Regional gene expression analysis of multiple tissues in an experimental animal model of post-traumatic osteoarthritis.

OBJECTIVE: To characterize local disease progression of the medial meniscus transection (MMT) model of post-traumatic osteoarthritis (OA) at the molecular level, in order to establish a baseline for therapeutic testing at the preclinical stage. DESIGN: Weight-matched male Lewis rats underwent MMT or sham surgery on the left limb with the right leg as contralateral control. At 1 and 3 weeks post-surgery, tissues were harvested from different areas of the articular cartilage (medial and lateral tibial plateaus, and medial osteophyte region) and synovium (medial and lateral), and analyzed separately. RNA was extracted and used for microarray (RT-PCR) analysis. RESULTS: Gene expression changes due to surgery were isolated to the medial side of the joint. Gene changes in chondrocyte phenotype of the medial tibial plateau cartilage preceded changes in tissue composition genes. Differences in inflammatory markers were only observed at the osteophyte region at 3 weeks post-surgery. There was surgical noise in the synovium at week 1, which dissipated at week 3. At this later timepoint, meniscal instability resulted in elevated expression of matrix degradation proteins and osteogenic markers in the synovium and cartilage. CONCLUSION: These results suggest feedback interactions between joint tissues during disease progression. Regional tissue expression differences found in MMT joints indicated similar pathophysiology to human OA, and provided novel insights about this degeneration model. The examination of gene expression at a localized level in multiple tissues provides a well-characterized baseline to evaluate mechanistic effects of potential therapeutic agents on OA disease progression in the MMT model.

Contrast enhanced µCT imaging of early articular changes in a pre-clinical model of osteoarthritis.

OBJECTIVE: The objective of this study was to characterize early osteoarthritis (OA) development in cartilage and bone tissues in the rat medial meniscus transection (MMT) model using non-destructive equilibrium partitioning of an ionic contrast agent micro-computed tomography (EPIC-µCT) imaging. Cartilage fibrillation, one of the first physiological developments in OA, was quantified in the rat tibial plateau as three-dimensional (3D) cartilage surface roughness using a custom surface-rendering algorithm. METHODS: Male Lewis rats underwent MMT or sham-operation in the left leg. At 1- and 3-weeks post-surgery, the animals (n = 7-8 per group) were euthanized and the left legs were scanned using EPIC-µCT imaging to quantify cartilage and bone parameters. In addition, a custom algorithm was developed to measure the roughness of 3D surfaces. This algorithm was validated and used to quantify cartilage surface roughness changes as a function of time post-surgery. RESULTS: MMT surgery resulted in significantly greater cartilage damage and subchondral bone sclerosis with the damage increasing in both severity and area from 1- to 3-weeks post-surgery. Analysis of rendered 3D surfaces could accurately distinguish early changes in joints developing OA, detecting significant increases of 45% and 124% in surface roughness at 1- and 3-weeks post-surgery respectively. CONCLUSION: Disease progression in the MMT model progresses sequentially through changes in the cartilage articular surface, extracellular matrix composition, and then osteophyte mineralization and subchondral bone sclerosis. Cartilage surface roughness is a quantitative, early indicator of degenerative joint disease in small animal OA models and can potentially be used to evaluate therapeutic strategies.

Quantitative pre-clinical screening of therapeutics for joint diseases using contrast enhanced micro-computed tomography.

