Modification of titanium implants using biofunctional nanodiamonds for enhanced antimicrobial properties.

The present study describes a novel antimicrobial surface using anodic oxidation of titanium and biofunctional detonation nanodiamonds (ND). ND have been loaded with antibiotics (amoxicillin or ampicillin) using poly(diallyldimethylammonium chloride) (PDDA). Successful conjugation with PDDA was determined by dynamic light scattering, which showed increase in the hydrodynamic diameter of ND agglomerates and shift of zeta potential towards positive values. The surface loading of amoxicillin was determined using UV-vis spectroscopy and the maximum of 44% surface loading was obtained. Biofunctional ND were immobilized by anodic oxidation within a titanium oxide layer, which was confirmed by scanning electron microscopy. The in vitro antimicrobial properties of ND suspensions were examined using Kirby-Bauer test with E. coli. Modified titanium surfaces comprising biofunctional ND were evaluated with E. coli inoculum by live/dead assay staining. Both biofunctional ND suspensions and modified titanium surfaces presented inhibition of bacteria growth and increase in bacteria lethality.

Complete genome sequence of the myxobacterium Sorangium cellulosum.

The genus Sorangium synthesizes approximately half of the secondary metabolites isolated from myxobacteria, including the anti-cancer metabolite epothilone. We report the complete genome sequence of the model Sorangium strain S. cellulosum So ce56, which produces several natural products and has morphological and physiological properties typical of the genus. The circular genome, comprising 13,033,779 base pairs, is the largest bacterial genome sequenced to date. No global synteny with the genome of Myxococcus xanthus is apparent, revealing an unanticipated level of divergence between these myxobacteria. A large percentage of the genome is devoted to regulation, particularly post-translational phosphorylation, which probably supports the strain's complex, social lifestyle. This regulatory network includes the highest number of eukaryotic protein kinase-like kinases discovered in any organism. Seventeen secondary metabolite loci are encoded in the genome, as well as many enzymes with potential utility in industry.

Efficient transfer of two large secondary metabolite pathway gene clusters into heterologous hosts by transposition.

Horizontal gene transfer by transposition has been widely used for transgenesis in prokaryotes. However, conjugation has been preferred for transfer of large transgenes, despite greater restrictions of host range. We examine the possibility that transposons can be used to deliver large transgenes to heterologous hosts. This possibility is particularly relevant to the expression of large secondary metabolite gene clusters in various heterologous hosts. Recently, we showed that the engineering of large gene clusters like type I polyketide/nonribosomal peptide pathways for heterologous expression is no longer a bottleneck. Here, we apply recombineering to engineer either the epothilone (epo) or myxochromide S (mchS) gene cluster for transpositional delivery and expression in heterologous hosts. The 58-kb epo gene cluster was fully reconstituted from two clones by stitching. Then, the epo promoter was exchanged for a promoter active in the heterologous host, followed by engineering into the MycoMar transposon. A similar process was applied to the mchS gene cluster. The engineered gene clusters were transferred and expressed in the heterologous hosts Myxococcus xanthus and Pseudomonas putida. We achieved the largest transposition yet reported for any system and suggest that delivery by transposon will become the method of choice for delivery of large transgenes, particularly not only for metabolic engineering but also for general transgenesis in prokaryotes and eukaryotes.

Safety effects of traffic lane and shoulder widths on two-lane undivided rural roads: A matched case-control study from Norway.

This study estimates the effects of lane and shoulder widths on occurrence of head-on and single-vehicle accidents on rural two-lane undivided roads in Norway while considering the differences between winter and non-winter accidents and their severity levels. A matched case-control method was applied to calculate the odds ratios for lane and shoulder width categories, while controlling for the effects of AADT and adjusting for the effects of region, speed limit, segment length, share of long vehicles in AADT and horizontal alignment. The study used a sample of 71,999 roadway segments identified in GIS and 1886 related accidents recorded by the police in five-year period. The results suggest that it is relevant to consider winter and non-winter accidents as well as severe and slight accidents separately when studying the effects of lane and shoulder widths on the occurrence of head-on and single-vehicle accidents. When examining lane and shoulder widths for all related accidents, the lane widths 1.50-2.50 m and shoulder widths 0.50-0.75 m were relatively safer than other categories on Norwegian two-lane rural undivided roads.

Metabolic engineering of Pseudomonas putida for methylmalonyl-CoA biosynthesis to enable complex heterologous secondary metabolite formation.

