Highly Functionalized SWCNTs with a Dopamine Derivative as a Support for Pd Nanoparticles: A Recyclable Catalyst for the Reduction of Nitro Compounds and the Heck Reaction.

Single-walled carbon nanotubes (SWCNTs) were functionalized with a dopamine derivative in which the amine group was converted to azide (dopamine azide). The direct reaction of SWCNTs and dopamine azide in o-dichlorobenzene at high temperature (160 °C) led to very highly functionalized CNTs (≈60 wt.%). Surprisingly, despite this high degree of functionalization, Raman spectroscopy detected a low disruption of the π-network of the carbonaceous support. This finding was justified by the rehybridization from sp3 to sp2 of the sidewall carbon atoms of CNTs involved in the functionalization process. Further characterization by means of different techniques such as X-ray photoelectron spectroscopy (XPS) analysis and transmission electron microscopy (TEM) allowed to shed some light on the chemical composition and morphology of the obtained material. Moreover, the estimation of the total content of phenolic units and their reducing potential after CNTs functionalization was also assessed using Folin and Ciocalteu and 2,2-diphenyl-1-picryl hydrazide (DPPH) assays. The functionalization of CNTs was exploited to immobilize palladium(II) species that were subsequently reduced with NaBH4 leading to the formation of Pd nanoparticles (NPs). The so obtained hybrid material was used as a recyclable heterogeneous catalyst for the reduction of nitro compounds and the Heck reaction.

First Evidence of Tris(catecholato)silicate Formation from Hydrolysis of an Alkyl Bis(catecholato)silicate.

The hydrolysis of 3-ammoniumpropylbis(catecholato)silicate 1, giving two different silica-based materials containing different amounts of tris(catecholato)silicate, is reported. The latter species can be formed through an attack of catechol to the silicon atom in the pentacoordinate complex, in which the silicon-carbon bond is further activated toward electrophilic proton cleavage. The Knoevenagel reaction was used as a probe in order to test the availability of functional groups on the surface of such materials.

TiO2/Ag2O immobilized on cellulose paper: A new floating system for enhanced photocatalytic and antibacterial activities.

Paper-TiO2-Ag2O floating photocatalysts were produced under mild condition and their photocatalytic activity for the degradation of aromatic amine under sunlight stimulant was investigated. Characterizations by Raman, XRD, XPS, DRS and PL confirmed the presence of TiO2 and Ag2O, and the morphology of the appended TiO2/Ag2O layer was probed by FE-SEM. The photocatalytic activity of the prepared samples was investigated by the degradation of aniline (AN) in water under simulated sun-light illumination and constrained conditions, i.e. non-stirring and non-oxygenation. The presence of Ag2O combined with TiO2 was shown to improve the resistance of paper to bacteria attack, thus increasing the durability of the photocatalyst. Thanks to its hydrophobic character, the paper-TiO2-Ag2O NPs can be employed as useful floating photocatalyst and can be reused in continuous cycles.

Supported Ionic Liquids: A Versatile and Useful Class of Materials.

Supported ionic liquids (SILs) represent a class of materials with peculiar properties and a huge potential regarding their possible applications in different fields of chemistry. Herein, we report our ongoing research about the use of SILs as support for organocatalysts, their role as catalysts themselves, and their application as support and stabilizers of palladium nanoparticles (PdNPs). The use of SILs based materials allowed achieving good results. Moreover, in some cases, after the functionalization of the catalytic species with an ion-tag moiety, a release and catch approach was employed in order to improve the catalytic activity and to facilitate the recovery of the hybrid system formed by the catalyst adsorbed onto SILs materials. All the reported examples demonstrate the versatility of such SILs materials, which can represent powerful tools able to exert a large number of functions.

Advances in Organic and Organic-Inorganic Hybrid Polymeric Supports for Catalytic Applications.

In this review, the most recent advances (2014-2016) on the synthesis of new polymer-supported catalysts are reported, focusing the attention on the synthetic strategies developed for their preparation. The polymer-supported catalysts examined will be organic-based polymers and organic-inorganic hybrids and will include, among others, polystyrenes, poly-ionic liquids, chiral ionic polymers, dendrimers, carbon nanotubes, as well as silica and halloysite-based catalysts. Selected examples will show the synthesis and application in the field of organocatalysis and metal-based catalysis both for non-asymmetric and asymmetric transformations.

