FAIR data enabling new horizons for materials research.

The prosperity and lifestyle of our society are very much governed by achievements in condensed matter physics, chemistry and materials science, because new products for sectors such as energy, the environment, health, mobility and information technology (IT) rely largely on improved or even new materials. Examples include solid-state lighting, touchscreens, batteries, implants, drug delivery and many more. The enormous amount of research data produced every day in these fields represents a gold mine of the twenty-first century. This gold mine is, however, of little value if these data are not comprehensively characterized and made available. How can we refine this feedstock; that is, turn data into knowledge and value? For this, a FAIR (findable, accessible, interoperable and reusable) data infrastructure is a must. Only then can data be readily shared and explored using data analytics and artificial intelligence (AI) methods. Making data 'findable and AI ready' (a forward-looking interpretation of the acronym) will change the way in which science is carried out today. In this Perspective, we discuss how we can prepare to make this happen for the field of materials science.

Prediction of Strong Solvatochromism in a Molecular Photocatalyst.

Based on quantum chemical calculations, we predict strong solvatochromism in a light-driven molecular photocatalyst for hydrogen generation, that is we show that the electronic and optical properties of the photocatalyst strongly depend on the solvent it is dissolved in. Our calculations in particular indicate a solvent-dependent relocation of the highest occupied molecular orbital (HOMO). Ground-state density functional theory and linear response time-dependent density functional theory calculations were applied in order to investigate the influence of implicit solvents on the structural, electronic and optical properties of a molecular photocatalyst. Only at high dielectric constants of the solvent, is the HOMO located at the metal center of the photosensitizer, whereas at low dielectric constants the HOMO is centered at the metal atom of the catalytically active complex. We elucidate the electronic origins of this strong solvatochromic effect and sketch the consequences of these insights for the use of photocatalysts in different environments.

Ab Initio Simulations of Water/Metal Interfaces.

Structures and processes at water/metal interfaces play an important technological role in electrochemical energy conversion and storage, photoconversion, sensors, and corrosion, just to name a few. However, they are also of fundamental significance as a model system for the study of solid-liquid interfaces, which requires combining concepts from the chemistry and physics of crystalline materials and liquids. Particularly interesting is the fact that the water-water and water-metal interactions are of similar strength so that the structures at water/metal interfaces result from a competition between these comparable interactions. Because water is a polar molecule and water and metal surfaces are both polarizable, explicit consideration of the electronic degrees of freedom at water/metal interfaces is mandatory. In principle, ab initio molecular dynamics simulations are thus the method of choice to model water/metal interfaces, but they are computationally still rather demanding. Here, ab initio simulations of water/metal interfaces will be reviewed, starting from static systems such as the adsorption of single water molecules, water clusters, and icelike layers, followed by the properties of liquid water layers at metal surfaces. Technical issues such as the appropriate first-principles description of the water-water and water-metal interactions will be discussed, and electrochemical aspects will be addressed. Finally, more approximate but numerically less demanding approaches to treat water at metal surfaces from first-principles will be briefly discussed.

Stability, electronic properties and CO adsorption properties of bimetallic PtAg/Pt(111) surfaces.

Aiming at a better fundamental understanding of the chemistry of bimetallic PtAg/Pt(111) surfaces, we have investigated the stability, electronic properties and CO adsorption properties of bimetallic PtAg surfaces, including pseudomorphic Ag film covered Pt(111) surfaces and PtxAg1-x/Pt(111) monolayer surface alloys, using periodic density functional theory calculations. The data provide detailed insights into the relative stabilities of different surface configurations, as indicated by their formation enthalpies and surface energies, and changes in their electronic properties, i.e., in the projected local densities of states and shifts in the d-band center. The adsorption properties of different Ptn ensembles were systematically tested using CO as a probe molecule. In addition to electronic ligand and strain effects, we were particularly interested in the role of different adsorption sites and of the local COad coverage, given by the number of CO molecules per Pt surface atom in the Ptn ensemble. Different from PdAg surfaces, variations in the adsorption energy with adsorption sites and with increasing local coverage are small up to one COad per Pt surface atom. Finally, formation of multicarbonyl species with more than one COad per Pt surface atom was tested for separated Pt1 monomers and can be excluded at finite temperatures. General trends and aspects are derived by comparison with comparable data for PdAg bimetallic surfaces. Fundamental insights relevant for applications of bimetallic Pt catalysts, specifically PtAg catalysts, are briefly discussed.

