosis. METHODS: The AD, RD and their interrecording variation (Delta AD and Delta RD), representing the spatial inhomogeneity of AD and RD, were evaluated in 308 CCA and associated with the degree of bulb stenosis. RESULTS: The mechanical CCA parameters were marginally correlated to the degree of ipsilateral (r = -0.14 for AD and r = -0.28 for RD) and contralateral stenosis (r = -0.21 for AD and r = -0.27 for RD). However, Delta AD (r = 0.54; p < 0.001) and Delta RD (r = 0.59; p < 0.001) were significantly correlated to ipsilateral stenosis, independent of age, gender and pulse pressure. CONCLUSIONS: The indices of CCA arterial stiffness are weakly associated with ipsilateral bulb stenosis, but their interrecording variation is a good indicator for atherosclerotic alterations in the carotid bulb. The results indicate that a focal atherosclerotic lesion is associated with modifications in the dynamic characteristics of a nearby vascular segment.

Noninvasive detection of intimal xanthoma using combined ultrasound, strain rate and photoacoustic imaging.

BACKGROUND AND MOTIVATION: The structure, composition and mechanics of carotid artery are good indicators of early progressive atherosclerotic lesions. The combination of three imaging modalities (ultrasound, strain rate and photoacoustic imaging) which could provide corroborative information about the named arterial properties could enhance the characterization of intimal xanthoma. METHODS: The experiments were performed using a New Zealand white rabbit model of atherosclerosis. The aorta excised from an atherosclerotic rabbit was scanned ex vivo using the three imaging techniques: (1) ultrasound imaging of the longitudinal section: standard ultrasound B-mode (74Hz frame rate); (2) strain rate imaging: the artery was flushed with blood and a 1.5Hz physiologic pulsation was induced, while the ultrasound data were recorded at higher frame rate (296Hz); (3) photoacoustic imaging: the artery was irradiated with nanosecond pulsed laser light of low fluence in the 1210-1230nm wavelength range and the photoacoustic data was recorded at 10Hz frame rate. Post processing algorithms based on cross-correlation and optical absorption variation were implemented to derive strain rate and spectroscopic photoacoustic images, respectively. RESULTS: Based on the spatio-temporal variation in displacement of different regions within the arterial wall, strain rate imaging reveals differences in tissue mechanical properties. Additionally, spectroscopic photoacoustic imaging can spatially resolve the optical absorption properties of arterial tissue and identify the location of lipid pools. CONCLUSIONS: The study demonstrates that ultrasound, strain rate and photoacoustic imaging can be used to simultaneously evaluate the structure, the mechanics and the composition of atherosclerotic lesions to improve the assessment of plaque vulnerability.

Clinical benefits of integrating cardiac and vascular models.

INTRODUCTION: Recent advances in computational methods and medical imaging techniques have enabled non-invasive exploration of cardiovascular pathologies, from cardiac level to complex arterial networks. The potential of cardiac and vascular modeling in guiding and monitoring therapies could be further extended through the integration of the two systems. AREAS COVERED: This review includes advances in methods for cardiac electromechanics and vascular flow simulations. The results of a literature search depicting the state of the art in cardiac and vascular modeling are reviewed. The paper goes on to address the benefits and challenges of combined cardiovascular modeling, highlighting the relevance of specific cardiovascular features and implementation. Various alternative approaches and insights on future directions are presented and analyzed with respect to their applicability to clinical practice. EXPERT OPINION: The article has emerged from the exploration of currently available cardiac and vascular mathematical tools and their corresponding clinical application. The summarized analysis suggests that future efforts should be aimed at developing more accurate and patient-specific mathematical models integrating cardiac and vascular functions to enhance the knowledge of cardiovascular pathologies.

Applicability of body surface potential map in computerized optimization of biventricular pacing.

