RESUMO
Hybrid organic/inorganic materials have contributed to solve important challenges in different areas of science. One of the biggest challenges for a more sustainable society is to have active and stable catalysts that enable the transition from fossil fuel to renewable feedstocks, reduce energy consumption and minimize the environmental footprint. Here we synthesize novel hybrid materials where an amorphous oxide coating with embedded organic ligands surrounds metallic nanocrystals. We demonstrate that the hybrid coating is a powerful means to create electrocatalysts stable against structural reconstruction during the CO2 electroreduction. These electrocatalysts consist of copper nanocrystals encapsulated in a hybrid organic/inorganic alumina shell. This shell locks a fraction of the copper surface into a reduction-resistant Cu2+ state, which inhibits those redox processes responsible for the structural reconstruction of copper. The electrocatalyst activity is preserved, which would not be possible with a conventional dense alumina coating. Varying the shell thickness and the coating morphology yields fundamental insights into the stabilization mechanism and emphasizes the importance of the Lewis acidity of the shell in relation to the retention of catalyst structure. The synthetic tunability of the chemistry developed herein opens new avenues for the design of stable electrocatalysts and beyond.
RESUMO
Atomic layer deposition (ALD) is a method to grow thin metal oxide layers on a variety of materials for applications spanning from electronics to catalysis. Extending ALD to colloidally stable nanocrystals promises to combine the benefits of thin metal oxide coatings with the solution processability of the nanocrystals. However, challenges persist in applying this method, which relate to finding precursors that promote the growth of the metal oxide while preserving colloidal stability throughout the process. Herein, we introduce a colloidal ALD method to coat nanocrystals with amorphous metal oxide shells using metal and oxygen precursors that act as colloidal stabilizing ligands. Our scheme involves metal-amide precursors modified with solubilizing groups and oleic acid as the oxygen source. The growth of the oxide is self-limiting and proceeds in a layer-by-layer fashion. Our protocol is generalizable and intrinsically scalable. Potential applications in display, light detection, and catalysis are envisioned.
RESUMO
Colloidal nanocrystals (NCs) are ideal materials for a variety of applications and devices, which span from catalysis and optoelectronics to biological imaging. Organic chromophores are often combined with NCs as photoactive ligands to expand the functionality of NCs or to achieve optimal device performance. The most common methodology to introduce these chromophores involves ligand exchange procedures. Despite their ubiquitous nature, ligand exchanges suffer from a few limitations, which include reversible binding, restricted access to binding sites, and the need for purification of the samples, which can result in loss of colloidal stability. Herein, we propose a methodology to bypass these inherent issues of ligand exchange through the growth of an amorphous alumina shell by colloidal atomic layer deposition (c-ALD). We demonstrate that c-ALD creates colloidally stable composite materials, which comprise NCs and organic chromophores as photoactive ligands, by trapping the chromophores around the NC core. As representative examples, we functionalize semiconductor NCs, which include PbS, CsPbBr3, CuInS2, Cu2-xX, and lanthanide-based upconverting NCs, with polyaromatic hydrocarbons (PAH) ligands. Finally, we prove that triplet energy transfer occurs through the shell and we realize the assembly of a triplet exciton funnel structure, which cannot be obtained via conventional ligand exchange procedures. The formation of these organic/inorganic hybrid shells promises to synergistically boost catalytic and multiexcitonic processes while endowing enhanced stability to the NC core.
RESUMO
PbS semiconductor nanocrystals (NCs) have been heavily explored for infrared optoelectronics but can exhibit visible-wavelength quantum-confined optical gaps when sufficiently small (â = 1.8-2.7 nm). However, small PbS NCs traditionally exhibited very broad ensemble absorption linewidths, attributed to poor size-heterogeneity. Here, harnessing recent synthetic advances, we report photophysical measurements on PbS ensembles that span this underexplored size range. We observe that the smallest PbS NCs pervasively exhibit lower brightness and anomalously accelerated photoluminescence decays-relative to the idealized photophysical models that successfully describe larger NCs. We find that effects of residual ensemble size-heterogeneity are insufficient to explain our observations, so we explore plausible processes that are intrinsic to individual nanocrystals. Notably, the anomalous decay kinetics unfold, surprisingly, over hundreds-of-nanosecond timescales. These are poorly matched to effects of direct carrier trapping or fine-structure thermalization but are consistent with non-radiative recombination linked to a dynamic surface. Thus, the progressive enhancement of anomalous decay in the smallest particles supports predictions that the surface plays an outsized role in exciton-phonon coupling. We corroborate this claim by showing that the anomalous decay is significantly remedied by the installation of a rigidifying shell. Intriguingly, our measurements show that the anomalous aspect of these kinetics is insensitive to temperature between T = 298 and 77 K, offering important experimental constraint on possible mechanisms involving structural fluctuations. Thus, our findings identify and map the anomalous photoluminescence kinetics that become pervasive in the smallest PbS NCs and call for targeted experiments and theory to disentangle their origin.
