Decomposition iteration strategy for low-dose CT denoising.

In the medical field, computed tomography (CT) is a commonly used examination method, but the radiation generated increases the risk of illness in patients. Therefore, low-dose scanning schemes have attracted attention, in which noise reduction is essential. We propose a purposeful and interpretable decomposition iterative network (DISN) for low-dose CT denoising. This method aims to make the network design interpretable and improve the fidelity of details, rather than blindly designing or using deep CNN architecture. The experiment is trained and tested on multiple data sets. The results show that the DISN method can restore the low-dose CT image structure and improve the diagnostic performance when the image details are limited. Compared with other algorithms, DISN has better quantitative and visual performance, and has potential clinical application prospects.

X-ray image enhancement with multi-scale local edge preserving filter based on fuzzy entropy.

BACKGROUND: Recently, X-rays have been widely used to detect complex structural workpieces. Due to the uneven thickness of the workpiece and the high dynamic range of the X-ray image itself, the detailed internal structure of the workpiece cannot be clearly displayed. OBJECTIVE: To solve this problem, we propose an image enhancement algorithm based on a multi-scale local edge-preserving filter. METHODS: Firstly, the global brightness of the image is enhanced through logarithmic transformation. Then, to enhance the local contrast, we propose utilizing the gradient decay function based on fuzzy entropy to process the gradient and then incorporate the gradient into the energy function of the local edge-preserving filter (LEP) as a constraint term. Finally, multiple base layers and detail layers are obtained through filtering multi-scale decomposition. All detail layers are enhanced and fused using S-curve mapping to improve contrast further. RESULTS: This method is competitive in both quantitative indices and visual perception quality. CONCLUSIONS: The experimental results demonstrate that the proposed method significantly enhances various complex workpieces and is highly efficient.

Industrial x-ray image enhancement network based on a ray scattering model.

X-ray images frequently have low contrast and lost edge features because of the complexity of objects, attenuation of reflected light, and scattering superposition of rays. Image features are frequently lost in traditional enhancement methods. In this paper, we use a ray scattering model to estimate coarsely clear images and an encoder-decoder network and multi-scale feature extraction module to add multi-scale and detail information to the images. To selectively emphasize useful features, a dual attention module and UnsharpMasking with learnable correction factors are used. The results of the experiments demonstrate that the method may significantly enhance the quality of x-ray images.

A novel bidirectional perfusion-like administered system for NIR-II fluorescence imaging precision diagnosis of bladder cancer.

Intravesical instillation has been considered an efficient route for detecting bladder cancer. However, only a small fraction of administered dose permeates into tumor tissues, and insufficient retention time limits their application. In this work, a novel intravesical bidirectional perfusion-like administered mode was developed to improve diagnostic accuracy of bladder tumor imaging. Specifically, the ultrasmall AuPd-P-FA Nanoprobe exhibit excellent NIR-II FL imaging performance due to electronic structure perturbation. Benefiting from the size advantage for kidney metabolism and FA targeting specificity, AuPd-P-FA could effectively administration to bladder tumor. When AuPd-P-FA reached maximum enrichment at 1 h post-injection, the localized and mild thermal energy produced upon laser irradiation activated a phase transition. This thermo-sensitive characteristic could prolong the retention time in bladder and the fluorescence signal could be clearly observed at 6 h post-injection with high accuracy. This novel intravesical bidirectional perfusion-like administered mode is expected to achieve a non-invasive diagnosis of early bladder cancer.

Multi-Scale Feature Fusion Network for Low-Dose CT Denoising.