Solution of the structure of the high-coverage CO layer on the Ru(0001) surface-A combined study by density functional theory and scanning tunneling microscopy.

Structures formed by dense CO adsorption layers can provide information about the balance between molecule-surface and molecule-molecule interactions. However, in many cases, the structure models are not clear. Using density functional theory (DFT) and scanning tunneling microscopy (STM), we have investigated the high-coverage CO layer on the Ru(0001) surface. Previous investigations by low-energy electron diffraction (LEED) and vibrational spectroscopy led to conflicting results about the structure. In the present study, 88 models with coverages between 0.58 and 0.77 monolayers have been analyzed by DFT. The most stable structures consist of small, compact CO clusters with an internal pseudo 1×1 structure. The CO molecules in the cluster centers occupy on-top sites in an upright position, whereas the molecules farther outside are slightly shifted from these sites and tilted outward. STM data of the CO-saturated surface at low temperatures, corresponding to a coverage of 0.66 monolayers, show a quasi-hexagonal pattern of features with an internal hexagonal fine structure. Simulated images based on the cluster model agree with the experimental data. It is concluded that the high-coverage CO layer consists of the close-packed clusters predicted by DFT as the most stable structure elements. In the experiment, the sizes and shapes of the clusters vary. However, the arrangement is not random but follows defined tiling rules. The structure remains ordered, almost up to room temperature. The LEED data are re-interpreted on the basis of the Fourier transforms of the STM data, solving the long-standing conflict about the structure.

Coupling of photoactive transition metal complexes to a functional polymer matrix*.

Conductive polymers represent a promising alternative to semiconducting oxide electrodes typically used in dye-sensitized cathodes as they more easily allow a tuning of the physicochemical properties. This can then also be very beneficial for using them in light-driven catalysis. In this computational study, we address the coupling of Ru-based photosensitizers to a polymer matrix by combining two different first-principles electronic structure approaches. We use a periodic density functional theory code to properly account for the delocalized nature of the electronic states in the polymer. These ground state investigations are complemented by time-dependent density functional theory simulations to assess the Franck-Condon photophysics of the present photoactive hybrid material based on a molecular model system. Our results are consistent with recent experimental observations and allow to elucidate the light-driven redox chemical processes - eventually leading to charge separation - in the present functional hybrid systems with potential application as photocathode materials.

Vacancy assisted diffusion on single-atom surface alloys.

Bimetallic surfaces can exhibit an improved catalytic activity through tailoring the concentration and/or the arrangement of the two metallic components. However, in order to be catalytically active, the active bimetallic surface structure has to be stable under operating conditions. Typically, structural changes in metals occur via vacancy diffusion. Based on the first-principles determination of formation energies and diffusion barriers we have performed kinetic Monte-Carlo (kMC) simulations to analyse the (meta-)stability of PtRu/Ru(0001), AgPd/Pd(111), PtAu/Au(111) and InCu/Cu(100) surface alloys. In a first step, here we consider single-atom alloys together with one vacancy per simulation cell. We will present results of the time evolution of these structures and analyse them in terms of the interaction between the constituents of the bimetallic surface.

Model Studies on the Formation of the Solid Electrolyte Interphase: Reaction of Li with Ultrathin Adsorbed Ionic-Liquid Films and Co3 O4 (111) Thin Films.

In this work we aim towards the molecular understanding of the solid electrolyte interphase (SEI) formation at the electrode electrolyte interface (EEI). Herein, we investigated the interaction between the battery-relevant ionic liquid (IL) 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BMP-TFSI), Li and a Co3 O4 (111) thin film model anode grown on Ir(100) as a model study of the SEI formation in Li-ion batteries (LIBs). We employed mostly X-ray photoelectron spectroscopy (XPS) in combination with dispersion-corrected density functional theory calculations (DFT-D3). If the surface is pre-covered by BMP-TFSI species (model electrolyte), post-deposition of Li (Li+ ion shuttle) reveals thermodynamically favorable TFSI decomposition products such as LiCN, Li2 NSO2 CF3 , LiF, Li2 S, Li2 O2 , Li2 O, but also kinetic products like Li2 NCH3 C4 H9 or LiNCH3 C4 H9 of BMP. Simultaneously, Li adsorption and/or lithiation of Co3 O4 (111) to Lin Co3 O4 takes place due to insertion via step edges or defects; a partial transformation to CoO cannot be excluded. Formation of Co0 could not be observed in the experiment indicating that surface reaction products and inserted/adsorbed Li at the step edges may inhibit or slow down further Li diffusion into the bulk. This study provides detailed insights of the SEI formation at the EEI, which might be crucial for the improvement of future batteries.