RESUMO
Superlattice formation afforded by metal halide perovskite nanocrystals has been a phenomenon of interest due to the high structural order induced in these self-assemblies, an order that is influenced by the surface chemistry and particle morphology of the starting building block material. In this work, we report on the formation of superlattices from aluminum oxide shelled CsPbBr3 perovskite nanocrystals where the oxide shell is grown by colloidal atomic layer deposition. We demonstrate that the structural stability of these superlattices is preserved over 25 days in an inert atmosphere and that colloidal atomic layer deposition on colloidal perovskite nanocrystals yields structural protection and an enhancement in photoluminescence quantum yields and radiative lifetimes as opposed to gas phase atomic layer deposition on pre-assembled superlattices or excess capping group addition. Structural analyses found that shelling resulted in smaller nanocrystals that form uniform supercrystals. These effects are in addition to the increasingly static capping group chemistry initiated where oleic acid is installed as a capping ligand directly on aluminum oxide. Together, these factors lead to fundamental observations that may influence future superlattice assembly design.
RESUMO
Nanocrystal (NC)-sensitized triplet-fusion upconversion is a rising strategy to convert long-wavelength, incoherent light into higher-energy output photons. Here, we chart the photophysics of tailor-functionalized CdSe NCs to understand energy transfer to surface-anchored transmitter ligands, which can proceed via correlated exciton transfer or sequential carrier hops. Varying NC size, we observe a pronounced acceleration of energy transfer (from kquench = 0.0096 ns-1 ligand-1 to 0.064 ns-1 ligand-1) when the barrier to hole-first sequential transfer is lowered from 100 ± 25 meV to 50 ± 25 meV. This acceleration is 5.1× the expected effect of increased carrier wave function leakage, so we conclude that sequential transfer becomes kinetically dominant under the latter conditions. Last, transient photoluminescence shows that NC band-edge and trap states are comparably quenched by functionalization (up to â¼98% for sequential transfer) and exhibit matched dynamics for t > 300 ns, consistent with a dynamic quasi-equilibrium where photoexcitations can ultimately be extracted even when a carrier is initially trapped.
RESUMO
Indium phosphide quantum dots (InP QDs) are a promising example of Restriction of Hazardous Substances directive (RoHS)-compliant light-emitting materials. However, they suffer from low quantum yield and instability upon processing under ambient conditions. Colloidal atomic layer deposition (c-ALD) has been recently proposed as a methodology to grow hybrid materials including QDs and organic/inorganic oxide shells, which possess new functions compared to those of the as-synthesized QDs. Here, we demonstrate that ZnO shells can be grown on InP QDs obtained via two synthetic routes, which are the classical sylilphosphine-based route and the more recently developed aminophosphine-based one. We find that the ZnO shell increases the photoluminescence emission only in the case of aminophosphine-based InP QDs. We rationalize this result with the different chemistry involved in the nucleation step of the shell and the resulting surface defect passivation. Furthermore, we demonstrate that the ZnO shell prevents degradation of the InP QD suspension under ambient conditions by avoiding moisture-induced displacement of the ligands from their surface. Overall, this study proposes c-ALD as a methodology for the synthesis of alternative InP-based core@shell QDs and provides insight into the surface chemistry that results in both enhanced photoluminescence and stability required for application in optoelectronic devices and bioimaging.