Biventricular pacing (BVP) could be improved by identifying the patient-specific optimal electrode positions. Body surface potential map (BSPM) is a non-invasive technique for obtaining the electrophysiology and pathology of a patient. The study proposes the use of BSPM as input for an automated non-invasive strategy based on a personalized computer model of the heart, to identify the patient pathology and specific optimal treatment with BVP devices. The anatomy of a patient suffering from left bundle branch block and myocardial infarction is extracted from a series of MR data sets. The clinical measurements of BSPM are used to parameterize the computer model of the heart to represent the individual pathology. Cardiac electrophysiology is simulated with ten Tusscher cell model and excitation propagation is calculated with adaptive cellular automaton, at physiological and pathological conduction levels. The optimal electrode configurations are identified by evaluating the QRS error between healthy and pathology case with/without pacing. Afterwards, the simulated ECGs for optimal pacing are compared to the post-implantation clinically measured ECGs. Both simulation and clinical optimization methods identified the right ventricular (RV) apex and the LV posterolateral regions as being the optimal electrode configuration for the patient. The QRS duration is reduced both in measured and simulated ECG after implantation with 20 and 14%, respectively. The optimized electrode positions found by simulation are comparable to the ones used in hospital. The similarity in QRS duration reduction between measured and simulated ECG signals indicates the success of the method. The computer model presented in this work is a suitable tool to investigate individual pathologies. The personalized model could assist therapy planning of BVP in patients with congestive heart failure. The proposed method could be used as prototype for further clinically oriented investigations of computerized optimization of biventricular pacing.

Efficiency of timing delays and electrode positions in optimization of biventricular pacing: a simulation study.

Electrode positions and timing delays influence the efficacy of biventricular pacing (BVP). Accordingly, this study focuses on BVP optimization, using a detailed 3-D electrophysiological model of the human heart, which is adapted to patient-specific anatomy and pathophysiology. The research is effectuated on ten heart models with left bundle branch block and myocardial infarction derived from magnetic resonance and computed tomography data. Cardiac electrical activity is simulated with the ten Tusscher cell model and adaptive cellular automaton at physiological and pathological conduction levels. The optimization methods are based on a comparison between the electrical response of the healthy and diseased heart models, measured in terms of root mean square error (E(RMS)) of the excitation front and the QRS duration error (E(QRS)). Intra- and intermethod associations of the pacing electrodes and timing delays variables were analyzed with statistical methods, i.e., t -test for dependent data, one-way analysis of variance for electrode pairs, and Pearson model for equivalent parameters from the two optimization methods. The results indicate that lateral the left ventricle and the upper or middle septal area are frequently (60% of cases) the optimal positions of the left and right electrodes, respectively. Statistical analysis proves that the two optimization methods are in good agreement. In conclusion, a noninvasive preoperative BVP optimization strategy based on computer simulations can be used to identify the most beneficial patient-specific electrode configuration and timing delays.

Wall irregularity rather than intima-media thickness is associated with nearby atherosclerosis.

In addition to intima-media thickness (IMT), IMT inhomogeneity may carry information about atherosclerosis progression. In 147 vascular diseased patients (mean 66 y, 48% male), we determined the carotid bulb stenosis degree based on local Doppler blood flow velocities. Common carotid artery (CCA) morphologic characteristics, i.e. IMT, IMT-inhomogeneity (intraregistration variation) and IMT uni- and bilateral intrasubject variation (DeltaIMT), were measured using multiple M-mode. Associations of morphologic characteristics, stenosis degree and Framingham score were evaluated with Pearson correlation (r) and multiple regression analysis. The IMT distributions for subjects without and with stenosis were not similar. The stenosis degree score correlated significantly to unilateral (r=0.68) and bilateral DeltaIMT (r=0.62), IMT (r=0.41) and IMT-inhomogeneity (r=0.45). The averaged IMT and IMT-inhomogeneity increased slightly for singular stenosis and abruptly for multiple stenoses. Mean uni- and bilateral DeltaIMT per stenosis degree increased linearly with this degree, reaching a correlation close to 1 (r=0.98 and r=0.97). Interestingly, the majority of the subjects with a moderate to severe bulb stenosis exhibited a carotid IMT lower than the considered critical threshold of 0.9 mm. In conclusion, although CCA is not prone to plaques, its morphologic characteristics are positively correlated with stenosis degree score and other risk scores. DeltaIMT can be more reliable derived from inter-registration rather than from intra-registration variation. In the CCA, DeltaIMT substantiates vascular alteration better than IMT.