OBJECTIVE: The development of effective therapies for cartilage protection has been limited by a lack of efficient quantitative cartilage imaging modalities in pre-clinical in vivo models. Our objectives were two-fold: first, to validate a new contrast-enhanced 3D imaging analysis technique, equilibrium partitioning of an ionic contrast agent-micro computed tomography (EPIC-µCT), in a rat medial meniscal transection (MMT) osteoarthritis (OA) model; and second, to quantitatively assess the sensitivity of EPIC-µCT to detect the effects of matrix metalloproteinase inhibitor (MMPi) therapy on cartilage degeneration. METHODS: Rats underwent MMT surgery and tissues were harvested at 1, 2, and 3 weeks post-surgery or rats received an MMPi or vehicle treatment and tissues harvested 3 weeks post-surgery. Parameters of disease progression were evaluated using histopathology and EPIC-µCT. Correlations and power analyses were performed to compare the techniques. RESULTS: EPIC-µCT was shown to provide simultaneous 3D quantification of multiple parameters, including cartilage degeneration and osteophyte formation. In MMT animals treated with MMPi, OA progression was attenuated, as measured by 3D parameters such as lesion volume and osteophyte size. A post-hoc power analysis showed that 3D parameters for EPIC-µCT were more sensitive than 2D parameters requiring fewer animals to detect a therapeutic effect of MMPi. 2D parameters were comparable between EPIC-µCT and histopathology. CONCLUSION: This study demonstrated that EPIC-µCT has high sensitivity to provide 3D structural and compositional measurements of cartilage and bone in the joint. EPIC-µCT can be used in combination with histology to provide a comprehensive analysis to screen new potential therapies.

Localized 3D analysis of cartilage composition and morphology in small animal models of joint degeneration.

OBJECTIVE: Current histological scoring methods to evaluate efficacy of potential therapeutics for slowing or preventing joint degeneration are time-consuming and semi-quantitative in nature. Hence, there is a need to develop and standardize quantitative outcome measures to define sensitive metrics for studying potential therapeutics. The objectives of this study were to use equilibrium partitioning of an ionic contrast agent via Equilibrium Partitioning of an Ionic Contrast-Microcomputed tomography (EPIC-µCT) to quantitatively characterize morphological and compositional changes in the tibial articular cartilage in two distinct models of joint degeneration and define localized regions of interest to detect degenerative cartilage changes. MATERIALS AND METHODS: The monosodium iodoacetate (MIA) and medial meniscal transection (MMT) rat models were used in this study. Three weeks post-surgery, tibiae were analyzed using EPIC-µCT and histology. EPIC-µCT allowed measurement of 3D morphological changes in cartilage thickness, volume and composition. RESULTS: Extensive cartilage degeneration was observed throughout the joint in the MIA model after 3 weeks. In contrast, the MMT model showed more localized degeneration with regional thickening of the medial tibial plateau and a decrease in attenuation consistent with proteoglycan (PG) depletion. Focal lesions were also observed and 3D volume calculated as an additional outcome metric. CONCLUSIONS: EPIC-µCT was used to quantitatively assess joint degeneration in two distinct preclinical models. The MMT model showed similar features to human Osteoarthritis (OA), including localized lesion formation and PG loss, while the MIA model displayed extensive cartilage degeneration throughout the joint. EPIC-µCT imaging provides a rapid and quantitative screening tool for preclinical evaluation of OA therapeutics.

Biomimetic tubular nanofiber mesh and platelet rich plasma-mediated delivery of BMP-7 for large bone defect regeneration.

There is a growing need for successful bone tissue engineering strategies and advanced biomaterials that mimic the structure and function of native tissues carry great promise. Successful bone repair approaches may include an osteoconductive scaffold, osteoinductive growth factors, cells with an osteogenic potential and capacity for graft vascularisation. To increase osteoinductivity of biomaterials, the local combination and delivery of growth factors has been developed. In the present study we investigated the osteogenic effects of calcium phosphate (CaP)-coated nanofiber mesh tube-mediated delivery of BMP-7 from a PRP matrix for the regeneration of critical sized segmental bone defects in a small animal model. Bilateral full-thickness diaphyseal segmental defects were created in twelve male Lewis rats and nanofiber mesh tubes were placed around the defect. Defects received either treatment with a CaP-coated nanofiber mesh tube (n = 6), an un-coated nanofiber mesh tube (n=6) a CaP-coated nanofiber mesh tube with PRP (n=6) or a CaP-coated nanofiber mesh tube in combination with 5 µg BMP-7 and PRP (n = 6). After 12 weeks, bone volume and biomechanical properties were evaluated using radiography, microCT, biomechanical testing and histology. The results demonstrated significantly higher biomechanical properties and bone volume for the BMP group compared to the control groups. These results were supported by the histological evaluations, where BMP group showed the highest rate of bone regeneration within the defect. In conclusion, BMP-7 delivery via PRP enhanced functional bone defect regeneration, and together these data support the use of BMP-7 in the treatment of critical sized defects.