Water structures on a Pt(111) electrode from ab initio molecular dynamic simulations for a variety of electrochemical conditions.

A structural analysis of solvating water layers on a Pt(111) electrode has been performed based on extensive ab initio molecular dynamics simulations. We have emulated different electrochemical conditions by varying the concentration of hydrogen ions in the water layers, which effectively corresponds to a variation in the electrode potential. We present a detailed analysis of the arrangement and orientation of the water molecules and also address their mobility in the solvation layer.

The Dynamic Nature of CO Adlayers on Pt(111) Electrodes.

CO adlayers on Pt(111) electrode surfaces are an important electrochemical system and of great relevance to electrocatalysis. The potential-dependent structure and dynamics of these adlayers are complex and still controversial, especially in the CO pre-oxidation regime. We here employ in situ high-speed scanning tunneling microscopy for studying the surface phase behavior in CO-saturated 0.1 m H2 SO4 on the millisecond time scale. At potentials near the onset of CO pre-oxidation local fluctuations in the (2×2)-CO adlayer are observed, which increase towards more positive potentials. Above 0.20 V (vs. Ag/AgCl), this leads to an adlayer where COad apparently reside on every top site, but still exhibit a (2×2) superstructure modulation. We interpret this observation as a dynamic effect, caused by a small number of highly mobile point defects in the (2×2)-CO adlayer. As shown by density functional theory calculations, the CO lattice near such defects relaxes into a local (1×1) arrangement, which can rapidly propagate across the surface. This scenario, where a static (2×2) COad sublattice coexists with a highly dynamic sublattice of partially occupied top sites, explains the pronounced COad surface mobility during electrooxidation.

Toward an Atomic-Scale Understanding of Electrochemical Interface Structure and Dynamics.

For the knowledged-based development of electrochemical processes, a better fundamental understanding of the interfaces between electrodes and electrolytes is necessary. This requires insight into the interface structure and dynamics on the atomic-scale, including that of the liquid electrolyte in the near-surface region, i.e., in the inner and outer part of the electrochemical double layer. This perspective describes current studies of simple and well-defined electrochemical interfaces by first-principles electronic structure calculations and in situ structure-sensitive methods. It is shown that these experimental and theoretical studies are now approaching a level, where they can operate on the same footing, making direct comparison of the obtained results feasible. Using selected examples, progress in clarifying the structure and dynamics of the double layer, of adsorbed species on electrode surfaces, and of initial steps in electrochemical phase formation processes is discussed.

Viewpoint: Atomic-Scale Design Protocols toward Energy, Electronic, Catalysis, and Sensing Applications.

Nanostructured materials are essential building blocks for the fabrication of new devices for energy harvesting/storage, sensing, catalysis, magnetic, and optoelectronic applications. However, because of the increase of technological needs, it is essential to identify new functional materials and improve the properties of existing ones. The objective of this Viewpoint is to examine the state of the art of atomic-scale simulative and experimental protocols aimed to the design of novel functional nanostructured materials, and to present new perspectives in the relative fields. This is the result of the debates of Symposium I "Atomic-scale design protocols towards energy, electronic, catalysis, and sensing applications", which took place within the 2018 European Materials Research Society fall meeting.

Influence of electric fields on metal self-diffusion barriers and its consequences on dendrite growth in batteries.