Computed tomography (CT) is an imaging technique extensively used in medical treatment, but too much radiation dose in a CT scan will cause harm to the human body. Decreasing the dose of radiation will result in increased noise and artifacts in the reconstructed image, blurring the internal tissue and edge details. To get high-quality CT images, we present a multi-scale feature fusion network (MSFLNet) for low-dose CT (LDCT) denoising. In our MSFLNet, we combined multiple feature extraction modules, effective noise reduction modules, and fusion modules constructed using the attention mechanism to construct a horizontally connected multi-scale structure as the overall architecture of the network, which is used to construct different levels of feature maps at all scales. We innovatively define a composite loss function composed of pixel-level loss based on MS-SSIM-L1 and edge-based edge loss for LDCT denoising. In short, our approach learns a rich set of features that combine contextual information from multiple scales while maintaining the spatial details of denoised CT images. Our laboratory results indicate that compared with the existing methods, the peak signal-to-noise ratio (PSNR) value of CT images of the AAPM dataset processed by the new model is 33.6490, and the structural similarity (SSIM) value is 0.9174, which also achieves good results on the Piglet dataset with different doses. The results also show that the method removes noise and artifacts while effectively preserving CT images' architecture and grain information.

Dual-domain fusion deep convolutional neural network for low-dose CT denoising.

BACKGROUND: In view of the underlying health risks posed by X-ray radiation, the main goal of the present research is to achieve high-quality CT images at the same time as reducing x-ray radiation. In recent years, convolutional neural network (CNN) has shown excellent performance in removing low-dose CT noise. However, previous work mainly focused on deepening and feature extraction work on CNN without considering fusion of features from frequency domain and image domain. OBJECTIVE: To address this issue, we propose to develop and test a new LDCT image denoising method based on a dual-domain fusion deep convolutional neural network (DFCNN). METHODS: This method deals with two domains, namely, the DCT domain and the image domain. In the DCT domain, we design a new residual CBAM network to enhance the internal and external relations of different channels while reducing noise to promote richer image structure information. For the image domain, we propose a top-down multi-scale codec network as a denoising network to obtain more acceptable edges and textures while obtaining multi-scale information. Then, the feature images of the two domains are fused by a combination network. RESULTS: The proposed method was validated on the Mayo dataset and the Piglet dataset. The denoising algorithm is optimal in both subjective and objective evaluation indexes as compared to other state-of-the-art methods reported in previous studies. CONCLUSIONS: The study results demonstrate that by applying the new fusion model denoising, denoising results in both image domain and DCT domain are better than other models developed using features extracted in the single image domain.

Enhancement based convolutional dictionary network with adaptive window for low-dose CT denoising.

BACKGROUND: Recently, one promising approach to suppress noise/artifacts in low-dose CT (LDCT) images is the CNN-based approach, which learns the mapping function from LDCT to normal-dose CT (NDCT). However, most CNN-based methods are purely data-driven, thus lacking sufficient interpretability and often losing details. OBJECTIVE: To solve this problem, we propose a deep convolutional dictionary learning method for LDCT denoising, in which a novel convolutional dictionary learning model with adaptive window (CDL-AW) is designed, and a corresponding enhancement-based convolutional dictionary learning network (called ECDAW-Net) is constructed to unfold the CDL-AW model iteratively using the proximal gradient descent technique. METHODS: In detail, the adaptive window-constrained convolutional dictionary atom is proposed to alleviate spectrum leakage caused by data truncation during convolution. Furthermore, in the ECDAW-Net, a multi-scale edge extraction module that consists of LoG and Sobel convolution layers is proposed in the unfolding iteration, to supplement lost textures and details. Additionally, to further improve the detail retention ability, the ECDAW-Net is trained by the compound loss function of the pixel-level MSE loss and the proposed patch-level loss, which can assist to retain richer structural information. RESULTS: Applying ECDAW-Net to the Mayo dataset, we obtained the highest peak signal-to-noise ratio (33.94) and sub-optimal structural similarity (0.92). CONCLUSIONS: Compared with some state-of-art methods, the interpretable ECDAW-Net performs well in suppressing noise/artifacts and preserving textures of tissue.

Improved deep convolutional dictionary learning with no noise parameter for low-dose CT image processing.

