Heterometallic AuI 6 AgI 6 Macrocyclic Cluster Templated by a Supramolecular Melamine Dimer.

The application of supramolecular templates in aligning atomically precise heterometal arrays is important for pursuing functional materials. Herein, we report that a bilayered supramolecular tri-deprotonated melamine dimer functions as an effective template in the construction of a heterometallic gold(I)-silver(I) macrocyclic cluster [µ6 -(C3 N6 H3 )3- ]2 -AuI 6 AgI 6 . X-ray single crystal structural analysis showed that a crown-like AuI 6 AgI 6 macrocycle is aligned around two parallelly stacked µ6 -(C3 N6 H3 )3- moieties hold together with π-π interactions. Theoretical calculations revealed that the [µ6 -(C3 N6 H3 )3- ]2 motif dominantly contributes to the near-occupied orbitals in the electronic structure, which is closely related to its luminescence properties. This work demonstrates that the supramolecular templates containing multiple symmetric binding sites may present a facile approach in the construction of functional metal clusters.

'Passivated Precursor' Approach to All-Alkynyl-Protected Gold Nanoclusters and Total Structure Determination of Au130.

A 'passivated precursor' approach is developed for the efficient synthesis and isolation of all-alkynyl-protected gold nanoclusters. Direct reduction of dpa-passivated precursor Au-dpa (Hdpa=2,2'-dipyridylamine) in one-pot under ambient conditions gives a series of clusters including Au22(C≡CR)18 (R=-C6H4-2-F), Au36(C≡CR)24, Au44(C≡CR)28, Au130(C≡CR)50, and Au144(C≡CR)60. These clusters can be well separated via column chromatography. The overall isolation yield of this series of clusters is 40 % (based on gold), which is much improved in comparison with previous approaches. It is notable that the molecular structure of the giant cluster Au130(C≡CR)50 is revealed, which presents important information for understanding the structure of the mysterious Au130 nanoclusters. Theoretical calculations indicated Au130(C≡CR)50 has a smaller HOMO-LUMO gap than Au130(S-C6H4-4-CH3)50. This facile and reliable synthetic approach will greatly accelerate further studies on all-alkynyl-protected gold nanoclusters.

Large Scale Synthesis of a Stable Prefunctionalized Silver Nanocluster.

Due to the stability issue, It is difficult to prepare a silver nanocluster bearing functional sites, especially at a large scale. We report the synthesis and structure of a stable silver nanocluster bearing multiple surface aldehyde groups [Ag21(Ph2PO2)10(p-CHOPhC≡C)6]SbF6, which allows for postsynthesis modification such as surface functionalization through aldimine condensation to give homochiral clusters. Remarkably, the preparation of this cluster can be done in ~90% high yield at gram scale, which facilitates further studies and potential applications. Through DFT calculations and geometric structure analysis, the high stability of this cluster is attributed to the geometric closure and electronic structure. This is the first time that an effective one-pot method has been developed to synthesize functional silver nanoclusters in high yield. The title cluster will be useful in the development of a variety of cluster-based materials.

A Cages-on-Cluster Structure Constructed by Post-Clustering Covalent Modifications and Guest-Enabled Stimuli-Responsive Luminescence.

A gold(I)-cluster-based twin-cage has been constructed by post-clustering covalent modification of a hexa-aldehyde cluster precursor with triaminotriethylamines. The cages-on-cluster structure has double cavities and four binding sites, which show site-discriminative binding for silver(I) and copper(I) guests. The guests in the tripodal hats affect the luminescence of the cluster: the tetra-silver(I) host-guest complex is weakly red-emissive, while the bis-copper(I)-bis-silver(I) one is non-emissive but is a stimuli-responsive supramolecule. The copper(I) ion inside the tri-imine cavity is oxidation sensitive, which enables the release of the bright emissive precursor cluster triggered by H2O2 solution. The hybridization of a cluster with cavities to construct a cluster-based cage presents an innovative concept for functional cluster design, and the post-clustering covalent modification opens up new avenues for finely tuning the properties of clusters.

Eight-Electron Superatomic Cu31 Nanocluster with Chiral Kernel and NIR-II Emission.