An operon consisting of three open reading frames, annotated in silico as methylmalonyl-CoA (mm-CoA) epimerase, mm-CoA mutase (MCM), and meaB, was identified in the sequencing project of the myxobacterium Sorangium cellulosum So ce56. This putative MCM pathway operon was subcloned from a bacterial artificial chromosome by Red/ET recombineering onto a minimal replicon derived from p15A. This plasmid was modified for integration and heterologous expression in Pseudomonas putida to enable the production of complex secondary metabolites requiring mm-CoA as precursor. Methylmalonate was identified in the recombinant P. putida strain by an analysis method based on gas chromatography/mass spectrometry. The engineered strain is able to synthesize polyketides requiring mm-CoA as an extender unit, which was demonstrated by the production of myxothiazol after integration of the biosynthetic gene cluster into the chromosome, followed by induction of expression.

Heterologous Production and Yield Improvement of Epothilones in Burkholderiales Strain DSM 7029.

The cloning of microbial natural product biosynthetic gene clusters and their heterologous expression in a suitable host have proven to be a feasible approach to improve the yield of valuable natural products and to begin mining cryptic natural products in microorganisms. Myxobacteria are a prolific source of novel bioactive natural products with only limited choices of heterologous hosts that have been exploited. Here, we describe the use of Burkholderiales strain DSM 7029 as a potential heterologous host for the functional expression of myxobacterial secondary metabolites. Using a newly established electroporation procedure, the 56 kb epothilone biosynthetic gene cluster from the myxobacterium Sorangium cellulosum was introduced into the chromosome of strain DSM 7029 by transposition. Production of epothilones A, B, C, and D was detected despite their yields being low. Optimization of the medium, introduction of the exogenous methylmalonyl-CoA biosynthetic pathway, and overexpression of rare tRNA genes resulted in an approximately 75-fold increase in the total yields of epothilones to 307 µg L-1. These results show that strain DSM 7029 has the potential to produce epothilones with reasonable titers and might be a broadly applicable host for the heterologous expression of other myxobacterial polyketide synthases and nonribosomal peptide synthetases, expediting the process of genome mining.

Heterologous expression of a myxobacterial natural products assembly line in pseudomonads via red/ET recombineering.

Natural products of microbial origin are widely used as pharmaceuticals and in agrochemistry. These compounds are often biosynthesized by multifunctional megasynthetases whose genetic engineering and heterologous expression offer considerable promise, especially if the natural hosts are genetically difficult to handle, slow growing, unculturable, or even unknown. We describe a straightforward strategy that combines the power of advanced DNA engineering (recombiogenic cloning) in Escherichia coli with the utility of pseudomonads as the heterologous host for the analysis and mutagenesis of known and unknown secondary metabolite pathways. The myxochromide S biosynthetic gene cluster from Stigmatella aurantiaca was rebuilt and engineered in E. coli to contain the elements required for expression in pseudomonads. The successful production in Pseudomonas putida, at unprecedented levels, demonstrates the feasibility of the new approach to the analysis and mutagenesis of these important pathways.

Critical variations of conjugational DNA transfer into secondary metabolite multiproducing Sorangium cellulosum strains So ce12 and So ce56: development of a mariner-based transposon mutagenesis system.

Myxobacteria increasingly gain attention as a source of bioactive natural products. The genus Sorangium produces almost half of the secondary metabolites isolated from these microorganisms. Nevertheless, genetic systems for Sorangium strains are poorly developed, which makes the identification of the genes directing natural product biosynthesis difficult. Using biparental and triparental mating, we have developed methodologies for DNA transfer from Escherichia coli via conjugation for the genome sequencing model strain So ce56 and the secondary metabolite multiproducing strain So ce12. The conjugation protocol developed for strain So ce56 is not applicable to other Sorangium strains. Crucial points for the conjugation are the ratio of E. coli and Sorangium cellulosum cells, the choice of liquid or solid medium, the time used for the conjugation process and antibiotic selection in liquid medium prior to the plating of cells. A mariner-based transposon containing a hygromycin resistance gene was generated and used as the selectable marker for S. cellulosum. The transposon randomly integrates into the chromosome of both strains. As a proof of principle, S. cellulosum So ce12 transposon mutants were screened using an overlay assay to target the chivosazole biosynthetic gene cluster.

Case-control analysis in highway safety: Accounting for sites with multiple crashes.