BACKGROUND: Low-Dose computed tomography (LDCT) reduces radiation damage to patients, however, the reconstructed images contain severe noise, which affects doctors' diagnosis of the disease. The convolutional dictionary learning has the advantage of the shift-invariant property. The deep convolutional dictionary learning algorithm (DCDicL) combines deep learning and convolutional dictionary learning, which has great suppression effects on Gaussian noise. However, applying DCDicL to LDCT images cannot get satisfactory results. OBJECTIVE: To address this challenge, this study proposes and tests an improved deep convolutional dictionary learning algorithm for LDCT image processing and denoising. METHODS: First, we use a modified DCDicL algorithm to improve the input network and make it do not need to input noise intensity parameter. Second, we use DenseNet121 to replace the shallow convolutional network to learn the prior on the convolutional dictionary, which can obtain more accurate convolutional dictionary. Last, in the loss function, we add MSSIM to enhance the detail retention ability of the model. RESULTS: The experimental results on the Mayo dataset show that the proposed model obtained an average value of 35.2975 dB in PSNR, which is 0.2954 -1.0573 dB higher than the mainstream LDCT algorithm, indicating the excellent denoising performance. CONCLUSION: The study demonstrates that the proposed new algorithm can effectively improve the quality of LDCT images acquired in the clinical practice.

Compound feature attention network with edge enhancement for low-dose CT denoising.

BACKGROUND: Low-dose CT (LDCT) images usually contain serious noise and artifacts, which weaken the readability of the image. OBJECTIVE: To solve this problem, we propose a compound feature attention network with edge enhancement for LDCT denoising (CFAN-Net), which consists of an edge-enhanced module and a proposed compound feature attention block (CFAB). METHODS: The edge enhancement module extracts edge details with the trainable Sobel convolution. CFAB consists of an interactive feature learning module (IFLM), a multi-scale feature fusion module (MFFM), and a joint attention module (JAB), which removes noise from LDCT images in a coarse-to-fine manner. First, in IFLM, the noise is initially removed by cross-latitude interactive judgment learning. Second, in MFFM, multi-scale and pixel attention are integrated to explore fine noise removal. Finally, in JAB, we focus on key information, extract useful features, and improve the efficiency of network learning. To construct a high-quality image, we repeat the above operation by cascading CFAB. RESULTS: By applying CFAN-Net to process the 2016 NIH AAPM-Mayo LDCT challenge test dataset, experiments show that the peak signal-to-noise ratio value is 33.9692 and the structural similarity value is 0.9198. CONCLUSIONS: Compared with several existing LDCT denoising algorithms, CFAN-Net effectively preserves the texture of CT images while removing noise and artifacts.

Edge feature extraction-based dual CNN for LDCT denoising.

In low-dose computed tomography (LDCT) denoising tasks, it is often difficult to balance edge/detail preservation and noise/artifact reduction. To solve this problem, we propose a dual convolutional neural network (CNN) based on edge feature extraction (Ed-DuCNN) for LDCT. Ed-DuCNN consists of two branches. One branch is the edge feature extraction subnet (Edge_Net) that can fully extract the edge details in the image. The other branch is the feature fusion subnet (Fusion_Net) that introduces an attention mechanism to fuse edge features and noisy image features. Specifically, first, shallow edge-specific detail features are extracted by trainable Sobel convolutional blocks and then are integrated into Edge_Net together with the LDCT images to obtain deep edge detail features. Finally, the input image, shallow edge detail, and deep edge detail features are fused in Fusion_Net to generate the final denoised image. The experimental results show that the proposed Ed-DuCNN can achieve competitive performance in terms of quantitative metrics and visual perceptual quality compared with that of state-of-the-art methods.

Low-dose CT noise reduction based on local total variation and improved wavelet residual CNN.