Fullerene-ionic-liquid conjugates: a new class of hybrid materials with unprecedented properties.

A modular approach has been followed for the synthesis of a series of fullerene-ionic-liquid (IL) hybrids in which the number of IL moieties (two or twelve), anion, and cation have been varied. The combination of C60 and IL give rise to new unique properties in the conjugates such as solubility in water, which was higher than 800 mg mL(-1) in several cases. In addition, one of the C60 -IL hybrids has been employed for the immobilization of palladium nanoparticles through ion exchange followed by reduction with sodium borohydride. Surprisingly, during the reduction several carbon nanostructures were formed that comprised nano-onions and nanocages with few-layer graphene sidewalls, which have been characterized by means of thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy/energy-dispersive X-ray analysis (SEM-EDAX), and high-resolution transmission electron microscopy (HRTEM). Finally, the material thus obtained was successfully applied as catalyst in Suzuki and Mizoroki-Heck reactions in a concentration of just 0.2 mol %. In the former process it was recyclable for five runs with no loss in activity.

Low-loading asymmetric organocatalysis.

Asymmetric organocatalysis is now recognized as the third pillar of asymmetric synthesis. Recent years have witnessed increasing interest towards the use of highly active and stereoselective organocatalysts. This critical review documents the advances in the development of chiral organocatalysts which are systematically used in ≤3 mol% loading in all the sub-areas of the field, namely aminocatalysis, Brønsted acids and bases, Lewis acids and bases, hydrogen bond-mediated catalysis, phase transfer and N-heterocyclic carbene catalyses (194 references).

Antifouling Systems Based on a Polyhedral Oligomeric Silsesquioxane-Based Hexyl Imidazolium Salt Adsorbed on Copper Nanoparticles Supported on Titania.

The reaction of octakis(3-chloropropyl)octasilsesquioxane with four equivalents of 1-hexylimidazole or 1-decylimidazole gave two products labelled as HQ-POSS (hexyl-imidazolium quaternized POSS) and DQ-POSS (decyl-imidazolium quaternized POSS) as regioisomer mixtures. An investigation of the biological activity of these two compounds revealed the higher antimicrobial performances of HQ-POSS against Gram-positive and Gram-negative microorganisms, proving its broad-spectrum activity. Due to its very viscous nature, HQ-POSS was adsorbed in variable amounts on the surface of biologically active oxides to gain advantages regarding the expendability of such formulations from an applicative perspective. Titania and 5 wt% Cu on titania were used as supports. The materials 10HQ-POSS/Ti and 15HQ-POSS/5CuTi strongly inhibited the ability of Pseudomonas PS27 cells-a bacterial strain described for its ability to handle very toxic organic solvents and perfluorinated compounds-to grow as planktonic cells. Moreover, the best formulations (i.e., 10HQ-POSS/Ti and 15HQ-POSS/5CuTi) could prevent Pseudomonas PS27 biofilm formation at a certain concentration (250 µg mL-1) which greatly impaired bacterial planktonic growth. Specifically, 15HQ-POSS/5CuTi completely impaired cell adhesion, thus successfully prejudicing biofilm formation and proving its suitability as a potential antifouling agent. Considering that most studies deal with quaternary ammonium salts (QASs) with long alkyl chains (>10 carbon atoms), the results reported here on hexylimidazolium-based POSS further deepen the knowledge of QAS formulations which can be used as antifouling compounds.

Site-specific halloysite functionalization by polydopamine: A new synthetic route for potential near infrared-activated delivery system.

Halloysite nanotubes (HNTs) represent a versatile core structure for the design of functional nanosystems of biomedical interest. However, the development of selective methodologies for the site-controlled functionalization of the nanotubes at specific sites is not an easy task. This study aims to accomplish a procedure for the site-selective/specific, "pin-point", functionalization of HNTs with polydopamine (HNTs@PDA). This goal was achieved, at pH 6.5, by exploiting the basicity of ZnO nanoparticles anchored on the HNTs external surface (HNTs@ZnO) to induce a punctual polydopamine polymerization and coating. The morphology and the chemical composition of the nanomaterial was demonstrated by several techniques. Turbidimetric analysis showed that PDA coating affected the aqueous stability of HNTs@PDA compared to both HNTs@ZnO and HNTs. Notably, hyperthermia studies revealed that the nanomaterial induced a local thermic rise, up to 50 °C, under near-infrared (NIR) irradiation. Furthermore, secondary functionalization of HNTs@PDA by selective grafting of biotin onto the PDA coating followed by avidin binding was also accomplished.