Owing to the inherent instability caused by the low Cu(I)/Cu(0) half-cell reduction potential, Cu(0)-containing copper nanoclusters are quite uncommon in comparison to their Ag and Au congeners. Here, a novel eight-electron superatomic copper nanocluster [Cu31(4-MeO-PhC≡C)21(dppe)3](ClO4)2 (Cu31, dppe = 1,2-bis(diphenylphosphino)ethane) is presented with total structural characterization. The structural determination reveals that Cu31 features an inherent chiral metal core arising from the helical arrangement of two sets of three Cu2 units encircling the icosahedral Cu13 core, which is further shielded by 4-MeO-PhC≡C- and dppe ligands. Cu31 is the first copper nanocluster carrying eight free electrons, which is further corroborated by electrospray ionization mass spectrometry, X-ray photoelectron spectroscopy and density functional theory calculations. Interestingly, Cu31 demonstrates the first near-infrared (750-950 nm, NIR-I) window absorption and the second near-infrared (1000-1700 nm, NIR-II) window emission, which is exceptional in the copper nanocluster family and endows it with great potential in biological applications. Of note, the 4-methoxy groups providing close contacts with neighboring clusters are crucial for the cluster formation and crystallization, while 2-methoxyphenylacetylene leads only to copper hydride clusters, Cu6H or Cu32H14. This research not only showcases a new member of copper superatoms but also exemplifies that copper nanoclusters, which are nonluminous in the visible range may emit luminescence in the deep NIR region.

Synthesis and Study of Photothermal Properties of a Mixed-Valence Nanocluster CuI/CuII with Strong near-Infrared Optical Absorption Supported by 4-tert-Butylcalix[4]arene Ligand.

The first mixed-valence nanocluster CuI/CuII with the highest percentage of CuII ions was synthesized by using 4-tert-butylcalix[4]arene (Calix4), with the formula DMF2⊂[(CO3)2-@CuII6CuI3(Calix4)3Cl2(DMF)5(H3O)]•DMF (1), as a photothermal nanocluster. Its structure was characterized using single-crystal X-ray diffraction, Fourier-transform infrared spectroscopy, and powder X-ray diffraction. In addition, the charge state and chemical composition of the nanocluster were determined using electrospray ionization spectrometry and X-ray photoelectron spectroscopy (XPS) spectrum. The results of the XPS and X-ray crystallography revealed that there are two independent CuII and CuI centers in nanocluster 1 with the relative abundances of 66.6 and 33.3% for CuII and CuI, respectively. The nanocluster contains three four-coordinated CuI ions with a square-planar geometry and six five-coordinated CuII ions with a square pyramid geometry. The nanocluster shows strong near-infrared optical absorption in the solid state and excellent photothermal conversion ability (the equilibrium temperature ∼78.2 °C) with the light absorption centers in 286-917 nm over previous reported pentanucleus CuI4CuII clusters and CuII compounds.

One-step preparation of Pt/Ag nanoclusters for CO2 transformation.

Structurally precise metal nanoclusters with a facile synthetic process and high catalytic performance have been long pursued. These atomically precise nanocatalysts are regarded as model systems to study structure-performance relationships, surface coordination chemistry, and the reaction mechanism of heterogeneous metal catalysts. Nevertheless, the research on silver-based nanoclusters for driving chemical transformations is sluggish in comparison to gold counterparts. Herein, we report the one-step synthesis of Pt/Ag alloy nanoclusters of [PtAg9(C18H12Br3P)7Cl3](C18H12Br3P), which are highly active in catalysing cycloaddition reactions of CO2 and epoxides. The cluster was obtained in a rather simple way with the reduction of silver and platinum salts in the presence of ligands in one pot. The molecular structure of the titled cluster describes the protection of the Pt-centred Ag9 crown by the shell of phosphine ligands and halides. Its electronic structure, as revealed by density function theoretical calculations, adopts a superatomic geometry with 1S21P6 configuration. Interestingly, the cluster displays high activity in the formation of cyclic carbonates from CO2 under mind conditions.

Organo-macrocycle-containing hierarchical metal-organic frameworks and cages: design, structures, and applications.

Developing hierarchical ordered systems is challenging. Using organo-macrocycles to construct metal-organic frameworks (MOFs) and porous coordination cages (PCCs) provides an efficient way to obtain hierarchical assemblies. Macrocycles, such as crown ethers, cyclodextrins, calixarenes, cucurbiturils, and pillararenes, can be incorporated within MOFs/PCCs and they also endow the resultant composites with enhanced properties and functionalities. This review summarizes recent developments of organo-macrocycle-containing hierarchical MOFs/PCCs, emphasizing applications and structure-property relationships of these hierarchically porous materials. This review provides insights for future research on hierarchical self-assembly using macrocycles as building blocks and functional ligands to extend the applications of the composites.

Porous Framework Materials for Bioimaging and Cancer Therapy.