BACKGROUND: Low-dose computed tomography (LDCT) is an effective method for reducing radiation exposure. However, reducing radiation dose leads to considerable noise in the reconstructed image that can affect doctor's judgment. OBJECTIVE: To solve this problem, this study proposes a local total variation and improved wavelet residual convolutional neural network (LTV-WRCNN) denoising model. METHODS: The model first introduces local total variation (LTV) to decompose the LDCT image into cartoon and texture image. Next, the texture image is filtered using the non-local mean (NLM). Then, the cartoon image is added to the filtered texture image to obtain the preprocessing image. Finally, the pre-processed image is fed into the improved wavelet residual neural network (WRCNN) to obtain an improved image. Additionally, we also introduce a compound loss in wavelet domain that combines mean squared error loss and directional regularization loss to separate the structural details from noise more thoroughly. RESULTS: Compared with state-of-the-art methods, the peak-signal-to-noise ratio (PSNR) value and the structure similarity (SSIM) value of the processed CT images using the new proposed model are 33.4229 dB and 0.9158. Study also shows that applying new model obtains better results visually and numerically, especially in terms of the preservation of structural details. CONCLUSIONS: The proposed new model is feasible and effective in improving the quality of LDCT images.

Sparse angle CT reconstruction based on group sparse representation.

OBJECTIVE: In order to solve the problem of image quality degradation of CT reconstruction under sparse angle projection, we propose to develop and test a new sparse angle CT reconstruction method based on group sparse. METHODS: In this method, the group-based sparse representation is introduced into the statistical iterative reconstruction framework as a regularization term to construct the objective function. The group-based sparse representation no longer takes a single patch as the minimum unit of sparse representation, while it uses Euclidean distance as a similarity measure, thus it divides similar patch into groups as basic units for sparse representation. This method fully considers the local sparsity and non-local self-similarity of image. The proposed method is compared with several commonly used CT image reconstruction methods including FBP, SART, SART-TV and GSR-SART with experiments carried out on Sheep_Logan phantom and abdominal and pelvic images. RESULTS: In three experiments, the visual effect of the proposed method is the best. Under 64 projection angles, the lowest RMSE is 0.004776 and the highest VIF is 0.948724. FSIM and SSIM are all higher than 0.98. Under 50 projection angles, the index of the proposed method remains achieving the best image quality. CONCLUSION: Qualitative and quantitative results of this study demonstrate that this new proposed method can not only remove strip artifacts, but also effectively protect image details.

Spark plug defects detection based on improved Faster-RCNN algorithm.

The objective of this study is to apply an improved Faster-RCNN model in order to solve the problems of low detection accuracy and slow detection speed in spark plug defect detection. In detail, an attention module based symmetrical convolutional network (ASCN) is designed as the backbone to extract multi-scale features. Then, a multi-scale region generation network (MRPN), in which InceptionV2 is used to achieve sliding windows of different scales instead of a single sliding window, is proposed and tested. Additionally, a dataset of X-ray spark plug images is established, which contains 1,402 images. These images are divided into two subsets with a ratio of 4:1 for training and testing the improved Faster-RCNN model, respectively. The proposed model is transferred and learned on the pre-training model of MS COCO dataset. In the test experiments, the proposed method achieves an average accuracy of 89% and a recall of 97%. Compared with other Faster-RCNN models, YOLOv3, SSD and RetinaNet, our proposed new method improves the average accuracy by more than 6% and the recall by more than 2%. Furthermore, the new method can detect at 20fps when the input image size is 1024×1024×3 and can also be used for real-time automatic detection of spark plug defects.

Research on Target Deviation Measurement of Projectile Based on Shadow Imaging Method in Laser Screen Velocity Measuring System.