A Study on the Stability of Carbon Nanoforms-Polyimidazolium Network Hybrids in the Conversion of CO2 into Cyclic Carbonates: Increase in Catalytic Activity after Reuse.

Three different carbon nanoforms (CNFs), single-walled and multi-walled carbon nanotubes (SWCNTs, MWCNTs) and carbon nanohorns (CNHs), have been used as supports for the direct polymerization of variable amounts of a bis-vinylimidazolium salt. Transmission electron microscopy confirmed that all CNFs act as templates on the growth of the polymeric network, which perfectly covers the nanocarbons forming a cylindrical (SWCNTs, MWCNTs) or spherical (CNHs) coating. The stability of these hybrid materials was investigated in the conversion of CO2 into cyclic carbonate under high temperature and CO2 pressure. Compared with the homopolymerized monomer, nanotube-based materials display an improved catalytic activity. Beside the low catalytic loading (0.05-0.09 mol%) and the absence of Lewis acid co-catalysts, all the materials showed high TON values (up to 1154 for epichlorohydrin with SW-1:2). Interestingly, despite the loss of part of the polymeric coating for crumbling or peeling, the activity increases upon recycling of the materials, and this behaviour was ascribed to their change in morphology, which led to materials with higher surface areas and with more accessible catalytic sites. Transmission electron microscopy analysis, along with different experiments, have been carried out in order to elucidate these findings.

Tuneable Emission of Polyhedral Oligomeric Silsesquioxane Based Nanostructures that Self-Assemble in the Presence of Europium(III) Ions: Reversible trans-to-cis Isomerization.

Hybrid nanostructures with switchable and reversible "blue-red-green" emission were efficiently synthesized. These nanostructures comprise polyhedral oligomeric silsesquioxanes (POSS) that behave as a nanocage that can be functionalized with terpyridine-based organic ligands, which can be easily complexed with europium (III) ions. The complexes were characterized by UV-Vis and fluorescence spectroscopy and their stoichiometry was also confirmed by 1 H NMR spectroscopy. In the presence of the Eu(III) ions, the octafunctionalized nanocages self-assemble to form 3D architectures that display an intense red-emission, especially in the solid state. The presence of an alkenyl group bridging the inorganic core to the organic moiety was employed to tune the emission properties by trans-cis isomerization of the double bond. In the case of the octafunctionalized nanocages (O-POSS), this isomerization was monitored in the presence of Eu(III) cations and was accompanied by an evident colour change from blue (trans-O-POSS) to red (Eu@trans-O-POSS) and finally to green (cis-O-POSS) as consequence of the release of the metal cations. This behaviour, together with the easy dispersion of the dry powder and the possibility of coating as a film in presence of small amounts of solvent, makes the emissive solid promising for applications in materials science.

Paper Functionalized with Nanostructured TiO2/AgBr: Photocatalytic Degradation of 2-Propanol under Solar Light Irradiation and Antibacterial Activity.

A facile method to produce paper-TiO2 decorated with AgBr nanoparticles by a mild hydrothermal process at 140 °C was reported. The synthesis method was based on the immersion of the paper in a ready-made suspension of TiO2/AgBr, comprising TiO2 sol solution prepared in acidic conditions and AgBr solution (10-4 M). A paper-TiO2 sample was prepared and used as reference. The formation of crystalline phases of titanium oxide (TiO2) and silver bromide (AgBr) was demonstrated by XRD, Raman and EDX analyses. The surface morphology of the TiO2-AgBr was investigated by Field Effect Scanning Electronic Microscopy (FE-SEM). The photocatalytic performances of the prepared material were evaluated in the degradation of 2-propanol in the gas phase, under simulated sunlight illumination. Its antibacterial properties against Escherichia coli (E. coli) were also assessed. The efficiency of photodegradation and the anti-bacterial properties of paper-TiO2-AgBr were attributed to an improvement in the absorption of visible light, the increased production of reactive oxygen species (ROS) and the low recombination of photogenerated charge carriers due to the synergistic effect between TiO2 and AgBr/Ag nanoparticles.