Three years of alendronate treatment does not continue to decrease microstructural stresses and strains associated with trabecular microdamage initiation beyond those at 1 year.

UNLABELLED: The effects of a 3-year alendronate treatment on trabecular stresses/strains associated with microdamage initiation were investigated using finite element modeling (FEM). Severely damaged trabeculae in the low-dose treatment group were associated with increased stresses compared with the high-dose treatment group (p = 0.006) and approached significance in the control group (p = 0.02). INTRODUCTION: Alendronate, a commonly prescribed anti-remodeling agent, decreases fracture risk in the vertebrae, hip, and wrist of osteoporotic individuals. However, evaluation of microdamage accumulation in animal and human studies shows increased microdamage density relative to controls. Microstructural von Mises stresses associated with severe and linear damage have been found to decrease after 1 year of alendronate treatment. In the present study, stresses/strains associated with damage were assessed after 3 years of treatment to determine whether they continued to decrease with increased treatment duration. METHODS: Microdamaged trabeculae visualized with fluorescent microscopy were associated with stresses and strains obtained using image-based FEM. Stresses/strains associated with severe, diffuse, and linearly damaged and undamaged trabeculae were compared among groups treated for 3 years with an osteoporotic treatment dose of alendronate, a Paget's disease treatment dose of alendronate, or saline control. Architectural characteristics and mineralization were also analyzed from three-dimensional microcomputed tomography reconstructed images. RESULTS: Severely damaged trabeculae in the osteoporotic treatment dose group were associated with increased stress compared with the Paget's disease treatment dose group (p = 0.006) and approached significance compared to the control group (p = 0.02). Trabecular mineralization in severely damaged trabeculae of the low-dose treatment group was significantly greater compared to severely damaged trabeculae in the high-dose treatment and control group, suggesting that changes at the tissue level may play a role in these findings. CONCLUSIONS: Trabecular level stresses associated with microdamage do not continue to decrease with prolonged alendronate treatment. Changes in mineralization may account for these findings.

Prednisolone treatment and restricted physical activity further compromise bone of mdx mice.

OBJECTIVES: The purpose of this study was to determine the extent to which prednisolone treatment and restricted physical activity caused deleterious changes in inherently compromised mdx bone. METHODS: Four week-old male mdx mice (n=36) were treated for 8-wk either with or without prednisolone (0.8-1.3 mg/kg/d) and were housed in traditional or small cages (restricted activity). Tibial bone strength, geometry, and intrinsic material properties were assessed at the mid-shaft by three-point bending and micro-computed tomography (µCT). RESULTS: Three-point bending results showed that both prednisolone and restricted activity reduced bone strength (7%), however stiffness was only reduced in restricted-activity mice. µCT analyses showed that cortical bone area and cortical thickness were 13% smaller in restricted-activity mice, and may have accounted for their compromised bone strength. Intrinsic material properties, including volumetric bone mineral density (vBMD) and modulus of elasticity, were not impacted by either treatment, however, vBMD tended to be lower in restricted-activity mice (p=0.06). CONCLUSIONS: These data show that prednisolone treatment and restricted physical activity independently accentuate reductions in the strength and geometry of mdx bone, but do not influence intrinsic material properties.

Nondestructive assessment of sGAG content and distribution in normal and degraded rat articular cartilage via EPIC-microCT.