In the laser screen velocity measuring (LSVM) system, there is a deviation in the consistency of the optoelectronic response between the start light screen and the stop light screen. When the projectile passes through the light screen, the projectile's over-target position, at which the timing pulse of the LSVM system is triggered, deviates from the actual position of the light screen (i.e., the target deviation). Therefore, it brings errors to the measurement of the projectile's velocity, which has become a bottleneck, affecting the construction of a higher precision optoelectronic velocity measuring system. To solve this problem, this paper proposes a method based on high-speed shadow imaging to measure the projectile's target deviation, ΔS, when the LSVM system triggers the timing pulse. The infrared pulse laser is collimated by the combination of the aspherical lens to form a parallel laser source that is used as the light source of the system. When the projectile passes through the light screen, the projectile's over-target signal is processed by the specially designed trigger circuit. It uses the rising and falling edges of this signal to trigger the camera and pulsed laser source, respectively, to ensure that the projectile's over-target image is adequately exposed. By capturing the images of the light screen of the LSVM system and the over-target projectile separately, this method of image edge detection was used to calculate the target deviation, and this value was used to correct the target distance of the LSVM to improve the accuracy of the measurement of the projectile's velocity.

[Study of clustered damage in DNA after proton irradiation based on density-based spatial clustering of applications with noise algorithm].

The deoxyribonucleic acid (DNA) molecule damage simulations with an atom level geometric model use the traversal algorithm that has the disadvantages of quite time-consuming, slow convergence and high-performance computer requirement. Therefore, this work presents a density-based spatial clustering of applications with noise (DBSCAN) clustering algorithm based on the spatial distributions of energy depositions and hydroxyl radicals (·OH). The algorithm with probability and statistics can quickly get the DNA strand break yields and help to study the variation pattern of the clustered DNA damage. Firstly, we simulated the transportation of protons and secondary particles through the nucleus, as well as the ionization and excitation of water molecules by using Geant4-DNA that is the Monte Carlo simulation toolkit for radiobiology, and got the distributions of energy depositions and hydroxyl radicals. Then we used the damage probability functions to get the spatial distribution dataset of DNA damage points in a simplified geometric model. The DBSCAN clustering algorithm based on damage points density was used to determine the single-strand break (SSB) yield and double-strand break (DSB) yield. Finally, we analyzed the DNA strand break yield variation trend with particle linear energy transfer (LET) and summarized the variation pattern of damage clusters. The simulation results show that the new algorithm has a faster simulation speed than the traversal algorithm and a good precision result. The simulation results have consistency when compared to other experiments and simulations. This work achieves more precise information on clustered DNA damage induced by proton radiation at the molecular level with high speed, so that it provides an essential and powerful research method for the study of radiation biological damage mechanism.

Inverse problem based on the fast alternating direction method of multipliers algorithm in multiangle total internal reflection fluorescence microscopy.

Multiangle total internal reflection fluorescence microscopy (TIRFM) has become one of the most important techniques for achieving axial superresolution. The key process in this technique is solving the inverse problem. This paper applies an improved alternating direction method of multipliers algorithm to solve the inverse problem and validates the accuracy of the algorithm by reconstructing simulated microtubule structures in multiangle TIRFM images. The reconstruction times for different algorithms and the convergence speeds of the improved and original algorithms are compared. Experimental results show that the improved algorithm can achieve an axial resolution of 40 nm, reduce the influence of the penalty parameter on convergence, and improve the convergence speed of the iterative process while ensuring image reconstruction quality. Based on the algorithm, a three-dimensional image with the depth information of microtubules and mitochondria is reconstructed.

Correction: Yan, L., et al. A Micro Bubble Structure Based Fabry⁻Perot Optical Fiber Strain Sensor with High Sensitivity and Low-Cost Characteristics Sensors, 2017, 17, 555.

An correction is presented to correct Figure 5a in [Sensors, 2017, 17, 555].

Three novel accurate pixel-driven projection methods for 2D CT and 3D EPR imaging.