Cancer remains one of the most pressing diseases in the world. Traditional treatments, including surgery, chemotherapy, and radiotherapy still show certain limitations. Recently, numerous cancer treatments have been proposed in combination with novel materials, such as photothermal therapy, chemodynamic therapy, immunotherapy, and a combination of therapeutic approaches. These new methods have shown significant advantages in reducing side effects and synergistically enhancing anti-cancer efficacy. In addition to the above approaches, early diagnosis and in situ monitoring of lesion areas are also important for reducing side effects and improving the success rate of cancer therapy. This depends on the decent use of bioimaging technology. In this review, we mainly summarize the recent advances in porous framework materials for bioimaging and cancer therapy. In addition, we present future challenges relating to bioimaging and cancer therapy based on porous framework materials.

Disc-Like Silver Nanocluster Ag93 Built with Bicapped Hexagonal Prismatic Ag15 and Ino Decahedral Ag13 Units.

The reduction of alkynyl-silver and phosphine-silver precursors with a weak reducing reagent Ph2 SiH2 led to the formation of a novel silver nanocluster [Ag93 (PPh3 )6 (C≡CR)50 ]3+ (R=4-CH3 OC6 H4 ), which is the largest structurally characterized cluster of clusters. This disc-shaped cluster has a Ag69 kernel consisting of a bicapped hexagonal prismatic Ag15 unit wrapped by six Ino decahedra through edge-sharing. This is the first time that Ino decahedra are used as a building block to assemble a cluster of clusters. Moreover, the central silver atom has a coordination number of 14, which is the highest in metal nanoclusters. This work provides a diverse metal packing pattern in metal nanoclusters, which is helpful for understanding metal cluster assembling mechanisms.

Modeling the Enzyme Specificity by Molecular Cages through Regulating Reactive Oxygen Species Evolution.

Mimicking the active site and the substrate binding cavity of the enzyme to achieve specificity in catalytic reactions is an essential challenge. Herein, porous coordination cages (PCCs) with intrinsic cavities and tunable metal centers have proved the regulation of reactive oxygen species (ROS) generating pathways as evidenced by multiple photo-induced oxidations. Remarkably, in the presence of the Zn4 -µ4 -O center, PCC converted dioxygen molecules from triplet to singlet excitons, whereas the Ni4 -µ4 -O center promoted the efficient dissociation of electrons and holes to conduct electron transfer towards substrates. Accordingly, the distinct ROS generation behavior of PCC-6-Zn and PCC-6-Ni enables the conversion of O2 to 1 O2 and O2 ⋅- , respectively. In contrast, the Co4 -µ4 -O center combined the 1 O2 and O2 ⋅- together to generate carbonyl radicals, which in turn reacted with the oxygen molecules. Harnessing the three oxygen activation pathways, PCC-6-M (M=Zn/Ni/Co) display specific catalytic activities in thioanisole oxidation (PCC-6-Zn), benzylamine coupling (PCC-6-Ni), and aldehyde autoxidation (PCC-6-Co). This work not only provides fundamental insights into the regulation of ROS generation by a supramolecular catalyst but also demonstrates a rare example of achieving reaction specificity through mimicking natural enzymes by PCCs.

Identification of the Active Species in Bimetallic Cluster Catalyzed Hydrogenation.

Identification of the authentic active species of cluster catalysis is rather challenging, and direct structural evidence is quite valuable and difficult to obtain. Two "isostructural" clusters, Ag25Cu4Cl6(dppb)6(PhC≡C)12(SO3CF3)3 (1) and Ag25Cu4Cl6H8(dppb)6(PhC≡C)12(SO3CF3)3 (2H) (dppb is 1,4-bis(diphenylphosphine)butane), have been successfully isolated and structurally characterized. Both these clusters have a centered icosahedron Ag13 core with the same peripheral composition and structure. The only difference is that 2H has eight hydrides but 1 has none, that is, the kernels are Ag135+ and Ag13H85+ in 1 and 2H, respectively. The catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) as a model reaction is assessed with the two clusters. Cluster 2H is very active with 100% yield within 2 h, whereas 1 shows a very low conversion (∼8%) under the same conditions. Interestingly, high catalytic activity was observed when 1 was converted to 2H with the oxidation of H2O2 under catalytic conditions. The unprecedented transformation of a reduced nanocluster to an Ag(I)Cu(I) bimetallic cluster compound provides an excellent platform to determine the real active cluster in terms of metal cluster catalysis. The present work presents clear structural evidence that the catalytic performance of metal nanoclusters can be modulated by properly regulating the oxidation state of their constituted metal atoms.