RESUMO
Photon upconversion is a strategy to generate high-energy excitations from low-energy photon input, enabling advanced architectures for imaging and photochemistry. Here, we show that ultra-small PbS nanocrystals can sensitize red-to-blue triplet-fusion upconversion with a large anti-Stokes shift (ΔE = 1.04 eV), and achieve max-efficiency upconversion at near-solar fluences (I th = 220 mW cm-2) despite endothermic triplet sensitization. This system facilitates the photo-initiated polymerization of methyl methacrylate using only long-wavelength light (λ exc: 637 nm); a demonstration of nanocrystal-sensitized upconversion photochemistry. Time-resolved spectroscopy and kinetic modelling clarify key loss channels, highlighting the benefit of long-lifetime nanocrystal sensitizers, but revealing that many (48%) excitons that reach triplet-extracting carboxyphenylanthracene ligands decay before they can transfer to free-floating acceptors-emphasizing the need to address the reduced lifetimes that we determine for molecular triplets near the nanocrystal surface. Finally, we find that the inferred thermodynamics of triplet sensitization from these ultra-small PbS quantum dots are surprisingly favourable-completing an advantageous suite of properties for upconversion photochemistry-and do not vary significantly across the ensemble, which indicates minimal effects from nanocrystal heterogeneity. Together, our demonstration and study of red-to-blue upconversion using ultra-small PbS nanocrystals in a quasi-equilibrium, mildly endothermic sensitization scheme offer design rules to advance implementations of triplet fusion, especially where large anti-Stokes wavelength shifts are sought.
RESUMO
Kesterite Cu2ZnSnS4 (k-CZTS) nanocrystals have received attention for their tunable optoelectronic properties, as well as the earth abundance of their constituent atoms. However, the phase-pure synthesis of these quaternary NCs is challenging due to their polymorphism, as well as the undesired formation of related binary and ternary impurities. A general synthetic route to tackle this complexity is to pass through intermediate template nanocrystals that direct subsequent cation exchange toward the desired quaternary crystalline phase, particularly those that are thermodynamically disfavored or otherwise synthetically challenging. Here, working within this model multinary system, we achieve control over the formation of three binary copper sulfide polymorphs, cubic digenite (Cu1.8S), hexagonal covellite (CuS), and monoclinic djurleite (Cu1.94S). Controlled experiments with Cu0 seeds show that selected binary phases can be favored by the identity and stoichiometry of the sulfur precursor alone under otherwise comparable reaction conditions. We then demonstrate that the nature of the Cu2-xS template dictates the final polymorph of the CZTS nanocrystal products. Through digenite, the cation exchange reaction readily yields the k-CZTS phase due to its highly similar anion sublattice. Covellite nanocrystals template the k-CZTS phase but via major structural rearrangement to digenite that requires elevated temperatures in the absence of a strong reducing agent. In contrast, we show that independently synthesized djurleite nanorods template the formation of the wurtzite polymorph (w-CZTS) but with prominent stacking faults in the final product. Applying this refined understanding to the standard one-pot syntheses of k- and w-CZTS nanocrystals, we identify that these reactions are each effectively templated by binary intermediates formed in situ, harnessing their properties to guide the overall synthesis of phase-pure quaternary materials. Our results provide tools for the careful development of tailored nanocrystal syntheses in complex polymorphic systems.
RESUMO
The use of excess PbCl2 in the synthesis of PbS nanocrystals has become a convenient route to produce narrow-line-width infrared emitters. However, these materials have found limited adoption in optoelectronic devices-even compared to PbS nanocrystals prepared with lead oleate. Here, using both transmission electron microscopy and small-angle X-ray scattering, we show that excess PbCl2 results in larger-diameter PbS nanocrystals for the same excitonic features, which is consistent with the formation of an intrinsic insulating shell. We observe further differences in excess-lead-chloride nanocrystals consistent with a shell, including lattice strain and smaller Stokes shifts for intermediate sizes (â: 4.8-6.8 nm) that match the passivation/rigidification predicted for a chloride-terminate surface. Our results clarify and rationalize the divergent properties of PbS nanocrystals prepared using different synthetic methodologies, give guidance for device implementation, and offer a new target for synthetic control.
RESUMO
We demonstrate that a structurally rigid, weakly coupled molecular dimer can replace traditional monomeric annihilators for triplet fusion upconversion (TUC) in solution by observing emitted photons (λ = 540 nm) from a norbornyl-bridged tetracene homodimer following excitation of a triplet sensitizer at λ = 730 nm. Intriguingly, steady-state spectroscopy, kinetic simulations, and Stern-Volmer quenching experiments show that the dimer exhibits qualitatively different photophysics than its parent monomer: it is less effective at diffusion-mediated triplet exciton transfer, but it fuses extracted triplets more efficiently. Our results support the development of composite triplet-fusion platforms that go beyond diffusion-mediated triplet extraction, ultimately circumventing the concentration dependence of solution-phase TUC.