Based on the results of periodic density functional theory calculations, we have recently proposed that the height of self-diffusion barriers can serve as a descriptor for dendrite growth in batteries [M. Jäckle et al., Energy Environ. Sci. 11, 3400 (2018)]. However, in the determination of the self-diffusion barriers, the electrochemical environment has not been taken into account. Still, due to the presence of electrical double layers at electrode/electrolyte interfaces, strong electric fields can be present close to the interfacial region. In a first step toward including the electrochemical environment, we have calculated barriers for terrace-diffusion on lithium, magnesium, and silver surfaces and across-step self-diffusion on lithium in the presence of electric fields. Whereas the electric field effect is more pronounced on a stepped surface than on flat terraces, overall we find a negligible influence of electric fields on self-diffusion barriers which we explain by the good screening properties of metals.

Adsorption of Ultrathin Ethylene Carbonate Films on Pristine and Lithiated Graphite and Their Interaction with Li.

Aiming at a better understanding of the solid-electrolyte interphase formation in Li-ion batteries, we have investigated the interaction of ultrathin films of ethylene carbonate (EC), which is a key solvent of battery electrolytes, with pristine and lithiated highly oriented pyrolytic graphite (HOPG) and with postdeposited Li. Employing X-ray and ultraviolet photoelectron spectroscopy as well as Fourier transform infrared spectroscopy under ultrahigh-vacuum conditions, in combination with density functional theory (DFT)-based calculations, we find that EC adsorbs molecularly intact on pristine HOPG in the entire temperature range between 80 K and desorption at 200 K. Features in the ultraviolet photoelectron spectra could be related to the molecular orbitals of EC obtained from DFT calculations, and a similar adsorption/desorption behavior is obtained also on lithiated HOPG. In contrast, stepwise postdeposition of ∼0.5 and one monolayer of Li0 on a preadsorbed EC adlayer leads not only to stabilization of Li+/Liδ+ at the surface, possibly as adsorbed Li+(EC) n species, but also to EC decomposition, forming products such as Li2CO3, ROCO2Li (CH2OCO2Li)2, and Li2O. Consequences on the electronic surface properties and on the stabilization of the resulting adlayer are discussed. Upon annealing up to room temperature, some residual Li-containing decomposition products remain on the surface, which is considered as the initial stage of the solid|electrolyte interphase formation at the electrode|electrolyte interface.

The electric double layer at metal-water interfaces revisited based on a charge polarization scheme.

The description of electrode-electrolyte interfaces is based on the concept of the formation of an electric double layer. This concept was derived from continuum theories extended by introducing point charge distributions. Based on ab initio molecular dynamics simulations, we analyze the electric double layer in an approach beyond the point charge scheme by instead assessing charge polarizations at electrochemical metal-water interfaces from first principles. We show that the atomic structure of water layers at room temperature leads to an oscillatory behavior of the averaged electrostatic potential. We address the relation between the polarization distribution at the interface and the extent of the electric double layer and subsequently derive the electrode potential from the charge polarization.

Reaction energetics of hydrogen on Si(100) surface: A periodic many-electron theory study.

We report on a many-electron wavefunction theory study for the reaction energetics of hydrogen dissociation on the Si(100) surface. We demonstrate that quantum chemical wavefunction based methods using periodic boundary conditions can predict chemically accurate results for the activation barrier and the chemisorption energy in agreement with experimental findings. These highly accurate results for the reaction energetics enable a deeper understanding of the underlying physical mechanism and make it possible to benchmark widely used density functional theory methods.

Structure formation and surface chemistry of ionic liquids on model electrode surfaces-Model studies for the electrode | electrolyte interface in Li-ion batteries.