OBJECTIVE: The objective of this study was to evaluate the feasibility of quantifying the Equilibrium Partitioning of an Ionic Contrast agent via Microcomputed Tomography (EPIC-microCT) to nondestructively assess sulfated glycosaminoglycan (sGAG) content and distribution in rat articular cartilage ex vivo, and in doing so to establish a paradigm for extension of this technique to other small animal models. DESIGN: After determination of an appropriate incubation time for the anionic contrast agent, EPIC-microCT was used to examine age-related differences in cartilage sGAG content between 4-, 8-, and 16-week old (n=5 each) male Wistar rats and to evaluate sGAG depletion in the right femora of each age group after 60 min of digestion with chondroitinase ABC. The EPIC-microCT measurements were validated by histological safranin-O staining, and reproducibility was evaluated by triplicate scans of six femora. RESULTS: Cartilage attenuation gradually increased with cumulative digestion time and reached a plateau at approximately 60 min with a 16.0% temporal increase (P<0.01). Average femoral articular cartilage attenuation increased by 14.2% from 4- to 8-weeks of age (P<0.01) and further increased by 2.5% from 8 to 16 weeks (P<0.05). After 60 min of digestion, femoral articular cartilage attenuations increased by 15-17% in each age group (P<0.01). Correspondingly, sGAG optical density decreased with age and digestion, and showed a linear correlation (r=-0.88, slope=-1.26, P<0.01, n=30) with EPIC-microCT cartilage attenuation. High reproducibility was indicated by a low coefficient of variation (1.5%) in cartilage attenuation. CONCLUSIONS: EPIC-microCT imaging provides high spatial resolution and sensitivity to assess sGAG content and three-dimensional distribution in rat femoral articular cartilage.

Extracellular matrix compression temporally regulates microvascular angiogenesis.

Mechanical cues influence tissue regeneration, and although vasculature is known to be mechanically sensitive, little is known about the effects of bulk extracellular matrix deformation on the nascent vessel networks found in healing tissues. Previously, we found that dynamic matrix compression in vivo potently regulated revascularization during bone tissue regeneration; however, whether matrix deformations directly regulate angiogenesis remained unknown. Here, we demonstrated that load initiation time, magnitude, and mode all regulate microvascular growth, as well as upstream angiogenic and mechanotransduction signaling pathways. Immediate load initiation inhibited angiogenesis and expression of early sprout tip cell selection genes, while delayed loading enhanced microvascular network formation and upstream signaling pathways. This research provides foundational understanding of how extracellular matrix mechanics regulate angiogenesis and has critical implications for clinical translation of new regenerative medicine therapies and physical rehabilitation strategies designed to enhance revascularization during tissue regeneration.

Quantitative assessment of articular cartilage morphology via EPIC-microCT.

OBJECTIVE: The objective of the present study was to validate the ability of Equilibrium Partitioning of an Ionic Contrast agent via microcomputed tomography (EPIC-microCT) to nondestructively assess cartilage morphology in the rat model. DESIGN: An appropriate contrast agent (Hexabrix) concentration and incubation time for equilibration were determined for reproducible segmentation of femoral articular cartilage from contrast-enhanced microCT scans. Reproducibility was evaluated by triplicate scans of six femora, and the measured articular cartilage thickness was independently compared to thickness determined from needle probe testing and histology. The validated technique was then applied to quantify age-related differences in articular cartilage morphology between 4, 8, and 16-week-old (n=5 each) male Wistar rats. RESULTS: A 40% Hexabrix/60% phosphate buffered saline (PBS) solution with 30 min incubation was optimal for segmenting cartilage from the underlying bone tissue and other soft tissues in the rat model. High reproducibility was indicated by the low coefficient of variation (1.7-2.5%) in cartilage volume, thickness and surface area. EPIC-microCT evaluation of thickness showed a strong linear relationship and good agreement with both needle probing (r(2)=0.95, slope=0.81, P<0.01, mean difference 11+/-22 microm, n=43) and histology (r(2)=0.99, slope=0.97, P<0.01, mean difference 12+/-10 microm, n=30). Cartilage volume and thickness significantly decreased with age while surface area significantly increased. CONCLUSION: EPIC-microCT imaging has the ability to nondestructively evaluate three-dimensional articular cartilage morphology with high precision and accuracy in a small animal model.

Biomaterial strategies for controlling stem cell fate via morphogen sequestration.