OBJECTIVES: This work aims to explore more accurate pixel-driven projection methods for iterative image reconstructions in order to reduce high-frequency artifacts in the generated projection image. METHODS: Three new pixel-driven projection methods namely, small-pixel-large-detector (SPLD), linear interpolation based (LIB) and distance anterpolation based (DAB), were proposed and applied to reconstruct images. The performance of these methods was evaluated in both two-dimensional (2D) computed tomography (CT) images via the modified FORBILD phantom and three-dimensional (3D) electron paramagnetic resonance (EPR) images via the 6-spheres phantom. Specifically, two evaluations based on projection generation and image reconstruction were performed. For projection generation, evaluation was using a 2D disc phantom, the modified FORBILD phantom and the 6-spheres phantom. For image reconstruction, evaluations were performed using the FORBILD and 6-spheres phantom. During evaluation, 2 quantitative indices of root-mean-square-error (RMSE) and contrast-to-noise-ratio (CNR) were used. RESULTS: Comparing to the use of ordinary pixel-driven projection method, RMSE of the SPLD based least-square algorithm was reduced from 0.0701 to 0.0384 and CNR was increased from 5.6 to 19.47 for 2D FORBILD phantom reconstruction. For 3D EPRI, RMSE of SPLD was also reduced from 0.0594 to 0.0498 and CNR was increased from 3.88 to 11.58. In addition, visual evaluation showed that images reconstructed in both 2D and 3D images suffered from high-frequency line-shape artifacts when using the ordinary pixel-driven projection method. However, using 3 new methods all suppressed the artifacts significantly and yielded more accurate reconstructions. CONCLUSIONS: Three proposed pixel-driven projection methods achieved more accurate iterative image reconstruction results. These new and more accurate methods can also be easily extended to other imaging modalities. Among them, SPLD method should be recommended to 3D and four dimensional (4D) EPR imaging.

[A gradient-based direct aperture optimization].

Aiming at the disadvantages of traditional direct aperture optimization (DAO) method, such as slow convergence rate, prone to stagnation and weak global searching ability, a gradient-based direct aperture optimization (GDAO) is proposed. In this work, two different optimization methods are used to optimize the shapes and the weights of the apertures. Firstly, in order to improve the validity of the aperture shapes optimization of each search, the traditional simulated annealing (SA) algorithm is improved, the gradient is introduced to the algorithm. The shapes of the apertures are optimized by the gradient based SA method. At the same time, the constraints between the leaves of multileaf collimator (MLC) have been fully considered, the optimized aperture shapes are meeting the requirements of clinical radiation therapy. After that, the weights of the apertures are optimized by the limited-memory BFGS for bound-constrained (L-BFGS-B) algorithm, which is simple in calculation, fast in convergence rate, and suitable for solving large scale constrained optimization. Compared with the traditional SA algorithm, the time cost of this program decreased by 15.90%; the minimum dose for the planning target volume was improved by 0.29%, the highest dose for the planning target volume was reduced by 0.45%; the highest dose for the bladder and rectum, which are the organs at risk, decreased by 0.25% and 0.09%, respectively. The results of experiment show that the new algorithm can produce highly efficient treatment planning a short time and can be used in clinical practice.

A High-Sensitive Pressure Sensor Using a Single-Mode Fiber Embedded Microbubble with Thin Film Characteristics.

A new fiber pressure sensor is proposed and analyzed in this paper. A commercial arc fusion splicer and pressure-assisted arc discharge technology are used here to fabricate a silica hollow microbubble from a common glass tube with the characteristics of a thin film. Then the single mode fiber is embedded into the microbubble to form a fiber Fabry-Perot interferometer by measuring the reflected interference spectrum from the fiber tip and microbubble end. As the wall thickness of the micro-bubble can reach up to several micrometers, it can then be used for measuring the outer pressure with high sensitivity. The fabrication method has the merits of being simple, low in cost, and is easy to control. Experimental results show that its pressure sensitivity can reach 164.56 pm/kPa and the temperature sensitivity can reach 4 pm/°C. Therefore, it also has the advantage of being insensitive to temperature fluctuation.