Ionic liquids (ILs) are considered as attractive electrolyte solvents in modern battery concepts such as Li-ion batteries. Here we present a comprehensive review of the results of previous model studies on the interaction of the battery relevant IL 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([BMP]+[TFSI]-) with a series of structurally and chemically well-defined model electrode surfaces, which are increasingly complex and relevant for battery applications [Ag(111), Au(111), Cu(111), pristine and lithiated highly oriented pyrolytic graphite (HOPG), and rutile TiO2(110)]. Combining surface science techniques such as high resolution scanning tunneling microscopy and X-ray photoelectron spectroscopy for characterizing surface structure and chemical composition in deposited (sub-)monolayer adlayers with dispersion corrected density functional theory based calculations, this work aims at a molecular scale understanding of the fundamental processes at the electrode | electrolyte interface, which are crucial for the development of the so-called solid electrolyte interphase (SEI) layer in batteries. Performed under idealized conditions, in an ultrahigh vacuum environment, these model studies provide detailed insights on the structure formation in the adlayer, the substrate-adsorbate and adsorbate-adsorbate interactions responsible for this, and the tendency for chemically induced decomposition of the IL. To mimic the situation in an electrolyte, we also investigated the interaction of adsorbed IL (sub-)monolayers with coadsorbed lithium. Even at 80 K, postdeposited Li is found to react with the IL, leading to decomposition products such as LiF, Li3N, Li2S, LixSOy, and Li2O. In the absence of a [BMP]+[TFSI]- adlayer, it tends to adsorb, dissolve, or intercalate into the substrate (metals, HOPG) or to react with the substrate (TiO2) above a critical temperature, forming LiOx and Ti3+ species in the latter case. Finally, the formation of stable decomposition products was found to sensitively change the equilibrium between surface Li and Li+ intercalated in the bulk, leading to a deintercalation from lithiated HOPG in the presence of an adsorbed IL adlayer at >230 K. Overall, these results provide detailed insights into the surface chemistry at the solid | electrolyte interface and the initial stages of SEI formation at electrode surfaces in the absence of an applied potential, which is essential for the further improvement of future Li-ion batteries.

Surface configuration and wettability of nickel(oxy)hydroxides: a first-principles investigation.

This article explores the wetting behavior of ß-type nickel hydroxide, ß-Ni(OH)2, and nickel oxyhydroxide, ß-NiOOH, by means of first-principles calculations. Water is found to interact weakly with ß-Ni(OH)2(001), but strongly with ß-NiOOH(001). As unveiled with the use of ab initio molecular dynamics simulations, surface water layers at ß-NiOOH(001) show a high degree of ordering correlated with a large surface polarization effect. In comparison, interfacial water at ß-Ni(OH)2(001) exhibits enhanced disorder and higher mobility. The weak interaction of water with ß-Ni(OH)2(001) is consistent with the small dipole moment of this surface. On the surface of ß-NiOOH(001), in addition to the significantly increased surface dipole moment, unsaturated O atoms increase the number of hydrogen bonds between water molecules and the surface, resulting in strong water binding. The wettability trends found in this simulation study are consistent with experimental observations. Another theoretical observation is the increased work function of ß-NiOOH(001) relative to ß-Ni(OH)2(001) that agrees with experimental results reported in the literature.

Challenges in bimetallic multilayer structure formation: Pt growth on Cu monolayers on Ru(0001).

In a joint experimental and theoretical study, we investigated the formation and morphology of PtCu/Ru(0001) bimetallic surfaces grown at room and higher temperatures under UHV conditions. We obtained the PtCu/Ru(0001) surfaces by deposition of Pt atoms on a previously created Cu/Ru(0001) structure which includes only one Cu monolayer. Bimetallic surfaces prepared at different Pt coverages are investigated using STM imaging, revealing the existence of reconstruction lines and Cu islands. Although primarily created Cu islands continue growing in size by increasing Pt coverage, a continuous formation of new Cu islands is observed. This leads to an atypical exponential increase of the island density as well as to an atypical behavior of the average number of atoms per island for low Pt coverages. Although coalescence of the islands is observed for high Pt coverages, the island density remains almost constant in that regime. In order to understand the trends observed in the experiments, we study the stability of these surfaces, atom adsorption, and adatom diffusion using periodic density functional theory calculations. On the basis of the experimental observations and the first-principles calculations, we suggest a model that includes exchange of Pt adatoms with Cu surface atoms, Pt and Cu adatom diffusion, and attractive (repulsive) interactions between Cu (Pt) adatoms with substitutional Pt surface atoms, which explains the main trends in island formation and growth observed in the experiment.

From single molecules to water networks: Dynamics of water adsorption on Pt(111).

The adsorption dynamics of water on Pt(111) was studied using ab initio molecular dynamics simulations based on density functional theory calculations including dispersion corrections. Sticking probabilities were derived as a function of initial kinetic energy and water coverage. In addition, the energy distribution upon adsorption was monitored in order to analyze the energy dissipation process. We find that on the water pre-covered surface the sticking probability is enhanced because of the attractive water-water interaction and the additional effective energy dissipation channels to the adsorbed water molecules. The water structures forming directly after the adsorption on the pre-covered surfaces do not necessarily correspond to energy minimum structures.