Protein sequestration plays an essential role in maintaining stem cell populations in the native stem cell niche. Both pluripotent and adult stem cells require the sustained presentation of numerous bioactive growth factors and other soluble cues to potentiate cell fate decisions and morphogenic events. Consequently, methods of natural protein sequestration employed by the stem cell niche present attractive strategies for developing novel protein delivery vehicles and engineering biomimetic stem cell microenvironments that enhance morphogen bioactivity. In this review, we will explore the role of protein sequestration in the native stem cell niche and how it has inspired the design of several classes of materials that exploit natural protein sequestration to effectively maintain stem cell populations and direct stem cell fate. We will also highlight several recent developments in protein sequestering biomaterials, in which material strategies to sequester complex mixtures of endogenously secreted proteins are also being investigated.

Influence of scaffold properties on the inter-relationship between human bone marrow derived stromal cells and endothelial cells in pro-osteogenic conditions.

One of the significant challenges in bone tissue engineering is the integration of biomaterials designed to facilitate and stimulate mineralization with a simultaneously rapid rate of angiogenesis and vascularization of the tissue construct, a challenge complicated by our lack of knowledge of the interactions among key cell types and scaffold properties. This study compared functional activity of human bone marrow-derived stromal cells (hMSC) seeded onto a porous salt-leached poly(D,L-lactic acid) (PDLLA) scaffolds, with and without the incorporation of silk fibroin fibers and then further investigated their co-culture with human umbilical vein endothelial cells (HUVECs). Cell viability, proliferation, and alkaline phosphatase activity were measured for a range of time points in culture, with osteogenic and angiogenic marker immunolocalization and gene expression at selected stages. Our findings suggest that, despite similar porosity and pore size distribution exhibited by the PDLLA and PDLLA plus silk fibroin scaffolds, there were marked differences in cell distribution and function. In the absence of fibers, a highly osteogenic response was observed in hMSCs in the scaffolds co-cultured with endothelial cells, greater than that observed with hMSCs alone or in either of the scaffolds with fibers added. However, fiber presence clearly better supported endothelial cell cultures, as determined by greater levels of endothelial marker expression at both the gene and protein level after 3 weeks of culture. The design of composite scaffolds integrating beneficial components of differing structures and materials to facilitate appropriate biological responses appears a promising yet challenging avenue of research. STATEMENT OF SIGNIFICANCE: A significant challenge in bone tissue engineering is to promote a rapid vascularization of the tissue construct in parallel to the extracellular matrix mineralization. The design of composite scaffolds integrating beneficial components of differing structures and materials to facilitate appropriate biological responses appears a promising yet challenging avenue of research. Here we investigated cultures of hMSCs and HUVECs on a silk fibroin enhanced PDLLA scaffold, showing that the final output of this in vitro system is not the linear sum of the effects of the single variables. These results are of interest as they demonstrate how the addition of endothelial cells can affect hMSC phenotype and that the output can be further modulated by the introduction of silk fibroin fibers.

Mechanical stimulation of tissue repair in the hydraulic bone chamber.

A hydraulically activated bone chamber model was utilized to investigate cellular and microstructural mechanisms of mechanical adaptation during bone repair. Woven trabecular bone and fibrotic granulation tissue filled the initially empty chambers by 8 weeks postimplantation into canine tibial and femoral metaphyses. Without mechanical stimulation, active bone remodeling to lamellar trabecular bone and reconstitution of marrow elements were observed between 8 and 24 weeks. In subsequent loading studies, the hydraulic mechanism was activated on one randomly chosen side of 10 dogs following 8 weeks of undisturbed bone repair. The loading treatment applied an intermittent compressive force (18 N, 1.0 Hz, 1800 cycles/day) for durations of a few days up to 12 weeks. Stereological analysis of three-dimensional microcomputed tomography images revealed an increase in trabecular plate thickness and connectivity associated with the loaded repair tissue microstructure relative to unloaded contralateral controls. These microstructural alterations corresponded to an over 600% increase in the apparent modulus of the loaded bone tissue. A significant increase in the percentage of trabecular surfaces lined by osteoblasts immunopositive for type I procollagen after a few days of loading provided further evidence for mechanical stimulation of bone matrix synthesis. The local principal tissue strains associated with these adaptive changes were estimated to range from approximately -2000 to +3000 mustrain using digital image-based finite element methods. This study demonstrates the sensitivity of bone tissue and cells to a controlled in vivo mechanical stimulus and identifies microstructural mechanisms of mechanical adaptation during bone repair. The hydraulic bone chamber is introduced as an efficient experimental model to study the effects of mechanical and biological factors on bone repair and regeneration.