There is an increased interest in the use of epidemiological methods in highway safety analysis. The case-control and cohort methods are commonly used in the epidemiological field to identify risk factors and quantify the risk or odds of disease given certain characteristics and factors related to an individual. This same concept can be applied to highway safety where the entity of interest is a roadway segment or intersection (rather than a person) and the risk factors of interest are the operational and geometric characteristics of a given roadway. One criticism of the use of these methods in highway safety is that they have not accounted for the difference between sites with single and multiple crashes. In the medical field, a disease either occurs or it does not; multiple occurrences are generally not an issue. In the highway safety field, it is necessary to evaluate the safety of a given site while accounting for multiple crashes. Otherwise, the analysis may underestimate the safety effects of a given factor. This paper explores the use of the case-control method in highway safety and two variations to account for sites with multiple crashes. Specifically, the paper presents two alternative methods for defining cases in a case-control study and compares the results in a case study. The first alternative defines a separate case for each crash in a given study period, thereby increasing the weight of the associated roadway characteristics in the analysis. The second alternative defines entire crash categories as cases (sites with one crash, sites with two crashes, etc.) and analyzes each group separately in comparison to sites with no crashes. The results are also compared to a "typical" case-control application, where the cases are simply defined as any entity that experiences at least one crash and controls are those entities without a crash in a given period. In a "typical" case-control design, the attributes associated with single-crash segments are weighted the same as the attributes of segments with multiple crashes. The results support the hypothesis that the "typical" case-control design may underestimate the safety effects of a given factor compared to methods that account for sites with multiple crashes. Compared to the first alternative case definition (where multiple crash segments represent multiple cases) the results from the "typical" case-control design are less pronounced (i.e., closer to unity). The second alternative (where case definitions are constructed for various crash categories and analyzed separately) provides further evidence that sites with single and multiple crashes should not be grouped together in a case-control analysis. This paper indicates a clear need to differentiate sites with single and multiple crashes in a case-control analysis. While the results suggest that sites with multiple crashes can be accounted for using a case-control design, further research is needed to determine the optimal method for addressing this issue. This paper provides a starting point for that research.

Safety effectiveness of converting signalized intersections to roundabouts.

Roundabouts may be new builds but often are conversions from existing intersections. When contemplating the later, there is a need to estimate the safety effects of conversions. Several studies have estimated large reductions in crashes and severity; however, these results pertain mainly to conversions from unsignalized intersections. Results for conversions from signalized intersections have been less conclusive or consistent and tend to be somewhat dated. The objective of this study was to fill this void by estimating the safety effectiveness of converting signalized intersections to roundabouts. Several states helped to identify signalized intersections that were converted to roundabouts in the recent past. In total, 28 conversions were identified in the United States. The empirical Bayes (EB) method was employed in an observational before-after study to estimate the safety effects. Data from select states were also used in a cross-sectional analysis to investigate the compatibility of results from cross-sectional and before-after studies. The EB results indicated a safety benefit for converting signalized intersections to roundabouts. There were reductions in both total and injury crashes, with a larger benefit for injury crashes. Further analysis indicated that the safety benefit of roundabouts for total crashes decreased as traffic volumes increase, a result that suggests the need for the development of a crash modification function, a task for which more data would be required. The safety benefit for injury crashes was sustained across all traffic volumes. Both trends were supported by the cross-sectional analysis. Based on the analysis, it appears that roundabouts have the potential to significantly reduce crashes and severity at signalized intersections. A key aspect of the study was the estimation of the standard deviation of the distribution of the CMF in addition to the conventionally estimated standard error of the mean CMF value. For some CMFs, especially the CMFs for total crashes, the standard deviation of the distribution was larger than the standard error of the mean value of the CMF, indicating substantial variation in the treatment effect across sites.

Case-control and cross-sectional methods for estimating crash modification factors: comparisons from roadway lighting and lane and shoulder width safety effect studies.

PROBLEM: While observational before-after studies are considered the industry standard for developing crash modification factors (CMFs), there are practical limitations that may preclude their use in highway safety analysis. There is a need to explore alternative methods for estimating CMFs. METHOD: This paper employs case-control and cross-sectional analyses to estimate CMFs for fixed roadway lighting and the allocation of lane and shoulder widths. RESULTS: Based on the case-control method, the CMF for intersection lighting is 0.886, while the cross-sectional study indicates a CMF of 0.881. The CMFs developed for lane and shoulder widths are also similar when comparing the two methods. CONCLUSIONS: This paper suggests that case-control and cross-sectional studies produce consistent results if care is taken in the study design and model development. IMPACT ON INDUSTRY: Case-control and cross-sectional studies may provide a viable alternative to estimate CMFs when a before-after study is impractical due to data restrictions.

Bacterial type III polyketide synthases: phylogenetic analysis and potential for the production of novel secondary metabolites by heterologous expression in pseudomonads.

Type III polyketide synthases (PKS) were regarded as typical for plant secondary metabolism before they were found in microorganisms recently. Due to microbial genome sequencing efforts, more and more type III PKS are found, most of which of unknown function. In this manuscript, we report a comprehensive analysis of the phylogeny of bacterial type III PKS and report the expression of a type III PKS from the myxobacterium Sorangium cellulosum in pseudomonads. There is no precedent of a secondary metabolite that might be biosynthetically correlated to a type III PKS from any myxobacterium. Additionally, an inactivation mutant of the S. cellulosum gene shows no physiological difference compared to the wild-type strain which is why these type III PKS are assumed to be "silent" under the laboratory conditions administered. One type III PKS (SoceCHS1) was expressed in different Pseudomonas sp. after the heterologous expression in Escherichia coli failed. Cultures of recombinant Pseudomonas sp. harbouring SoceCHS1 turned red upon incubation and the diffusible pigment formed was identified as 2,5,7-trihydroxy-1,4-naphthoquinone, the autooxidation product of 1,3,6,8-tetrahydroxynaphthalene. The successful heterologous production of a secondary metabolite using a gene not expressed under administered laboratory conditions provides evidence for the usefulness of our approach to activate such secondary metabolite genes for the production of novel metabolites.