Bending Sensors Based on Thin Films of Semitransparent Bithiophene-Fulleropyrrolidine Bisadducts.

A novel bithiophene-fulleropyrrolidine bisadducts system (bis-Th2PC60 ) was synthesized and electropolymerized by chronoamperometry onto flexible ITO/PET substrates. The resulting semitransparent thin film was characterized by XPS, FT-IR, cyclic voltammetry and optical techniques, confirming the good outcome of the electropolymerization process. AFM investigations permitted to highlight an inherent disordered granular morphology, in which the grain-to-grain separation depends upon the application of bending. The electrical resistance of the thin film was characterized as a function of bending (in the range 0°-90°), showing promising responsivity to low bending angles (10°-30°). The ΔR/R0 variations turn out to be 8 %,16 % and 20 % for bending angles equal to 10°, 20° and 30°, respectively. This study represents a first step towards the understanding of piezoresistive properties in electropolymerized fullerenes-based thin films, opening up applications as bending sensor.

New Mussel Inspired Polydopamine-Like Silica-Based Material for Dye Adsorption.

A straightforward and economic procedure has been developed for the synthesis of a new polydopamine-like silica-based material that has been obtained by oxidation of catechol with KIO4 followed by reaction with 3-aminopropyltrimethoxysilane. All techniques adopted for characterization showed that the obtained material is rich in different functional groups and the morphological analyses revealed dimensions in the nanometric range. The hybrid material has been characterized by several techniques showing its polydopamine-like nature, and preliminary observations for dye adsorption have been reported.

Straightforward preparation of highly loaded MWCNT-polyamine hybrids and their application in catalysis.

Multiwalled carbon nanotubes (MWCNTs) were easily and efficiently functionalised with highly cross-linked polyamines. The radical polymerisation of two bis-vinylimidazolium salts in the presence of pristine MWCNTs and azobisisobutyronitrile (AIBN) as a radical initiator led to the formation of materials with a high functionalisation degree. The subsequent treatment with sodium borohydride gave rise to the reduction of imidazolium moieties with the concomitant formation of secondary and tertiary amino groups. The obtained materials were characterised by thermogravimetric analysis (TGA), elemental analysis, solid state 13C-NMR, Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), potentiometric titration, and temperature programmed desorption of carbon dioxide (CO2-TPD). One of the prepared materials was tested as a heterogeneous base catalyst in C-C bond forming reactions such as the Knoevenagel condensation and Henry reaction. Furthermore, two examples concerning a sequential one-pot approach involving two consecutive reactions, namely Knoevenagel and Michael reactions, were reported.

Efficient Conversion of Carbon Dioxide by Imidazolium-Based Cross-Linked Nanostructures Containing Polyhedral Oligomeric Silsesquioxane (POSS) Building Blocks.

Polyhedral oligomeric silsesquioxanes (POSS) have been employed as molecular building blocks for the synthesis of imidazolium cross-linked networks, to be used as heterogeneous catalysts for the conversion of carbon dioxide into cyclic carbonates. Two hybrid materials with different nucleophilic species (bromide and iodide) have been prepared and characterized by means of elemental analysis, 13 C and 29 Si solid-state NMR spectroscopy, thermogravimetric analysis and IR spectroscopy. The solids were tested as the sole catalyst under metal- and solvent-free reaction conditions showing full selectivity toward the formation of cyclic carbonates. High turnover number (TON) and productivity values, up to 5502 and 1081 respectively for glycidol conversion at 100 °C and up to 4942 and 1122 for epichlorohydrin conversion at 150 °C after 3 h, were obtained. Such outstanding productivity values were ascribed to the optimal organic/inorganic (i. e., imidazolium moiety/POSS support) weight ratio. The recyclability of the materials was successfully verified for five consecutive runs allowing their consideration as promising candidates for continuous flow technologies.

Effect of halloysite nanotubes filler on polydopamine properties.