Mechanical properties of a novel PVA hydrogel in shear and unconfined compression.

Poly(vinyl alcohol) (PVA) hydrogels have been proposed as promising biomaterials to replace diseased or damaged articular cartilage. A critical barrier to their use as load-bearing tissue replacements is a lack of sufficient mechanical properties. The purpose of this study was to characterize the functional compressive and shear mechanical properties of a novel PVA hydrogel. Two formulations of the biomaterial were tested, one with a lower water content (75% water), and the other with higher water content (80% water). The compressive tangent modulus varied with biomaterial formulation and was found to be statistically strain magnitude and rate dependent. Over a strain range of 10-60%, the compressive modulus increased from approximately 1-18 MPa, which is within the range of the modulus of articular cartilage. The shear tangent modulus (0.1-0.4 MPa) was also found to be strain magnitude dependent and within the range of normal human articular cartilage, but it was not statistically dependent on strain rate, This behavior was attributed to the dominance of fluid flow and related frictional drag on the viscoelastic behavior. Compressive failure of the hydrogels was found to occur between 45 and 60% strain, depending on water content.

Relative effects of wound healing and mechanical stimulus on early bone response to porous-coated implants.

We hypothesized that early bone adaptation to well fixed porous-coated implants is influenced more by wound healing than by mechanical loading. To test this hypothesis, two groups of dogs with identical, hydraulically controlled porous-coated implants interference fit within distal femoral trabecular bone were used. One group had no load: the other had 35 N of load applied to the implants. At 5 weeks after surgery, the resulting adaptation of bone around the implants was quantified on a cellular basis by cytochemical analysis of type-I procollagen synthesis and on a structural basis using three-dimensional micro-computed tomography imaging. The percentage of trabecular surfaces covered by osteoblasts expressing type-I procollagen was significantly increased in bone surrounding the implant in both groups compared with contralateral control bone tissue. There was no difference between the groups with no load or 35 N of load. In addition, measures of trabecular bone structure did not differ significantly between the load and no-load groups. Taken together, these results suggest that wound healing plays a much greater role in the early response of bone to well fixed porous-coated implants than does mechanical stimulus.

Improving the local solution accuracy of large-scale digital image-based finite element analyses.

Digital image-based finite element modeling (DIBFEM) has become a widely utilized approach for efficiently meshing complex biological structures such as trabecular bone. While DIBFEM can provide accurate predictions of apparent mechanical properties, its application to simulate local phenomena such as tissue failure or adaptation has been limited by high local solution errors at digital model boundaries. Furthermore, refinement of digital meshes does not necessarily reduce local maximum errors. The purpose of this study was to evaluate the potential to reduce local mean and maximum solution errors in digital meshes using a post-processing filtration method. The effectiveness of a three-dimensional, boundary-specific filtering algorithm was found to be mesh size dependent. Mean absolute and maximum errors were reduced for meshes with more than five elements through the diameter of a cantilever beam considered representative of a single trabecula. Furthermore, mesh refinement consistently decreased errors for filtered solutions but not necessarily for non-filtered solutions. Models with more than five elements through the beam diameter yielded absolute mean errors of less than 15% for both Von Mises stress and maximum principal strain. When applied to a high-resolution model of trabecular bone microstructure, boundary filtering produced a more continuous solution distribution and reduced the predicted maximum stress by 30%. Boundary-specific filtering provides a simple means of improving local solution accuracy while retaining the model generation and numerical storage efficiency of the DIBFEM technique.

Trabecular bone adaptation to variations in porous-coated implant topology.