Posttranslational modification of myxobacterial carrier protein domains in Pseudomonas sp. by an intrinsic phosphopantetheinyl transferase.

We demonstrate the ability of Pseudomonas putida KT2440, Pseudomonas syringae pv. tomato DC3000 and Pseudomonas stutzeri DSM10701 to posttranslationally activate carrier protein (CP) domains of various polyketide synthases, nonribosomal peptide synthetases, and fatty acid synthase by their intrinsic phosphopantetheinyl transferase. The apo-form is modified to the holo-form of the CP by attaching a phosphopantetheine moiety from coenzymeA to a conserved serine residue. The coding regions of the respective domains were cloned in order to generate C-terminal fusions with intein-chitin. The constructs were subcloned into a broad host range vector and transferred into the three pseudomonad hosts. The resulting recombinant pseudomonad strains were cultivated and each fusion protein was purified by affinity chromatography. Each purified CP was analysed using MALDI/TOF for the expected mass increase. Of the seven CPs tested, six could be purified from P. putida, which was chosen as the general host strain. Out of the six domains, five were completely activated, whereas only 5% of the protein of the sixth domain was in holo-form. Four domains were also expressed in the other hosts.

Biocatalytic conversion of avermectin to 4"-oxo-avermectin: heterologous expression of the ema1 cytochrome P450 monooxygenase.

The cytochrome P450 monooxygenase Ema1 from Streptomyces tubercidicus R-922 and its homologs from closely related Streptomyces strains are able to catalyze the regioselective oxidation of avermectin into 4"-oxo-avermectin, a key intermediate in the manufacture of the agriculturally important insecticide emamectin benzoate (V. Jungmann, I. Molnár, P. E. Hammer, D. S. Hill, R. Zirkle, T. G. Buckel, D. Buckel, J. M. Ligon, and J. P. Pachlatko, Appl. Environ. Microbiol. 71:6968-6976, 2005). The gene for Ema1 has been expressed in Streptomyces lividans, Streptomyces avermitilis, and solvent-tolerant Pseudomonas putida strains using different promoters and vectors to provide biocatalytically competent cells. Replacing the extremely rare TTA codon with the more frequent CTG codon to encode Leu4 in Ema1 increased the biocatalytic activities of S. lividans strains producing this enzyme. Ferredoxins and ferredoxin reductases were also cloned from Streptomyces coelicolor and biocatalytic Streptomyces strains and tested in ema1 coexpression systems to optimize the electron transport towards Ema1.

Cloning, sequencing and disruption of a bromoperoxidase-catalase gene in Streptomyces venezuelae: evidence that it is not required for chlorination in chloramphenicol biosynthesis.

Genomic DNA libraries of Streptomyces venezuelae ISP5230 and of a mutant blocked at the chlorination step of chloramphenicol biosynthesis were probed by hybridization with a synthetic oligonucleotide corresponding to the N-terminal amino acid sequence of a bromoperoxidase-catalase purified from the wild-type strain. Hybridizing fragments obtained from the two strains were cloned and sequenced. Analysis of the nucleotide sequences demonstrated that the fragments contained the same 1449 bp open reading frame with no differences in nucleotide sequence. The deduced polypeptide encoded 483 amino acids with a calculated M(r) of 54,200; the N-terminal sequence was identical to that of the bromoperoxidase-catalase purified from wild-type S. venezuelae. Comparison of the amino acid sequence predicted for the cloned bromoperoxidase-catalase gene (bca) with database protein sequences showed a significant similarity to a group of prokaryotic and eukaryotic catalases, but none to other peroxidases or haloperoxidases. Replacement of the bca gene in the wild-type strain of S. venezuelae with a copy disrupted by insertion of a DNA fragment encoding apramycin resistance did not prevent chloramphenicol production. The results suggest that the role of the enzyme in S. venezuelae is related to its activity as a catalase rather than as a halogenating agent.

Isolation of 3' -O-acetylchloramphenicol: a possible intermediate in chloramphenicol biosynthesis.

3' -O-acetylchloramphenicol, commonly formed from chloramphenicol by resistant bacteria, has been isolated from the antibiotic-producing organism. Biosynthetic experiments suggest that it is a protected intermediate in chloramphenicol biosynthesis, implicating acetylation as a self-resistance mechanism in the producing organism.