Optical force decoration of 3D microstructures with plasmonic particles.

Optical forces are used to push and aggregate gold nanorods onto several substrates creating surface-enhanced Raman scattering (SERS) active hot spots for Raman-based identification of proteins. By monitoring the increase of the protein SERS signal, we observe different aggregation times for different curvatures of the substrates. The slower aggregation dynamics on curved surfaces is justified by a simple geometrical model. In particular, this technique is used to decorate three-dimensional microstructures and to quickly realize hybrid micro/nanosensors for highly sensitive detection of biological material directly in a liquid environment.

Optical trapping of silver nanoplatelets.

Optical trapping of silver nanoplatelets obtained with a simple room temperature chemical synthesis technique is reported. Trap spring constants are measured for platelets with different diameters to investigate the size-scaling behaviour. Experimental data are compared with models of optical forces based on the dipole approximation and on electromagnetic scattering within a T-matrix framework. Finally, we discuss applications of these nanoplatelets for surface-enhanced Raman spectroscopy.

Optical trapping of nanotubes with cylindrical vector beams.

We use laser beams with radial and azimuthal polarization to optically trap carbon nanotubes. We measure force constants and trap parameters as a function of power showing improved axial trapping efficiency with respect to linearly polarized beams. The analysis of the thermal fluctuations highlights a significant change in the optical trapping potential when using cylindrical vector beams. This enables the use of polarization states to shape optical traps according to the particle geometry, as well as paving the way to nanoprobe-based photonic force microscopy with increased performance compared to a standard linearly polarized configuration.

Optical trapping and optical force positioning of two-dimensional materials.

In recent years, considerable effort has been devoted to the synthesis and characterization of two-dimensional materials. Liquid phase exfoliation (LPE) represents a simple, large-scale method to exfoliate layered materials down to mono- and few-layer flakes. In this context, the contactless trapping, characterization, and manipulation of individual nanosheets hold perspectives for increased accuracy in flake metrology and the assembly of novel functional materials. Here, we use optical forces for high-resolution structural characterization and precise mechanical positioning of nanosheets of hexagonal boron nitride, molybdenum disulfide, and tungsten disulfide obtained by LPE. Weakly optically absorbing nanosheets of boron nitride are trapped in optical tweezers. The analysis of the thermal fluctuations allows a direct measurement of optical forces and the mean flake size in a liquid environment. Measured optical trapping constants are compared with T-matrix light scattering calculations to show a quadratic size scaling for small size, as expected for a bidimensional system. In contrast, strongly absorbing nanosheets of molybdenum disulfide and tungsten disulfide are not stably trapped due to the dominance of radiation pressure over the optical trapping force. Thus, optical forces are used to pattern a substrate by selectively depositing nanosheets in short times (minutes) and without any preparation of the surface. This study will be useful for improving ink-jet printing and for a better engineering of optoelectronic devices based on two-dimensional materials.

Fabrication of gold tips by chemical etching in aqua regia.

We present a method to produce sharp gold tips for applications in apertureless near-field optical microscopy and spectroscopy. Thin gold wires are tapered by chemical etching in aqua regia, covered by an isooctane protective layer. Tips with apical radii of curvature of <50 nm are obtained with a 40% yield. The tip performances have been checked by shear-force imaging of amyloid fibrils samples and compared to optical fiber probes. The analysis of the tip morphology, carried out by scanning electron microscopy, shows the existence of two different etching processes occurring in bulk and at the liquid-liquid interface. A simple analytical model is presented to describe the dynamics of the tip formation at the liquid-liquid meniscus interface that fits remarkably well the experimental results in terms of tip shape and length.

Wide angle near-field optical probes by reverse tube etching.

We present a simple modification of the tube etching process for the fabrication of fiber probes for near-field optical microscopy. It increases the taper angle of the probe by a factor of two. The novelty is that the fiber is immersed in hydrofluoric acid and chemically etched in an upside-down geometry. The tip formation occurs inside the micrometer tube cavity formed by the polymeric jacket. By applying this approach, called reverse tube etching, to multimode fibers with 200/250 microm core/cladding diameter, we have fabricated tapered regions featuring high surface smoothness and average cone angles of approximately 30 degrees . A simple model based on the crucial role of the gravity in removing the etching products, explains the tip formation process.

Light-induced rotations of chiral birefringent microparticles in optical tweezers.

We study the rotational dynamics of solid chiral and birefringent microparticles induced by elliptically polarized laser light in optical tweezers. We find that both reflection of left circularly polarized light and residual linear retardance affect the particle dynamics. The degree of ellipticity of laser light needed to induce rotations is found. The experimental results are compared with analytical calculations of the transfer of angular moment from elliptically polarized light to chiral birefringent particles.

Polarization-dependent optomechanics mediated by chiral microresonators.

Chirality is one of the most prominent and intriguing aspects of nature, from spiral galaxies down to aminoacids. Despite the wide range of living and non-living, natural and artificial chiral systems at different scales, the origin of chirality-induced phenomena is often puzzling. Here we assess the onset of chiral optomechanics, exploiting the control of the interaction between chiral entities. We perform an experimental and theoretical investigation of the simultaneous optical trapping and rotation of spherulite-like chiral microparticles. Due to their shell structure (Bragg dielectric resonator), the microparticles function as omnidirectional chiral mirrors yielding highly polarization-dependent optomechanical effects. The coupling of linear and angular momentum, mediated by the optical polarization and the microparticles chiral reflectance, allows for fine tuning of chirality-induced optical forces and torques. This offers tools for optomechanics, optical sorting and sensing and optofluidics.