Trabecular bone adaptation adjacent to porous-coated platen implants embedded within canine distal femoral metaphyses was evaluated following 24 weeks of daily compressive loading. The in vivo experimental model delivered controlled loads to five different platen implant topologies with variations in platen shape and porous coating distribution. Adaptive changes were evaluated based on three-dimensional stereological analyses of trabecular bone architecture underneath each platen and non-destructive mechanical tests of platen construct stiffness. Fully coated cylindrical platen designs possessed the highest construct stiffness in both tension and compression. Changes in local trabecular bone morphology were also found to be significantly influenced by platen implant topology. Cylindrical platens with fully coated bottom surfaces were associated with greater decreases in trabecular bone volume and connectivity than cylindrical platens with smooth bottom surfaces or fully coated conical platens. Comparisons to site-matched contralateral control bone volumes across all platen designs indicated significant decreases in the average bone volume fraction, trabecular plate number, and connectivity within experimental samples, but no change in trabecular plate thickness. In addition, analyses of microstructural anisotropy revealed a 20 degrees or 20.2 degrees trabecular reorientation towards the axis of loading in experimental tissue. This study demonstrates that trabecular bone adaptation near porous-coated surfaces is influenced by variations in local implant topology and provides insight into specific mechanisms of implant-mediated microstructural adaptation.

Contrast-enhanced microCT (EPIC-µCT) ex vivo applied to the mouse and human jaw joint.

OBJECTIVES: The temporomandibular joint (TMJ) is susceptive to the development of osteoarthritis (OA). More detailed knowledge of its development is essential to improve our insight into TMJ-OA. It is imperative to have a standardized reliable three-dimensional (3D) imaging method that allows for detailed assessment of both bone and cartilage in healthy and diseased joints. We aimed to determine the applicability of a contrast-enhanced microCT (µCT) technique for ex vivo research of mouse and human TMJs. METHODS: Equilibrium partitioning of an ionic contrast agent via µCT (EPIC-µCT) was previously applied for cartilage assessment in the knee joint. The method was ex vivo, applied to the mouse TMJ and adapted for the human TMJ. RESULTS: EPIC-µCT (30-min immersion time) was applied to mouse mandibular condyles, and 3D imaging revealed an average cartilage thickness of 110 ± 16 µm. These measurements via EPIC-µCT were similar to the histomorphometric measures (113 ± 19 µm). For human healthy OA-affected TMJ samples, the protocol was adjusted to an immersion time of 1 h. 3D imaging revealed a significant thicker cartilage layer in joints with early signs of OA compared with healthy joints (414.2 ± 122.6 and 239.7 ± 50.5 µm, respectively). A subsequent significant thinner layer was found in human joints with late signs of OA (197.4 ± 159.7 µm). CONCLUSIONS: The EPIC-µCT technique is effective for the ex vivo assessment of 3D cartilage morphology in the mouse as well as human TMJ and allows bone-cartilage interaction research in TMJ-OA.

The delayed addition of human mesenchymal stem cells to pre-formed endothelial cell networks results in functional vascularization of a collagen-glycosaminoglycan scaffold in vivo.

This paper demonstrates a method to engineer, in vitro, a nascent microvasculature within a collagen-glycosaminoglycan scaffold with a view to overcoming the major issue of graft failure due to avascular necrosis of tissue-engineered constructs. Human umbilical vein endothelial cells (ECs) were cultured alone and in various co-culture combinations with human mesenchymal stem cells (MSCs) to determine their vasculogenic abilities in vitro. Results demonstrated that the delayed addition of MSCs to pre-formed EC networks, whereby MSCs act as pericytes to the nascent vessels, resulted in the best developed vasculature. The results also demonstrate that the crosstalk between ECs and MSCs during microvessel formation occurs in a highly regulated, spatio-temporal fashion, whereby the initial seeding of ECs results in platelet derived growth factor (PDGF) release; the subsequent addition of MSCs 3 days later leads to a cessation in PDGF production, coinciding with increased vascular endothelial cell growth factor expression and enhanced vessel formation. Functional assessment of these pre-engineered constructs in a subcutaneous rat implant model demonstrated anastomosis between the in vitro engineered vessels and the host vasculature, with significantly increased vascularization occurring in the co-culture group. This study has thus provided new information on the process of in vitro vasculogenesis within a three-dimensional porous scaffold for tissue engineering and demonstrates the potential for using these vascularized scaffolds in the repair of critical sized bone defects.