HYPOTHESIS: Polydopamine (PDA) is widely used as hydrophilic coating for several applications. However, most of the methods studied to improve or manipulate PDA properties are multistep and time-consuming, and there is a need for versatile strategies aimed at controlling and modifying the properties of PDA. EXPERIMENTS: PDA-halloysite nanocomposites were produced under different oxidation conditions in alkaline and acidic media and were characterized by UV-visible and attenuated total refraction- Fourier Transform Infrared spectroscopies, thermogravimetric analysis, porosimetry, scanning electron microscopy, X-ray diffraction and contact angle measurements against the reference PDA polymer. FINDINGS: Inclusion of the inorganic halloysite nanofiller in the PDA component was found to affect the thermal properties of the nanocomposite as well as its structure, depending on the experimental conditions. The ability of the nanocomposites to adsorb organic dyes as possible membrane coatings for environmental remediation was also investigated by different models, suggesting promising applications as adsorbents for the treatment of wastewaters.

Imidazolium-Functionalized Carbon Nanohorns for the Conversion of Carbon Dioxide: Unprecedented Increase of Catalytic Activity after Recycling.

Six new hybrid materials composed of carbon nanohorns (CNHs) and highly cross-linked imidazolium salts were easily synthesized using a one-step procedure based on the radical oligomerization of bis-vinylimidazolium salts (bVImiX) in the presence of pristine CNHs. The hybrid materials were characterized and employed as the sole catalysts for the conversion of carbon dioxide into cyclic carbonate by reaction with epoxides. The solids displayed excellent turnover number and productivity. Moreover, four catalysts were investigated in recycling experiments. Two catalysts containing an octyl linker between the imidazolium units and a bromide or an iodide anion showed no loss in activity after three cycles. The other two catalysts containing a p-xylyl linker and a bromide anion and different CNHs/bVImiX ratios showed an unprecedented increase of activity after recycling.

Single-Walled Carbon Nanotube-Polyamidoamine Dendrimer Hybrids for Heterogeneous Catalysis.

We report the synthesis and catalytic properties of single-walled carbon nanotube-polyamidoamine dendrimers hybrids (SWCNT-PAMAM), prepared via a convergent strategy. The direct reaction of cystamine-based PAMAM dendrimers (generations 2.5 and 3.0) with pristine SWCNTs in refluxing toluene, followed by immobilization and reduction of [PdCl4](2-), led to the formation of highly dispersed small palladium nanoparticles homogeneously confined throughout the nanotube length. One of these functional materials proved to be an efficient catalyst in Suzuki and Heck reactions, able to promote the above processes down to 0.002 mol % showing a turnover number (TON) of 48 000 and a turnover frequency (TOF) of 566 000 h(-1). In addition, the hybrid material could be recovered and recycled for up to 6 times. No leaching of the metal has been detected during the Suzuki coupling. Additional experiments carried out on the spent catalyst permitted to suggest that a "release and catch" mechanism is operative in both reactions, although during Heck reaction small catalytically active soluble Pd species are also present.

Highly Loaded Multi-Walled Carbon Nanotubes Non-Covalently Modified with a Bis-Imidazolium Salt and their Use as Catalyst Supports.

The surfaces of multi-walled carbon nanotubes (MWCNTs) were non-covalently modified using two bis-imidazolium dibromide derivatives having phenyl or pyrene groups. Due to the presence of the two pyrene groups the bis(pyren-1-ylmethylimidazolium) dibromide derivative was immobilised at a loading of about 15-16 wt %, whereas only <3 wt % of the phenyl derivative was immobilised. The presence of the two imidazolium cations helped the immobilisation of tetrachloropalladate ions after exchange with bromide ions. Tetrachloropalladate was used as pre-catalyst in several Suzuki-Miyaura carbon-carbon cross-coupling reactions in water or water/ethanol at 50 °C in only 0.1 mol % and compared with the non-supported pre-catalyst. The MWCNT-supported material was used in five consecutive cycles of the Suzuki-Miyaura reaction. Recycling using phenylboronic acid and 4-bromobenzaldehyde in water/ethanol was achieved with only a minor loss in activity. HRTEM images clearly showed the presence of the bis(pyren-1-ylmethylimidazolium) derivative on the sidewalls of MWCNTs.