A 59-Electron Non-Magic-Number Gold Nanocluster Au99(C≡CR)40 Showing Unexpectedly High Stability.

An atomically resolved gold nanocluster Au99(C≡CC6H3-2,4-F2)40 (Au99) with an unusual 59 valence electrons has been synthesized. Single-crystal X-ray diffraction reveals that its Au79 kernel is a Au49 Marks decahedron capped by two Au15 units. The surface structure of Au99 consists of 20 linear Au(C≡CR)2 staples. Intercluster interactions are observed between these D5 symmetric clusters. The existence of an unpaired electron is verified by magnetic measurement. Interestingly, this open-shell gold cluster Au99 stays intact in toluene solution at 80 °C for more than a week, and it has good charging-discharging capability under electrochemical conditions. The compact ligand shell protection around the symmetric core accounts for the high stability. This work suggests that geometric factors may play a crucial role in determining the stability of a metal nanocluster, even though the cluster has an open-shell electronic structure.

Face-Centered Cubic Silver Nanoclusters Consolidated with Tetradentate Formamidinate Ligands.

Growing attention has been paid to nanoclusters with face-centered cubic (fcc) metal kernels, due to its structural similarity to bulk metals. We demonstrate that the use of tetradentate formamidinate ligands facilitate the construction of two fcc silver nanoclusters: [Ag52(5-F-dpf)16Cl4](SbF6)2 (Ag52, 5-F-Hdpf = N,N'-di(5-fluoro-2-pyridinyl)formamidine) and [Ag53(5-Me-dpf)18](NO3)5 (Ag53, 5-Me-Hdpf = N,N'-di(5-methyl-2-pyridinyl)formamidine). Single-crystal X-ray structural analysis revealed that the silver atoms in both clusters are in a layer-by-layer arrangement, which can be viewed as a portion of the fcc packing of silver. The nitrogen donors of amidinate ligands selectively passivate the {111} facets. All silver atoms are involved in the fcc packing, that is, no staple motifs are observed due to the linear arrangement of the four N donors of the dpf ligands. The characteristic optical absorption bands of Ag52 and Ag53 have been studied with a time-dependent density functional theory. This work provides a facile access to assembling atomically precise fcc-type nanoclusters and shows the prospect of amidinates as protecting ligands in synthesizing metal nanoclusters.

Nitrogen Donor Protection for Atomically Precise Metal Nanoclusters.

Surface organic ligands are critical in dictating the structures and properties of atomically precise metal nanoclusters. In contrast to the conventionally used thiolate, phosphine and alkynyl ligands, nitrogen donor ligands have not been used in the protection for well-defined metal nanoclusters until recently. This review focuses on recent developments in atomically precise metal nanoclusters stabilized by different types of nitrogen donor ligands, in which the synthesis, total structure determination and various properties are covered. We hope that this review will provide insights into the rational design of N donor-protected metal nanoclusters in terms of structural and functional modulation.

Elongation of a Trigonal-Prismatic Copper Cluster by Diphosphine Ligands with Longer Spacers.

A pair of alkynyl-diphosphine-coprotected copper(I) clusters, namely, [Cu6(4-MeO-PhC≡C)5(dppe)3](ClO4) [Cu6; dppe = 1,2-bis(diphenylphosphino)ethane] and [Cu11(H)(4-MeO-PhC≡C)8(dpppe)3](ClO4)2 [Cu11; dpppe = 1,5-bis(diphenylphosphino)pentane], featuring trigonal-prismatic frameworks have been synthesized by a reduction method. Their molecular structures are determined by X-ray crystallography and characterized by multiple techniques. The length of the spacer of the diphosphine ligand can directly affect the aspect ratio of the clusters. Cu6 with dppe as ligands has a trigonal-prismatic core. The longer alkyl spacer of dpppe helps to elongate the trigonal-prismatic framework to form Cu11, with its trigonal-prismatic framework encapsulating a Cu5H unit. Electrospray ionization mass spectrometry, 2H NMR, and liberations of hydrogen further verify the presence of a hydride in the cluster. Density functional theory calculations help to locate the position of the hydride and understand the electronic structures of the clusters. Cu11 is the first alkynyl-phosphine-coprotected copper hydride cluster. These two clusters show distinct luminescence properties. The compact Cu6 is phosphorescent upon radiation, while the longer Cu11 with more flexibility is nonluminous. This work enriches the family of copper hydrides and demonstrates the ligand effects in the extension of the length and structural complexity of clusters.

Structural Engineering toward Gold Nanocluster Catalysis.