Rotation detection in light-driven nanorotors.

We analyze the rotational dynamics of light driven nanorotors, made of nanotube bundles and gold nanorods aggregates, with nonsymmetric shapes, trapped in optical tweezers. We identify two different regimes depending on dimensions and optical properties of the nanostructures. These correspond to alignment with either the laser propagation axis or the dominant polarization direction, or rotational motions caused by either unbalanced radiation pressure or polarization torque. By analyzing the motion correlations of the trapped nanostructures, we measure with high accuracy both the optical trapping parameters and the rotation frequency induced by the radiation pressure. Our results pave the way to improved all-optical detection, control over rotating nanomachines, and rotation detection in nano-optomechanics.

Light depolarization induced by metallic tips in apertureless near-field optical microscopy and tip-enhanced Raman spectroscopy.

We have investigated the depolarization effects of light scattered by sharp tips used for apertureless near-field optical microscopy. Dielectric and metal coated tips have been investigated and depolarization factors between 5 and 30% have been measured, changing as a function of the incident light polarization and of the tip shape. The experimental results are in good agreement with theoretical calculations performed by the finite element method, giving a near-field depolarization factor close to 10%. The effect of depolarization has been investigated in polarized tip-enhanced Raman spectroscopy (TERS) experiments; the depolarization gives rise to forbidden Raman modes in Si crystals.

Femtonewton force sensing with optically trapped nanotubes.

We extract the distribution of both center-of-mass and angular fluctuations from three-dimensional tracking of optically trapped nanotubes. We measure the optical force and torque constants from autocorrelation and cross-correlation of the tracking signals. This allows us to isolate the angular Brownian motion. We demonstrate that nanotubes enable nanometer spatial and femtonewton force resolution in photonic force microscopy, the smallest to date. This has wide implications in nanotechnology, biotechnology, nanofluidics, and material science.

Can scanning near-field optical microscopy be compared with confocal laser scanning microscopy? A preliminary study on alpha-sarcoglycan and beta1D-integrin in human skeletal muscle.

The dystrophin-glycoprotein complex and the vinculin-talin-integrin system constitute, together a protein machinery, called costameres. The dystrophin-glycoprotein complex contains, among other proteins, also dystrophin and the sarcoglycans subcomplex, proteins playing a key role in the pathogenesis of many muscular dystrophies and linking the cytoplasmic myofibrillar contractile elements to the signal transducing molecules of the extracellular matrix, also providing structural support to the sarcolemma. The vinculin-talin-integrin system connects some components of the extracellular matrix with intermediate filaments of desmin, forming transverse bridges between Z and M lines. In our previous reports we always studied these systems by confocal laser scanning microscopy (CLSM). In this paper we report on the first applications of optical near-field fluorescence microscopy to the spatial localization of alpha-sarcoglycan and beta1D-integrin in human skeletal muscle fibres in order to better compare and test the images obtained with conventional CLSM and with scanning near-field optical microscopy (SNOM). In addition, the analysis of the surface morphology, and the comparison with the fluorescence map is put forward and analyzed for the first time on human muscle fibres. In aperture-SNOM the sample is excited through the nanometre-scale aperture produced at the apex of an optical fibre after tapering and subsequent metal coating. The acquisition of the topography map, simultaneously to the optical signal, by SNOM, permits to exactly overlap the fluorescence images obtained from the two consecutive scans needed for the double localization. Besides, the differences between the topography and the optical spatial patterns permit to assess the absence of artefacts in the fluorescence maps. Although the SNOM represented a good method of analysis, this technique remains a complementary method to the CLSM and it can be accepted in order to confirm the hypothesis advanced by CLSM.

Near-field Raman imaging of morphological and chemical defects in organic crystals with subdiffraction resolution.

In this study we report on the application of an aperture near-field optical microscope for Raman imaging of organic materials. Spectral analysis and detailed Raman imaging are performed with integration times of 100 ms per point, without the aid of field enhancement effects. The studied samples consist of two high Raman-efficiency molecular samples: a 7,7',8,8'-tetracyanoquinodimethane crystal showing surface defects and a 7,7',8,8'-tetracyanoquinodimethane thin film characterized by the presence of submicrometre-sized organometallic copper-salt complexes. In the first case, the effect of the surface deformation was studied, whereas in the second sample we were able to chemically image the formation of salt complexes. Subdiffraction resolution was achieved in both studies.

A versatile multipurpose scanning probe microscope.

A combined scanning probe microscope has been developed that allows simultaneous operation as a non-contact/tapping mode atomic force microscope, a scattering near-field optical microscope, and a scanning tunnelling microscope on conductive samples. The instrument is based on a commercial optical microscope. It operates with etched tungsten tips and exploits a tuning fork detection system for tip/sample distance control. The system has been tested on a p-doped silicon substrate with aluminium depositions, being able to discriminate the two materials by the electrical and optical images with a lateral resolution of 130 nm.

Photoluminescence properties of multiple stacked planes of GaN/AlN quantum dots studied by near-field optical microscopy.

We have studied the photoluminescence properties of GaN quantum dots with submicrometre lateral resolution by means of near-field scanning optical microscopy. The instrument operated at room temperature and was implemented for near-ultra-violet spectroscopy in the illumination-mode configuration. The analysed sample consisted of several stacked planes of GaN/AlN quantum dots grown by molecular beam epitaxy on Si(111) substrate. The photoluminescence maps showed islands in the micrometre range emitting at different wavelengths, confirming the atomic force microscopy studies on the morphology of similar uncapped samples.