Atomically precise gold nanoclusters provide great opportunities to explore the relationship between the structure and properties of nanogold catalysts. A nanocluster consists of a metal core and a surface ligand shell, and both the core and shell have significant effects on the catalytic properties. Thanks to their precise structures, the active metal site of the clusters can be readily identified and the effects of ligands on catalysis can be disclosed. In this Minireview, we summarize recent advances in catalytic research of gold nanoclusters, emphasizing four strategies for constructing open metal sites, including by post-treatment, the bulky ligands strategy, the surface geometric mismatch method, and heteroatom doping procedures. We also discuss the effects of ligands on the catalytic activity, selectivity, and stability of gold cluster catalysts. Finally, we present future challenges relating to gold cluster catalysis.

Anion-Directed Regulation of Structures and Luminescence of Heterometallic Clusters.

Anions have been used to regulate the structures and luminescence of heterometallic clusters. Introducing ClO4 - into orange-emissive, butterfly-like [(C)(Au-PPhpy2 )6 Ag4 ](BF4 )6 (1, PPhpy2 =bis(2-pyridyl)phenylphosphine) leads to the formation of red-emissive [(C)(Au-PPhpy2 )6 Ag5 (ClO4 )3 ](ClO4 )4 (2) with a novel trigonal bipyramidal structure; employing PhCO2 - gives yellow-emissive, hexagram-like [(C)(Au-PPhpy2 )6 Ag6 (PhCO2 )3 ](BF4 )5 (3). Notably, 1 exhibits weak luminescence in CH2 Cl2 /CH3 OH=1 : 1 (v : v) with a quantum yield (QY) of 0.05, whereas it was dramatically increased to 0.49 and 0.83 for 2 and 3, respectively. Theoretical calculation confirms that the involvement of anions in the electronic structures is responsible for the shifts of emission. The high QYs of 2 and 3 are attributed to the protection provided by ligands and anions. This work demonstrates that anions may serve as an extra designable factor beyond just counterions for functional metal clusters.

Ligand Engineering toward the Trade-Off between Stability and Activity in Cluster Catalysis.

We report the structures, stability and catalysis properties of two Ag21 nanoclusters, namely [Ag21 (H2 BTCA)3 (O2 PPh2 )6 ]SbF6 (1) and [Ag21 (C≡CC6 H3 -3,5-R2 )6 (O2 PPh2 )10 ]SbF6 (2) (H4 BTCA=p-tert-butylthiacalix[4]arene, R=OMe). Both Ag21 structures possess an identical icosahedral kernel that is surrounded by eight peripheral Ag atoms. Single-crystal structural analysis and ESI-MS revealed that 1 is an 8-electron cluster and 2 has four free electrons. Theoretical results show that the P-symmetry orbitals are found as HOMO-1 and HOMO states in 1, and the frontier unoccupied molecular orbitals (LUMO, LUMO+1 and LUMO+2) show D-character, indicating 1 is a superatomic cluster with an electronically closed shell 1S2 1P6 , while 2 has an incomplete shell configuration 1S2 1P2 . These two Ag21 clusters show superior stability under ambient conditions, and 1 is robust even at 90 °C in toluene and under oxidative conditions (30 % H2 O2 ). Significantly, 2 exhibits much higher activity than 1 as catalyst in the reduction of 4-nitrophenol. This work demonstrates that ligands can influence the electronic structures of silver clusters, and further affect their stability and catalytic performance.

Molecular Gold Nanocluster Au156 Showing Metallic Electron Dynamics.

The boundary between molecular and metallic gold nanoclusters is of special interest. The difficulty in obtaining atomically precise nanoclusters larger than 2 nm limits the determination of such a boundary. The synthesis and total structural determination of the largest all-alkynyl-protected gold nanocluster (Ph4P)6[Au156(C≡CR)60] (R = 4-CF3C6H4-) (Au156) are reported. It presents an ideal platform for studying the relationship between the structure and the metallic nature. Au156 has a rod shape with the length and width of the kernel being 2.38 and 2.04 nm, respectively. The cluster contains a concentric Au126 core structure (Au46@Au50@Au30) protected by 30 linear RC≡C-Au-C≡CR staple motifs. It is interesting that Au156 displays multiple excitonic peaks in the steady-state absorption spectrum (molecular) and pump-power-dependent excited-state dynamics as revealed in the transient absorption spectrum (metallic), which indicates that Au156 is a critical crossover cluster for the transition from molecular to metallic state. Au156 is the smallest-sized gold nanocluster showing metal-like electron dynamics, and it is recognized that the cluster shape is one of the important factors determining the molecular or metallic nature of a gold nanocluster.